Unable to install 4.5 update

Trying to install the Camera Raw update 4.5 and get the following error:
"The updater is unable to locate the product to be updated"
I am running PSE 6 for mac (OS X 10.4.11) on my imac
Please help!
Thanks,
Rebecca

Rebecca,
It looks like you're on a Mac.
>[WHAT IS THE ROOT OF THE LOCAL DISK? AND HOW CAN I FIND IT?]
The root level is what you see when you double-click on the icon of your hard disk in the Finder.
>(Please read directory carefully) [HOW DO I READ THE DIRECTORY?]
I'm pretty sure they meant directions, as in
Read the Directions Carefully.
>[WHY WOULD I NEED TO REVERT BACK?]
Occasionally, some users have trouble with updates. Personally, I've never had any reason to revert. so I always nuke (delete, trash) old versions of ACR immediatly when installing an update. I feel that keeping an obsolete version is akin to putting a used paper tissue in your pocket after blowing your nose instead of discarding it. That's just me.
[Relevant older versions of ACR are readily available for downloading on the Adobe site.]
>6. Copy the Camera Raw plug-in, Camera Raw, from the download into the same folder as in Step 4. [NOW I AM TOTALLY CONFUSED]
In step 4 you're going to get rid of the old ACR plug-in, and in step 6 you are going to put the new plug-in in its place.
It's really very simple and straight forward --except for that unfortunate typo where they have
directory instead of
directions and the silliness about keeping the old version of the ACR plug-in.

Similar Messages

  • Unable to install os x update, just purchased iMac

    Unable to install os x update, just purchased iMac

    You can Download the 10 6 8 Combo Update from Here:
    http://support.apple.com/kb/DL1399
    If you Purchased your iMac New... you have 90 days Free Telephone Support should you feel you need it...
    (800) APL-CARE (800-275-2273)

  • Macbook (late 2006) RSS unable to install SMC firmware update

    Hello,
    I bought my macbook on the 27th of December, and the first week it worked fine. Then started the RSS. I did some googling and found out some stuff about RSS, tried to install the SMC firmware update but it would just tell me that I don't need the update. After two weeks of constant RSS:ing I called applecare and told the guy about the problem, he told me to try to update the SMC and if I can't do it bring it in for service.
    Monday the 15th of January I went to the macstation in downtown Vancouver and told them about the trouble, they tried to boot it, and it actually booted but after like 3 minutes the macbook crashed. For about 10 minutes two guys tried to boot it and so on, but they didn't get it to boot. So they took it in for service and somebody was going to check out the macbook and see if it would need a replacement logic board - which it did. So on Monday they ordered the logic board, and today Monday 22nd of January I got it back. Now the thing that bothers me is that when I now try to update the SMC firmware (my current version is btw 1.13f3) it still just says that This computer does not need this update. oh well - i went to apples support page to try to see if there would be a newer release of the smc and then I noticed that in the bottom of the SMC firmware 1.1 update page it says:
    Note: This update is only or the original MacBook, and will not install on a MacBook (Late 2006).
    Then I really was like W T F?!
    I would assume that people who work for apple would know that the SMC update will not update on a computer from late 2006, but nobody ever mentioned this to me.
    I've now had the computer for about an hour and the CPU temperature is at about 50 degrees celcius, with firefox, msn and a terminal open... about 5% cpu load.
    What I'm really wondering is that is there anyone who has similar problems with a macbook late 2006? I guess I'll just have to see if it works and just like I told the guy at macstation, if it starts RSS:ing again I'll be banging on their door
    macbook 2,1 Mac OS X (10.4.8) rss, unable to install SMC firmware update
    macbook 2,1   Mac OS X (10.4.8)   rss

    See if reviewing the installation instructions provides any help:
    http://www.apple.com/support/downloads/macbookefifirmwareupdate10.html

  • Unable to install Premiere Pro update 7.1

    I've been unable to install Premiere Pro update 7.1 on a Mac running Mavericks.  I've made three attempts over as many days.
    For what it may reveal, here is the install log.  Any ideas?
    [Please don't post full longs to the user forum.]

    Try using the "adobe cleaner tool" (you'll find it online) to uninstall Premiere Pro. Reboot. Install Premiere Pro with the creative cloud panel from the apps list. It should work fine

  • Why am I unable to install some apps updates from the app store?

    Why am I unable to install some apps updates from the app store? Does anybody know why? I need help!!!

    1.   Are you using the right signing in details?
    2.   Were the Apps originally bought via the App Store?
    3.   Have you checked if they are partially downloaded?
    There is a support link here ...   Apple - Support - Mac App Store - Contact Support

  • I am unable to install the latest update to iTunes, I get constant error messages, even when I attempt to uninstall iTunes completely and start afresh, iTunes is still listed in my program files on my hard drive and the shortcut is still on my desktop!?

    Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing

    Hey there Mambo822,
    It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
      iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Unable to install Adobe Air Update

    I am unable to install an Adobe Air update.  I am running Windows7, getting error code 80040154.  Could it be Kapersky anti virus software blocking?

    Thank you for your help.  I have suspended Kapersky but I cannot find Air when I search in the Programs and when I try to install I now get a message saying 'it may be your administrator blocking you'.  I am the only user and set up as the Administrator but do not know how to check if this is the case.
    I have managed to install the application that needs Air on an old XP notebook.  Much Appreciation for your help. RJ

  • Unable to install Phone Tools Update Pack

    Hi,
    I own Lumia 930 with Denim and I tried to install Phone Tools Update Pack so I would be able to monitor my device but unfortunately I cannot. When I am trying to install I am receiving error 0x80070057 - Unable to scan for packages from the update server. In
    another topic there were hint to check date and time, I checked mine it's ok, on default I have set for automatically but I even tried with manual settings - no solution. I am using Visual Studio 2013 with SP 4 Community Edition. I tried do this on both my
    PC and Laptop (windows 8.1 x64). I can without problem deploy application on device. I would be very grateful for any help.

    Hi DeadStarlin,
    Are both the computer and the phone connected to the Internet? On your computer, make sure that your web browser does not have
    Work offline enabled. Also, you cannot connect through a proxy server that redirects to a login page; for example, in a hotel or an airport.
    Is the phone turned on and the screen unlocked?
    Is your Microsoft account information correct and valid?
    If the above information still can not help, please try to restart your phone and computer to see if it works.
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unable to install the latest update, can't get past 'connecting to server'. Have let it run as long as 10 mins. but still says 'connecting to server'; any ideas?

    Unable to install latest update.
    Can't get past 'connecting to server'
    Have let it run for at least 10 mins. but still shows 'connecting to server
    Any ideas?
    Thanks
    John

    Please do the following.<br><br>
    #Use Internet Explorer to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1]<br><br>
    #When you see the prompt, choose "'''Save'''" and save it to your desktop.<br><br>
    #Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
    #Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
    #Finally run the installation file you downloaded to the desktop earlier.<br>
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.<br><br>
    After you complete the installation, go to the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update those where necessary.

  • Unable to install Lion Recovery Update v1.0 on Mac OS 10.8.2

    Hi to anyone who can help,
    As the "Find My Mac" option is greyed out, I followed all the instructions on the support forums on how to get this feature, such as Verify/Repair Machintosh HD using Disk Ultilty from the Recovery partition.
    Subsequently I tried to install Lion Recovery Update v1.0 from the Apple Support link below:
    http://support.apple.com/kb/DL1464
    However, while attempting to install, it says "This update can only be installed on OS 10.7". How do I get this fixed?
    Some background info, my MacBook Pro 15" (early 2011) had a replacement Hard Disk Drive and Logic Board.
    1. The replacement drive had 10.7.4 installed, and I used the recovery partition to restore to a Time Machine Backup (which was 10.8.2).
    2. Do I need to "download" the Mountain Lion package in the app store again? I see it as an available to download instead of saying "Installed".

    Exit Code 6 is a generic error that indicates that the installation was not successful.
    Have a look at the following document: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    A quick look at the error log, indicates a permission issues. Are you logged in with an Administrator account and have sufficient privileges to install software?

  • I am unable to install the newest update for itunes and quicktime because of a bonjour error about path not being located

    I have windows 7 and I have been trying to install the newest update for itunes and quicktime but I keep receiving the same Bonjour error. I even tried to do it manually and no luck. I also tried to unistall bonjour but it would not even allow me to unistall it either. No matter what I do I get the same error listed below:
    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    I would greatly appreciate any help because this appears whether i am trying to install the updates or remove bonjour to reinstall. I am stuck.
    Thank You in advance!!!

    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • (still) Unable to install Flash Player update (process hang)

    I haven't been able to install updates for Flash Player for over a year now. Ever since the website changed to the web-install package, i've been unable to update from the download page (http://get.adobe.com/flashplayer/). The file is downloaded successfully, i double click it, the security message pops up asking if i'm sure i'd like to run it (not UAC as i have that disabled -- i mean the somewhat uncommon Windows one when opening .exe files from the internet)...and then it hangs. Install_flashplayer shows up in the process list of task manager, and the file is moved to a temp location and subsequently deleted. That's it. I don't get the installation menu, nothing.
    For some reason the only way i'm able to update is if i get the pop-up upon logging into my computer, telling me a new version is out, in which case it updates as expected. The problem is it sometimes takes MONTHS for this pop-up to finally appear, which means i'm left browsing the web with outdated (sometimes vulnerable) Flash components for the entire duration. On top of this, sometimes the pop-up won't simply update, but instead links me to the aforementioned site which does not work.
    Any help? I've tried almost everything, including uninstalling my old version in preparation for a clean install of Flash. Nothing works. About a year ago i was able to use the offline archive instead, which worked a treat, but i can't access it anymore.
    EDIT: should have included specs. I'm using Windows Vista 32bit, and i always make sure to keep everything updated. UAC is disabled, and running the installer in Admin mode has no effect. I'm using Firefox, and have ESET as my anti-virus.

