Unable to install Crystal Reports 2008 SP07

Hi, everyone
Currently using
Crystal Reports 2008 Product: 12.4.0.966
I have the problem about installation of Crystal Reports 2008 Service Pack.
I could upgrade it to SP4. However, I'm not able to install Crystal Reports 2008 Service Pack 07 update due to the error message product version is too old.
Does someone have any similar experience?
Regrards,
Kano

Hello Takumo,
You can upgrade to SP7 only if you have SP5 or SP6 install. This is why you are getting error when upgrading from SP4 to SP7.
So, you have to follow this path CR2008 SP4 -> SP5 or SP6 -> SP7
Else you can also install full build as suggested by Abhilash.
- CHETAN

Similar Messages

Unable to Install Crystal Reports 2008 on Windows 7 64 bit

Hi,
I am unable to install Crystal Reports 2008 on Windows 7 64 bit laptop. Is this not supported?
BR, Nanda Kishore

i INSTALLED NOW

Getting an error trying to install Crystal Reports 2008 on a 64 bit Windows

reformatted my computer and now I'm trying to install Crystal Reports 2008 on 64 bit windows 7 box. When the "Registering modules" portion of the install comes up, I get a message that a dll has failed to register. I saw something about not having the Microsoft Visual c++ 2005 redistributable pack (x86) installed but that was not it either.
The cd label say Crystal Reports to Crystal Reports 2008 Upgrade, but it does not seem like I have to have the older version of Crystal insatlled.
Any ideas how to fix this ?

Hello together,
i've had the same problem. Tried to install CR SP 2 "cr2008win_sp2.exe" onto an existing CR 2008 SP1 installation, and got the above error. After extracting the cr2008win_sp2.exe to an folder using Winzip (or just start Installation, the source would be extracted to "c:\temp" ), navigate to the subfolder "\package" and execute the CrystalReports.msp (in my case: c:\temp\package\CrystalReports.msp). This start's the Installation of SP 2. If you get an version mismatch, use parameter SKIP_PATCH_VERSION_CHECK=1 by typing command in an dos prompt "c:\temp\package\CrystalReports.msp SKIP_PATCH_VERSION_CHECK=1" but remember, you need to have an SP1 installed (somebody said, SP's are incremental).
Reboot and apply then the CR 2008 SP2 FixPack 7 "cr2008fp27.exe". Use this Link to Download CR and Xcelsius Stuff:
[https://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm]
I would suggest you not to use IE for downloading, use an alternative browser. I got only bad downloads (IE8 on Win7).
This is the way i did and this works pretty good.
Good Luck
Matthias

Error when install crystal report 2008

When i was installing CR 2008 on windows 2008, system shows following errrors during the installation:
error 1904 module c://.../reportSourceBridge.dll failed to register
error 1904 module c://.../reportPromoptEMF.dll failed to register
and i tried to registrate manually buy using cmd:
>regsvr32 ReportSourceBridge.dll
system display this error:
loadlibrary("ReportSourceBridge.dll") failed - the specified procedure could not be found
does anyone can help me?
thanks.

Hi:
i readed this thread:
[Installing Crystal Reports 2008|Installing Crystal Reports 2008]
but this is not the correct solution for my problem
it shows The specified PROCEDURE (not module) could not be found.
Edited by: Abydss on Dec 14, 2009 12:33 PM

Issue iwth Installing Crystal reports 2008

Installed Crystal report 2008 -- Crystal report with no Prompt Runs fine but when try to refresh a report with Prompts thows an JSP notepad page
error - object expected
file:///C:/Users/rzg00/AppData/Local/Temp/prompting1.html
uninstalled an installed but the issue persists
Crystal 2008
java 6 update 30
windows 7
Edited by: cheedalla on Feb 13, 2012 5:08 PM

Hi,
Have you checked installing Crystal report 2008 on different system?
Also make sure that the parameter datatype is correct for the database field datatype.
Please check the required .Net framework is installed and check the crystal report 2008 is updated.
Let me know if this works
Regards,
Rameez Shaikh

