Unable to install Essentials Role on Windows Server Technical Preview (VHD)?

Hi
Having a problem trying to install Essentials Role on Windows Server Technical Preview (VHD)
After reboots, AD installs, I get Configuration encountered some issues in Results wizard.
Updating an preparing your server... 68% completed then it fails with following error.
"An error occurred while configuring Windows Server Essentials. Please try again."
Trying again same error.
Anyone able to get this installed?
TIA

Hi,
I did the same test without any problem.
You could try it again to check the result.
If it does not help, please refer to this kb article:
http://support.microsoft.com/kb/2914651
Regards.
Vivian Wang

Similar Messages

  • Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

    I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
    It verifies the connection and then throws the error:
    The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
    WSUS Server : Windows Server 2012 R2
    Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
    Please let me know if anyone has experienced this issue.

    We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
    It verifies the connection and then throws the error:
    The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
    Same error even after rebooting the server multiple times.
    WSUS Server : Windows Server Standard2012 R2
    Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
    Event ID 7000:
    The Windows Internal Database service failed to start due to the following error:
    The service did not start due to a logon failure.
    Event ID 7041
    The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
    Logon failure: the user has not been granted the requested logon type at this computer.
    Service: MSSQL$MICROSOFT##WID
    Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
    This service account does not have the required user right "Log on as a service."
    User Action
    Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
    right is assigned to the Cluster service account on all nodes in the cluster.
    If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
    with this node might be removing the right.
    I found following article:
    "MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
    http://support.microsoft.com/kb/2832204/en-us
    To work around the issue, use one of the following methods:
    Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
    Exclude the computer from the GPO that defines the user right.
    We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
    Regards
    PR

  • Windows Server Technical Preview - RDS - RemoteFX 3D

    Hi Windows Server Team,
    I am having an issue with the Windows Server Tech Preview and Remotefx 3D. I installed the RDS role and have it all configured with no problems. I loaded a VM of Windows 10 Enterprise Tech Preview. It works fine, however when I activate the RemoteFX 3D on
    that virtual machine. It then just shows a black screen in my Hyper-V Manager and just stays hung on the black screen. I have been working with RDS and RemoteFX 3D since the Windows 2008 R2 days and have never had this problem at all. When I try to Shut down
    the VM it stays hung when I try to Turn Off the VM it stays hung. I am forced to reboot the server and when it comes back up it still just shows a Black screen for the Windows 10 Enterprise VM with RemoteFX 3D turned on. I really wanted and was interested
    in testing the new OpenGL features and other ehancements that have been mentioned with this version of RDS and remotefx 3d. I also noticed that Gen 2 VM's now also support the RemoteFX 3D features and even tried to create a Windows 10 Enterprise as a
    Gen 2 VM but I have the same problem. My server is a Dell PowerEdge R720. Thanks and I look forward to your reply and can hopefully get this working.
    Regards,
    Robi Rodriguez

    Hi,
    Thank you for posting in Windows Server Forum.
    Initially we need to check whether the device is supported for latest version of features available. To use new feature available with Windows Serer Technical Preview we need to see that device supports the latest available OS. Please go through
    this article for information. You can contact Dell for further information whether it
    still have any updates for Windows Server Technical Preview.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • VGPU with Nvidia GRID and Hyper-V in a future Version of Windows Server Technical Preview possible?

    Hi Windows-Server Team!
    We've got 8 XenServers with NVidia GRID K2 cards in it and using it for our Citrix XenApp/XenDesktops Farms.
    Works very good. But we want to do it with Hyper-V.
    Is there a plan to do vGPU like XenServer with Hyper-V too?
    Thanks
    Thomas

    Hi Thomas,
    Windows Server Technical Preview adds support for OpenGL 1-4.4 and OpenCL 1.1.  You will need Windows 10 Enterprise Technical Preview for the guest VM and Server Technical Preview with Hyper-V installed on the physical host.
    What's New in Remote Desktop Services for the next version of Windows Server?
    http://blogs.msdn.com/b/rds/archive/2014/10/07/what-s-new-in-remote-desktop-services-for-the-next-version-of-windows-server.aspx
    -TP

  • Installing administrative tools for Windows 10 Technical Preview for Enterprise

    At first I was upgrade my Windows 8.1 to Windows 10 Technical Preview for Enterprise every things done will then
    I try to install administrative tools for windows 10 technical preview for enterprise I found the .msu file from Microsoft website but when I tried to install it, it gives me the following error:
    Windows Update Standalone Installer
    installer encountered and error: 0x8024001d
    is there anyone to help me regarding above issue.
    Thanks
    Zelgay Kunari

