Unable To Install FCP

Hi
Can Any one help me i am trying to install FCP Studio in My G4 Power Book, But It is telling that licence code error , user has no enough privelage.
Please help me to fix this problem

First off is the copy you are trying to install a fresh, brand new, official copy of the software. If its some ripped or dodgy version then its probably corrupted and not worth the CD/DVD its stored on.
Also check out the minimum specs for FCP Sudio here
http://www.apple.com/finalcutstudio/specs.html?finalcutpro
and make sure your Powerbook and copy of OSX is up to the task of running the software.
If everything is legit, then ctrl click on the image of your hard drive in the finder. Navigate down to "Get Info".
In the window that appears, look down at the bottom where it says "Ownership and Permissions" - here it should say "Read and Write", if it says "read only" then your gonna have to change it in the section below named "Details" using your system password.
Click the small arrow next to the word "Details" and another small section should open up. Make sure the "owner" section is correct and that the "Access" section reads "Read and Write".
If it doesn't then click the small padlock next to the "Owner" tab and change the settings accordingly. Here you will be prompted for your system password. This is the password you should have chosen when you first purchased and set up your mac.
Also make sure you are entering this password correctly when prompted for it in the installation process.
Hope this is of some help
All the best
JB

Similar Messages

Unable to install the FCP X

Purchase this FCP X for my MAC Pro, unable to install the product due to my computer's video card does not meet the minimum system requirements.
I want to upgrade my video card but i don't know which one to get that is compatible for the software and my computer. I was just wondering if anyone can help me. My mac Pro i believe it's 2008. Thanks

You have second generation try this on EBay http://cgi.ebay.com/2nd-Gen-Mac-Pro-Nvidia-GeForce-8800-GT-2008-2011-EFI64-/1207 46035844?pt=PCC_Video_TV_Cards&hash=item1c1d064a84#ht_840wt_1141

UNABLE TO OPEN FCP 6.02 PROJECT FILES AFTER INSTALLING LEOPARD!

**Unable to open FCP 6.02 project files after installing Leopard**. Tested and found that the files can be opened on another computer with OS 10.4.10, but not OS 10.5. Spoke to apple support many times, and have tried reinstalling FCP, but it didn't work.
Apple is now saying to erase my HD and reinstall from scratch. This presents a problem since i have software installed but no disc due to a move, (they are deep in offsite storage).
Anyone have this problem? Anyone know a fix?

Lynne,
There is a section in the manual on the migration tool... I don't have my machine fired up right now so can't direct you to the exact page. I think a search for migration or migrate should do it.
Two other things to try:
1. There have been numerous reports that Quicktime 7.3 is what is killing older projects. According to one of the third party program makers Apple re-wrote Quicktime changing the null value to Zero from minus-one. I'm not a code junkie so can't vouch for this but the upshot would be, go back to Quicktime 7.1 or 7.2 not 7.3
2. There is a Quicktime plugin called "Perian". For lots of people it has caused numerous problems.
Look for Perian on your machine and if you find it, drag the app to the trash... re boot and try again.
Of course the ultimate solution would be to reinstall Tiger, Final Cut Studio 2 and Quicktime 7.2. So far the most stable combined setup for me and lots of others on G5 machines.
36 degrees and thunderstorms with sleet here this afternoon. The door on my storage unit is staying closed.
Message was edited by: John Criswell

Unable to install third party effects/titles. Missing folders in Motion Template.

Hi. I am unable to install third-party titles/effects/generators in FCP X version 10.2. I navigate to my Movies/Motion Templates folder and there are no subfolders in there. I created new ones labeled "Titles", "Generators", etc and placed the complete folder of the third party effects in the appropriate subfolder, but the effects do not show up in FCP X. I am on a managed laptop and do not have Administrative control. I am wondering if because I have a user profile with limited installation control, could that be affecting my ability to add the effects or is there something else that is wrong? Any help would be greatly appreciated.

Preferences do get corrupted rather often, and deleting them is usually one of the first thing one tries whenever something strange happens in FCP X.
How exactly did you delete the preferences? The current method of choice is by holding down the command and option keys when starting the application and then confirming when the dialog box comes up.
I have not tried running FCP X from a non admin user account. Whether this could be the issue, I can't say.
Can you post screenshots of a Finder window, in column view, showing the folder structure inside Motion Templates?

