Unable to install any 3rd party applications

I have a nokia e61. I have been trying to install 3rd party apps like newsgator, truphone, google maps etc on my phone. It dowloads the applications and immediately thereafter gives me a message 'Unable to install'. Any suggestions anyone.

Hi,
Yes, i've tried that step with a 6630, N95 and E61 !
Works like a charm!
Cheers
Let me be a ripple in the silent stream of your memory ~ Viveca

Similar Messages

Unable to use any 3rd party DNS servers

Hi
I've recently signed up to BT Infinity. I've noticed that I'm unable to configure any of my devices with a 3rd party DNS server (e.g. Google DNS, Open DNS etc...) as I get blocked by BT's parental controls:
See here, I'm using Googles DNS servers (8.8.8.8 and 8.8.4.4):
When I try to access any URL's I get the following error:
Note that I have turned off Parental Controls:
This is something that is happening on all my devices (tablet, PS4 and PC). I'm fairly certain this worked a few weeks ago.
Can anyone help?
Solved!
Go to Solution.

You will need to delete the Parental Controls, then wait a couple of hours.
BT Parental Controls do not allow themselves to be bypassed by people using other DNS servers.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Any 3rd Party Application(s) to export to tape?

Heya guys. Hope production has been treating you all well. I'm kind of in a jam here where for some reason both my sony dv decks have stopped working via firewire. I currently need a third party application(if one exists) that can export a ProRes file to DV Tape. I'm about to go through the pain of reinstalling FCS 7, but I've asked a friend to come by with his cam for me to export a program to tape. I reinstalled my OS as a last ditch effort to see if that was the problem, sadly, it wasn't. So I can only conclude that my decks are... swabed.

That's strange then Nick. Almost all my timelines are in a different codec setting. I just figured FCP just plays em back through DV signal which is why all these years I've been able to export my ProRes timeline to mini DV tapes. Premier Pro did it as well...H.264 is another story. Been trying to switch over to FCPX lately so I don't wanna have to reinstall FCP 7 if I don't have to... or Premier for that matter. I don't mind converting the clips to DV but the question still remains, do you guys have any apps to export to tape?

What is the best way or method (s) to clean up my MacBook Pro? Do you recommend any 3rd party applications such as "Cocktail" to do it for me?

I am looking at clearing cache, speeding things, clearing out junk etc

Please don't use any third party app to cleanup a Mac.
OS X takes care of that itself.
For more on this: http://www.thesafemac.com/mpg/
Best.

After Lion upgrade, unable to start any 3rd-party apps. Suspect it has something to do with the cache and permissions.