    Hi zelgay,
    This is my result:
    From your error code, it seems this is relate to your windows update, please use following command to fix corrupted files:
    DISM.exe /Online /Cleanup-image /Restorehealth
    In the meantime, you can delete temporary update files in the SoftwareDistribution folder:
    Stop Windows Update service.
    Open File Explorer.
    Double-click the local hard disk where Windows is installed, typically drive C.
    Double-click the Windows folder, and then double-click the
    SoftwareDistribution folder.
    Double-click the DataStore folder to open it, and then delete all files and folders in the folder.
    Note If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    Click the Back button. In the SoftwareDistribution folder, double-click the
    Download folder to open it, and then delete all files in the folder.
    Restart Windows Update service.
    Alex Zhao
    TechNet Community Support

  • PC Settings application in Windows Server Technical Preview

    The PC Settings app in Windows Server Technical Preview would not start with a message "Immersive control panel did not start". Does anybody else have a similar problem and what might be the cause of it?
    Vladimir Shipitsyn

    I accidentally checked the PC settings app today and surprisingly found it perfectly working. I do not know what caused it to start working since Microsoft did not offer any updates for Windows Server TP in February (maybe it was a matter of an
    earlier update?), however, I was able to set the account picture and the lock screen as well as some other settings. I did not find there though any provision for build updates like in Windows 10 TP, only regular Windows Update menu.
    Vladimir Shipitsyn
    Hello,
    where did you see PC Settings? On my Test machine it is removed complete from the Start Menu and also when using WINDOWS+C where it was possible at the beginning.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview"

    Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview" at
    http://aka.ms/xb9l0w
    Thanks -
    James McIllece

    Hi,
    Thanks for your good sharing.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Notification of expiration of Windows Server Technical Preview

    Today the system gave me notification that the current build would expire on April 15, 2015 and that the computer would start restarting then. Will there be issued an update to the current Windows Server Technical Preview build by then or should the system
    just be deleted at its expiration date?
    Vladimir Shipitsyn

    Hi,
    Thanks for your post.
    The reality is that we haven’t had a new build since the original.
    Maybe an update will be released at some point in the near future that extends the lifespan of the current build (at least the lifespan without shutting down every few hours) beyond 15 April.
    I think we could focus on the MS website if there is any updates.
    http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-technical-preview
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Unable to install SCCM client on Windows Server 2008 R2 - certificate permission error?

    I am trying to comply with corporate policy, which is, have an SCCM agent or client on every Windows device. I have successfully used the provided SCCM installer on other Windows 2008 R2 servers. However for one particular server I cannot get the SCCM agent
    to install successfully. I've searched forums and documentation, but can't find a solution. Part of the problem is the lack of feedback by SCCM on what is wrong. I think I have narrowed down the symptom to the following error messages from the "C:\Windows\CCM\Logs\ClientIDManagerStartup.log":
    [LOG[Certificate [Thumbprint C559304C1598F17641D0732EB9EB787169A25FA7] issued to 'SMS' doesn't have private key or caller doesn't have access to private key.
    [LOG[Failed in GetCertificate(...): 0x87d00281]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="ccmcert.cpp:2122">
    [LOG[CCMCreateAuthHeaders failed (0x8009200b).]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="clientauthutil.cpp:978">
    When I use the Certificates MMC snap in to look at installed certs on this Windows Server 2008 R2 machine, there are plenty of normal and expected certificates there. There is also a branch called SMS with hundreds of entries, I have no idea what that is.
    The above error seems to indicate a permissions issue. What do I do to fix this SCCM install? It seems like a server cert issue, not an SCCM issue, so I'm posting to the Windows Server forums.
    Thanks in advance.
    Thanks

    this maybe helpful...
    http://www.jamesbannanit.com/2011/04/certificate-requirements-for-sccm-2012/
    should be asked in SCCM forum...
    http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagerdeployment
    Best,
    Howtodo

  • Unable to install SAP B1 on Windows server 2008 R2

    Hi
    I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
    Environment is set as following :
    1. SQL SERVER 2008 Installed on Server A
    2. SAP B1 to be installed on Server B
    3 Both servers are in domain
    4.Firewall is off
    5. ODBC Connection is tested Successfully
    6 Port is also seem to be ok.
    But  after Installing server tool, when trying to install the Server , in server type nothing is displayed.
    I also checked the connecting SQL server from the instance .
    Please help  is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
    Thanks & Regards
    RP

    Windows server 2008 R2 is not a supported OS for a lower 2007 version. You need to install a higher version.
    Hi Gordon ,
    It means I have to install SAP 2007 B PL10 afterwards upgrade it to the latest patch level .
    But searching in the forms , i have  seen some bopdy installed the SAP 2007 B PL15 on Windows server 2008 R2.
    Thanks in advance
    Regards
    RP

  • Unable to install Device CALs on Windows Server 2012 after OS Reinstall

    Due to a hardware fault we had to reinstall Windows Server 2012. I have activated the Terminal Services licensing Server but I am unable to install Device CALs that we have purchased.
    The error is as follows:
    "Remote Desktop Services Licensing is unable to process your request. Make sure you provided correct information. If the problem persists, try other methods of activation. Error code is 800"
    I tried contacting technical support over phone - they are also unable to resolve the issue.

