Unable to install clean Recovery & Application/drivers on new hard drive

My HDD failed on Satillite P25-s526. I replaced it with OEM new drive. Also upgraded the RAM from 512mb to 2GB's. I have attempted to do a full recovery of the system using DVD which came with the computer.  DVD formats partitions in new HDD, loads the restore tool & downloads. Upon completion, Restore Tool indicated 100% complete. Recovery Disk removed when indicated & system states "Please wait while windows prepares to start...". After a short while, the screen goes dark but the HDD indicator light indicates it's still processing. After a short period, the computer does nothing! I have left it on for at least 1 hour to see if it would reboot. Nothing! Upon restart, I do not get the Toshiba splash screen & the OS starts with the Windows XP/SP1 screen and then the screen goes blank! Boot to Safe Mode loads and then a pop up indicated that only part of the OS loaded and to reload. I have done this twice with the same results. Any ideas on what to try next?   

Thank you for your quick response. I have been able to confirm that the new hard drive is in fact, the exact model and nominclature as the original (MK8025GAS HDD2188). I have also rechecked that I installed it correctly, since the HDD can be configured as both master or slave.  SET UP acknowledges the hard drive and it's capacity.The Rec & App/Drivers DVD appears to be in good working order.  I have been assured by the manufacturer that the HDD supplied is the exact replacement to the original and is not have ATF.
Toshiba trouleshooting for this HDD states that reports of systems not being able to recognize all available capacity of this hard drive & offers two 3rd party suggestions to correct the issue. They are EZ DRIVE by Micro House and Disk Manager DiskGo by Ontrack. Unfortunately, neither would do me any good since I cannot install them in the computer present condition. Further more, I'm not sure that they would help since SET UP indicates formatted Capacity of 80.012GB.
I was running Vista SP3 when the HDD crashed, I wonder if the drivers etc. have not reverted back to their original configuration with the Rec & App/Drives Disk?  Grasping for straws now!

Similar Messages

  • Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive

    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive.
    Tried to reset pram, smc, nvram.
    Tried installing new RAM.
    Tried installing new hard drive.
    You should know that my internal drive is installed in a cheap external case and plugged in a USB 2.0 port because i am waiting for a new hard drive cable.all
    Yep all good things happened to me...i don't know if all these problems are linked, ahh and also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost. My computer is not under warranty anymore so i'd like to avoid a trip to the Apple store but i'm close to doing just that.
    Any help appreciated...

    It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
    That said, the two comments:
    Le husky wrote:
    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
    .....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
    would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
    ...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
    I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
    In any case, good luck.

  • Please HELP!! MacBook stuck on "Select your Keyboard" screen after installing Snow Leopard on a brand new hard drive!

    Hello, I just recently replaced my internal hard drive in my MacBook [from a 250gb to a blank/empty 750gb]. I managed to get OS X Snow Leopard installed with the DVD. Setup seems to run fine at first, I get the screen in space with the welcome message different languages while music plays. Then I'm asked to select my country, then here is my problem- the next screen asks me to "Select Your Keyboard", I select & click "Continue" button, then my Mac is just showing the spinning beachball & it stayed that way all night =( I don't know how to fix this. Anyone experience this or have any solutions for me? I'd appreciate any help! Thank you! [I've been googling since yesterday with no luck on finding an answer].

    It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
    That said, the two comments:
    Le husky wrote:
    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
    .....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
    would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
    ...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
    I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
    In any case, good luck.

  • Re: How to install Windows from recovery media on a new hard drive?

    Immediately after a Windows update, my computer would not restart. It said disk error.
    I could not start it from the recovery media and F8 would not work. I bought and installed a new hard drive. Now when I put in the recovery media to install Windows on the new hard drive, it gives an error message.
    What can this be? Should I be able to install Windows from the recovery media?
    It is Windows 7 and the laptop is Satellite A500, 64 bit.

    Hello
    Generally speaking you can install recovery image on every compatible HDD so thee should not be any problem about it.
    Please tell us what happen when you start recovery installation. Which error message is shown?
    Is new HDD recognized in BIOS. Before you start recovery installation set BIOS to default settings.