Dear Apple Support Community,
I am using a MacBook 15" (mid-2010) with Intel i7 2.66GHz.
Currently, I write to you via my sister's laptop as mine is unable to start-up Safari or any other web browser at the moment.
After a relatively smooth OS installation of OS X Lion, I noticed that my usual apps, Evernote, Twitter, Skype, and others, were not able to start-up at all (i.e. kept bouncing in place on the dock for what seemed like forever). I have since disabled their 'Open at Login' command and now start my MacBook up with no apps running. After restarting my computer countless times, I've realised that only selected native applications are able to open. Finder, Safari, App Store, iTunes, FaceTIme and most of the Utilities. Even on Finder, right-clicking is apparent blasphemy as the window freezes and the windmill pops up, and I am forced to relaunch Finder. Safari is only able to load simple web pages such as Google.
I have attached an excerpt of my Console for you guys (I could take a screenshot but dropbox could not even open to allow me to send it to my sister's laptop). As you can see, at every refresh, the same 5 messages appear, that a particular 'com.apple.launchd.peruser.501' keeps crashing. Correct me if I'm mistaken but this is probably the process handle for Launchpad. Although I am not sure whether this is the only reason for my computer's sluggishness post-Lion update, I would really like to eliminate this possibility.
Things I have tried:
Repairing Disk Permissions
Unfortunately, this yielded no positive results as it did not seem to rectify the problem. Subsequent reparations have produced the same log, hence I don't think it's working.
Waiting for Indexing to complete
Some people have cited that the reason behind the sluggishness could be due to the fact that Spotlight was indexing my hard drive for optimal search results. I have since waited 7 hours for the indexing to complete, but am still stuck with a computer that cannot even open Twitter.
Installing Onyx
Other forum users have said that it is possible that the computer's cache has been clogged up or something. I am not entirely sure what this means but I went to attempt to download the free product that most people have recommended. Although installation was a cinch, I was not able to even start Onyx. After 10 minutes, Lion just told me that the program had been unresponsive for too long and asked me whether I wished to kill it.
I am almost certain that the overarching problem could be erroneous sharing permissions. But then again, that is no reason for my computer to behave in such a snail-like manner. I would really appreciate if you guys could provide me with some sudo commands to use in the terminal or something that can fix the problems my computer is facing, after understanding the limitations that I currently face considering the state of my MacBook.
The fact that I am writing here on this forum is that I wish to do anything other than a full reinstallation of the OS that has caused me so much anxiety (Snow Leopard was just magical compared to this pile of sh*t, pardon my language). I just want to do everything I can before having to resort to such a barbaric act (I have a lot of applications but I don't know whether I am able to restore those using Time Machine as well).
In any case, thank you guys so much for reading all the way to the end. Help of any sort, be it sincere or condescending, will be fully appreciated. Please don't hesitate to ask for more information if I have not already provided it. As I am an average user, I may not be too familiar with jargon. So if getting the information requires complicated procedures, please provide a step-by-step.
Also, tl;dr: Updated from Snow Leopard to Lion, computer became slow and buggy, tried many things, didn't work, need help.
Thanks,
Nathan

Thanks for the quick advice!
Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
Here's the error log after the restart:
What else should I try?

Are there any 3rd Party Cloud Application Readiness Assessment tools in the market today?

I have couple of interrelated questions here:
1
Are there any 3rd party tools, which do Cloud Readiness Assessments for on-premises Applications. I am looking for names of any such tools, if they exist, which thoroughly analyse on-premises applications, and generate detailed reports on whether the
application is ready for moving to the cloud (and why?), or if it needs some changes before moving (which changes?), or if the application needs major changes (which?) or cannot be move to cloud in its present form. The cloud here could be Azure (1st pref)
or AWS (2nd pref).
2
From the tools named in response to above questions, which are the ones which can be used for doing applications assessments for a large number of on-premises apps in most efficient way? Do such tools actually exist? Imagine scenario that an enterprise customer
comes to me and asks that they want to check the cloud readiness for 3000 applications in shortest possible time - What tool will you recommend for such massive assessments?
Thanks, LH

Hi,
I would suggest you to check this Microsoft Cloud Self Assessment Tool.
For more information on this, refer this link:
http://blogs.technet.com/b/schadinio/archive/2012/07/09/microsoft-cloud-self-assessment-tool.aspx
Regards,
Azam Khan

I have a PVR which supports DLNA connected to my home network. I want to access files on my MacBook from the PVR. I understand that my MacBook doesn't support DLNA. Is there any 3rd party software that I can install on my MacBook to provide DLNA?

Hi,
Can anyone help me please.
I have a Personal Video Recorder (Humax HDR-1010S), which supports DLNA, connected to my home network via Wi-Fi.
I want to play music from iTunes and view photos from iPhoto from my MacBook (which is also connected to the home network) via the PVR / TV / Home Cinema sound system. I understand that my MacBook (running OS X Mavericks) doesn't support DLNA server.
Is there any 3rd party software that I can install on my MacBook to provide DLNA server?
Thanks,

My recollection is that the iPhoto library has some fairly robust protections to prevent inadvertent or even deliberate changes being made that might have unwanted consequences. I'll take alook at my setup and let you know if I can see anything that might help you. Even if you get Serviio to "see" the iPhoto library, it almost ceratinly won't show the album structure and names. What I did is to export each iPhoto album to a standard folder with the appropriate folder name. These I keep on an external backup disc and Serviio can see these without trouble.

Any links i open from 3rd party applications do not open in firefox.

