Unable to install downloaded additional content in Windows 8

I am trying to install additional content for Premiere Elements 10 running Windows 8.  I downloaded the additional content and when I extract the file, the Installwizard pops up and says; the installwizard will allow you to 'remove' Premiere Elements 10 Content from your computer. The only option is to click 'next or 'cancel'.  If I click next, it says you have chosen to remove the program and the only option given is 'remove', 'back', or 'cancel'. How do I install it?

Hi Robert,
Is Windows 8 on a Surface Tablet or desktop/laptop?
If Tablet, this platform is not supported.  No ETA on when a version will be released to support this.
If desktop/laptop, then you need to update your video driver by visiting the website of the manufacturer, i.e. Intel, nVidia, ATI, etc. The latest video driver cannot be obtained by using the Microsoft update tool.  These drivers are usually generic and/or not the latest.
Once installed, this error should go away. 
If installed and you still get the error, then this means your video card is unsupported and you will not be able to use this software.
Jason

Similar Messages

  • How do I install the additional content file (PRE7_Cont_WWEFGJ) that I downloaded with Premiere Elements?

    Additional content for Premiere Elements 7 can be found by following the link in the article linked to at the end of this FAQ.
    You'll need to log in to your Adobe account, and then you'll see the link to the download on the same page as the Free Trial download.
    John Venediger received this from Tech Support, based on his problem installing additional content (including templates and themes):
    When trying to install/open the contents file (PRE7_Cont_WWEFGJ) you get this message - The setup has detected that premiere elements is currently in use. Please close Premiere Elements, then launch setup again despite the fact that Premiere Elements is not in use.
    To resolve this issue, please perform the following steps:
    1. Right-click the Microsoft® Windows XP® taskbar and select Task
    Manager.
    2. Under the Applications tab of the Task Manager, please ensure Adobe
    Premiere Elements or Photoshop Elements is not running in the background.
    3. If Adobe Premiere Elements or PhotoShop Elements is running in the background, please
    select the application and press End Task.
    4. Next, switch to the Processes tab and look for a process named Adobe
    Premiere Elements.exe. and Photoshop ElementsEditor.exe.
    5. If Adobe Premiere Elements.exe or Photoshop ElementsEditor.exe. is running, please select the process and press End Process.
    If you are still unable to install the additional content, please refer
    to our knowledge base document kb404997. Perform step 8 and try the
    installation again. Continue to step 7 if necessary. To access the
    document, simply copy the following and paste it in the address bar of
    your web browser:
    http://www.adobe.com/cfusion/tdrc/index.cfm?loc=en_us&product=premiere_elements

    Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

  • Downloading additional content appears successful, but nothing has actually installed

    I have been trying to download all the additional content for Logic for the past week. Initially, I began downloading everything together. This resulted in windows popping up saying 'download not successful' or 'unable to complete download'. Subsequently, I started downloading the packages a few at a time and this seemed to work perfectly. Although it took a long time, the download completed, and upon entering my password, began installing the new content. However, none of the new content has been updated in my Logic library. It simply cannot be found.
    This is extremely frustrating. I need Logic for my work and changed to this software after hearing so many good things about the product. Downloading additional content should not be this difficult.
    Any help would be greatly appreciated.
    Thanks a mill

    Erik,
    I think it refers to...  if you move the Logic Pro App to a different drive... after install.. as I found out last week with one of my clients... who couldn't find the additional content after install.
    I don't believe you can actually install Logic from the App Store, to a different drive other that the system drive.. But you can move it.. after install..and run it.. but with all the various issues including updating incorrectly etc.. that doing that can cause!

  • Problems Installing Mountain Lion (Can't Download Additional Content)

    I have tried to install Mountain Lion like 5 time and I always get a Message saying that "Can't Download Additional Content" and I cant get pass throught it. What Can I do to install it.
    I have deleted my Hard Drive like 5 times for the process.

    Just click loops , on the top of the panel click loops, and select "reindex all loops".
    http://support.apple.com/kb/HT5894

  • 3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(

    3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(

    aerol wrote:
    Are you trying to install all the content options at the same time?  If so, have you tried to install them one at a time?
    Yep.... this worked fine for me
    CCT

  • Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to store update?

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

  • I am having trouble downloading additional content.

    I am having trouble downloading additional content.I t gets about 1/4 the way complete then freezes and says that it can't download the content and to check the internet connection. Checked internet connection numerous times with other devices as well as with the provder and there is nothing wrong with the connection. I have even tried streaming music at the same time I try to download the content and it still disconnects while the streaming has no problem.
    Any Help?

    ... doublechecking to see if I'm reading your tags right, Sexy ... are you getting an error 2 when you go to launch iTunes after the install?
    If so, is it saying that Apple Application Support cannot be found?
    What Windows OS are you using? XP, Vista or 7?

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Unable to install C4500 HP printer on Windows 7

    unable to install C4500 HP printer on Windows 7 - printer installation disc only supported by xp and vista.  What do I need to do??
    This question was solved.
    View Solution.