HUGE problem installing FCP 7 -- Please HELP

I know that the people in this forum are ridiculously smart -- I REALLY need some help!
For the past six days I have been trying to install FCP 7. I had a version of Final Cut Studio 2 and I wanted to upgrade to FCP 3. So I put the install discs in and it automatically made me skip over installing FCP 7. I am attaching a screen shot below. You'll notice that for FCP is says "SKIP" under actions. I thought that this was due to an issue with Installer reading my old serial from FCS 2, because I never had to enter the serial number for FCS 3.
OK, so I downloaded FCS Remover and got rid of Final Cut Studio. I put in my install disc and I did have to enter the serial number. It went through fine BUT I got that SAME EXACT screen with FCP amid others being told to "skip." I do not have the option to change this.
Is there anyone else out there that can help me with this?

Both Final Cut and Compressor are unable to be checked....Most of my projects were saved in FCP 6. My partner tried to give me a project in FCP which is why I tried to upgrade. Right now I can't even access FCP 6. I might try to wipe my hard drive clean and reboot from a Time Machine backup that had FCS 2.
I might try to bring this to the Apple Store. My Macbook Pro is under warranty, though I'm not sure if they would know anything about Pro Apps
Wow, this whole ordeal has really been a nightmare.

How many times can you install FCP?

Hello everyone, new to the forums here. I've searched throught he forums but couldnt find an answer to my question.
I'm in the middle of installing Final Cut Studio 2 (waiting to put in the next disc) when my buddy came over and mentioned that you could only install FCP one time and never install it again on any other computer. This worries me because in January I was going to get a new Mac Pro and un-install FC from my Macbook Pro so I could use it on the new computer. Is this possible? Or once I install this on my laptop is it permanent?
Thanks in advance for the help

Ok so you can install it on as many machines as you like but can only use (or have one activated through registering) one at a time. I know this is a touchy subject with piracy and all, but I thought it would just be rediculous if I installed this on my laptop, and 6 months down the line wanted to install it on another computer that I own.

Unable to install itunes in windows 7 64 bit - hanging

Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
Also i am unable to uninstall Apple update software. Are these both related.
Now how do i get the software installed( itunes installed in windows 7)

Hey gigipramod,
Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64

I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
MSI Log File :-
Property(S): ProductToBeRegistered = 1
MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
Please let me how to install 64 bit package on Win7 64 bit.
Thanks in Advance.

Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.

Unable to install Cisco Unity Express 8.5.1 on SRE-700

Hi.
I have a cisco 2951 router with SRE-700 module and i want to install CUE on it. My router IP configuration is as follows:
interface GigabitEthernet0/0
ip address 10.200.190.225 255.255.0.0
duplex auto
speed auto
interface SM1/0
ip unnumbered GigabitEthernet0/0
service-module fail-open
service-module ip address 10.200.190.226 255.255.0.0
service-module ip default-gateway 10.200.190.225
ip route 10.200.190.226 255.255.255.255 SM1/0
and i have the following files in my FTP directory. Languages needed English and Arabic
cue-installer.sme.8.5.1
cue-vm-ar_SA-langpack.sme.8.5.1.prt1
cue-vm-en_US-langpack.sme.8.5.1.prt1
cue-vm-full-k9.sme.8.5.1.prt1
cue-vm-installer-k9.sme.8.5.1.prt1
cue-vm-k9.sme.8.5.1.key
cue-vm-k9.sme.8.5.1.pkg
cue-vm-k9.sme.8.5.1.pkg.install.sre
cue-vm-k9.sme.8.5.1.pkg.install.sre.header
cue-vm-langpack.sme.8.5.1.pkg
i enter the following command
service-module sm 1/0 install url ftp://<ip>/cue-vm-k9.sme.8.5.1.pkg
installation starts. last message i got is "service module reset due to an error unable to install"
Can anybody help on this?
Regards

