Unable to install frmwr and data full
So when I heard about the new Maemo update for my N900 I was excited! So I tried to do a install through the app manager and received the Unable to install not enough free space or whatever the error was. So I too the following steps to "free space" space which I had plenty of.... The following is a list of applications that I had installed:
maemo geolocation plugin for the micro b browser
dial central
duke3d cd version
worldtv99
petrovich
numptyphysics
duke 3d timidity
prboom
mplayer
angry birds
kmplayer
cbrpager
firefox and mozilla runtime...
stratagus
I uninstalled all of these applications except for stratagus.... and these applications :
Sorry I re-installed K-player before I tried cpitchford's solution
Still received the same error so I tried what I found in this link: Free Up RootFS
I tried the following from that link :
Use apt cache outside of rootfs
it produced a error message that told me to run
"apt-get -f install" or something like that which installed the firmware but it gave me some error I was like w/e .... restarted my N900 and received a Nokia Loading screen and then it did the normal loading start-up
Check my Firmware and was like WIN!
But there was a problem lingering txt messages I recieved the following error:
I was like RAGE!!!!!!
So a quick google produced this link: Device Storage Full Message - Unable to Send or Receive Messages
Big Thanks to: cpitchford
After I followed cpitchford's instructions I was like **bleep**?!? All my txt history was gone I was like RAGE!!!!! Again...
I still received that error, so I was like **bleep**?!
So I un-installed stratagus.... Rebooted my N900 That seemed to fix my problem. But **bleep**?!?
My text message history was still gone?!? What to do What to do....!
I backed up my data via Nokia's backup tool!
So I restored the following:
Communication and Calandar
Rebooted my N900 and that seemed to fix it.
Other useful information:
I have a micro sd card in my n900 it was needed for stratagus
jabber for facebook was configured and used
gtalk
Well that's pretty much it the thing I'm looking for is **bleep** happened and what simple steps can I do to prevent this from happening, or what applications do I need to uninstall next time instead of that long laundry list I produced?
Also cpitchford after I ran your commands is there a way to restore those messages or view them?
go into your app manager:
app manager/menu/application catalogs/(go into each catalog and "disable" them all except for Nokia Applications & Nokia System softwrae updates)
this will open enough space for you to do the update.
if you still get an update, then you probably have a corrupt file. but i am 90%+ sure that this will allow you to do the update.
Similar Messages
-
After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?
Hi Josephineapo,
If you are trying to update your iPhone over-the-air rather than through iTunes, and you are having issues with installing it, then I'd like you to please follow the steps outlined below.
If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
Resolve issues with an over-the-air iOS update - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H. -
TS5376 I am unable to install iTune and open it, any help !!
I am unable to install iTune and open it, any help !!
Are you getting error messages when you try to install and launch iTunes? If so, what do they say? (Precise text, please.)
-
HP Envy 5532 Printer - unable to install a driver with full functionality
Hi we have purchased a HP Envy 5532 all-in-one and were advised (and as stated on the packaging) that it will print 2 sided automatically.
So far we have followed the instructions on various sites but we do not appear to have the option in the printer's Preferences to be able to select 2 sided printing from the drop down list on the layout screen as there is no drop down list in there to select from as illustrated in the screen grab below:
The options to the left of the screen grab allow me to select a manual 2 sided option where it will prompt us to reload the paper manually but no automatic options?
Our operating system is: Windows 8.1 Pro 64-bit and we have been on www.hp.com and downloaded the appropriate driverfor this environment.
The driver currently installed is: HP Envy 5530 Series Class Driver - the driver would not install off the disk which came with the printer so this was the recommended official download via the HP website
We have run the HP Print and Scan Doctor supplied on HP Connected it found issues with the driver "the Driver does not have full functions installed" and attempted to download a fully featured driver - this has failed again and again.... to load
We then downloaded and ran the "HP Installation failure unknown device" application and followed this to the letter 5 times!!! all this did was to stop the printer working at all. It ran until the install stage and then it keeps coming up unable to install on network - the printer is there on our network with an IP address???
We disabled all Firewalls and ran the install without any start up items running via misconfig options as directed but still it fails at the same point on installation.
We had to uninstall all HP drivers and let the PC "add a printer" via the Control Panel options which it has and we are able to print again but we do not have full functionality as we still can not print automatic 2 sided copies and when we run HP Print and Scan Doctor it still recognises that we do not have full functionality!!!
Any help would be appreciated
Thanks Steve@Steve_Reeder, welcome to the Community
I read through your post about how you do not have access to the full software and options for your Envy 5532, as the Full Feature driver is not installing successfully on your Windows 8.1 system. I saw that you have tried various troubleshooting steps, such as a Clean Boot (msconfig), the Print and Scan Doctor, etc.
