Unable to install Darwin Streaming Server on Windows2000 Professional PC.

Is Darwin Streaming Server supposed to work on a Windows2000 professional PC ? I'm having problems with it.
Thanks,

Hi sdhandu,
first of all: WELCOME TO THE DISCUSSIONS!
As far as I understand this article you cannot use it on a Windows2000 PC: Darwin/QuickTime Streaming Server 3: System Requirements

Similar Messages

  • Problem in installing Netscape Messaging Server in Windows2000 Professional

    I have installed NMS 4.15 on Win 2K Professional.Setup completed successfully.When I logged in Console I can able to see only Administration server and Directory Server,but Messaging Server is not listed. When I tried to uninstall,it shows the Messaging Suite also in the Uninstall list. I can't access NMS thru browser also.
    Anybody's help would be appreciated.
    Thanks in Advance.
    Selva

    NMS 4.15 is not supported on Windows 2000 prof edition. later i got the solution from NMS release notes.

  • How do I install Quicktime Streaming Server?

    How do I install Quicktime Streaming Server?
    Thanks
    Mac mini G4   Mac OS X (10.4.6)  

    The Apple-supported QuickTime Streaming Server only comes with Mac OS X Server. What you need it QTSS's open-source twin Darwin Streaming Server. Download that, open the disk image, and just double-click on the package file to install.

  • Darwin streaming server

    I can't find a discussion area dedicated to Quicktime or Darwin Streaming Server technologies, so since I am working on a MacBook Pro I'll put my initial question here... if anyone wants to direct me to a more appropriate forum, please do!
    The problem: I have gone through the Darwin Streaming Server installation process (using Apple's provided installer for v5.5.5) and no errors were reported until the server setup part (via Safari). At that point I was informed that the server had not started as it should have, as part of the installation. I have tried manually launching the QuicktimeStreamingServer executable from Terminal, but it gives me the error "Bad executable (or shared library)".
    Any help welcome!
    Thanks...

    Hi Matt,
    I spent a few hours troubleshooting this since I got the same error message. Giving up, I decided to download an earlier version:
    http://www.opensource.apple.com/projects/streaming/release/DarwinStreamingSrvr5. 5-OSX.dmg
    Version 5.5 was able to install correctly and immediately took me to the Darwin Streaming Server Admin url.
    I'm using 10.5.1 on a power pc [intel dual core]

  • Darwin Streaming Server & Quicktime Broadcaster Problems

    recently upgraded to Darwin Streaming Server 5.5, and am having difficulty with it. I keep getting the following error when I try to change the settings under the Broadcaster sidebar menu item.
    Error - Perl execution failed
    Can't call method "state" on an undefined value at /Library/QuickTimeStreaming/AdminHtml/parse_xml.cgi line 1365.
    The line that this error references is:
    if (($broadcasterConn->state = 0) && ($theAction eq 'SaveBroadcasterSettings')) {
    Additionally, If I select "Broadcast" in QuickTimeBroadcaster, I am presented with this error:
    Connection Failed (-5420)
    I have not experienced these errors with the previous version, which I uninstalled. When I reinstalled DSS I received a "Successfully Install" Message.
    And...for what its worth, this is the version of perl I am using:
    This is perl, v5.8.6 built for darwin-thread-multi-2level
    Any help is greatly appreciated.
    Thank you.

    We use 10.3.9 server here on three different machines. Two of the three disconnect from Broadcaster after about half an hour, with the -3285. The third system will not even allow a connection to start, ever. I am thinking that the automatic unicast file has a permissions issue. All of the three servers have Open Directory enabled. I want to turn it off, but I am not sure what will happen to the rest of the server's abilities if I do. Does anyone run in an Open Directory disabled configuration?

  • Uninstalling  Darwin Streaming Server

    Hello Experts,
    Quick question, How to completly uninstall the  Darwin Streaming Server from Mountain Lion ?
    Thanks for your time.

    No uninstaller or instructions; wonderful
    I would broadly follow How To Uninstall Darwin Streaming Server 5.5.3 on Mac OS X
    in conjunction with a list of files for the current version (if that's what you have), obtained by pointing Pacifist at the install pkg. I advise against using Terminal to remove the files.
    Backup first, in case of problems.

  • Broadcaster, Darwin Streaming Server, IP problem?

    I'm pretty sure this is a DNS issue. Hopefully someone has some simple advice out there.
    I'm using an MacBookPro, Broadcaster and Darwin Streaming Server.
    Attempting to create a .mov file that will deliver a live stream.
    1) I created a new QT player and assigned the movie rtsp://192.168.0.105/myteststream
    2) Then I saved the movie as whatever.mov
    3) I then uploaded whatever.mov to a remote server.
    Now if I call on this file from my local network "http://www.mydomain/whatever.mov" (using any comp here - Mac, PC) I can view the streaming movie with no problem.
    However, anyone else is unable to view it. They get a broken QT error. (10060)
    I'm thinking that the "192.168.0.105" IP is incorrect. (local?)

