Unable to install Generation 2 VM using ISO on win Server 2012 R2
I'm having a problem trying to build a new Generation 2 VM for Windows 8.1 Enterprise. I create a new Gen2 VM and then tell it to install the OS off of a virtual DVD drive attached to the SCSI controller. The ISO file mounted in the virtual DVD drive is
the Windows 8.1 Enterprise x64 evaluation ISO that I downloaded off of TechNet. When I start up the VM to install the OS, I receive this error:
"Synthetic SCSI controller [...] Failed to Power on with Error: 'The version does not support this version of the file format'".
Basically the SCSI controller can't read the ISO file. However, the IDE controller on a Gen1 VM can read and boot from the ISO just fine. Has anyone else run into this problem? Is there a way to resolve this issue and allow me to boot the ISO from a
SCSI controller?
Or is there a bug with the client Hyper-V SCSI controller that makes it unable to boot from ISOs properly? Has anyone experienced a similar issue on the server side?
Did you check your VM boot order?
Also, since this forum is under SCVMM - are you attempting to use SCVMM to create this Generation2 VM and then boot it from the ISO? If so, you may have to use the Hyper-V Manger to do that, as the boot order could not be changed with SCVMM the last
I checked.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.
Similar Messages
-
Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
Regards Swishi...p.s If anyone can help me...it'll make my day :3.ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/ -
Can't copy and paste files using RDP session in server 2012
I'm running windows 8, but I have also verified on a windows 7 machine as well. We have server 2012 installed on a machine
I use remote desktop to get into. I cannot copy files from my local pc and use paste to get them to the server. I could do this with server 2008. Is there some setting I have to change or does this not work with server 2012?
FYI, clipboard is checked when I open my remote desktop connection window. If I connect into a win server 2008 r2 machine from the same local machine, I can copy and paste files
just fine.
- MichaelHi,
I believe RDS clipboard redirection should be enabled by default also on Windows Server 2012. Is there perhaps is a Group Policy Object active that is configured to disable Clip Board Redirection? Either on the computer or the user OU. If not:
You did not explicitly state this, but I'm assuming that you are running in Application Mode (meaning you did not install the RD Session Host role) ? If so please check the registry on the Windows Server 2012 destination server and look for:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Winstations\RDP-Tcp\fDisableClip
this should be set to
0, to make allow Clipboard Redirection
Also check the key below:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Addins\Clip Redirector
This should have:
Name
REG_SZRDPClip
Type
REG_DWORD0x00000003
If you did run the RD Session Host role, and you have done so using a Scenario Based Deployment (Scenario
Based Deployment of RDS in Windows Server 2012 ) you will have a Remote Desktop Management Service GUI available as pat of the Server Manager with which you can enable or disable ClipBoard Redirection from within a GUI on a Session Collection level
or you can use PowerShell
Using Powershell to install, configure and maintain RDS in Windows Server 2012
Kind regards,
Freek Berson
The Microsoft Platform
Twitter
Linked-in
Wortell company website -
How do I install Firefox on Win Server 2012 Remote Desktop?
I have tried several ways to download and install Firefox on my Win server 2012 Remote Destop. The software installs, but the installation loops and continuously opens new tabs for
res://iesetup.dll/SoftAdmin.htm
Are there special instructions to install Firefox in this environment?The url in ie gave me this page [see attached] and I did find a question similar in mozillazine [http://forums.mozillazine.org/viewtopic.php?f=7&t=173325&start=0&st=0&sk=t&sd=a]
But there is also an extended support release for enterprise environments that you can check out: [https://www.mozilla.org/en-US/firefox/organizations/] -
How can I create a Pooled VDI infraestructure using Win server 2012 as VM image?
Hello
I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
ThanksDear Ryan
I think the point is other than committing a breach of licensing. I have a legitimate need to use a pooled server system, which incidentally is not going to be end user.
The "economy" of the proposed structure can make a more efficient use of the equipment.
This is an excerpt of the MS VDI Q&A:
Do I need to pay for Windows VDA if I use Windows Server as a client operating system in my virtual machine?
OR
I’ve heard that I can avoid paying for Windows VDA by using Windows Server as my VDI desktop OS. Is this true?
Running a Windows Server®
OS as the desktop in the datacenter does not require Windows VDA, but there are many reasons why a server OS should not be used as a desktop, especially in the datacenter:
The user experience with servers as the desktop is very different from using a Windows client.
Many applications for end users were written for a client OS and not a server OS. Each of your applications would need to be retested to ensure compatibility with a server OS. Additionally, most vendors
do not offer support for client applications running on servers.
