Unable to install any Windows on X200s

Bought the notebook w/o op. system. After several attempts of installing a retail version of Win7 Ultimate continued with trying another versions (W7 and W8.1, both 32 and 64 bits) from different sources... Tried from optical drive (of DockingStation) and from own USB port/pendrive ISO. The same drive error:
- in case of CD-install, after copying the boot packet to the internal HD (Fujitsu 160 GB), on the grafical installation screen appears the optical drive error, stopping the file copy process and claiming driver installation. NO DRIVERS ARE ACCEPTED;
- in case of USB-install lets create the boot partition on HD as well, but the page of choosing of partition/formatting is inactive - the only active choice is the need of driver installation, in this case with "No HD drive found" error(!); a bit stupid after creating a boot partition on it. Trying manually all drivers (either marked as compatible with the chipset or not) from the installed boot sector (Windows/System32/Driver store) or externally downloaded drivers (quite a lot, a 3-day-sammling), NO ONE ACCEPTED:
The HDD firmware was upgraded (Lenovo site), the BIOS upgraded (Lenovo) and used with default settings. Befre and after the same result. PC-Doctor DOS, hardly found for my hardware, runs all tests with PASSED...
What to do? Only thing not proved yet: completely erasing/cleaning the HDD before install attempt (were enough a total formatting with PC-Doctor or done with a partitioning program? - if necessary). A question: can pass through all testings a faulty driver chipset? I doubt it.
Could somebody help me, please?

@rvdelhi
Although you would need to backup essential data first, it may be worth resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself).
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Lenovo G550 unable to install any Windows Live programs

So I just recieved my G550 for the holidays, and the first thing I tried loading onto it was Windows Live mail and messenger. However, the install fails. I have tried several times with different downloads of it, but it does not work.
Can someone help me figure out why? Or am I just going to have to use trillain and Firebird?

HI i have the same problem please some help, I try whit ubuntu to format hdd but stil stuck at install of win 7 8 xp .can i go with warrantyor ? Thanks

Qosmio F10-136 - Unable to install any drivers

I have a Qosmio F10-136.
I have recently formatted the hard drive. Since I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available online from the Toshiba website but I have been unable to install any drivers except the wireless LAN. Most driver setups refuse to run at all, some seem to install the files, but the driver is not detected.
Please advise.

> 1. Sound device not working still - When I install the audio effect driver (i.e. toshiba virtual sound), there does not seem to be any effect even though it is installed. Then, when I install the SoundMax Audio System, it gives me an that the driver does not exist.
What do you mean exactly by does not seem to be any effect. Can you hear the sound coming from the speakers? Are there any yellow exclamation marks related to the sound card? If not then the sound card driver has been installed properly and the sound should work!
> 2. I cannot figure how to install the LAN driver.
Where is the problem? Download the LAN driver, unzip the package, access the device manager, choose the unknown device (LAN card), point to the driver files downloaded from the Toshiba driver page and finish the installation.
The LAN card should be recognized properly.
> 3. Same with the TV tuner drivers; there is not setup file.
As mentioned above; you can install the drivers in device manager. Choose TV tuner in device manager (possibly marked as unknown device too.) point to the TV tuner driver files and finish the installation.
> 4. During the windows setup, I had created 3 drives, but I cannot access the drives D & E. When I try to access them, windows asks me to format them, but it gives me an error when I try to do so. Also, the hard drive is not shown in the disk management (not even C drive), so I cannot do anything. Although, the hard drive is shown in the device manager.
If other partitions have been created on the HDD then this should be visible in disk management. I dont believe that you cannot see even the C partition. In my opinion you didnt check this correctly.
Access the disk management (MY Computer, right click, manage). Choose Disk Management. There you should see the HDD and CD/DVD drive.
If the partitions have been created but not formatted then you would see just a free space.
Click right on this space and you could either format this or could delete the partition.
PS: I recommend using a 3rd party tool like Partitions Magic in order to create the partitions on the HDD (Win XP)!!!

HT3986 how to install any windows on macbook pro (early 2011) (os x mavericks)?

En: how to install any windows on macbook pro (early 2011) (os x mavericks)?
Ro: *** se instaleaza orice windows pe macbook pro (early 2011) (os x mavericks)?
Help Me Please

search
how to install windows on a macbook pro
http://support.apple.com/kb/ht3986
http://www.youtube.com/watch?v=uVfRQ0YIDUI
http://www.gadgetreview.com/2013/05/how-to-install-windows-8-on-your-macbook-pro .html
http://www.redmondpie.com/how-to-install-windows-7-on-macbook-pro-with-retina-di splay-tutorial/

Can anyone help me? I recently bought a secondhand PowerBook G4 but there was no installation discs, where can I obtain a set as I am unable to install any software. Many thanks.