    Hi, thanks for response.
    I contacted Clearing House over phone and provided them with all the details regarding authorization
    number(s), license number(s) et al. However they also mentioned that there is some technical error from their "tool" and directed me to Technet Forum.
    I shall try the Hotfix

  • Unable to Install Oracle 12 on Windows Server 2012 R2

    Hello:
    I have attemted several times to install Oracle 12c Release 1 on a Windows 2012 R2 server but it fails during the Net Configuration phase. I've the log file but I am not able to dicern anything of value from it.
    Any help will be appreciated.
    Venki

    user9023421 wrote:
    Srini:
    As per Oracle Database Quick Installation PDF, " Windows Server 2012 x64 - Standard, Datacenter, Essentials, and Foundation editions" is supported.
    venki
    This is for R1, not R2
    Which version are you installing on ? R2 is currently not a certified OS
    HTH
    Srini

  • Getting error while trying to install ADRMS role on Windows Server 2008 R2 SP1.

    Hello,
    I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
    Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
    If write access is required, use ServerManager to get a new reference.    at Microsoft.Web.Administration.Configuration.SetDirty()
    Not sure what is causing this error. Any help to solve it would be appreciated.
    Thanks.
    Jigar Mehta

    Hello,
    I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
    Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
    If write access is required, use ServerManager to get a new reference.    at Microsoft.Web.Administration.Configuration.SetDirty()
    Not sure what is causing this error. Any help to solve it would be appreciated.
    Thanks.
    Jigar Mehta

  • Release Date for Windows Server Technical Preview

    Hi,
    Could someone please tell me which year at least the new Windows Server will be out in? This is so I can plan to update stuff as and when needed.
    Kind Regards,
    Sean

    Windows Server VNext will probably GA in the second 2016 quarter (May, June) but Microsoft did not mention any of that. Aidan Finn thinks that it will be in May too
    HERE
    Maybe in the Microsoft Ignite at Chicago, we will be updated with same dates (4-8 May 2016)
    Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com

  • Windows Server Technical Preview Done Right

    Thank You, thank you, thank you, thank you!  This is how Windows Server 2012/2012 R2 should have been from the start.

    The different reactions are interesting on this.  I pretty much stopped using the Start menu when Vista and 2008 came out.  Yes, I would click the button (or pearl) but then I would immediately start typing and the system would find what I was
    looking for a heck of a lot faster than I could trying to navigate the menu.  So when Windows 8/Windows Server 2012 came along, I never even missed it.  Got used to hitting the Windows key and typing what I'm looking for.  That way I can keep
    my hands on the keyboard.
    But, variety is the spice of life.  Whatever makes you happy, happy, happy.
    . : | : . : | : . tim
    Well, now it allows it to be done both ways and it doesn't bounce you out of the desktop for the search.
    I found it convenient to have frequently used items pinned to the Start Menu and Task Bar, but if it was a less-used item that was buried levels deep in hierarchy of the Start Menu, I would use the search field in the Start Menu.
    Searching was rarely needed because I didn't use that many different apps.

Maybe you are looking for

  • How can I backup Adobe's software activation?

    I have purchased Adobe Creative Suite CS6 for Windows and am using it on my desktop and notebook computer. This is the maximum number of computers I'm allowed to use it on. Since the software has an activation and deactivation feature and requires an

  • Decode for this case statement?

    case when DES ='TL' or ROLE ='TL' THEN 'PM' ELSE 'PL' end case

  • BPS Flat file load ABAP objects migration error.

    Hello We are trying to load a flat file via the SAP-GUI and BPS and everything works well in DEV based on the HOw-TO guide. When trying to move the ABAP objects to QA, we get a migration error on the type /1sem/_yth_data_260ZBYAPEPL. Of course the 26

  • I am not able to download the photoshop on my macbook , what can I do?

    When I get to download photoshop direct me to a page that is not available

  • Email smartform

    Hi All, I have a requirement to email one smartform as a PDF attachment, and another smartform in the body of a mail. Currently, the settings in SCOT is that smartform will be sent out as PDF. Can I know where and how I can manually code to make the