Here is the output while installing CUE
TSC-VM#service-module sm 1/0 install url
*Mar 23 07:26:33.501: %SM_INSTALL-6-INST_RBIP: SM1/0 recei$ule sm 1/0 install url ftp://192.168.231.77/cue-vm-k9.sme.8.5.1.pkg
Proceed with installation? [no]: yes
Loading cue-vm-k9.sme.8.5.1.pkg.install.sre !
[OK - 22313/4096 bytes]
Following languages are available for installation.
#       SKU    Language Code           Language Name
1       ITA         it_IT          CUE Voicemail Italian
2       ESP         es_ES          CUE Voicemail European Spanish
3       ENU         en_US          CUE Voicemail US English
4       FRA         fr_FR          CUE Voicemail European French
5       ESO         es_CO          CUE Voicemail Latin American Spanish
6       ESM         es_MX          CUE Voicemail Mexican Spanish
7       ARA         ar_SA          CUE Voicemail Arabic
8       NLD         nl_NL          CUE Voicemail Dutch
9       SVE         sv_SE          CUE Voicemail Swedish
10       NOR         no_NO          CUE Voicemail Norwegian
11       FRC         fr_CA          CUE Voicemail Canadian French
12       PTG         pt_PT          CUE Voicemail Portuguese
13       TUR         tr_TR          CUE Voicemail Turkish
14       HUN         hu_HU          CUE Voicemail Hungarian
15       ENG         en_GB          CUE Voicemail UK English
16       DEU         de_DE          CUE Voicemail German
17       DAN         da_DK          CUE Voicemail Danish
18       PTB         pt_BR          CUE Voicemail Brazilian Portuguese
19       KOR         ko_KR          CUE Voicemail Korean
20       CHS         zh_CN          CUE Voicemail Mandarin Chinese
21       JPN         ja_JP          CUE Voicemail Japanese
22       RUS         ru_RU          CUE Voicemail Russian
23       HBR         iw_IL          CUE Voicemail Hebrew
You can install upto 5 language(s) on this platform.
Please select the language(s) you want to install by entering the language number(s)
Languages can be entered as comma separated or space separated list
Example: 1,3 would select 'Italian' and 'US English'
Enter languages:3, 7
Following languages will be installed on the system:
CUE Voicemail US English
CUE Voicemail Arabic
Do you want to continue with the selected options?(y/n):y
input string: lang=no=2,CUE Voicemail US English,CUE Voicemail Arabic
TSC-VM#
*Mar 23 07:27:03.105: %SM_INSTALL-6-INST_RESET: SM1/0 is reset for software installation.
*Mar 23 07:27:42.493: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
*Mar 23 07:27:42.497: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:27:49.197: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:00.877: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:05.921: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:35.380: Delivery Ack could not be sent due to lack of buffers
*Mar 23 07:28:46.764: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
*Mar 23 07:28:46.904: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Parsing package manifest files ....
*Mar 23 07:28:49.172: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
*Mar 23 07:28:50.012: %SM_INSTALL-6-INST_FAIL: SM1/0 is reset due to Unable to install. Please try again.
TSC-VM#service-module sm 1/0 status
Service Module is Cisco SM1/0
Service Module supports session via TTY line 67
Service Module is trying to recover from error
Service Module heartbeat-reset is enabled
Service Module status is not available
No install/uninstall in progress
My FTP Log is as follows
#Software: Microsoft Internet Information Services 5.1
#Version: 1.0
#Date: 2011-03-23 07:25:44
#Fields: time c-ip cs-method cs-uri-stem sc-status
07:25:44 10.200.190.222 [1]USER anonymous 331
07:25:44 10.200.190.222 [1]PASS [email protected] 230
07:25:46 10.200.190.222 [1]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
07:25:46 10.200.190.222 [1]QUIT - 426
07:25:46 10.200.190.222 [2]USER anonymous 331
07:25:46 10.200.190.222 [2]PASS [email protected] 230
07:25:49 10.200.190.222 [2]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
07:25:49 10.200.190.222 [2]QUIT - 226
07:26:43 10.200.190.222 [3]USER anonymous 331
07:26:43 10.200.190.222 [3]PASS [email protected] 230
07:26:45 10.200.190.222 [3]sent /cue-vm-k9.sme.8.5.1.key 226
07:26:45 10.200.190.222 [3]QUIT - 226
07:26:45 10.200.190.222 [4]USER anonymous 331
07:26:46 10.200.190.222 [4]PASS [email protected] 230
07:26:48 10.200.190.222 [4]sent /cue-vm-k9.sme.8.5.1.key 226
07:26:48 10.200.190.222 [4]QUIT - 226
07:26:50 10.200.190.222 [5]USER anonymous 331
07:26:50 10.200.190.222 [5]PASS [email protected] 230
07:26:52 10.200.190.222 [5]sent /cue-installer.sme.8.5.1 426
07:26:52 10.200.190.222 [5]QUIT - 426
07:26:52 10.200.190.222 [6]USER anonymous 331
07:26:52 10.200.190.222 [6]PASS [email protected] 230
07:27:00 10.200.190.222 [6]sent /cue-installer.sme.8.5.1 226
07:27:00 10.200.190.222 [6]QUIT - 226
07:27:02 10.200.190.222 [7]USER anonymous 331
07:27:02 10.200.190.222 [7]PASS [email protected] 230
07:27:04 10.200.190.222 [7]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
07:27:04 10.200.190.222 [7]QUIT - 226
07:27:04 10.200.190.222 [8]USER anonymous 331
07:27:04 10.200.190.222 [8]PASS [email protected] 230
07:27:06 10.200.190.222 [8]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
07:27:06 10.200.190.222 [8]QUIT - 226
07:27:06 10.200.190.222 [9]USER anonymous 331
07:27:07 10.200.190.222 [9]PASS [email protected] 230
07:27:09 10.200.190.222 [9]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
07:27:09 10.200.190.222 [9]QUIT - 426
07:27:09 10.200.190.222 [10]USER anonymous 331
07:27:10 10.200.190.222 [10]PASS [email protected] 230
07:27:11 10.200.190.222 [10]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
07:27:11 10.200.190.222 [10]QUIT - 226
07:27:47 10.200.190.223 [11]USER anonymous 331
07:27:47 10.200.190.223 [11]PASS [email protected] 230
07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
07:27:47 10.200.190.223 [11]QUIT - 226
07:27:48 10.200.190.223 [12]USER anonymous 331
07:27:48 10.200.190.223 [12]PASS [email protected] 230
07:27:48 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
07:27:49 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
07:27:49 10.200.190.223 [12]QUIT - 226
Please assist

Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4

Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])

Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh

Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS

Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.

Hi,
    I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2053898239
Start time:                    2015-02-08 23:03:01
End time:                      2015-02-08 23:07:31
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
Next step for RS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
Next step for FullText:        Use the following information to resolve the error, and then try the setup process again.
Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name:                  RLC_WORK
Machine processor count:       4
OS version:                    Future Windows Version
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered Configured
SQL Server 2012
Client Tools Connectivity                1033
11.2.5058.0     No         Yes
SQL Server 2012
Client Tools Backwards Compatibility     1033
11.2.5058.0     No         Yes
SQL Server 2012
Client Tools SDK                         1033
11.2.5058.0     No         Yes
SQL Server 2012
SQL Server Data Tools                    1033                 Express Edition
11.2.5058.0     No         Yes
SQL Server 2012
LocalDB                                  1033
Express Edition      11.0.2100.60    No         Yes
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
Installation location:         C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition:          Express
Slipstream:                    True
SP Level                       2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title:                         Service Pack 2
Knowledge Based Article:       KB 2958429
Version:                       11.2.5058.0
Architecture:                  x64
Language:                      1033
Update Source:                 Slipstream
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                true
FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          AllFeatures_WithDefaults
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           RLC_WORK\Robert
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  true
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  Slipstream
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Reporting Services - Native
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Full-Text and Semantic Extractions for Search
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix

Unable to install SQL server 2000 and 2005 on Satellite A205-s5831

Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response me

Hi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software

Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1

Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?

Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Unable to install Sql Server 2008 R2 express on windows 2003

Hi,
I am unable to install sql server express edition with management tools, on windows server 2003. During rules check, it gives an error that minimum os version is not supported.
.net framework requirements have been met.
Is there something that I am missing ? Any pointers would be of immense help
thanks
Saagar

Hello,
Whats is Service Pack edition of Windows 2003 server.As per prerequisites it requires SP2 for windows Server 2003 I guess your server is not updated to latest SP.Please refer below link for hardware and software requirement
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1

I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result:                  Failed: see details below
Exit code (Decimal):           -2068053929
Exit facility code:            1212
Exit error code:               87
Exit message:                  Failed: see details below
Start time:                    2014-03-18 14:59:31
End time:                      2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.

Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable To Install FCP

Similar Messages

Maybe you are looking for