Probleming Installing Crystal Reports 2008 Service Pack 1 to Vista 64bit OS

Hi There,
Whenever I attempt to install SP1 to Crystal Reports 2008 I am unable to get past the disk space check. It just continues to display the message below.
"please wait while the installer finishes determining your disk space".
I found this to be an issue on the 64bit OS only because I can install to Vista 32bit no problem.
Please help.
Thanks
Mark

Hi Mark,
Try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Now try to install Crystal reports.
Regards,
Shweta

Error while trying to install Crystal Reports 2008 SP3

Has anyone else come across this error before when running the SP3 update installer;
Crystal Reports 2008 SP3 Update is not allowed to install because a patch with a higher version was detected.
The installation then terminates. There has been nothing installed on this server to do with Crystal, aside from CR2008, SP1 and then the attempt at SP3.
ANY help appreciated
Edited by: Ludek Uher on Aug 18, 2010 2:07 PM

Priyanka,
I'm already extremely annoyed that a new server build requires installation of CR2008, then SP1 before SP3 will even allow installation. Adding SP2 into the mix just makes it seem like none of the developers tested anything (which I'm seeing from just about every software company I deal with these days).
Besides, the 'SAP Business Objects Support Software Downloads' page no longer lists SP1 or SP2 as available downloads, so I'm going to have to try Don's solution first.
Regards.

Unable to install Crystal Report 8.5

Hi all,
I really need some help as I have problem installing Crystal Report 8.5 on another hard disk as my previous hard disk crashed.
I have tried the calling tech support hotline @ 800-4922129 but they said they are not able to find my company's name in their database.
It might be due to the merging of SAP + Crystal Report and this crystal report is installed way back in Year 2001.
The technical support personel said there is nothing she's able to help me if I do not have the customer no and the only way is for me to post @ the forum at this website.
My company is currently based in Singapore.
The only information I have is the CD Keycode,Product Keycode and Crystal Decisions Registration Number.
I have 5 license Key which was bought way back in Year 2001.
The problem arises during the installation after I entered the "CD Keycode" and they prompt me to enter the "License Key" which I do not have it.
Would really appreciate your fast response from you guys as I really hope to settle this issue asap.
Thanks in advance.
Regards,
Ryan Teo
Edited by: Ryan Teo on Jul 23, 2008 9:44 AM

Hello Ryan,
as CR 85 is long out of support I am happy to share my keycode
A6A50-0900000-00000ZP.
Hope this helps
Falk

Problems installing Crystal Reports 2008 Server on Windows Server 2008 serv

I attempted to install the Crystal Reports 2008 product on one of our Windows Server 2008 servers.
After installing disk 1
Crystal Reports 2008 Server attempts to open up in IE...... but opens up to a blank page
http://bmlfileserver:8080/CmcApp/
anyone have any idea why? why does it not prompt for the second CD?
Is this a compatibility with Windows Server 2008?

I'm attempting to install CRS 2008 on Windows Server 2008 as well, and I'm running into a few issues. Did you ever get yours resolved? I started by trying to use IIS, but I'm uninstalling it completely now and will try Tomcat instead. Which route did you go?

Error installing Crystal Reports 2008 in Vista

I am trying to load Crystal Reports 2008 on a Vista machine (32 bit). I keep getting an error message and set-up will not continue. Details show APPCRASH.
How can I get this to install??????
Thanks,

Hi Debbie
We would like to know the following information:
- From which source (CD or Website) are you installing the product?
- The link from where you have downloaded the product.
- What happens if you install the product by login as an Administrator?
- Is the download saved on your local drive?
Thanks
Poonam

Unable to Connect Crystal Reports 2008

Hii All,
Plz help...I am unable to connect to my Crystal Reports 2008 software with SAP Buiseness one.
When i create new connection from the Database Exoert ->Selected SAP Buiseness One->After Selecting ->Asking Creditintials like License server Server Type, But when it comes to Company Databae>Drop down the company i am not getting the company list??
Please let me know the Problem and Solution
Thanks & Regards
Cherry

Good days,
Because you enter invalid SQL Server authentication.
Please enter your :
License Server : localhost
Database Server Type : (your sql server version)
Database Server : (your database connection) eg : localhost\SQLEXPRESS
Click the DOT( . ) button.
Database User ID : (your sql ID) eg : sa
Database Password : (your sql Password) eg: p@ssw0rd
Then click connect server.
If Successful then
Company Database : eg : SBODemoUs
Username : manager
Password : manager
Else
Goto (Please enter your
End If

Just installed Crystal Reports 2008...problem

We just installed the crystal reports 2008 to use with EVO - problem - screen comes up and that's it! Can not click on anything...what are we doing wrong????
Thanks

The first time (to answer your questions) no, yes & yes
Uninstalled Crystal Reports and reinstalled - as per your instructions...
still no go.

