Unable to install Cisco Jabber Video in Windows 8

When I attempt to install Cisco Jabber Video for TelePresence (version 4.6 and 4.7) in Windows 8, I get the following error message:
The error says: "The wizard was interrupted before Cisco Jabber Video for TelePresence could be completely installed. Your system has not be modified. To complete Installation at another time, please run setup again. Click Finish to exit the wizard."
The error occurs for 4.6 and 4.7. What can be done to resolve this issue?

Hi Robert,
Is Windows 8 on a Surface Tablet or desktop/laptop?
If Tablet, this platform is not supported. No ETA on when a version will be released to support this.
If desktop/laptop, then you need to update your video driver by visiting the website of the manufacturer, i.e. Intel, nVidia, ATI, etc. The latest video driver cannot be obtained by using the Microsoft update tool. These drivers are usually generic and/or not the latest.
Once installed, this error should go away.
If installed and you still get the error, then this means your video card is unsupported and you will not be able to use this software.
Jason

Similar Messages

Unable to install Cisco VPN Client on Windows 7

Hello,
After a successfull uninstallation of Cisco VPN version 4. I try to install Cisco VPN Client version 5.0.07.0290.
But after launching vpnclient_setup.msi, the wizard is starting. When I click on Next button, I have the following message: "installation ended prematurely because of an error".
In attachment, I add the details of the error find in the windows logs (logError.txt) and the logs generated from MSI installer in verbose mode (log2.txt).
My computer is a lenovo W500 with Windows 7 64 bits and 4 GB of memory (compliant with the Cisco VPN Client requirements).
I have administrator privileges on this computer.
Please help me !
I need to use it to connect to my company network.
Thanks in advance.
BR
Jerome

You should be able to install the 64 bit version of the Cisco VPN software
Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
Using Shrew VPN is a workaround more than a solution / answer to this issue.
You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
MicrosoftFixit50842.msi

Bug? Cisco Jabber Video for TelePresence and spanish keyboard

Hello everybody,
because of a customer request I checked Jabber Video with spanish keyboard configured (traditional sort) an figured out, that with this configuration the Jabber Client (tested with 4.2, 4.6 and 4.8.8) doesn't accept the pound key when it is pressed on the keyboard. In Word for example the pound key works as expected. At the moment I told the customer to use the "onboard" keyboard in the Jabber Video client, but I think it is a bug (don't know if it's a bug in Jabber Video or Windows 7). Has anyone experienced the same? Maybe this will be fixed in future?
Regards, Daniel

You can have both "free" and "enterprise" versions installed on a Mac.
If you already have "enterprise" version installed on a PC, and you install the "free" version, the registry settings will be changed and server setting locked to
https://sjc1-movi-pr-bootproxy-vip.ciscojabbervideo.com/endpoint/configuration
when you install the "free" version, so ,no, you can't have both versions installed on the same PC.
You can change the registry settings so it's not locked to the Cisco server, but then you might as well just have the "enterprise" version installed and just edit the internal server settings to use the above URL if you want to make it behave as the "free" version.
There's no difference, clientwise, between the two, the server settings determines which server it will register with, and provisioning settings will change accordingly.
/jens

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

MBA (mid 2013) and Cisco Jabber Video client not recognising any camera

The Cisco Jabber Video client is not recognising the internal Facetime HD camera nor the external USB Logitech Webcam C920.
This was not working from the beginning. Cisco is aware of this issue and promised to deliver a fix in the next release of their software.
After installing the 10.8.5 Update from App Store and the 10.8.5 Supplemental update the Cisco client was able to recognize the external camera.
After that I followed a hint to install the Combo update this should enable Skype to recognise the Facetime HD camera. After installing the Combo update Skype was able to recognize the internal and external camera (by the way the quality of preview video using Facetime HD was brilliant and much better than the internal camera of a MBA from 2012). BUT after that update the Cisco client was no longer recognising a camera.
I run a recovery installation of 10.8.4 - but the result was again a 10.8.5. If I try now to run a recovery install I only get a recovery of version 10.8.5 offered.
I did a SMC reset, a parameter RAM reset, tried to start in saved mode but nothing helped.
Any other ideas how to get a least an external camera working again with Cisco Jabber Video?

