Unable to install Boot Camp 3.1 on Win 7 on iMac Intel (suggestions?)

I got the OEM version of Windows 7, professional and 64 bits, and installed it via Boot Camp Assistant. Got it running (no keyboard recognition), and tried to install Boot Camp for Win 7 via the Apple site:
"Unable to install 3.1, needs 3.0".
No problem, insert OSX disk (10.6.3), click, aaand:
"Boot Camp 64bit is not supported on this model"
Uh?,... I thought that my machine was supported (it's running Win7 64bits!),... any suggestions?. Am I doing something wrong?. Any help will be appreciated.

Unfortunately I cannot answer your question but I'm hoping someone can help us. I went a step further than you. I have an iMac 8.1 Intel Core 2Duo 2.8 GHZ Processor (early 2008). I spoke with Apple Customer Support and made it clear that I had Windows 32 bit and 64 bit software and wanted to install on my iMac and MBP. The agent told me to order Snow Leopard for the iMac. I found out tonight I cannot use 64 bit on this particular iMac even though Customer Support had the serial number and data when we ordered the Snow Leopard disc.
So, I partitioned the HD equally between Mac and Windows. Boot Camp installed Windows 7 with no problem and then encountered the same thing you did. Install Boot Camp 3.0 before 3.1. When I put the brand new Mac OS X Snow Leopard from Apple in the iMac it said 'not supported'. I tried to install but it won't.
Funnything is Win 7 seems to be running. I am having problems with the numeric keyboard on the UBS keyboard. I haven't really tried to do too much.
My question to append to yours is how do I go about uninstalling Windows 7 and installing Windows 7 32 bit?
I'm sick about this but at least I believe I can install the 64 bit on my current MBP. I wanted it on both my computers.

Similar Messages

Unable to install Boot Camp Update 3.1 on Windows 7 32-bit on MacBook Pro

I have Windows 7 Professional 32-bit on my MacBook Pro and have Boot Camp 3.0 now. I've tried to install Boot Camp 3.1 both using the Apple Software Update on Windows and the installation from http://support.apple.com/kb/dl996 but it won't work. Are there any ways to solve this problem?
Message was edited by: Ho Ren Sen

Hi and welcome to Discussions,
do you have any kind of Remote Viewing software installed, like LogMeIn or Go To My PC ?
These are known to cause trouble with the the BC Driver packages.
Check if there are additional Graphics Adapter shown (apart from the "real" one).
If so, uninstall the remote software, do the 3.1 update and then reinstall.
Regards
Stefan

Unable to install Boot Camp and Windows 8.1 on Mac Mini

Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
Doug

Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

Unable to install Boot Camp Drivers for Windows

Mac Pro (2) 3.2 Xeon quads
Mac OS 10.5.2
Boot Camp side - Windows XP pro x64 w/SP2
Step 3 listed in the instructions for setting up Boot Camp is to Install the Boot Camp drivers for Windows. At this point Windows recognizes my Mac Install disk 1. I get the following message: "the installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again." I am not sure if I needed to do something to install the Service Pack 2? My firmware is at MP31.006C.B02 and 1.25f4. When I checked for the latest firmware, it returned a message that it was not necessary.
Maybe the XP pro x64 is not compatible?
Barry in St. Louis

I did install windows xp sp2 32 bit on my macbook pro 2.2 GB and I'm getting the same ...
When trying to install boot camp drivers, a message came up saying:
Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista.
The only option it gave me was to click the "OK" button. When I clicked OK , another message came up saying:
Boot Camp Installer completed. The install encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click "finish" to exit installer. I am running a brand new full retail version of windows xp service pack 2. Applecare will not help blaming Microsoft and of course Microsoft is blaming Apple. What a bunch of useless crap!! Can anyone help??

Unable to install Boot Camp 2.1 Updater

I've attempted several times to update Boot Camp to version 2.1. Each time I try to run the update I get the following message:
"The installer encountered errors before Boot Camp could be configured. To retry these operations at a later time. please run the installer again".
I've deleted and downloaded the installer on several occasions only to be confronted with the same message. I've also run the "repair installation" program on the existing version of Boot Camp to see if there is an error that prevents the update working. I've also followed the advice in the following Support Article:
http://support.apple.com/kb/HT1845
Running msiexec /update from the Command Line in XP results in the same error message I quoted above.
Has anyone got any idea how I can resolve this? I'd be grateful for any help offered.