    Hi,
    You may download the Windows7 compatible software below:
    http://ftp.hp.com/pub/softlib/software11/COL30130/mp-74912-1/PS_AIO_04_C4500_USW_Full_Win_WW_130_140...
    Make sure the USB cable is unplug before performing the installation.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I Download Additional Content

    Hi...I've got a MacBook Pro running OS X Mountain Lion fully patched and updated. I'm not usually a Mac user but I'm fairly comfortable with it when I do...I know enough to be a Power User. I purchased/downloaded Mainstage 3 today. It prompted me after the install to Download Additional Content but I had to restart due to some other updates I was running so I just figured I'd be able to do it when I was finished with the restart.
    Now, when Mainstage is open, I go to the MainStage 3 menu and the option for Download Additional Content is grayed out. Why is that. What am I missing. I figure I'm just missing something easy. I've perused the various support forums and manuals and haven't figured out why. Can someone point me in the right direction?

    I would recomend removing (Deleting) Mainstage and re-install from the App store, keep in mind the initial install is about 2-3 GB download, and then the additional content is about 30 GB.  
    To remove a Mac App Store app that appears in Launchpad
    Follow these steps while you are logged in with an administrator account:
    Enter Launchpad.
    Click and hold on an icon until you see all icons jiggle.
    Click the "x" button in the upper-left of the Mac App Store app icon you want to delete.
    Note: If you do not see an "x" button, either the app is not from the Mac App Store or you are logged in as a standard user.
    Click "Delete" in the confirmation dialog to delete the app.
    Tip: If you want to reinstall a deleted app, open Mac App Store, click the Purchases icon, then click on the "Install" button for the app.

  • "Download Additional Content" Does Nothing?

    I've been using a trial of FCPX for a while and today I went ahead and purchased it from the App Store.
    One of the first things I did was go to the FCPX menu and choose "Download Additional Content," but all this does is take me to the Updates section of the App Store where I am informed that there are no updates.
    What's going on here? Do I already have the additional content just by installing FCPX? If so, how can I verify that I have the additional content?
    Thanks in advance for your help.

    For anyone who has this problem in the future: just wait, and the update will eventually show up in the Updates section of the App Store. I had installed FCPX to my MacBook Air to see if I could get the "Download Additional Content" to work there, but it didn't. However, this morning (almost 24 hours later), I have a notification in the App Store that the Supplemental Content 1.0 update is ready to install. Lesson learned.

  • Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

    Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

    Thanks rhoydotp,
    The download was actually the successful part!  I had no issues with it timing out or anything.  My problem was the actual install, after the download was complete.  The installer just stopped about a quarter of the way up on "Alternative Kits" and never made it to any of the other kits.  I think I'll try installing them one at a time like you said, and see what happens.  Hopefully it works!
    -marth3

  • Downloading additional content on OS X 10.10

    Hi,
    I'm experiencing a strange situation with Logic Pro X 10.0.7 on OS X 10.10 regarding additional content.
    I'm quite sure that I have selected everything in the "Download addition content" when I started my download and I think this screenshot confirm my theory:
    As you can see if I presse "Select All Uninstalled" button nothing is selected, so it seems that everything is already downloaded and installed, but as I click on one of this content the button "Install" turn enabled and if I click it would start downloading it!
    Moreover if I open some song I get a warning that there are contents that are missing and have to be downloaded. For example "Standby House Beat" loop and "Euro Basic Beat" loop are missing (I know since I got in one of my songs).
    Are you experiencing the same problem?
    Thank you.

    I've tried to reindexing the loops as you suggest, but I still missing some loops! So for example when I open my song the loop "Euro Basic Beat 4" is missing while "Euro Basic Beat 2" is available.
    I don't how to solve and I would like to avoid downloading everything again!!!
    All loops and instruments seem to be downloaded now:
    So what can I do?
    Thank you.

  • Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

    HI,
    I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
    Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
    Setup is unable to proceed due to the following error(s):
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Regards
    Anil Kumar

    You really need to do what error is suggesting.
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Nosh Mernacaj, Identity Management Specialist

  • Unable to Install Crystal Reports 2008 on Windows 7 64 bit

    Hi,
       I am unable to install Crystal Reports 2008 on Windows 7 64 bit laptop. Is this not supported?
    BR, Nanda Kishore

    i INSTALLED NOW

Maybe you are looking for

  • Billed for Premium Tech Support That Did Not Fix the Problem

    i too was scammed last night by a premiun tech support rep...he assured me that the problem i was having with my pc could be repaired and pursuaded   me to purchase the 10 month plan for $14.00 month also said if i canceled prior to the 10 mos i woul

  • Can't get CD tray to work

    I can get the CD to open, but I can't get the keyboard to work. I'm using an extended apple keyboard, and the eject button isn't working... This is on a G4 Mirror. Very, very frustrating Thanks Eric

  • How to lock the position of text in XML RTF

    Hi Experts, I am working in XML Publisher reports. I am working on invoice report, i have following issue. RTF: <?for-each:headergroup?> --header <?header-data1?> <?header-data2?> --inside table <?for-each:linegroup?> --lines <?line-data1?> <?line_da

  • IFs classes into Database

    I try to use this clases into my own class import oracle.ifs.adk.user.UserManager; import oracle.ifs.common.AttributeValue; import oracle.ifs.beans.DirectoryUser; import oracle.ifs.common.IfsException; import java.util.Hashtable; After that i try to

  • Prototype DMS project

    We are haveing a prototype project with the DMS module. What is the safest and easiest way to run this type of project?