Clients and servers are on different patch cycles, adding to management complexity.
Most of the VDI ecosystem will support the Windows client in the datacenter, not server OS’s.
However, if you do decide to run a server OS as the desktop, please note that you will need to pay a Remote Desktop Services Client Access License (RDS-CAL) to correctly license that scenario. -
Can i install Try version NW CE on Win Server 2003 64 bit or must it be 32?
Hallo everybody,
i wish install try version NW CE on Win Server 2003 64 ? Here
http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a6bd7b-3dfc-2c10-eb95-aae0f777d4ab
i read it run on 32 bit. Mean that on 32 only or i can install on 64 Bit too?
Thank you in advance!!!32 only.
-
I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
ThanksHi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki -
How to create a Pooled VDI infrastructure using Win server 2012 as VM image?
I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
ThanksHi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki -
Hello
Can someone please help me with the following question.
I have a standalone Server and need to apply settings from SCM, I can see how to do this following the instructions in the following article
http://windowsitpro.com/security/q-how-can-i-apply-security-baseline-i-defined-through-microsoft-security-compliance-manager
The problem is the LocalGPO.wsf that ships with the above version of SCM does not run on Server 2012 R2 (only Server 2012)
my question is,
is there a later version of LocalGPO.wsf I can use that works on Server 2012 R2 ?
Thanks
AAnotherUser__
AAnotherUser__Hi,
Thanks for your post.
SCM Baselines for Windows 8.1, IE 11 and Server 2012 R2 are now live!
http://blogs.technet.com/b/secguide/archive/2014/09/04/scm-baselines-for-windows-8-1-ie-11-and-server-2012-r2-are-now-live.aspx
For more SCM related issue, i think you may ask in:
https://social.technet.microsoft.com/Forums/en-US/home?forum=compliancemanagement
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Unable to Install Windows 7 using Boot Camp Assistant
I recently suffered a hard disk failure. After replacing the disk, I have recovered all data with the exception of being unable to install windows 7 on a new boot camp partition. I am able to create the partition using boot camp assistant, but I am subsequently been unable to install windows following the directions provided. Any help would be appreciated. I have a late 2009 27" iMac running OSX Mavericks.
It depends of the OS X version you're using. If it's 10.6, insert the Mac OS X DVD and install them.
If it's 10.7 or 10.8:
1. Press X key while your Mac is starting to start into OS X.
2. Open Boot Camp Assistant, download drivers and burn them into a DVD or USB drive.
3. Start into Windows and install Boot Camp drivers -
Unable to install GC agent using GUI
hey guys.
I am unable to install oracle 10g release 2 agent on sun 9 sparc solaris machine using the GUI interphase. Now my question is, is there a way to install it without using the GUI interphase? if yes, let me know.
Thanks.Yes, you can by doing silent install but it important to know
what problem are you facing in GUI mode beacsue same thing could
reflect on silent install as well. -
Unable to install Boot Camp 3.1 on Win 7 on iMac Intel (suggestions?)
I got the OEM version of Windows 7, professional and 64 bits, and installed it via Boot Camp Assistant. Got it running (no keyboard recognition), and tried to install Boot Camp for Win 7 via the Apple site:
"Unable to install 3.1, needs 3.0".
No problem, insert OSX disk (10.6.3), click, aaand:
"Boot Camp 64bit is not supported on this model"
Uh?,... I thought that my machine was supported (it's running Win7 64bits!),... any suggestions?. Am I doing something wrong?. Any help will be appreciated.Unfortunately I cannot answer your question but I'm hoping someone can help us. I went a step further than you. I have an iMac 8.1 Intel Core 2Duo 2.8 GHZ Processor (early 2008). I spoke with Apple Customer Support and made it clear that I had Windows 32 bit and 64 bit software and wanted to install on my iMac and MBP. The agent told me to order Snow Leopard for the iMac. I found out tonight I cannot use 64 bit on this particular iMac even though Customer Support had the serial number and data when we ordered the Snow Leopard disc.
So, I partitioned the HD equally between Mac and Windows. Boot Camp installed Windows 7 with no problem and then encountered the same thing you did. Install Boot Camp 3.0 before 3.1. When I put the brand new Mac OS X Snow Leopard from Apple in the iMac it said 'not supported'. I tried to install but it won't.
Funnything is Win 7 seems to be running. I am having problems with the numeric keyboard on the UBS keyboard. I haven't really tried to do too much.
My question to append to yours is how do I go about uninstalling Windows 7 and installing Windows 7 32 bit?
