Unable to install Aperture 3 after upgrade to OS X 10.8

After upgrading to OS X 10.8, when I try to install Aperture, I keep getting this error message "To open Aperture, Installer must quit and reopen". I have the box version of Aperture 3, so it's version 3.0 and I will not be able to download the latest dmg off Mac App Store. Any suggestion will be appreciated.

Try if this download link for the trial version still works: if yes, you can unlock it with your serial number from the boxed version:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
To be able to run the installer in Mountain Lion you will have to change the System Preferences "Security & Privacy" temporarily to allow "Applications downloaded from anywhere"
Regards
Léonie

Similar Messages

Unable to install Aperture 2 + upgrade to 3 (boxed version)

I have Aperture 2 with upgrade to 3 (boxed versions). I bought a new MacBook Pro and now I am unable to install the Aperture application. When I install aperture 2, only sample projects are installed. No installation options are offered. There is no Aperture.app in the /Applications directory. When I then try to install upgrade to 3, it somehow recognizes that I already have Aperture 2 (I do not know where), and tries to upgrade. Then I finally have app in /Applications, but it is incomplete, unable to load - does not even launch, just writes that it is missing MainMenu.nib into the console.
What is wrong?

Once you have done an installation it is always good practive to run Disk Utility/ Repair Permission on your system disk, this can help resolve some issues.
Then if this does not work try following the steps listed on the Trouble Shooting Basics page.
Let us know how you go.
Tony

I'm unable to install anything after upgrading to Snow Leopard

I've upgraded to Snow Leopard and after that anything I try to install stops at the Install button. No error messages. No crashing. Just don't install. Even the system upgrade didn't install...
Any ideas?

this may happen if you are using a custom keyboard layout. delete the file /Users/username/Library/Preferences/ByHost/com.apple.HIToolbox.* and log out/in. then try installing something.

I've lost aperture after upgrading to maverick, common apple this is my livelihood.

i've lost access to aperture after upgrading to maverick, my livelyhood is tied up to aperure let alone all of my photographs for clients, come on apple don't do this again.

I tried the link leonieDFsent (http://support.apple.com/downloads/) and was unsuccessful after several attempts at the launching of the applications after download. Not sure why?,
christopherakapaul, the downloads page has update installers, not stand alone applications.
Any Aperture version you download from the Support page will have to run and to install the update to Aperture. For this to work, you need to have an older Aperture version in the Applications folder, and Mavericks must allow the installer to run. For some installers the security&priivacy settings in the System preferences need to be disabled.

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

Open the Mac App Store application and see if iPhoto is under your "Purchases" tab.
Clinton

How to install iPhoto after upgrading to yosemite?

how to install iPhoto after upgrading to yosemite?

Download it from the App Store as Matt suggested. You may have to move the current version to the Trash Bin (don't delete yet), go to the App Store and look for iPhoto 9.6 under purchases. It will be free.
What iPhoto version did you have prior to the Yosemite upgrade? If it was iPhoto 7 (08) or earlier you'll also have to download and run the iPhoto Library Upgrader 1.1 on your library before opening it with iPhoto 9.6.

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Acrobat 10 Pro: Unable to Install Updates After Virus Removed: Receive Error 1310 ?

Acrobat 10 Pro: Unable to Install Updates After Virus Removed: Receive Error 1310 ?
Attempted to re-install the original Adobe Acrobat 10 Pro from the disk provided with the purchase; and it has put me in a trial; and is requesting that I purchase the software I already paid for, two years ago.

You can try a repair (may need to go to Control Panel>Programs & Features). A reinstall is a last resort, but if you go there be sure to uninstall from the control panel, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any part left of the Acrobat folder. Then reboot as the administrator and reinstall. Be sure to disable antivirus during the install.

I can't find some installed apps after upgraded to iOS6.0.1 by sync from iTunes

I can't find some of installed apps after upgraded to iOS6.0.1 by sync fom iTunes. when i try to download them from app store again, it shows OPEN button only but not INSTALL button. is there anyone got this problem too?
I use iPhone 4s.

thanks for ur reply, i tried restart my phone, the most used apps back now. anyway, thank u!
sberman wrote:
If you know where the app is (in a folder, for example), go to that folder and find the app there.
Maybe you tried holding the app down in the search screen. I didn't say clearly you have to go to the app eherever it is, but not in the search screen.

N8 Ovi Store unable to install app after downloade...