To be more precise, when i click a link, Firefox does open however it does not visit the URL. It simply opens a new session. I have started Firefox in safe mode and the problem occurs, i have reset firefox to default preferences and the problem still persists. I can see no problems in the setting of Firefox itself and have already tried all the fixes available.
I am using Firefox 29.0.1 on Fedora 20 64x

As i stated, when i click links from 3rd party applications, such as skype; a youtube link or something similar. Firefox opens a new session however it does not visit the clicked url

IPod Touch 2.0 Crashes 3rd Party Applications, Erases Music and Videos.

I don't know if this has been happening to some people. I hear it's mainly for FW 2.0.1, but I have 2.0 and I'm afraid to upgrade. Listen to this:
It's been over a little over a month since I upgraded my iPod to 2.0. I'm browsing through my apps from the AppStore. All of a sudden I open an application my iPod reboots, crashes. Not only that, but I had to wait at least 4min for the iPod to reboot. It *****.
After it finally reboot, I opened up a 3rd party application, it opens the main screen, and crashes, bringing me back to the SpringBoard.
This happens to all of my 3rd Party Apps.
BUT THAT'S NOT ALL: MY MUSIC AND VIDEOS HAVE BEEN ERASED.
When I plug the iPod into iTunes on my Mac, it thinks the iPod still has music and videos on it. It ***** having to restore every single day.
Please help me, anybody. I know this has been an issue for those with 2.0.1. Here are my questions:
-Should I be afraid to upgrade to 2.0.1?
-How can I stop the crashing of 3rd Party Apps, as well as the erase of music and videos?
-Can I do this, so I don't have to restore?
Any help would be appreciated,
Thank you in advance,
Xander2008

This is happening to a lot of people. Check out the discussions all the way back even prior to August.
No one seems to know the cause but there are many solutions offered to try. You will have to restore or do a full recovery depending on your situation. Again...lots of advice on how to do both in prior discussions.
Do not restore from a back up. Rather, set your ipod up as a new ipod and give it a new name. Begin by loading your music and videos etc. from your stored library on your pc. You'll find your itouch works like new.
Next before loading in any applications, review the app store pages selling each app and determine which ones have bugs and crashing issues they are working on or have corrected in their app updates. I've narrowed it down to possibly Advent, Aurora Feint or Converter in my case. We have over 90 free and purchased apps in our library but we have kept it to a bare minimum or 25-30 apps.
I've also read somewhere in these discussions that the larger mb apps could be at issue with the 2.0 and 2.0.1 updates and something to do with firmware updates? Sorry but I'm not real saavy with the technical side of it but i can tell you that between our two ipod touches we restored/recovered over 16 times from 8/04 to 8/10 because of crashes.
So far we've been lucky and have been up an running bug free for 3 days. Also, one app started acting strange after i tested it upon syncing so i connected back up to the pc and removed it...that's when i checked online and saw it too had crash issues they were working on.
They say you can have as many apps as you want on your itouch, so far i'm not testing that theory again...we're taking it slow and choose only what we really really want on our ipod...some say stay away from the gimmicky apps but we have a few on ours that are still working well, crazy lighter, iguide, itarot, campfire, magic8ball...so trust yourself and those that have provided info as well in previous discussions.
try to find the post from dbmandrake re workarounds for 2.0.1 app install crashes dated 8/9/08...it made sense and got me rolling again.

Qosmio F10-136 - Unable to install any drivers

I have a Qosmio F10-136.
I have recently formatted the hard drive. Since I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available online from the Toshiba website but I have been unable to install any drivers except the wireless LAN. Most driver setups refuse to run at all, some seem to install the files, but the driver is not detected.
Please advise.