There are lots of things that cause the installer not to cycle through. The two major are 1) a conflict of some kind with a display driver. 2) a conflict with the language of your cuurently running Boot Camp 2.0.
If its your Display driver you need to go to -> Control Panel -> System -> Hardware Tab -> Device Manager -> Display Adaptors.
Look at how many Display adaptors you have. You really only need one(which sometimes is there twice). If you have more than one then you probably have a program like "GoToMyPc" or LogMeIn" which has put it's display adaptor there. If that is the case then you need to first unistall the program and then in the Display Adaptors section -> del the driver.
Test if this is the source of your prblem by running the installer again.
(P.S) there are a few PC video games and other programs that install Display drivers so if you dont have either of the Remote Access Programs I mentions be aware that that the conflicting Display Driver could be comming from another program.
If your problem is a conflict in the language of your running version of Boot Camp then you'll need to do the following
in Windows goto Start ->Run -> type "regedit" click OK -> in the new window go to EDIT -> Find -> type "Boot Camp Services.
The Boot Camp setting should come up if they did not come up try another search with Boot-Camp Services. Look at the language settings. If you run in English it should have a Value of 0X00000409 (1033). If it does not then modify the info to match. This only works if your set to English. If not then you will need to investigate the values for your language.
I Hope this helps.

BSoD after installing Boot Camp 3.0 into Win 7 Pro x64

I installed Windows 7 Professional x64 into the partition created by the Boot Camp Assistent (3.0.4), the whole windows setup worked just fine and finished as usual. Then, after the final reboot to finish the windows setup I installed the Boot Camp software and drivers from my 10.6 DVD. The setup finished and promted me to restart the system - no problems so far. But just as Windows rebooted and was about to show the desktop, it crashed with with a BSoD providing no precise imfomation as to which driver could have caused it.
I have re-installed Windows and Boot Camp about ten times now, and no matter what I tried, the result always remained the same.
I booted in Safe Mode and tried to update to Boot Camp 3.1 and 3.2, but near the end of the setup it shows that Keyagent and MacHAL could not be installed (Setup said the Updates were installed successfully though).
When I rebooted Windows normally it was still the same - BSoD just when the desktop was about to be shown.
I have absolutely no idea what causes this. The BSoD only shows a hex-code, but I wasn't able to write it down since it disappears too quick and I don't know how to 'pause' using the integrated keyboard.
• Computer is a MBP mid '09 running 10.6.8 with all updates
• Boot Camp version is 3.0
• Provided drivers on the Snow Leopard DVD are for XP and Vista/Vista x64 only, but since the setup completes without any error message I assume those Vista drivers are OK
• Windows - as stated above - is a 7 Professional x64
So, does anyone have an idea what might be the problem and/or how to solve this issue?
If any possibly useful information missing please ask and I'll add them.
Thanks in advance

Well, at least my Windows won't boot after renaming them to *.sys.old.
But anyway, these two drivers aren't the cause, instead it's actually BootCamp.exe and/or the trackpad or keyboard drivers.
This guy had the exact same problem and the 'solution' was to disable BootCamp.exe.
https://discussions.apple.com/message/10301692#10301692
I finally managed to install all Boot Camp updates but still nothing has changed; as soon as I launch BootCamp.exe or change settings for the trackpad the system crashes.
It seems I have two options now: Use Windows without "Tap to click", "Secondary Tap" and modified keyboard settings, or find suitable trackpad/keyboard drivers.
Speaking of which, is there any chance to get Boot Camp drivers for Win 7? Maybe this would solve my problem since I only have Vista/x64 drivers which I used for Win 7.
Thanks!

Unable to keep Boot Camp running

My Setup: late 2013 Imac, 1tb SSD, 32 gig ram, full updated, latest drivers from Apple. Win 7 Ultimate ISO download from Microsoft, USB installer created by Bootcamp assistant, 120 gig Win partion created by Bootcamp assistant.
Win 7 installs, Office 2010 installes, run all windows and office updates.
Restart into boot camp partion
Partion corrupts on reboot and becomes unuseable. Using option key at startup; bootcamp partation not available.
Boot camp partition does not show up in Startup Disk as a bootable partion.
Open boot camp assistant; remove Win 7 partion. Back to 1tb ssd.
Any and all Suggestions greatly appreciated and thanks for them in advance.
If I am forgetting anything please let me know what other info I can give.

thanks for all the info. I have tried them all. No joy. Just unable to install boot camp on this Imac.
I am beginning to think it is the SSD.
Was on the phone for an hour with Apple Care no joy.
I am going ot try on my MBP

Install Boot Camp on 3rd drive (3TB)?

