Unable to install driver for HP x2301 in Windows 7

I get access is denied and after that "An error occurred while installing the display drivers"

Have you tried RMB - 'Run as administrator'?
Btw. any particular reason to install the driver?
A monitor driver is a nice gimmick, but most times not really needed.
*** Say 'Thanks' with Kudos ***

Similar Messages

  • Unable to install itunes for new computer with windows 8

    unable to install itunes for new computer with windows 8
    states this app unable to run on this PC

    Hello jgrn76,
    It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    If issues persist when trying to install it, I would try running through the steps in the article named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Otherwise, would you mind elaborating a bit on what the error message says, word for word?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

    Greetings to all!
    Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
    Would be glad to realize how to solve this... Thanks a lot.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.
    Message was edited by: Airtoground

    I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
    Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
    Contents and Installation order
    for Windows VISTA
    Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
    - SLP Module OEMSLP2.0
    - Sun Java 2 Runtime Environment v1.6.0
    1 KB928190(For updated USBHub.sys) KB928190
    2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
    3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
    4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
    *5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
    I found this driver but it says "no suitable driver found, installation wizard stops its work".
    Any ideas what could it mean?
    Thanks to all.

  • TS1538 i receive an error code 10 ( the device cannot be started ) when i try to manually install driver for iphone 4s in windows 7

    Hi folks,
    Can somebody enlighten me on manually downloading the driver for iphone 4s on my windows 7?
    i tried reinstalling it several times as instructed in the artcle http://support.apple.com/kb/TS1538 but all i receive is an error code 10 saying that the hardware couldn't be started.
    Thanks in advance for helping me out

    Are you saying that you are running iTunes 10.7 now and it is still telling you to update iTunes?

  • Unable to install driver for GTX 650 Ti on HP Pavilion p7-1187c

    Greetings,
    I have an HP Pavilion p7-1187c with integrated graphics (DX 10.1) on a IPISB-CU (Carmel 2) motherboard. I upgraded the power supply to a Corsair 550 (no problem) and then installed a Gigabyte GEFORCE GTX 650 ti graphics card. THe card is getting power judging by the fact the fan is spinning.
    When I attemped to install the driver from the CD supplied by Gigabyte, I immediately get the message: This graphics driver could not find compatible graphics hardware so was not able to install." I'm a computer novice so this message means nothing to me. Any help as to what the next step should be would be greatly appreciated. Is it possible that my motherboard simply will not allow for a separate graphics card?
    I needed to upgrade the graphics card to be able to run X-Plane 10.
    Thanks again for any help.
    Leon
    This question was solved.
    View Solution.

    Hi Leon,
    The NVIDIA 650 TI requires auxillary power via the PCI-E 6 pin power connector to fully power up.  If the card doesn't fully power up then the bios is not going to see the card and therefore the operating system will not see the card.
    The 650 TI card is 110+ watts and the without the PCI-E 6 pin power connector there is not going to be sufficient power from the PCI-E slot to power up the card.  See the below image for the location to attached the PCI-E 6 pin power connector.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Runtime error installing driver for photosmart C6380 on Windows 7 Professional 64-bit machine

    I have an HP Photosmart C6380 All-in-one printer networked to home network and connected to a laptop (hardwire) with Windows 7 Professional 64-bit operating system.
    Downloaded driver from HP site and receive message:
    Runtime Error
    Program:c:\USERS\.....\AppData\Local\Temp\7xS374E\SETUP.exe
    Any suggestions?
    I can print, but cannot use other all-in-one functions

    Hi HW65,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that you are getting errors when attempting to install the HP Software and Drivers for your printer.
    Please remove any cables that you have connected to the printer with the exception of the power cable. Please make sure you have the power cable connected direct to a wall outlet and NOT a power bar/strip. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.  Note that the printer in the document is a LaserJet printer and this is only used as an example and that the document is meant for HP products in general.
    Please remove the Printer from the computer with the use of the uninstall utility that can be located in the All Programs menu in the HP folder under the model of your printer.
    Please click on the following link to download and install the printers HP Photosmart C6300/6324 All-in-One Printer series Full Feature Software and Driver. Please save the file to your desktop so that it creates it's own Icon.
    Once the download is complete, double click the Icon and follow the instructions. Please do NOT connect any cables to the printer until the installation prompts you to do so.
    If you have any other questions  or any concerns, please feel free to write me back.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Unable to find driver for realtek sound card

    hi iam having HP Pavilion Media Center a1320in Desktop PC.. iam unable to install driver for my sound card.i got driver from hp website but while installing a msg gets popup. it says install Microsoft uaa bus driver for hd audio. even in device manager-system devices i cant find MS UAA hd audio. 1 unknown device its shows in device manager. bcoz of that i purshased a new sound card. help me pls.... os - windows xp pro sp3.

    hi paul . i just installed the above two softs. but nothing happend. kb888111 is for xp sp2. so it will not get installed in sp3. bt i made small changes in registry and installed it. even i installed 2nd soft realted audio also, u can find my comp specification over here http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00590356&tmp_task=prodinfoCategory&lc=en&dlc=en​...〈=en&product=1823355 iam using xp sp3. in my device manager-system devices- i cant find microsoft UAA....... and i think thats the problem. every time i install driver for realtek audio(got from hp website), it ask me to install MS UAA bus driver. what to do now..

  • Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

    Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

    Did you try more than once? If so:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Leopard install fails with panic: "Unable to find driver for this platform"

    I have an early 2006 20" iMac with OSX 10.4.11 installed. Running perfectly with latest Firmware, permissions repaired, just perfect. I now want to upgrade to OSX 10.5, so I insert the Leopard Install DVD, reboot, and then to my horror a kernel panic, screen goes black with message panic(CPU 0 ...): "Unable to find driver for this platform", with the usual boxed message about holding the start button.
    Grateful for any help.

    I finally managed to install Leopard by using a 2nd iMac to read the install DVD, and using firewire and Target Mode as described in http://reviews.cnet.com/8301-13727_7-10327225-263.html?tag=mfiredir . This seems to imply that the kernel panic is due to some hardware fault with my iMac's optical drive.

  • I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed.  Error message: Panic CPU  0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platfor

    I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed.  It instructed me to hold power button to shut off and then press again to restart.  Same error message keeps coming up and computer won't boot to home screen.
    Error message:
    Panic CPU  0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
    \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
    Debugger called panic
    Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
    THANKS FOR ANY HELP.
    ROBB

    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
    When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    Don't install the Thunderbolt update -- it's defective.

  • My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

    My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
    When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    Don't install the Thunderbolt update -- it's defective.

  • Kernel Panic: Unable to find driver for this platform

    So, my 1 GM RM, 1.5 GHz Powerbook G4 (15 inches) has been behaving wonderfully lately. Until, this morning, it locked up -- as it sometimes does -- after inserting a 3rd party SATA card and waking it from sleep.
    This is normally not a problem. A reboot gets things back on track. Not today. The reboot stayed on the grey screen with the white apple logo. I tried booting off of a Disk Warrior CD and an OS X 10.4 install DVD. I go this kernel panic:
    Unable to find driver for this platform: "PowerBook5,6".
    But...and here's the best part...if I boot into target disk mode and hook the computer up to another similar Powerbook we have, the similar PowerBook boots fine using my drive.
    So, it seems to be a hardware problem with my PowerBook. Any ideas on how I narrow it down?
    Thanks,
    Gary

    Glad you found your problem. Our kernel panic on our 15" G4 is a bad logic board. $500+ to fix it. Just found out yesterday.
    JWTech

  • Power book not loading (error: unable to find driver for this platform) help me please

    power book not loading (error: unable to find driver for this platform) help

    That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
    You post is a little cryptic, however. We may be of further help if you can tell us:
    <> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
    <> what program and its version your were trying to run and/or install.

  • Unable to find driver for platform: ACPI

    I'm getting this error message: 'panic(cpu 0 caller OX0039C213): Unable to find driver for this platform "ACPI", overlaid on the kernel panic screen at startup.
    I can't reboot into safe mode. In single user mode and verbose mode, the same error message appears and I can't type anything after it does.
    This happened after I HAD a kernel panel, booted into safe mode, uninstalled recently installed applications (norton antivirus and stuffit) and deleted items from library/startupitems.
    i then restarted to see if it would work normally, but now i can't even boot into safe mode.
    i'm posting all of this from the windows partition of my macbook, which works fine.
    HELP! my macbook is (sigh) not even 2 months old.

    Hopefully someone else can be more helpful than I. "ACPI" is Windows technology. So the problem is in your installation of Windows (maybe the Mac foundation for it, I don't know).
    i'm posting all of this from the windows partition of
    my macbook, which works fine.
    HELP! my macbook is (sigh) not even 2 months old.
    This is almost certainly a software problem, and in the worst case, you can fix it by starting over with a clean install of OS X.

  • Update 10.3.9 to 10.4.6- "Unable to find driver for this platform Powerbook

    I am trying to update 10.3.9 to 10.4.6 and when I insert install disc and hold down "c" the screen starts with the apple, then turns grey and says kernel panic or somthing like that, shows multiple languages saying to restart the computer as well as this statement:
    Unable to find driver for this platform Powerbook 4,3"
    I have a 12.1" iBook, 900 MHz PowerPC G3, 384 MB SDRAM
    Is it possible to update from 10.3.9 to 10.4.6? How do I install it?
    Thank you for any help!!!

    Hi Sig! Unfortunaly I dont have a solution with tiger maybe I will try to install the Leopard. What do you this about? Thx!

Maybe you are looking for