Similar problem here. I have a Logitech C615 camera/microphone plugged into my MAC mini running OSX 10.9.3. Today, JABBER could not find the camera (although it found the microphone?). I was running 4.5.7 and so downloaded v4.8.6 and reinstalled: no camera. I also downloaded the cloud version: no camera.
I was not running either Vidyo or Polycom RealPresence at the same time as JABBER
But, when I did run these apps, my camera & microphone both work.
Suggestions?
John

Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil Kumar

You really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Unable to Install Crystal Reports 2008 on Windows 7 64 bit

Hi,
I am unable to install Crystal Reports 2008 on Windows 7 64 bit laptop. Is this not supported?
BR, Nanda Kishore

i INSTALLED NOW

Unable to install C4500 HP printer on Windows 7

unable to install C4500 HP printer on Windows 7 - printer installation disc only supported by xp and vista. What do I need to do??
This question was solved.
View Solution.

Hi,
You may download the Windows7 compatible software below:
http://ftp.hp.com/pub/softlib/software11/COL30130/mp-74912-1/PS_AIO_04_C4500_USW_Full_Win_WW_130_140...
Make sure the USB cable is unplug before performing the installation.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to install Adobe CS2 Premium on Windows OS 7. How do I fix this ?

I am unable to install Adobe CS2 Premium on Windows OS 7. My discs require activation but do install to the OS. The non-activation version recommended gives the error message that" this version is not compatible wih OS" and will not install.
Thanks, Liz

Hi Issieoo,
Though you may install Cs2 on Windows but you may face performace issue. Please find the System Requirement for installing for one of the CS2 product: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop.html . However I would recommend you to purchase the new CC realease with more enhanced functionalities and features.
Regards,
Romit Sinha

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?

Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H.

How to install Cisco Device Manger on Window 7

Hello
Is Cisco device manager supported on windows 7 ?
If yes how to install Cisco Device Manger on Window 7?
Please advise
Thanks
Chetan R

You can install the latest DCNM 5.x for support, please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/release/notes/dcnm_5_1_relnotes.html#wp179665
Support for Windows 7 and Windows 2008
In Cisco DCNM Release 5.1(3u), the Cisco DCNM server supports Windows 2008 and the Cisco DCNM client support Windows 7.
You can download the DCNM from the Software Download. Device Manager is bundled in DCNM.
For DCNM-SAN installation please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/installation/guide/inst_troubleshoot.html
I hope this helps.
Carlos

Cisco Jabber Video 4.4 sound delay

Hello!
I have a client that is running Cisco Jabber Video 4.4 and they have problems with the sound.
It's good quality sound, but there is about 3-5 seconds delay when they talk.
Do you have any tips what they can do about this?

Check the machine to see how much CPU is used. If high, the machine can't handle the call. If machine is good, check network connection with videotest.webex.com. If good, make a call, and while in the call, mouse over the 'i" information icon and look at the stats. See if the video and audio have high packet loss, FEC errors, or high jitter. If so, their connection to the internet is not clean and they will have issues.

Cisco Jabber Video 4.7.4 thinks 4.6.3 is the "latest"

When users log in with Cisco Jabber Video 4.7.4 (Mac), a message appears asking them to "update" to 4.6.3.
Which is nonsense.

Are you sure your TMS is configured properly with the correct version of Jabber for Mac set in the Provisioning Directory? I believe this OS X Software Version setting defines the current version the TMS expects to be used.

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Unable to install Cisco Jabber Video in Windows 8

Similar Messages

Maybe you are looking for