I'm sick about this but at least I believe I can install the 64 bit on my current MBP. I wanted it on both my computers. -
Unable to install DPM2012R2 on Windows 2008 R2 or Windows 2012 Server :(
Hi together
I'm trying installing (fresh) on a new Win 2008 R2 System DPM2012R2, i tryed the same on Server 2012.
I got every time a error message while its installing DPM (after the SQL prepraration).
I tested with SQL 2008 R2 Standard and SQL 2012 Standard without success.
On the Setup, the setup Clients dies and gives me dotn.net error Message:
1. Dialogbox
An unexpexted error occured during the installation
Fore more details, check the DPM Setup error logs.
ID: 4387
SetupDpm.exe has stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: setupdpm.exe
Problem Signature 02: 1.0.523.0
Problem Signature 03: 5226e038
Problem Signature 04: mscorlib
Problem Signature 05: 4.0.0.0
Problem Signature 06: 517a19ee
Problem Signature 07: 2606
Problem Signature 08: 9c
Problem Signature 09: System.IO.FileLoadException
OS Version: 6.1.7601.2.1.0.272.7
Locale ID: 2055
Additional Information 1: 88d5
Additional Information 2: 88d5dcdc6016348f4f024ac221a8d43d
Additional Information 3: 7cab
Additional Information 4: 7cab783845fc6de75e0b56019fda732a
2. DPM Log
[08.11.2013 14:54:47] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
[08.11.2013 14:54:47] Data : Mode of setup = User interface
[08.11.2013 14:54:47] Data : OSVersion = Microsoft Windows NT 6.1.7601 Service Pack 1
[08.11.2013 14:54:47] Information : Check if the media is removable
[08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:54:47] Data : Drive Name = C:\
[08.11.2013 14:54:47] Data : Drive Type = 3
[08.11.2013 14:54:47] Information : Check attributes of the directory
[08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:54:47] Data : File Attributes = Directory
[08.11.2013 14:54:47] Information : Check if the media is removable
[08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
[08.11.2013 14:54:47] Data : Drive Name = C:\
[08.11.2013 14:54:47] Data : Drive Type = 3
[08.11.2013 14:54:47] Information : Check attributes of the directory
[08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
[08.11.2013 14:54:47] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
File name: 'C:\Program Files\Microsoft Data Protection Manager'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:54:47] Information : Check if the media is removable
[08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:54:47] Data : Drive Name = C:\
[08.11.2013 14:54:47] Data : Drive Type = 3
[08.11.2013 14:54:47] Information : Check attributes of the directory
[08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:54:47] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:54:48] Information : The setup wizard is initialized.
[08.11.2013 14:54:48] Information : Starting the setup wizard.
[08.11.2013 14:54:48] Information : <<< Dialog >>> Welcome Page : Entering
[08.11.2013 14:54:56] Information : <<< Dialog >>> Welcome Page : Leaving
[08.11.2013 14:54:56] Information : <<< Dialog >>> Inspect Page : Entering
[08.11.2013 14:55:02] Information : The setup was cancelled by user.
[08.11.2013 14:55:02] Information : Microsoft System Center 2012 R2 Data Protection Manager setup over.
[08.11.2013 14:58:52] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
[08.11.2013 14:58:52] Data : Mode of setup = User interface
[08.11.2013 14:58:52] Data : OSVersion = Microsoft Windows NT 6.1.7601 Service Pack 1
[08.11.2013 14:58:52] Information : Check if the media is removable
[08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:58:52] Data : Drive Name = C:\
[08.11.2013 14:58:52] Data : Drive Type = 3
[08.11.2013 14:58:52] Information : Check attributes of the directory
[08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:58:52] Data : File Attributes = Directory
[08.11.2013 14:58:52] Information : Check if the media is removable
[08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
[08.11.2013 14:58:52] Data : Drive Name = C:\
[08.11.2013 14:58:52] Data : Drive Type = 3
[08.11.2013 14:58:52] Information : Check attributes of the directory
[08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
[08.11.2013 14:58:52] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
File name: 'C:\Program Files\Microsoft Data Protection Manager'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:58:52] Information : Check if the media is removable
[08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:58:52] Data : Drive Name = C:\
[08.11.2013 14:58:52] Data : Drive Type = 3
[08.11.2013 14:58:52] Information : Check attributes of the directory
[08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:58:52] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:58:53] Information : The setup wizard is initialized.
[08.11.2013 14:58:53] Information : Starting the setup wizard.