> 1. Sound device not working still - When I install the audio effect driver (i.e. toshiba virtual sound), there does not seem to be any effect even though it is installed. Then, when I install the SoundMax Audio System, it gives me an that the driver does not exist.
What do you mean exactly by does not seem to be any effect. Can you hear the sound coming from the speakers? Are there any yellow exclamation marks related to the sound card? If not then the sound card driver has been installed properly and the sound should work!
> 2. I cannot figure how to install the LAN driver.
Where is the problem? Download the LAN driver, unzip the package, access the device manager, choose the unknown device (LAN card), point to the driver files downloaded from the Toshiba driver page and finish the installation.
The LAN card should be recognized properly.
> 3. Same with the TV tuner drivers; there is not setup file.
As mentioned above; you can install the drivers in device manager. Choose TV tuner in device manager (possibly marked as unknown device too.) point to the TV tuner driver files and finish the installation.
> 4. During the windows setup, I had created 3 drives, but I cannot access the drives D & E. When I try to access them, windows asks me to format them, but it gives me an error when I try to do so. Also, the hard drive is not shown in the disk management (not even C drive), so I cannot do anything. Although, the hard drive is shown in the device manager.
If other partitions have been created on the HDD then this should be visible in disk management. I dont believe that you cannot see even the C partition. In my opinion you didnt check this correctly.
Access the disk management (MY Computer, right click, manage). Choose Disk Management. There you should see the HDD and CD/DVD drive.
If the partitions have been created but not formatted then you would see just a free space.
Click right on this space and you could either format this or could delete the partition.
PS: I recommend using a 3rd party tool like Partitions Magic in order to create the partitions on the HDD (Win XP)!!!

PCLinusOS + WINE but 3rd party applications freeze, help.

Loaded PCLinuxOS 4 times now with WINE in 3 different configs, 3rd party apps always freeze.
They do install but on loading they freeze, always. I've tried 6 different apps. & all freeze.
Admin is logged on & working.
2 HDD's, (HDD-1) NTFS and (HDD-2) Linux boot & swap
Any ideas?
LOL, I'm reading the receint LinuxOS is irritating MicroSoft. HOO-AHH!!!
I do hope Lunux will make more Apps to COMPLETLY replace Windows.
So far Linux is a bear to work with but I'm new to Linux, so go figure, BUT TRYING.
Thanks
fvm @ usa.com

Hi,
I have the same problem since yesterday and now after I have done something follow the instruction from this topic, it is working now!!!
Okay, Here is what I have done;
First:
I hard reset my Iphone; Steps stated as below,
1.) Press the home button (the big circle below the screen) and the sleep wake button (the button on top of the iPhone) simultaneously.
2.) Hold both buttons simultaneously for a few seconds, Ignore the "Slide to power off" and keep holding
3.) The iPhone should now shutdown automatically - (fade to black)
4.) Turn the iPhone back on by hitting the sleep/wake button.
5.) You should now see the Apple logo, your iPhone is restarting and thus booting up.
6.) You have completed a hard reset successfully.
Second:
I randomly updated one of my application (Hangman - It is a puzzle for word gussing)
The when I finish updating, I go randomly check one of my 3rd party applications, and it is working, and then I tried with others, all working as per normal.
Hope this would help.
P.S. It is indeed very frustrating to facing such an un-pleasant problem, hope apple side can come out with proper solutions in their next updates.

Opening and closing 3rd party applications ??

Does opening and closing 3rd party applications with the click of the home button actually close the application, or, does it continue running in the back ground ?
I noticed most of the 3rd party application don't have a close/exit option, and wonder if opening and closing several applications with the home button can cause the many crashes I have read from fellow iPhone owners ?

Clicking the Home button may close the application depending on the application itself. Some applications that use the network may close when going to the Home screen. To force quit any application, hold the Home button down for about 6 seconds until the Home screen comes up.

CERT_TRUST_IS_NOT_SIGNATURE_VALID when installing a 3rd-party cert in Windows 2008 Domain Controller