I just installed a new 3TB drive in my early 2008 Mac Pro, which is runing ML. I would like to use Boot Camp to install Windows 7 on a 300 GB partition on that new drive and to have it bootable. I would like to retain the rest of the drive for use in OS X. Is this possible?
Also, it says the following in the "...problems creating a partition" section of Boot Camp Installation manual:
If you have a Mac Pro with more than one internal disk and you want to install Boot Camp on a disk that isn’t in the first hard drive bay, remove the drives in the lower- numbered bays. You can reinstall the drives after you install Boot Camp
Given that Boot Camp Assistant is running in OS X & OS X is on the 1st drive, then at what point would I remove the 1st & 2nd drives?
Thanks,
Bev in TX

Okay, after rereading a number of messages in this forum, I think that I finally understand what is going on. Namely, if I want to install MS Windows 7 on a drive other than #1, then I would:
Temporarily remove all other drives.
Install MS Windows 7 using the installation media (DVD).
Install Boot Camp drivers that were previously saved on a USB flash drive or DVD.
Shut down Windows.
Reinsert the other drives.
I have an older 300 GB data drive (#2), which I could:
Move the data from this drive to the new 3TB drive.
Install Windows as above.
Is this correct?
Thanks,
Bev in TX

How to install boot camp on my macbook pro?

How to install boot camp on my macboo pro 15-inch early 20011?

Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/

How to install Boot Camp on a MacBook Pro 2011

Well I bought a new MacBook Pro and I have constantly been trying to install Boot Camp.
When I open Boot Camp it shows me the Introduction, then it asks me if I would like to install the Lastest Windows Supports Software From Apple, and if I would like to Install Windows 7. I tick both boxes and then another page opens.
It asks me if I would like to install it to a DVD or CD, or if I would like to install it to an external hard drive. Now, I have tried both of these, and they both show a page asking me how much space I would like to be Mac space, and Windows space. After I've chosen how much I would like, I click install. After about 30 seconds, a message pops up saying the installer disk could not be found, please insert the installer disk and wait a few seconds, and the click install again.
I have done this many times, and that same message pops up. Please, if any of you people out there have the solution for me it would be gratefully apreciated.
Thanks.

No, it doesn't. You have to purchase the Windows 7 installer. Windows is not included with the computer. Did you discuss the matter with someone when you bought your computer? If you did they should have told you that you would need to buy Windows 7. If you had asked while you were purchasing the computer then you could have paid for Windows at the time and had it installed for you.

I am trying to install Boot Camp but it says I haven't got enough free space to make a partition, however in disk utility it says I have 27GB free!

I am trying to install Boot Camp but it says I haven't got enough free space on my start up disk - that I need at least 10GB free space - however in disk utility it says I have 27GB free!

if your SSD is only 60 GBs, then you don't have space on which to install Windows. That 27 GBs is space you need to have for adding files you create, music you download, added applications, pictures, etc. You need to maintain at least 10 GBs as free space for OS X, plus you need space for files OS X will create and add to over time.
Your 60 GB SSD is just a minimum usable size for OS X. There isn't sufficient space to also support Windows which requires close to 25 GBs of the 27 GBs you still have free. Sorry, but that just doesn't really work well.

Can't install boot camp(Am in desperate need of help!!!)