    I'm thinking that the "192.168.0.105" IP is incorrect. (local?)
    That is a local IP address, and it will only work for someone within your network. To find the correct IP address, go to this page from any computer on the LAN and note down what it reports.
    You may also need to open ports used by RTSP on the firewall if you have one, and configure port forwarding on the router so that those ports are forwarded to the local IP of the computer hosting the stream.
    (15006)

  • Windows 2003 & Darwin Streaming Server

    Hello all. I am trying to install the Darwin Streaming Server on one of my Server 2003 systems. However, it hangs at Adding userName during the intall when I use ActivePerl 5.8.0-5.8.6. If I use 5.8.7 it will get past that part but says that I need to install ActivePerl 5.8.0 or better to do the streamingadminserver.pl part of the install. It would seem to me that 5.8.7 is greater than 5.8.0 so why is it asking to do that? I verified that the perl interpreter was in the PATH like the manual says to do but is there something else that I'm missing here?
      Windows XP  

    Yes you can intall DSS on a TIger machine, this is what I have done however I haven't really tested it out yet

  • JMF and the Darwin Streaming Server

    Has anyone been successful in getting the JMF JMStudio to work with
    the Darwin Streaming Server? I have set up Darwin on my computer and
    encoded a sample .mov file using a codec that is supposed to be
    compatible with JMF, the H.263. I was able to view this file inside
    JMStudio if I opened it directly as a file. I was also able to stream
    this file via the server using the Quicktime movie player by opening
    URL to rtsp://localhost/test.mov
    However, when I go into JMStudio's Open URL, and put in
    rtsp://localhost/test.mov, I get an error message saying:
    Controller Error:
    Failed to realize: Server is not responding.
    I am using JMF Version 2.1.1e and the Apple Darwin Streaming Server
    5.0
    If anyone has any suggestions, please let me know. Also, let me know
    if there is another streaming server, preferably open source, that
    works well with JMF.
    thanks.

    your doing local host, JMF needs to receive rtp on
    port XXXX, now if you are receivng on port XXXX the
    server maybe trying to send on the same port , or
    maybe it's trying to send the RTCP data.
    Does darwin use RTCP ?? and also I would try from
    second computer , as JMF sends, receives on same port.I am pretty sure all the ports are set up correctly. I have tried connecting from another computer and run into the same issues. Also, I was able to view the movie just fine from the same computer (connecting to itself) using the Quicktime Java package provided by Apple. I've been able to view movies in quicktime using the RTSP protocol

  • Darwin Streaming Server on Tiger Desktop?

    Is it possible to run Darwin Streaming Server on Tiger desktop. I don't have the 10.4 server. I make a lot of FCP videos and need to use DSS for testing.
    I dowloaded the binary from ADC. That site says it only runs on the server, Linux, BSD or Intel.
    Alternatively could I compile the source for 10.4 Desktop with XTools?
    Thanks

    Yes you can intall DSS on a TIger machine, this is what I have done however I haven't really tested it out yet

  • Quicktime Broadcaster 1.5 and Darwin Streaming Server 5.5

    Since i upgraded to Quicktime Broadcaster 1.5 (as i want to use H264) i can't use any more the Automatic Unicast (Announce). It says 'Broadcast error disconnected (-3285). I updated to Darwin Streaming Server 5.5 (on SuSE 9.1 Linux on a hired server with 2 IP's, one binded to DSS, the other to Apache to enable Streamin over port 80) but it doesn't help. I tried with Wirecast instead and everything workes fine (at least it created the .sdp file correctly) so i don't think the problem is in the Streaming Server Set up. Anyone has experienced something similar with the new Broadcaster?

    We use 10.3.9 server here on three different machines. Two of the three disconnect from Broadcaster after about half an hour, with the -3285. The third system will not even allow a connection to start, ever. I am thinking that the automatic unicast file has a permissions issue. All of the three servers have Open Directory enabled. I want to turn it off, but I am not sure what will happen to the rest of the server's abilities if I do. Does anyone run in an Open Directory disabled configuration?

  • How to convert JPEG Files into Streams for Darwin Streaming Server?