Hi all,
Ovi Store in my N8 unable to install app after downloaded. App are succefully downloaded but hang when start installing, i follow the prompt instruction in N8, which is click Smart Installer but prompt same installation process box & the box disappears after that without a successful installation.
App face above problem include Lyrics, Youtube Downloader, Different Tack.
My Nokia N8 firmware details :
Release : PR1.1
Software Version : 013.016
Product Code : 059D1F9
Ovi Store version : 2.06.00042
I'm not sure app at above are Qt app or not. Is it current firmware PR1.1 in N8 doesn't support Qt app yet? Anyboby has idea what's wrong for the Ovi Store?
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below
Solved!
Go to Solution.

It can be solved by 5 steps :
1. Close Ovi Store and uninstall app using Application Manager.
2. Clear your browser cache data (Nokia browser>Options>Clear privacy data>All).
3. Go to file manager to clear installed app file (Menu>Application>Office>File Manager>Options>Find>Select Drive C or E depends where you install the app>Root folder>Type app name you want to remove>Delete founded file).
4. Restart your phone.
5. Open Ovi Store and install the app again.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

Unable to install Dreamweaver CS6 Upgrade ! from Hard Drive DUMP - Error : Adobe Genuine Software Verification Failure

Hello,
I am Unable to install Dreamweaver CS6 Upgrade from CS4 from Hard Drive DUMP -
Error :Installation Failed
Adobe Genuine Software Verification Failure
The product you are trying to install is not an adobe Genuine Software and appears to be counterfeit.
Can any one help me with this issue. I earlier installed it from DVD but, i am unable to find DVD. I have a copy of full DVD Dump in network.
Can someone help me fix the issue.
Note: I have installed Dreamweaver CS4 with serial number.and am trying to install upgrade over cs4.
Please help.
Thank you,
Sin

It was because i was installing directly from network dump.
I've managed to install and register software.
Thanks and my problem is resolved.

Unable to install photoshop cs4 upgrade. getting error message

unable to install photoshop cs4 upgrade. getting error message

but the error message says that Apple Power PC apps no longer supported.
You still need to contact the manufacturer. You need to determine from them if they have drivers that support the OS that is currently installed on your comp or read the following KB Articles:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
A scanner driver you may wish to consider: VueScan Scanner Software

Unable to uninstall an application after installing application after upgrading to Build 9879.

Hi All -
I am not able to uninstall an application after after upgrading to Build 9879.
It says I do not have sufficient privileges to do the operation. I did not have the issue on the previous build of Windows 10. Please help.
Thank you, Slava

Hi,
Search local users and groups to confirm if you are in administrators group, you can search this utility:
lusrmgr.msc
Meanwhile, how about installing new application? Do you have the permission?
Alex Zhao
TechNet Community Support

I have lost my Aperture 2 serial number how do I get a new one so that I can install Aperture 3 upgrade

I have Aperture 2, changed my imac, used the backup system and found that I cannot find my serial number for Aperture 2. I have Aperture 3 upgrade, so can someone please advise how I get my serial number for Aperture 2 please. Hence I can not install Aperture 2, and therefore same problem not being able to install upgrade. Assistance would be much appreciated.
Martin

I was having the same problem, unable to find my trash can. I did everythnig suggested in this post to no avail. Then I discovered if you hover to the far right of RECENT you will see either "Show" or "Hide" "Show" reveals the following, including the trash. I'm sheepish that the solution was so easy but delighted to report that after viewing AND emptying my trash, I gained 55 GB on my HD.

Unable to activate software after upgrading to Windows 8

This post contains one question.
I am unable to activate my Creative Cloud products after upgrading to Windows 8. I have used the Chat service on three separate occasions, and after the employee asks me for my e-mail and order number, determines that they are unable to provide me the instructions necessary to license or activate the software. So I must be forwarded to a special team to help me resolve this problem. During the transfer, I get cut off -- each time.
On Windows 7, I deactivated my Creative Cloud membership through Photoshop.
I upgraded to Windows 8, installing all security updates and restarting the system several times.
Now that all updates are installed, I want to re-activate my Adobe products -- but am unable to find the commands to do so.
I have logged in to Adobe Application manager, using the e-mail address and password that Adobe has in the system for my account.
How do I activate my Adobe products?

Does the solution provided by customer 'kipedias' in this post http://forums.adobe.com/message/4903206#4923341 resolve the issue?

Unable to install Aperture 3 after upgrade to OS X 10.8

Similar Messages

Maybe you are looking for