Ok, the story, I will try to make it short:
-Got my Imac a month ago. Installed Boot Camp Vista Home Premium 64 Bit. No problem. Ran smooth.
-Later I got VMWare fusion and decided to check it out. Didn't like to to much, but now I can't install Boot Camp.
-When using Boot Camp assistent, it creates my partition(which 200 GB) Fat32! The problem is, when it wants to boot to install. It ejects the Vista installation DVD! No matter what I do.
-*If I hold down the ALT key(option button) during start up*, it will show a grey screen with two options(The Macintosh HD and the Windows Partition). Selecting the Windows partition gives a black screen with an error; *"non-system disk press any key to reboot"* Only problem is that the keyboard was dead or frozen so had to crash the machine.
-Pressing D on start up to enable the *Apple Hardware Test* showed no problems.
-Pressing Alt + Cmd(command) + P + R to *delete the NVRam and PRAM*, did not have any effect. I think I did it right though, because there came a second start up sound.
-Pressing S + Cmd(command) on start up to run *User Single Mode*, with the command; "/sbin/fsck -fy" did not reveal any problems either, except for a weird long messege that kept coming up, and which interupted the line I was writing on several times. The messege was as follows: +":/root# AppleUSBEHCI[0x6e8t000]:: Found a Transaction Past the completion deadline on bus Oxfd, timing out!(Addr: 6EP:4)"+
*Ran a program called Partition Inspector;*
* Report for internal hard disk *
+Current GPT partition table:+
+# Start LBA End LBA Type+
+1 40 409639 EFI System (FAT)+
+2 409640 1531068455 Mac OS X HFS++
+3 1531330600 1953525127 Basic Data+
+Current MBR partition table:+
+# A Start LBA End LBA Type+
+1 1 409639 ee EFI Protective+
+2 409640 1531068455 af Mac OS X HFS++
+3 * 1531330600 1953525127 0c FAT32 (LBA)+
+MBR contents:+
+Boot Code: Unknown, but bootable+
+Partition at LBA 40:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 1, type EFI System (FAT)+
+Partition at LBA 409640:+
+Boot Code: None+
+File System: HFS Extended (HFS)
+Listed in GPT as partition 2, type Mac OS X HFS++
+Listed in MBR as partition 2, type af Mac OS X HFS++
+Partition at LBA 1531330600:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 3, type Basic Data+
+Listed in MBR as partition 3, type 0c FAT32 (LBA), active+
I don't know what any of this means, but I suspect the Boot Camp partition is the last one. I wonder what "Boot Code: None(Non-system disk message" means!?
*When running diskutil:*
*diskutil list*
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *931.5 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Macintosh HD 729.9 Gi disk0s2
3: Microsoft Basic Data BOOTCAMP 201.3 Gi disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDiskpartitionscheme *931.5 Gi disk1
1: WindowsFAT32 My Book 931.3 Gi disk1s1
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: FRMCxFREDADVD *3.5 Gi disk2
*And when I searched on the boot camp disc specificaly:*
Device Identifier: disk0s3
Device Node: /dev/disk0s3
Part Of Whole: disk0
Device / Media Name: Untitled
Volume Name: BOOTCAMP
Mount Point: /Volumes/BOOTCAMP
File System: MS-DOS FAT32
Partition Type: Microsoft Basic Data
Bootable: Is bootable
Media Type: Generic
Protocol: SATA
SMART Status: Verified
Total Size: 201.3 Gi (216110792704 B) (422091392 512-byte blocks)
Free Space: 201.3 Gi (216109285376 B) (422088448 512-byte blocks)
Read Only: No
Ejectable: No
Whole: No
Internal: Yes
Other things I tried:
-Tried going into Startup disk, to force Vista to install from boot up, but it ejected upon startup anyway.
-Tried rebooting while holding down "C" to force a startup from a CD/DVD. Vista installation DVD still ejected.
-Tried reinstalling Leopard with the Leopard Installation Disc 01, but it also ejecred upon rebooting to install! < This lead me to believe that it's my Superdrive that is messed up, but it plays DVD Movies just fine, and I even just now just burned the Vista installation DVD to my desktop in a .dmg file. So I am not sure if that is it!
-I tried taking a different Windows Vista DVD(Windows Vista 32 Bit Home Premium) to see if it could install from that. It could not, and ejected upon startup like the Leopard and 64 Bit Home Premium Vista Installation DVD!
I am new to Mac, but I am desperate after getting boot camp to work again. I have litterly been trying to figure this out for days, and I can't get it to work. I tried to call Apple but they couldn't help me.:( I could really use your help. I just want it to work.
And speaking of working, I haven't been to work for two days, because I have been home trying to figure this out. It's critical that I get boot camp working. So please, mates, can't you help me.
I simply don't know what to do:(
Cry
-Oil Pedestal

Does [this firmware update|http://www.apple.com/downloads/macosx/apple/firmware_hardware/imacefifir mwareupdate13.html] apply to your machine? If so, putting it on may fix the boot from DVD problem.

Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

Blue screen of death after installing Boot Camp on Windows 7

Hello and thanks for the help!
Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
Help!?

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Can I install boot camp on new startup drive?

I find I have to use Windows to administer a Network Solutions
hosted and built website. They claim to support Mac OS but
there are issues and they tell me that Internet Explorer is the
more reliable browser to use. So I'm wondering if I should
replace my primary drive with a new one and install Boot
Camp. Is this a workable solution? Should I consider one
of the virtualization programs?
Tom

I would suggest trying a VM first, and I would suggest using VirtualBox (as it is free), it will work but with a slight performance hit. If the hit is more than you can stand go the Boot Camp route.

Unable to install Boot Camp 3.1 on Win 7 on iMac Intel (suggestions?)

Similar Messages

Maybe you are looking for