[08.11.2013 14:58:53] Information : <<< Dialog >>> Welcome Page : Entering
[08.11.2013 14:58:54] Information : <<< Dialog >>> Welcome Page : Leaving
[08.11.2013 14:58:54] Information : <<< Dialog >>> Inspect Page : Entering
[08.11.2013 14:59:05] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[08.11.2013 14:59:05] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
[08.11.2013 14:59:05] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
[08.11.2013 14:59:06] Data : Path of inspection output xml = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[08.11.2013 14:59:06] Information : Instantiating inspect component.
[08.11.2013 14:59:06] Data : Path of output xml = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[08.11.2013 14:59:06] Information : Deserializing the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
[08.11.2013 14:59:06] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
[08.11.2013 14:59:06] Information : Deserialising the scenario XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
[08.11.2013 14:59:06] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
[08.11.2013 14:59:06] Information : Getting scenarios for the product: DPM
[08.11.2013 14:59:06] Information : Getting scenarios for DPM
[08.11.2013 14:59:06] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
[08.11.2013 14:59:06] Information : Query WMI provider for SQL Server 2008.
[08.11.2013 14:59:06] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
[08.11.2013 14:59:07] Information : SQL Server 2008 R2 SP2 instance DPM is not present on this system.
[08.11.2013 14:59:07] Information : Query WMI provider for SQL Server 2008.
[08.11.2013 14:59:07] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
[08.11.2013 14:59:07] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
[08.11.2013 14:59:07] Information : Inspect context initialized with
SQL Server namespace:
\\{0}\root\Microsoft\SqlServer\ComputerManagement11
Reporting namespace:
\\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
SqlServerDetected: True
[08.11.2013 14:59:07] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
[08.11.2013 14:59:07] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
[08.11.2013 14:59:07] Information : **************************************************************************************
[08.11.2013 14:59:07] Information : Start Inspect.
[08.11.2013 14:59:07] Information : Getting checks for the group : Common
[08.11.2013 14:59:07] Information : Getting checks for the group : Install
[08.11.2013 14:59:07] Information : Getting checks for the group : Retail
[08.11.2013 14:59:07] Information : Getting checks for the group : Remote
[08.11.2013 14:59:07] Information : Check if the machine role is Domain Controller.
[08.11.2013 14:59:07] Information : Querying WMI Namespace:
\\localhost\root\cimv2 for query: SELECT * FROM Win32_ComputerSystem
[08.11.2013 14:59:07] Data : Localhost in Computer role = 3
[08.11.2013 14:59:07] Information : The machine role is not a Domain Controller.
[08.11.2013 14:59:07] Data : checkId = Processor
[08.11.2013 14:59:07] Information : Running the check: Processor
[08.11.2013 14:59:07] Information : Getting the check for the checkId : Processor
[08.11.2013 14:59:07] Information : Calling the method: CheckProcessor
[08.11.2013 14:59:07] Information : Check processor configuration.
[08.11.2013 14:59:07] Information : Query WMI provider for configuration of processor.
[08.11.2013 14:59:07] Information : Querying WMI Namespace:
\\localhost\root\cimv2 for query: SELECT * FROM Win32_Processor
[08.11.2013 14:59:08] Data : Clock speed of processor = 1900
[08.11.2013 14:59:08] Data : Manufacturer of processor = GenuineIntel
[08.11.2013 14:59:08] Information : Adding the check result entry for checkId: Processor and result: 0
[08.11.2013 14:59:08] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:08] Data : Result = 0
[08.11.2013 14:59:08] Data : checkId = Memory
[08.11.2013 14:59:08] Information : Running the check: Memory
[08.11.2013 14:59:08] Information : Getting the check for the checkId : Memory
[08.11.2013 14:59:08] Information : Calling the method: CheckPhysicalMemory
[08.11.2013 14:59:08] Information : Check the amount of RAM.
[08.11.2013 14:59:08] Information : Query WMI provider for configuration of memory.
[08.11.2013 14:59:08] Information : Querying WMI Namespace:
\\localhost\root\cimv2 for query: SELECT * FROM Win32_OperatingSystem
[08.11.2013 14:59:08] Data : Found memory = 25119276
[08.11.2013 14:59:08] Data : Total amount of memory = 25119276
[08.11.2013 14:59:08] Information : Adding the check result entry for checkId: Memory and result: 0
[08.11.2013 14:59:08] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:08] Data : Result = 0
[08.11.2013 14:59:08] Data : checkId = MMCVersion
[08.11.2013 14:59:08] Information : Running the check: MMCVersion
[08.11.2013 14:59:08] Information : Getting the check for the checkId : MMCVersion
[08.11.2013 14:59:08] Information : Calling the method: CheckMMCVersion
[08.11.2013 14:59:08] Information : Check the version of Microsoft Management Console on the machine.