I will do my best to make some helpful suggestions to you to try out.
It seems as though you are trying to install on your network, could you possibly try installing the printer as a USB connection, and afterwards converting the USB connection to wireless through the HP software (applies to wireless connection and not ethernet)? If you're installing ethernet, skip this suggestion.
You could also try installing the printer under a Clean Boot (msconfig) and turn off your firewall, under a new user account with Admin Privileges, to see if that will work.
Another idea would be to run the System File Checker to see if this scan will pick up any issues:
Using System File Checker to Restore System Files
Please let me know your findings thus far, and if you notice any error messages or codes, let me know all of the details.
I hope to hear from you, enjoy your Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Unable to install Rescue and Recovery 4.50
Hi all,
I bought x220 tablet here in Germany, so I received windows 7 professional in German language.
I wanted to use English version of windows so I installed English version of windows hence lost all lenovo default settings. Now I am trying to install rescue and recovery 4.50 and it is not working with the msg " make sure that .tvt data is in correct installation pack folder" I translated this msg from German to Englich
Before installing Rescue and Recovery 4.50 I also installed
Microsoft Visual c++ 2005 SP1 Redisributable Package (x64) and
Sysprepbackup Acessory Package which was mentioned in Lenovo support.
If someone has already solved such problem, I would be glad to know the answer.
Thanks and regards,
Bhargav PotdarIt seems like R&R is missing the necessary language file(s), so I recommend downloading and installing the package that includes support for all languages: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/z936_setup_rnr450_025c.exe
Even on English version of Windows, if you are using German language support like you are, R&R will need the German language installation files. -
Unable to reset time and date after a software upgrade
unable to reset the time and date after a software upgrade on the TV
hello
I'm having a similar problem with my macbook. I just did a software update and now I can't get onto my internet. I checked the network diagnostics and the connection is fine, except when i click on the safari icon nothing happens.
Can anyone help with this?
Thanks! -
Problem in audio driver and unable to install rescue and recovery ver 4.3 -
Dear community collegues,
I have installed original windows7 home premium in my lenovo N100 series 0768-54A model y'day. Though every thing went well, the AC97 audio driver could not be installed. Can any one provide me a solution to make the audio working in Windows7 Home Premium.
Similarly after new installation, I could not install rescue and recovery version 4.3 (windows7 compatible) in to the system, every attempt failed. Could any one provide a solution.
thanking You.
Sakthivelu V M ChennaiI am not sure which audio chipset your N100 has, so
Try this for sound:
Go to THIS web page.
Download Soundmax audio driver for Vista.
Extract the files by double clicking, and note where they
are being extracted to.
Uninstall any sound driver you have installed, reboot.
If windows says New Hardware Found, click cancel.
Go to folder where downloaded drivers were extracted,
and run Setup.
If Soudmax drivers do not work, uninstall and repeat
with the Realtek audio drivers.
I do not think Rescue/Recovery will work except for
the originally installed OS. -
im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
what can i do?
HELP!Hello john.george,
You may need to verify that TCP port 123 is open and available for use on your router.
TCP port 123 is used to communicate with a network time server.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen -
Unable to install breqn and cadabra on Arch Linux
Hi,
I am running Arch Linux (64-bit) on my Dell XPS 15 laptop. I use LaTeX for all my scientific typesetting. When I was running Fedora on this system earlier, I used Cadabra, an open source symbolic manipulation program suited to calculations in quantum field theory. I tried to install cadabra in Arch using yaourt, but I get the following error message:
[root@krypton ~]# yaourt cadabra
1 aur/cadabra 1.29-1 (2)
Cadabra is a computer algebra system (CAS)
2 aur/modglue 1.16-2 (1)
Modglue library for Cadabra computer algebra system (CAS)
==> Enter n° of packages to be installed (ex: 1 2 3 or 1-3)
==> -------------------------------------------------------
==> 1
==> Downloading cadabra PKGBUILD from AUR...
x PKGBUILD
x cadabra.install
First Submitted: Wed, 16 Sep 2009 08:01:06 +0000
cadabra 1.29-1
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> cadabra dependencies:
- conlie (building from AUR)
- modglue>=1.16 (building from AUR)
- breqn (building from AUR)
==> Edit cadabra.install ? [Y/n] ("A" to abort)
==> -------------------------------------------
==> n
==> Continue building cadabra ? [Y/n]
==> ---------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for cadabra:
==> Downloading breqn PKGBUILD from AUR...