Error 1305 while installing Crystal Reports 2008, JavaSDK

While installing Crystal Reports from the original media on a new Lenovo Thinkpad running Windows XP Pro SP3 I get the following error while installing:
Error 1305: Error reading from File: c:\program files\Business Objects\javasdk\jre\audio\soundbank.gm. Verify that the file exists and that you can access it.
I have the option to retry or cancel, obviously cancel exits the installer. Retry just fails again. I have tried to access the file (which does exist) and I cannot because it is in use. I used Sysinternals process explorer to find out what has the file in use and it is msiexec.exe which is the Microsoft Installer service which is running in order to install CR2008.
I have tried restarting, setting permissions on the file and folder, uninstalling and reinstalling Java VM from Sun. I even tried killing msiexec (which killed the install). I even tried taking out all reference to java in a custom install.
I am at a loss on what to do next. Any help would be appreciated.
-Michael

I found that if I installed it from a copied local directory instead of the CD Rom that it worked

Unable to install Crystal Reports XI

I am trying to install Crystal Reports on Windows XP SP2 but it comes up with an Error when starting the install.
"Crystal Reports XI installation ended prematurely because of an error"
Then I click "OK"
"Fatal Error during installation "

Hi,
Do you have any antivirus installed on your machine if yes "turn the antivirus OFF" and then try installing
Also Are you trying to install from the CD if yes then try to copy the software into your drive and try to install.
Do you have the administrator permission to your work station. If no then try to login using an administrator account and try to install the software.
Are you trying to install CRXI from the network drive if yes then try to copy it on to your workstation and install the software.
Regards,
Vinay

Unable to display Crystal Reports 2008 PDF output on smart phones

Hi Folks,
I'm not sure if this is the proper forum, but here goes. I am just finishing a large ASP.NET web app which makes extensive use of Crystal Reports 2008 and a CrystalReportViewer control. My users routinely e-mail the reports in PDF format. This works great, except now they tell me that when the recipient of the e-mail tries to open the PDF on an iPhone or Blackberry, it will not open. The PDF's open fine on desktop computers.
Here is the code which generates the PDF and attaches it to the e-mail msg.
// export to PDF, then mail that
SmtpClient client = new SmtpClient();
MailAddress from = new MailAddress(ConfigurationManager.AppSettings["ReportMailFrom"].ToString());
MailMessage message = new MailMessage();
message.From = from;
message.SubjectEncoding = System.Text.Encoding.UTF8;
message.Subject = "E-mail BackOffice report: " + strReportName;
MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
Attachment data = new Attachment(memStream, MediaTypeNames.Application.Pdf);
ContentDisposition disposition = data.ContentDisposition;
disposition.CreationDate = DateTime.Now;
disposition.ModificationDate = DateTime.Now;
disposition.FileName = strReportName + ".pdf";
disposition.DispositionType = DispositionTypeNames.Attachment;
message.Attachments.Add(data);
client.Send(message);
Any ideas on what is happening here and how to make these PDF's visible to smart phones?
Thanks.
Dan

Hi Dan,
What happens if you export from Crystal Reports designer?
I just tried if and BlackBerry tells me I am about to download a file that cannot be viewed on the phone. It doesn't say why though.
Going through the Platforms file it doesn't mention smart phones so it would indicate we don't support them in that format.
HTML worked but not pretty. You'll have to see what Blackberry does support. I found this one kbase article from them:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11245&sliceId=SAL_Public&dialogID=206744335&stateId=1%200%20206742756
I'm testing more but I believe this is a blackberry limit and not CR.
Seems they do support it but very limited.
Thank you
Don

Unable to install Crystal Reports 2008 SP07

Similar Messages

Maybe you are looking for