I recently bought a secondhand PowerBook G4 but there were no installation discs with it and at present I am unable to install any software, where is it possible to obtain a set of the discs so that I can reinstall the software to try and resolve this problem.
Many thanks.

You may also want to try eBay. Finding disks for a machine that old will be difficult though.
Best of luck.

Unable to install Update Windows 7 x64-based system KB2952664

Unable to install Update Windows 7 x64-based system KB2952664, Error code 80073701. Internet Explorer 11 for Windows 7(although IE 11 is already installed) fails to install also(at the same time)

Hi,
Please try to do download oracle database 11.2.0.3.0 64 bit
Oracle Database 11.2.0.3.0 is certified on Microsoft Windows x64 (64-bit) 7
Thanks,
Rajasekhar

After installing Trend Macro antivirus, I was unable to install any plugins. I get an "Unexpected Installation Error" message at the end of the installation. Closing the anti-virus does not help.

I have purchased Trend Micro Titanium Maximum Security and am now unable to install any plugins. I have had these plugins before and had no trouble with them but now they have disappeared. I tried closing the antivirus and added mozilla.org to the exceptions list but it did not help.
I have copied the text of the error.
Firefox could not install the file at
https://addons.mozilla.org/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=search
because: Unexpected installation error
Review the Error Console log for more details.
-203

http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203

Unable to install any software on Nokia E5-00

Hi, I have updated my E5 software from .042.010 to .042.014 on 06/06/2011, after the updation I am unable to install any kind of software on my cellphone. At the time of installation, it somehow stop responding and I have to restart the phone to continue my work. Please advise what to do. RV

@rvdelhi
Although you would need to backup essential data first, it may be worth resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself).
Happy to have helped forum with a Support Ratio = 42.5

Unable to install any version of iTunes

Hi there,
I am unable to install any version of iTunes as I get this error message "C:\program files\itunes\mozilla plugins\npitunes.dll verify you have access to that directory"
Can anyone help please?
I don't even have Mozilla Firefox installed!

Follow the steps outlined in the KB article: http://docs.info.apple.com/article.html?artnum=93976 and then try to reinstall iTunes.
Rachyl

Unable to install any upgrades

I am unable to install any updates on my MBA with OS X 10.7.2. They all result in "An unexpected error occured". I have tried with lots of different updates, firware update, Lion update etc with the same result.
Any ideas?

The code below is from trying to install update "Airport Utility" version 6.0 from The standard OS X Software Update function. The user (me) is prompted with "An unexpected error occured". I have tried with EFI Firmware, Max OS X Update combined 10.7.3, All packages. The result is allways the same.
Thanks, Jesper
Feb 21 08:57:57 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:57:58 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x103c08c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x103c08ae0=disk0s3=Recovery HD
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7fa05b116de0
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x7fa059605b60
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
              ProductBuildVersion = 11C74;
              ProductCopyright = "1983-2011 Apple Inc.";
              ProductName = "Mac OS X";
              ProductUserVisibleVersion = "10.7.2";
              ProductVersion = "10.7.2";
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: Firmware is up to date.
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: model = MacBookAir4,2
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:58:14: --- last message repeated 4 times ---
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:Samsung CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Printing drivers update available for Samsung_Common. (return value 2)
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:Samsung CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Printing drivers update available for Samsung_Common. (return value 2)
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[270]: Acquired Lock: 503, 259, 0
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[270]: Releasing Lock: 503, 259, 0
Feb 21 08:58:17 Jespers-MacBook-Air Software Update[259]: Calculated need 7324.112 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:58:51 Jespers-MacBook-Air Software Update[259]: Calculated need 1423.282 MB; 19234.636 MB free; 19252.345 MB available with MTM reclaim
Feb 21 08:59:03 Jespers-MacBook-Air Software Update[259]: Calculated need 1393.781 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:59:18 Jespers-MacBook-Air Software Update[259]: Calculated need 1423.282 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:59:20 Jespers-MacBook-Air Software Update[270]: Acquired Lock: 503, 259, 0
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: ----- Begin install -----
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: request=PKInstallRequest <1 packages, destination=/>
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: packages=(
              "PKLeopardPackage <file://localhost/Library/Updates/041-1440/AirPortUtility.pkg>"
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: Skipping component "com.apple.AirPortBaseStationAgent" (1.5.5-155.2.0-155002000000000-*) because the version 1.5.5-155.7.0-155007000000000-255 is already installed at /System/Library/CoreServices/AirPort Base Station Agent.app.
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: Extracting file://localhost/Library/Updates/041-1440/AirPortUtility.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Feb 21 08:59:52 Jespers-MacBook-Air installd[264]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Feb 21 08:59:55 Jespers-MacBook-Air installd[264]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Feb 21 08:59:55 Jespers-MacBook-Air installd[264]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.scmLrH/Scripts/com.apple.pkg.AirPortUtility.7SWC9 k
Feb 21 08:59:56 Jespers-MacBook-Air installd[264]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AirPortUtility.pkg”." UserInfo=0x7fc91c89f3a0 {NSFilePath=./preinstall, NSURL=file://localhost/Library/Updates/041-1440/AirPortUtility.pkg, PKInstallPackageIdentifier=com.apple.pkg.AirPortUtility, NSLocalizedDescription=An error occurred while running scripts from the package “AirPortUtility.pkg”.} {
              NSFilePath = "./preinstall";
              NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAirPortUtility.pkg\U201d.";
              NSURL = "file://localhost/Library/Updates/041-1440/AirPortUtility.pkg";
              PKInstallPackageIdentifier = "com.apple.pkg.AirPortUtility";
Feb 21 08:59:56 Jespers-MacBook-Air Software Update[270]: Releasing Lock: 503, 259, 0
Feb 21 08:59:56 Jespers-MacBook-Air Software Update[259]: Error: An error occurred while running scripts from the package “AirPortUtility.pkg”. (PKInstallErrorDomain code 112)