x breqn.install
x PKGBUILD
First Submitted: Wed, 16 Sep 2009 08:00:09 +0000
breqn 1.2b-2
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> breqn dependencies:
- texlive-bin (already installed)
- texlive-core (already installed)
==> Edit breqn.install ? [Y/n] ("A" to abort)
==> -----------------------------------------
==> n
==> Continue building breqn ? [Y/n]
==> -------------------------------
==>
==> Building and installing package
==> WARNING: Building package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Making package: breqn 1.2b-2 (Thu May 31 20:10:59 IST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading mh.zip...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2196k 100 2196k 0 0 74677 0 0:00:30 0:00:30 --:--:-- 73748
==> Validating source files with md5sums...
mh.zip ... FAILED
==> ERROR: One or more files did not pass the validity check!
==> ERROR: Makepkg was unable to build breqn.
==> Restart building breqn ? [y/N]
==> ------------------------------
==>
Surprisingly, a search on google did not reveal anything useful. Apparently the problem is validating the package 'breqn' which is a prerequisite for cadabra, but fails to install through yaourt because of some md5 checksum validation error (as I understand). And it seems there is no override for this in yaourt.
Any suggestions to help me get cadabra to work will be greatly appreciated.
Thanks in advance!
References:
1. http://aur.archlinux.org/packages.php?ID=30207
2. http://cadabra.phi-sci.com/
Last edited by darkmav (2012-05-31 14:41:57)Your problem is that the file the PKGBUILD is downloading is not the same one that the creator of the PKGBUILD was working with.
an md5sum is a hash (a fingerprint, if you will) of the file. When the PKGBUILD was created, that fingerprint was included in the file. That yours does not match means one of two things:
1. The file you downloaded was either corrupt, or has been tampered with, or
2. The file you downloaded has been updated by the author, but the PKGBUILD has not been updated.
If it is case 1, stop. If it is case 2, you can do the following:
The Cadabra PKGBUILD was updated last June (almost a year ago). You can either post a comment to the AUR and see if the maintainer will fix it, or you can fix the PKGBUILD yourself and (hopefully) post the changes back to the AUR as a comment.
# Contributor: Dariusz 'quasi' Panchyrz <[email protected]>
pkgname=cadabra
pkgver=1.29
pkgrel=1
pkgdesc="Cadabra is a computer algebra system (CAS)"
arch=('i686' 'x86_64')
url="http://cadabra.phi-sci.com/"
license=('GPL')
depends=('conlie' 'modglue>=1.16' 'breqn')
install=$pkgname.install
source=(http://cadabra.phi-sci.com/$pkgname-$pkgver.tar.gz)
md5sums=('ea6e64535e6a9abe8810e5baa6a579a8')
build() {
cd $startdir/src/$pkgname-$pkgver/
./configure --prefix=$startdir/pkg/usr/
make || return 1
make install || return 1
Notice the md5sums entry in the PKGBUILD above. It needs to be updated in accordance with this article and then built on your machine using makepkg. I strongly suggest you not user a helper for this, but rather use the methods described here
Last edited by ewaller (2012-05-31 15:09:09) -
Bought new iPod but unable to install iTunes and Quicktime, so what now?
I tried to install iTunes, but when it gets to the Quicktime module, it stops working and says the following: This installer cannot upgrade QuickTime 7 for Windows Public Preview. Please uninstall it first."
OK, so how do I do this. There is NO Quicktime listed anywhere in my Add/Remove folder, and no Quicktime shows up when I run the word through the FIND search in Registry Editor.
If I cannot resolve this, I'll have to return the iPod to Apple as an unworkable gadget.
Dan HedgpethI have just found a way of sending some feedback to
Apple.
Will be interested to see what they say to this>>
I find it ridiculous that the cost of these ipods
does not include some on line support from Apple. We
have to try and rely on other users in discussion
forums. All I am finding is there are loads of others
on thee forums with similar problems unable to find a
solution.
Please advise.
Also found a number for 'tecnical support' after 5
days trying....
0870 876 0753
Will give them a 'polite' call tomorrow!!!!
Thanks for the phone No. I was having a problem with Quicktime which I couldn,t resolve by checking the discussion forums but that phone No. was a great help. Alhough you are talking to a call centre somewhere in the world and have to be careful with the language difficlties it was a help and it,s a shame Apple don't make this No. more easily available, so well done for finding that No.
You can go days or even months for a solution and I think Apple should have an online Tech. expert to help out.