Hello,
I'm facing with a problem while trying to install a 3rd-party digital certificate on a Windows 2008 Domain Controller.
Basically, I'm following this TechNet
http://technet.microsoft.com/en-us/library/cc783835(v=ws.10).aspx
1) I did create the file Reqdccert.vbs on the Domain Controller
2) then I did generate the inf file
cscript reqdccert.vbs DomainController E
3) and then I generated a certificate request
certreq -new AD.inf AD.req
4) also I've imported RootCA and SubCA into the Certificate Store of the DC
5) I got a signed certificate from our 3rd-party CA running on Windows 2000
6) when importing the certificate I get the below error
C:\>certreq -ACCEPT ad.p7c
Certificate Request Processor: The signature of the certificate cannot be verifi
ed. 0x80096004 (-2146869244)
Here is the verbose log from CAPI2:
+ System
- Provider
[ Name] Microsoft-Windows-CAPI2
[ Guid] {5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}
EventID 11
Version 0
Level 2
Task 11
Opcode 2
Keywords 0x4000000000000003
- TimeCreated
[ SystemTime] 2014-06-13T09:33:02.604870500Z
EventRecordID 304
Correlation
- Execution
[ ProcessID] 1700
[ ThreadID] 3032
Channel Microsoft-Windows-CAPI2/Operational
Computer ad.eac.igs
- Security
[ UserID] S-1-5-21-4171312682-976198474-2692596432-500
- UserData
- CertGetCertificateChain
- Certificate
[ fileRef] 4DA02894B4AFB76F8D6B8722A96A3444041573C6.cer
[ subjectName] ad.eac.com
- AdditionalStore
- Certificate
[ fileRef] 691847ADD248AEB8579462249B063A1555716B21.cer
[ subjectName] SubCA
- Certificate
[ fileRef] 4DA02894B4AFB76F8D6B8722A96A3444041573C6.cer
[ subjectName] ad.eac.com
- Certificate
[ fileRef] 0175DDA12776ED8CA4657E921E9AE3C6B0698F71.cer
[ subjectName] RootCA
ExtendedKeyUsage
- Flags
[ value] 0
- ChainEngineInfo
[ context] user
- AdditionalInfo
- NetworkConnectivityStatus
[ value] 1
[ _SENSAPI_NETWORK_ALIVE_LAN] true
- CertificateChain
[ chainRef] {0B005F9F-F15B-4FE2-A630-7BBEE6AB5C0A}
- TrustStatus
- ErrorStatus
[ value] 8
[ CERT_TRUST_IS_NOT_SIGNATURE_VALID] true
- InfoStatus
[ value] 0
- ChainElement
- Certificate
[ fileRef] 4DA02894B4AFB76F8D6B8722A96A3444041573C6.cer
[ subjectName] ad.eac.com
- SignatureAlgorithm
[ oid] 1.2.840.113549.1.1.11
[ hashName] SHA256
[ publicKeyName] RSA
- PublicKeyAlgorithm
[ oid] 1.2.840.113549.1.1.1
[ publicKeyName] RSA
[ publicKeyLength] 2048
- TrustStatus
- ErrorStatus
[ value] 8
[ CERT_TRUST_IS_NOT_SIGNATURE_VALID] true
- InfoStatus
[ value] 4
[ CERT_TRUST_HAS_NAME_MATCH_ISSUER] true
- ApplicationUsage
- Usage
[ oid] 1.3.6.1.5.5.7.3.1
[ name] Server Authentication
- Usage
[ oid] 1.3.6.1.5.5.7.3.2
[ name] Client Authentication
- Usage
[ oid] 1.3.6.1.4.1.311.20.2.2
[ name] Smart Card Logon
IssuanceUsage
- ChainElement
- Certificate
[ fileRef] 691847ADD248AEB8579462249B063A1555716B21.cer
[ subjectName] SubCA
- SignatureAlgorithm
[ oid] 1.2.840.113549.1.1.5
[ hashName] SHA1
[ publicKeyName] RSA
- PublicKeyAlgorithm
[ oid] 1.2.840.113549.1.1.1
[ publicKeyName] RSA
[ publicKeyLength] 2048
- TrustStatus
- ErrorStatus
[ value] 0
- InfoStatus
[ value] 101
[ CERT_TRUST_HAS_EXACT_MATCH_ISSUER] true
[ CERT_TRUST_HAS_PREFERRED_ISSUER] true
- ApplicationUsage
[ any] true
IssuanceUsage
- ChainElement
- Certificate
[ fileRef] 0175DDA12776ED8CA4657E921E9AE3C6B0698F71.cer
[ subjectName] RootCA
- SignatureAlgorithm
[ oid] 1.2.840.113549.1.1.5
[ hashName] SHA1
[ publicKeyName] RSA
- PublicKeyAlgorithm
[ oid] 1.2.840.113549.1.1.1
[ publicKeyName] RSA
[ publicKeyLength] 2048
- TrustStatus
- ErrorStatus
[ value] 0
- InfoStatus
[ value] 10C
[ CERT_TRUST_HAS_NAME_MATCH_ISSUER] true
[ CERT_TRUST_IS_SELF_SIGNED] true
[ CERT_TRUST_HAS_PREFERRED_ISSUER] true
- ApplicationUsage
[ any] true
- IssuanceUsage
[ any] true
- EventAuxInfo
[ ProcessName] certreq.exe
[ startTime] 2014-06-13T09:32:53.369Z
[ endTime] 2014-06-13T09:33:02.604Z
[ duration] PT9.232850S
- CorrelationAuxInfo
[ TaskId] {A8DC7725-FEE9-4E09-905A-FEFF7FAE9B8B}
[ SeqNumber] 27
- Result The signature of the certificate cannot be verified.
[ value] 80096004
Any idea what the problem is?
Thanks in advance,
Davide.