Unable to Install any packages in Fink

I am unable to install any packages either via Fink commander or via the terminal. I was able to install some just the other day, so I don't know what went wrong.
I have not been able to get Fink commander to see any package lists, despite following every bit of advice I could find in these forumns and on the net. Also, I updated the repositories rsync as instructed on the net. I can see the list of Fink packages by running "Fink List". However, when I try to install "sudo apt-get install xyz package" I connstantly receive the error "xyz package not found".
I'm sure this is a case of operator error, only I don't know what that error might be. I would be most grateful for anyone's help in this regard as I really enjoyed the Fink programs like kdegames that I was able to install before I started having this problem.
My thanks to everyone for any assistance they can provide.
Message was edited by: PugetSounder

I appreciate your previous response, instructing me to enter "source /sw/bin/init.sh as a user in order to run Evolution.
My problem is that this solution only lasts until I logout. When I log back and and try to run evolution via terminal, I receive the error "Command not found". Once I enter your instruction again, all is well-for that session.
Is there a way I can do this globally and make it "stick"? By making it stick I mean so that I don't have to do it each time I want to run evolution.
These issues of course don't happen when evolution is run as admin user. Also, it's worth noting that evolution is the only fink program that causes these problems. Other KDE programs like kgeography and kmahjongg don't have such issues.
I appreciate any feedback you can give with this issue.

Unable to install any apps..did reset, reboot, restore but nothing works

unable to install any apps..did reset, reboot, restore but nothing works

so you want to restore as new not from a back up and then try to download a application. the purpose for this is the fact that if you restore from a back you then your just putting the save soft ware back on your phone. and if soft ware is the issue then this step just got voided out. if that doesnt work or you did do that then it can be something hardware related and it can be replace through apple for free if your under the hardware warranty

I am unable to install ANY Adobe product on my Macintosh

I am unable to install ANY Adobe product on my Macintosh
iMac running 10.9
Tried to update Adobe Reader and was unable to.
Removed Reader and tried to reinstall, no luck.
Now my copy of Adobe Acrobat Pro will not run or reinstall.
I have spend over an hour with Adobe tech support only to be told that they will escalate it to someone else.

Just to let you know,
I applied this procedure today http://forums.adobe.com/message/5780749#5780749
and it solved all my issues, CCDesktop and PhotoshopCC correctly installed and up and running now.
Regards,
Roberto

I have paid up for a Teachers account and am unable to install any program. I keep getting directed to your 'Trial has expired'.

I have paid up for a Teachers account and am unable to install any program. I keep getting directed to your 'Trial has expired'.

Hi Pamela,
You can follow the article: Activation & deactivation help which might be helpful for your activation issue.
Please let us know if it works or if you still face any issue.
Thanks,
Ratandeep Arora

Canon S100 software unable to install on Windows 8

I am unable to install the supplied S100 software CD on Windows 8 with the following message 'This software does not currently support your system setup' Is there any way of getting round this? I can download the individual programs from the Canon website but it doesn't open the Canon window when connecting the camera by USB to upoad the photos.

Macrnegie,
If you download the latest update for ImageBrowser EX available on the website and run it with the original CD in your computer's CD-ROM drive, the update will search for the CD, then install the latest version of the software. This new version is compatible with Windows 8. ImageBrowser EX is the program you will need to use to import the images from your camera.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Unable to install any Windows on X200s

Similar Messages

Maybe you are looking for