Dell Windows XP Pro
Dell Windows XP Pro
Dell Windows XP Pro -
Unable to install Quicktime and itunes
Hi,
I am getting beyond despair and desperate for help on this please (I have spent hours and hours and still no further forward).
I am running XP with service pack 3 installed. Windows updates are up to date.
When iTunes 9 first came out it wanted to update but returned an error: -
"The installation of QuickTime did not complete successfully. ITunes requires QuickTime"
I therefore took the advice posted on Apples support site to download and install QuickTime separately.
Attempting the Quicktime installation first, after installing the Apple Application Support and Apple Software Update elements (I can see these in the add/remove programmes utlility) the installation crashes with the error message-
"The installer encountered errors before the required operation for QuickTime could be completed. To retry these operations at a later time, please run the installer again".
I have since followed the advice here: -
http://support.apple.com/kb/TA44469
and here
http://support.apple.com/kb/HT1926
- this includes all items through to and including the Additional Troubleshooting.
In addition, I have searched for and deleted all the .msi files relating to iTunes, QuickTime etc.
One thing that I could not do is to attempt an install through Safe Mode. Windows would not allow it (even though I was logged on as administrator).
Where do I go from here?
Please help -life's too short to loose 2 days getting Itune to work!Great catch, Diane!
Following hard drive problem a few months ago, I had reinstalled XP onto a new primary drive, labeled F. A second drive is also installed on the machine, labeled C, which had come from another computer. This also has a copy of XP in it, although it does not boot from this drive. In this case however, the path for the msiexec service was pointing to the old C drive.
Crikey. I've seen documentation on that sort of thing as a possible cause of Invalid Drive installation error messages, but I don't think I've ever seen it reported before "in the flesh" (as it were). I don't think I'd have thought to check on that at all with your error messages.
Glad you got things working, Diane. Many thanks for letting us know about your resolution. -
Unable to install scilab and eclipse
I've eclipse installed and want to have scliab as well. But scilab wants jre stuff which conflicts with deps from eclipse.
Is there a way to solve this? Or is it just no possible on arch to have both packages installed?
resolving dependencies...
looking for inter-conflicts...
:: jre conflicts with java-gcj-compat. Remove java-gcj-compat? [Y/n]
error: failed to prepare transaction (could not satisfy dependencies)
:: eclipse: requires java-environmentPacman -Si can be very handy in these cases.
pacman -Si fop
Repository : community
Name : fop
Version : 0.95-4
URL : http://xmlgraphics.apache.org/fop/
Licenses : APACHE
Groups : None
Provides : fop
Depends On : java-xmlgraphics-commons java-commons-logging java-commons-io java-batik java-avalon-framework
Optional Deps : None
Conflicts With : fop
Replaces : None
Download Size : 2022.33 K
Installed Size : 2252.00 K
Packager : Stefan Husmann <[email protected]>
Architecture : i686
Build Date : Thu 19 Feb 2009 10:59:11 PM CET
MD5 Sum : 80b03b24759e7ec1505aa207043c08d5
Description : XSL-FO implementation in Java
pacman -Si java-avalon-framework
Repository : community
Name : java-avalon-framework
Version : 4.2.0-2
URL : http://excalibur.apache.org/
Licenses : APACHE
Groups : None
Provides : None
Depends On : jre
Optional Deps : None
Conflicts With : None
Replaces : None
Download Size : 67.53 K
Installed Size : 112.00 K
Packager : Unknown Packager
Architecture : i686
Build Date : Sun 01 Feb 2009 05:51:02 PM CET
MD5 Sum : 91f1f08d11e6ae85cfd26af62f2f5625
Description : Reusable components for J2SE applications
package fop depends on java-avalon-framework , which depends on jre .
java-avalon-framework is in AUR community, and another user already posted a comment about this.
You can try mailing the maintainer, or use abs to get the PKGBUILD and change jre to java-runtime yourself. -
Unable to install IOS4 - and now unable to restore settings
Hope someone can help
I downloaded the new IOS4 software last night, and as it was about half way through installing the software it stopped. The blue bar just stayed where it was and on the phone itself it, I had the white apple logo and the bar indicating it was installing.
I left it on all night, but, still no further progress. I had to disconnect the phone from itunes, then do a force quit. It asked me to reconnect to itunes, which I did, then when it was trying to restore factory settings - the same thing happened - when the blue bar was half way a long it stopped.
Any ideas whats wrong and how can I fix it?