One common reason for that error is that the wrong SubCA certificate had been imported accidentally - e.g. an earlier 'version' of that SubCA with the same Subject CA name but a different key. In this case the validating client will try to build a chain
based on name only but finally the signature check fails.
Could you cross-check if the extension Authority Key Identifier in your DC certificate is the same as the field
Subject Key Identifier of the SubCA certificate? (These are typically hashes of the keys though it is not standardized - it should be a unique string characteristic for the CA)
For the client cert. CERT_TRUST_HAS_NAME_MATCH_ISSUER is indicated in your log - thus Isser name in client cert. matches Subject Name in CA cert, but we don't know about SKI/AKI.
Elke

Are there any 3rd party tools which provide Microsoft Azure IaaS diagnostics?

Are there any 3rd party tools currently, which can be used for giving detailed diagnostics Information about the IaaS environment (like on VM's, Virtual Network etc.) in a detailed report format periodically? Please note that I am looking for any such tools
around IaaS environment diagnostics here, and not about Application diagnostics.

Hi Bahree,
Microsoft does not suggest a specific third-party product. However, we do use them, and see lots of other customers use them.
Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch , You may browse to these site and few others to learn more, and chat with their folks directly on how they support Windows Azure.
I see that Microsoft has published a self-help diagnostic package for running Windows-based virtual machines (VMs) in Azure IaaS and this this diagnostic package does not require opening a Support Request with
Microsoft
This package helps to diagnose and resolve common issues on running Windows-based VMs in Azure IaaS
We may download the diagnostic package from Microsoft's Support Diagnostics Self-Help Portal:
https://home.diagnostics.support.microsoft.com/SelfHelp?knowledgebaseArticleFilter=2976864
You might want to see
Microsoft Azure Virtual Machine Monitoring with Azure Diagnostics Extension
Regards,
Shirisha Paderu

RFC( SAP R/3) to XI to 3rd party Application

Hi All,
we have an 3rd party application to which we want to send some data from R/3. We are using XI as the middleware.The process has to be triggered from R/3 side. We are not using Idoc's here. We are planing to use the RFC through which the data transfer has to be done.
We are creating a BAPI with import, export and tables parameters.Basically the RFC is in SAP R/3 System.We need to send the data in the table to XI.
In this case how the RFC destination has to be created and how the RFC to be called in the R/3 system to export the Data to XI system.
Answers are highly appreciated.
Thanx and Regards,
Durga.

Hi,
<i>>>>In this case how the RFC destination has to be created</i>
Check this blog by Michal it shows you step by step
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
<i>>>>how the RFC to be called in the R/3 system to export the Data to XI system.</i>
Hope you are aware of normal way of calling function
CALL Function "FM Name"
Export
Tables
in this case the RFC should be called as follows
CALL Function "FM Name" destination <SM59 Destination>
Export
Tables
The above is for Sync call and if you want to make a Async call that is you are not expecting any reponse from the target then
CALL Function "FM Name" IN BACKGROUND TASK destination <SM59 Destination>
Export
Tables
Thanks,
Prakash

Unable to install any 3rd party applications

Similar Messages

Maybe you are looking for