  • Will recovery disks work on new hard drive

    I just installed new hard drive on hp laptop with Windows 7 64 bit. I used the iso file installation disc. Now I would like to use the recovery disks I made 2.5 years ago to load the original software and drivers as when the pc was new. When I put Disc 1 in the drive the pc does nothing. I've been reading online that you have to change the order of the drives in the BIOS so the pc will boot from the dvd drive.
    Then further research online, I read that recovery disks will not work on a new hard drive, and on a smaller drive than was previously installed.
    I did do a full system backup from old hard drive, so I have those 3 discs. I have not tried that. Basically all I use pc for is web browsing,email and an occassional movie.
    I guess I just want it to seem like a new pc with all the original software and drivers.
    I downloaded hp support assistant, however it states that new updates are not needed. That can't be right.
    I went to hp download page, but not sure which drivers/software to download.
    This is wearing me out. Please help if you have any suggestions/advice. Thank you!

    Paul, thank you for answering. I have a HP Pavilion DV7-4270us.
    From my research, I don't believe the operating system is on the recovery disks. I am very hesitant to work with the recovery disks again. Anyway my new hard drive is 500 GB which is smaller than the old 640 GB that was previously installed from the factory. So the recovery disks may not work on a smaller drive.
    At this point, I would like to get back HP Media Smart and Synaptics click pad working. I have downloaded the driver for the clickpad, but it does not operate like it used to. No settings to choose from etc.  I downloaded the Media Smart Software package and driver, but the software package is not there. I was just reading online, and found a link for the Simple Pass Identity Protection fingerprint reader. I downloaded it, and seems so far to work. Also, on the keyboard the light on the keyboard button for (volume on and off) remains lit all the time. It used to light up only when the volume was off.
    Man, you sure can run into all kinds of problems when you install a new hard drive. Any suggestions will be greatly appreciated!!  Thanks, Ken.

  • Unable to restore time machine backup onto a new hard drive

    I recently bought a new hard drive for my mid-2010 white Macbook. I have kept this computer regularly backed up with time machine, but just to be sure I made sure I hooked up my external hard drive prior to changing the hard drive and made sure it was fully backed up. I checked my exceptions and saw that my system files and applications were listed, so I removed them from the exceptions list and let it back up again (it only backed up a further 60MB though, so that made me a little uneasy).
    I successfully switched over the hard drive and then plugged in my external hard drive so I could do a restore from Time Machine. My external hard drive has 3 partitions: 2 time machine backups for each of my computers, and one partition for storing files that also has an old copy of 10.6 on it.
    When I booted the computer, I held option, then selected Macbook TM. When it came to the window with 4 options, including disk utility and restore from time machine backup, I selected restore from Time Machine backup. When I did so it said "No OS X Backups Were Found." Why wouldn't it have backups listed if I have been consistently backing it up? How else do I do a full system backup?
    Also, how can I be sure that I'm restoring this backup onto the new hard drive? It didn't prompt me to select that drive at any point, and I want to make sure I'm not overwriting the middle partition on the backup drive (or anything else).

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for your Time Machine backup drive.
      5. Click on the arrow button below the icon.
    Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

  • Can I use recovery disks on a new hard drive on a dv4?

    I know the hard drive is toast in my dv4. Can I use the recovery discs I made when I got the computer to load a new hard drive?
    This question was solved.
    View Solution.

    Yes you can. That is the purpose of having the recovery media.
    Replace your hard disk with one that is of equal or larger capacity. That does not mean use a larger than 750 GB hard disk unless yours had one installed when delivered. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I can't install Snow Leopard on a brand new hard drive with a brand new optical drive.

    I need help please. I have a 2009 MacBook Pro. The hard drive crashed a while back so I bought a new one. The original Snow Leopard disc that came with it was scratched so I bought a new one of it as well. After trying/failing to install Snow Leopard on the new hard drive about a dozen times I bought a new optical drive as well. I installed the new optical drive today, tried to install Snow Leopard again and STILL got the same installation error messages. Any help that anyone might be able to provide would be greatly appreciated.
    Last error message:
    Install failed: The Installer could not copy the necessary support files.

    Did you partition and format the new drive first?
    Drive Partition and Format
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Upon completion quit Disk Utility and return to the installer. Complete the Snow Leopard installation.

  • How do I restore my bookmarks and favorites from the Firefox servers using my recovery key with a new hard drive?

    I set up Firefox sync before getting a new hard drive. My understanding is that my favs and bookmarks would be stored on Firefox servers and could be synced to any of my devices.
    However, now that I'm trying to restore to my new hard drive, it appears that I was supposed to sync previously with another device. I do not remember that explanation previously. I thought that my data was in the cloud and could be pulled at any time.
    I have my recovery key. Can you help me?