(I have the 3gs and an iMac with Snow Leopard and it was the latest itunes.)I have fixed mi situation... Apparently it's not the .ipsw file or the iphone itself, but the iTunes installed on my computer.. I got up and went to another Mac here in the office, updated the iTunes on that Mac, copied the .ipsw file from my Mac to user/library/itunes/iPhone Software Updates (if you don't see the folder on the other mac copy the folder too) and then started the process of upgrading my iPhone... It was painless and right away. Afterwards I synced the iPhone with my Mac and iTunes and got my apps into my 3GS with iOS4! Good Luck.
P. S.: That other Mac has 10.5.x installed, mine has 10.6.4 -
Unable to install Forms and Reports in Red Hat 5.7
Hi group,
I have followed Note:564174.1 "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5" and I have verified all the prerequisites, but I am still getting an installation error (while linking Pro*C):
This is part of my Installation logfile:
Starting install Link Phase of component Pro*C/C++
Calling Action unixActions10.1.0.4.0 make
installMakePath = /usr/bin/make
installMakeFileName = /u01/oasforms/formsoas/10.2.0.2/precomp/lib/ins_precomp.mk
installTarget = relink
installArguments = ORACLE_HOME=/u01/oasforms/formsoas/10.2.0.2,EXENAME=proc,
undoMakeFileName = null
undoTarget = null
undoArguments = null
logFile = /u01/oasforms/formsoas/10.2.0.2/install/make.log
progMsg = Linking proc
The output of this make operation is also available at: '/u01/oasforms/formsoas/10.2.0.2/install/make.log'
Start output from spawned process:
Linking /u01/oasforms/formsoas/10.2.0.2/precomp/lib/proc
/usr/bin/ld: skipping incompatible /u01/oasforms/formsoas/10.2.0.2/lib//libpls10.a when searching for -lpls10
/usr/bin/ld: skipping incompatible /u01/oasforms/formsoas/10.2.0.2/lib/libpls10.a when searching for -lpls10
/usr/bin/ld: skipping incompatible /u01/oasforms/formsoas/10.2.0.2/lib/libpls10.a when searching for -lpls10
/usr/bin/ld: cannot find -lpls10
collect2: ld returned 1 exit status
/bin/chmod: cannot access `/u01/oasforms/formsoas/10.2.0.2/precomp/lib/proc': No such file or directory
make: *** [u01/oasforms/formsoas/10.2.0.2/precomp/lib/proc] Error 1
I am uploading logfile for this last instalaltion.
Any help or update will be really appreciated.
Thanks in advance.
Kind regards,
FranciscoWe have applied Patch# p4505133_10105_LINUX.zip for this. Check 390623.1 out.
-
Unable to install itunes and quicktime both error occur: system cannot open signified folder
my pc's specifications are : dual core processor, 1 gb ram,windows xp sp2 (os), 300gb hard disk
I have just found a way of sending some feedback to
Apple.
Will be interested to see what they say to this>>
I find it ridiculous that the cost of these ipods
does not include some on line support from Apple. We
have to try and rely on other users in discussion
forums. All I am finding is there are loads of others
on thee forums with similar problems unable to find a
solution.
Please advise.
Also found a number for 'tecnical support' after 5
days trying....
0870 876 0753
Will give them a 'polite' call tomorrow!!!!
Thanks for the phone No. I was having a problem with Quicktime which I couldn,t resolve by checking the discussion forums but that phone No. was a great help. Alhough you are talking to a call centre somewhere in the world and have to be careful with the language difficlties it was a help and it,s a shame Apple don't make this No. more easily available, so well done for finding that No.
You can go days or even months for a solution and I think Apple should have an online Tech. expert to help out.
Dell Windows XP Pro
Dell Windows XP Pro
Dell Windows XP Pro
Maybe you are looking for
-
I had to reformat my hard drive on my pc...have a backup now of my music on my PC....my question is how do I get the music into I tunes and have I tunes recognize my ipod now when I connect it to my pc so that it syncs automatically Thanks
-
How can I tell Tiger to open PDF's in Acrobat rather than in Preview?
Thanks for any hint! Paul G4 Dual 500 - 1.5GB RAM - Cinema 22 - OS9.2.2 Mac OS X (10.4.4)
-
Hi all, I just installed 10.0.2 and was surprised to find that there isn't an Apache directory in my Oracle home? Is this normal, and if so, is mod_plsql still available to run plsql web applications? I looked over the documentation which showed a si
-
How we can capture sender address in UMS adapter
hi, we use Custom Callout in UMS adapter to capture sender address we create one temp text file to keep sender address and but i get "java.lang.NullPointerException" import java.io.BufferedWriter; import java.io.File; import java.io.FileWriter; im
-
Cannot open attachments received?
Can somebody help? I cannot open most attachments on incoming mail? Mostly photos ETC& ETC