    Hi!
    Is there any possibility to convert JPEG Files locatet in a Folder into a Videostream for the Darwin Streaming Server, like Quicktime Broadcaster does with my iSight Video??? I know I can convert JPEGs into Movies using QuickTime Pro, but that is not exactly what I am seraching for: I have a folder, where some kind of Webcam writes about 5 JPEG pictures per second. Now I would like to have these pictures in converted into a videostream in realtime. QuickTime Broadcaster would be the weapon of choice if it would accept JPEG Files as input...
    Is there any posibility to solve this problem??
    CU Jan

    Hello Karthik,
    I just tried to solve my problem with your suggestions, unfortunately, my JSP channel still doesn't work :(
    The portal server keeps reporting "Server Error..." when I tried to add query at the end of the href.
    Do you still have any other suggestions?
    Thank you

  • Unable to install the backup server using srvbuildres

    I am unable to install the backup server with resource file
    it gives weiored message which i didnot come across till now.
    Open Server Error: 16400.10.0: srv__e3_create_encrypt3_context: Unexpected failure in comn_keypair_create.
    Open Server Error: 16400.10.0: srv__e3_handshake: Unexpected failure in srv__init_encrypt3.
    Open Server Error: 16400.10.0: srv__handle_password_negotiation: Unexpected failure in srv__e3_handshake.
    Open Server Error: 16400.10.0: srv__e3_create_encrypt3_context: Unexpected failure in comn_keypair_create.
    Open Server Error: 16400.10.0: srv__e3_handshake: Unexpected failure in srv__init_encrypt3.
    Open Server Error: 16400.10.0: srv__handle_password_negotiation: Unexpected failure in srv__e3_handshake.
    this is all in the backuplog and it fails saying unable to boot the server and task failed and backup server not started.
    i see that the password encryption is not on i got that by running sp_helpserver <backupsever name>
    the staus i got when i ran sp_helpserver is "timeouts, no net password encryption, writable , enable login redirection"
    Please help me installing my backupserver.
    many thanks in advance.

    Please confirm that you're getting this error message while trying to CREATE the backupserver.
    The reason I ask is because you mention seeing these messages in the backupserver errorlog, but you wouldn't be getting any messages in the backupserver errorlog unless you were able to successfully install a backupserver.
    Also, what is your dataserver/backupserver version strings? (dataserver -v , backupserver -v)
    A quick google search turns up Note 1963584:Open Server Error 16400 in ASE Backup Server log when dumping a database. [References SAP note 1963584.]
    - same errors as you're seeing, but errors generated while attempting to perform a dump command (ie, backupserver has been installed and is up and running)
    - appears to be an issue when "net password encryption" is enabled/true for SYB_BACKUP; if you have net password encryption enabled ... what happens if you disable it?

  • Darwin Streaming Server Files Help

    I purchased a Lynux server to stream movies of well, lots of stuff, and I downloaded the darwin Streaming Server Files. I did a mass upload FTTP and well seems relayconfig.xml is a sample??? What all do I have to change in this, and do I need one for every movie? do i change the title of the file for each movie? like relayconfig1.xml, relayconfig2.exm ect?
    ANY help yould be greatly appreciated

    The mount point is supposed to be the location on the hard disk where the movie file resides; the sdp extension indicates that the file is a stream. To create a SDP file, try using the information linked to from this page.
    (14906)

  • H.264 Settings for Darwin Streaming Server

    I would like to encode H.264 for unicast streaming delivery off of the Darwin platform. We've done a lot of testing and the .mov encodes that we've been putting out at 768kbps (hinted for streaming) have been serving quite slow and choppy off of anything other than a T1 connection.
    I've seen some H.264 .mp4 encodes at 350kbps that look incredible streaming but we cannot duplicate this size and quality for some reason with our own video.
    At 480x270, or something around those dimensions, I was wondering what the best bit rate and format would be for streaming delivery off of the Darwin platform?
    For Darwin we are running 5.5.5 and we are using Compressor 3.0.1. All testing is being done with Quicktime 7.2 on Mac Pro machines over various types of connections.
    Thanks,
    Mike

    After looking through the apple manual I found this:
    Resetting the Streaming Server Admin User Name and Password
    If you forget the Streaming Server Admin user name and password, you can reset them.
    To reset the user name and password:
    1 Log in to the server computer as root, open a terminal, and type the following:
    qtpasswd someUserName
    where someUserName is a name of your choice.
    2 Follow the prompts by entering the administrator user name and a password you want to
    assign to the user someUserName.
    3 Using a text editor, modify the /Library/QuickTimeStreaming/Config/qtgroups file.
    For Windows, modify the c:\Program Files\Darwin Streaming Server\qtgroups file. For other
    supported platforms, modify the /etc/streaming/qtgroups file. Modify the file so that the user
    name you just created or modified is included in the group Admin, as follows:
    admin: someUserName
    4 Save the file as ordinary text (not .rtf or any other file format).

Maybe you are looking for