    http://get.adobe.com/flashplayer/  gets you the "Stub" installer.
    You need the following:
    Flash Player Uninstaller
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Right click each and "Save target as".
    Save them to your Downloads folder - DO NOT RUN them yet.
    Reboot your PC.
    BEFORE anything else, run the Uninstaller.
    Then run the ActiveX installer, and the (other browser) installer.
    Note: there are all FULL "offline" installers and uninstallers. They don't need to download anything else during the install process.

  • Unable to install Creative Cloud Updates

    Adobe Illustrator CS6 Update (version 16.2.0)
    There was an error installing this update. Please quit and try again later. Error Code: U44M1P34
    DW CS6 12.1.1 Creative Cloud update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1P34
    Photoshop Camera Raw 7.3
    There was an error installing this update. Please quit and try again later. Error Code: U44M1P34
    That enough information? After chasing around the Adobe Help system for an hour and a half today and not being able to contact anyone at all yesterday when this forst started occuring, I'm kinda getting annoyed
    Then getting on here and finding that my screen name (my own name, registered with Adobe and on the forums) isn't available, one could be excused for an excess of peevishness, I hope.

    I finally found a solution that worked!
    I had to find the adobe logs to understand what happened, and found this error "information not found in Media_db".
    Here's the location of the solution: Re: Getting fatal Exit Code 34 when installing an app
    And here's the answer copied and pasted from the page. I have windows 8 64 bit, but this solution worked for me. The downside was that it said many of my applications weren't installed in the CC app, so I had to hit reinstall on many of them, but everything installed and updated correctly after this.
    I had the very same problem, and I am using windows 7 too. After chat with the adobe tech support. He showed me how to fix the problem.
    Also, I tried the clean tool already. That didn't help.
    Go to C:\Program Files (x86)\Common Files\Adobe   if you use 32bit system I think it would be C:\Program Files\Common Files\Adobe
    Change 3 folder name.
    Adobe PCD -> Adobe PCDold
    backup -> backupold
    caps -> capsold
    Then run the setup file again.
    This method worked for me. Hope that would work for you also and save you some time.

  • Unable to Install JRUN 4 Updater 7 on windows server 2008 64 bit machine

    Please help us on the error while installing jrun4, updater 7 on Microsoft Windows Server 2008 R2 Enterprise 64 bit operating system
    The JVM installed on the machine is 32 bit.
    I installed jrun on the machine successfully. When I try to add a web server using the web server configuration tool.
    I get the below fatal windows error.
    Windows package manager
    Operation failed with 0x8007000B
    An attempt was made to load a program with an incorrect format.
    Please help....

    Hi Charlie,
    64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
    I hope this was helpful.

  • Unable to install Extension Manager update 6.0.8

    Update fails with error U44M1P7

    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    -has links for error codes A12E.. @Install and U44M.. errors @Update

Maybe you are looking for

  • E71: how to remap keyboard keys

    Hi! I was wondering whether there is a way to remap the keys on the qwerty keyboard on E71. I basically want a different layout. Is there any system utility I could use, buy, etc.? The reason I want this is because a standard native Russian keyboard

  • Developing a data mining tool

    Can anyone help me find any relevant source code to develop a data mining tool with cluster analysis capabilities. I have found bits of source code here and there in C/C++ but haven't found any in Java. I really need to see the source code for a full

  • EA4 and Tomcat

    Ok, after downloading over 50 MB of JWSDP 1.2 just to get the 6 MB of JSF, I install it and it won't start. Ok, I couldn't care less about JWSDP. So I take jsf-guessNumber.war and drop it into my Tomcat's webapps directory. First error I get: org.xml

  • Listeners not working on refreshing View

    Hi all I have an application( Virtual WareHouse Monitor) which reads data froma text file and accordingly it generates a 3D view of the warehoue. Actually when i reopen other new text file on my application , although the 3D view is displayed properl

  • 2 alv in one screen

    Hello experts. I want to know , how i can display 2 alv in one screen in this way : when i push double click on the row ( in first alv ) i give the detail of this row in the new alv ( second alv ) under the first alv . Thanks for the help, AVI.