    I don't use Firefox sync, but my assumption was the same as yours. Have you tried the steps in the last part of this article?
    [https://support.mozilla.org/en-US/kb/How%20to%20sync%20Firefox%20settings%20between%20computers#w_what-if-im-not-near-my-first-computer How to sync Firefox settings between computers > What if I'm not near my first computer?]
    Do you still have access to your old hard drive, or a backup of your old hard drive? You often can retrieve your bookmarks, saved passwords, settings, add-ons, and so forth from that. If you have access, a volunteer here can describe the process in more detail.

  • Re-installing Linksys Connect on laptop after new hard drive installed

    I have a E4200 router and had Connect loaded on my laptop. My hard drive crashed and needed replacement. I had no problem signing on to my WiFi once I got the new hard drive installed.
    With the new hard drive, I now do not have Linksys Connect installed on my laptop. My question is: Can I re-install Connect with the router running perfectly well or will re-installing Connect with the router already up and running cause me problems?
    Thanks for any help.
    Solved!
    Go to Solution.

    Here is an article on setting up the software after the router was already set up.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=90fabd0b3674497489d42...

  • Can Install Mac OS X on my new Hard drive

    Hi. I cant install MAC OS X 10.4 on my new Hard drive. I turn on the laptop holding the C key but it ejects the DVD after a while the it apears a flder with a question mark. If I do these with the MAC OS X Leopard DVD it takes me to the install page but it says i can be install because I should have MAX OS X 10.5 later install so nothing happend. Can some one help me

    Are you using the discs that came with your computer?
    Have you formatted the hard drive?
    ~Lyssa

  • Can I copy Applications to a new Hard Drive?

    My PS4 is very much scraping the upper limits of it's 500GB Hard Drive (I had to go on a purge just so I could fit Arkham Knight onto the system). But the one thing that's really putting me off taking the plunge and getting a new Hard Drive is I can't find an answer to whether or not I can copy an application straight over. I know for the most part just redownloading the application is the easiest scenario, but in this case the application I'm trying to preserve is 'PT', which to the best of my knowledge I can never get back once it leaves my system. So is there any way I could get it on my new Hard Drive given that it's no longer available to download? 

    Do a full system backup to an external drive, it has been confirmed in another thread that EVERYTHING is backed up, that means downloaded games, so a demo would be no different Settings>system>backup and restore

  • How do I install ACC, already purchased, on a new hard drive?

    I already purchased ACC, but how do I access a version for a new hard drive?

    Login to creative.adobe.com with your Adobe ID.
    Click on Apps, download the AAM (Adobe Application Manager) and them download the apps.

  • HOW DO I SAVE APPLICATIONS INSTALILNG A NEW HARD DRIVE WITH NEW OS?

    I recently purchased a used G5 that is loaded with programs. I am getting signs that the hard drive is getting ready to crash. I installed a 1TB hard drive and formatted it. What I want to do is install leopard on the TB hard drive but still transfer all the applications and programs over from the old HD. A lot of the programs I don't have serial codes for. Can I do a new OS instilation on TB HD with new users and everything and still transfer all the programs over that I don't have serials for and them work perfectly without entering in new serials.

    No. Either ask the original seller for the discs, manuals, and serial numbers, and ensure they destroy their copies of the data, or purchase your own license for the software that they did not supply on disc and/or legitimate license code. The license to the software is limited to whomever has the software in hand with its codes. Purchasing Leopard will only entitle you to the contents of Leopard. Leopard retail on its own does not include iLife, except for iTunes, though Apple does have a Mac Box Set which includes iLife and iWork. The original discs that came with the Mac still have a hardware test which you can't get other than by requesting them from the original seller.

  • Installing Mac OS X on a new hard drive

    Hi,
    My hard disk got corrupted which had OS X Yosemite installed on it. I have purchased a new internal hard drive 500GB. I am stuck on how to install the Mac OS X again on the new drive. Any help on this will be much appreciated.
    I don't have any backups to clone the disk neither I have a OS disc that came with the original. Please help!
    Thanks in advance

    Internet Recovery is cmd-Opt-R, but if your Mac was built before 2011, it may not be capable of Internet Recovery.
    If it can't do Internet Recovery, you'll need to find the original installation disks that came with the Mac. There may be other options, but that would be the simplest at this point.

Maybe you are looking for