[08.11.2013 14:59:09] Data : Version of Microsoft Management Console on the machine = 6.1.7600.16385
[08.11.2013 14:59:09] Data : Required version of Microsoft Management Console = 5.2.3790.2560
[08.11.2013 14:59:09] Information : MMC correct version is detected.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MMCVersion and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = KB962975
[08.11.2013 14:59:09] Information : Running the check: KB962975
[08.11.2013 14:59:09] Information : Getting the check for the checkId : KB962975
[08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
[08.11.2013 14:59:09] Information : Check if KB962975 QFE is applied.
[08.11.2013 14:59:09] Information : KB962975 QFE is applied on this system.
[08.11.2013 14:59:09] Information : Check if KB962975 QFE is applied.
[08.11.2013 14:59:09] Information : KB962975 QFE is applied on this system.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB962975 and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = KB975759
[08.11.2013 14:59:09] Information : Running the check: KB975759
[08.11.2013 14:59:09] Information : Getting the check for the checkId : KB975759
[08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\KB975759.
[08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\KB975759 is absent.
[08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
[08.11.2013 14:59:09] Information : Check if KB975759 QFE is applied.
[08.11.2013 14:59:09] Information : KB975759 QFE is applied on this system.
[08.11.2013 14:59:09] Information : Check if KB975759 QFE is applied.
[08.11.2013 14:59:09] Information : KB975759 QFE is applied on this system.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB975759 and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = KB2279787
[08.11.2013 14:59:09] Information : Running the check: KB2279787
[08.11.2013 14:59:09] Information : Getting the check for the checkId : KB2279787
[08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
[08.11.2013 14:59:09] Information : Check if KB2279787 QFE is applied.
[08.11.2013 14:59:09] Information : KB2279787 QFE is applied on this system.
[08.11.2013 14:59:09] Information : Check if KB2279787 QFE is applied.
[08.11.2013 14:59:09] Information : KB2279787 QFE is applied on this system.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB2279787 and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = KB2223201
[08.11.2013 14:59:09] Information : Running the check: KB2223201
[08.11.2013 14:59:09] Information : Getting the check for the checkId : KB2223201
[08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
[08.11.2013 14:59:09] Information : Check if KB2223201 QFE is applied.
[08.11.2013 14:59:09] Information : KB2223201 QFE is applied on this system.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB2223201 and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = MonadSoftware
[08.11.2013 14:59:09] Information : Running the check: MonadSoftware
[08.11.2013 14:59:09] Information : Getting the check for the checkId : MonadSoftware
[08.11.2013 14:59:09] Information : Calling the method: CheckMonadSoftware
[08.11.2013 14:59:09] Information : Detect if PowerShell is installed.
[08.11.2013 14:59:09] Data : Installed Version of Windows PowerShell. = 6.2.9200.16398
[08.11.2013 14:59:09] Data : Minimum Required version of Windows PowerShell. = 6.0.6002.18111
[08.11.2013 14:59:09] Information : Required version of PowerShell software is installed on this system.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MonadSoftware and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = DotNetRequiresReboot
[08.11.2013 14:59:09] Information : Running the check: DotNetRequiresReboot
[08.11.2013 14:59:09] Information : Getting the check for the checkId : DotNetRequiresReboot
[08.11.2013 14:59:09] Information : Calling the method: CheckDotNetRequiresReboot
[08.11.2013 14:59:09] Information : Check if reboot is required because of Dot Net installation.
[08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
[08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
[08.11.2013 14:59:09] Information : Reboot is not required.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: DotNetRequiresReboot and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = SISFilter
[08.11.2013 14:59:09] Information : Running the check: SISFilter
[08.11.2013 14:59:09] Information : Getting the check for the checkId : SISFilter
[08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SISFilter.
[08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SISFilter is absent.
[08.11.2013 14:59:09] Information : Calling the method: CheckSISFilter
[08.11.2013 14:59:09] Information : Detect if SIS Service is running.
[08.11.2013 14:59:09] Information : Detect if SIS Filter service SIS is running.
[08.11.2013 14:59:09] Information : SIS Service SIS is running on this system.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SISFilter and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = MSIVersion
[08.11.2013 14:59:09] Information : Running the check: MSIVersion
[08.11.2013 14:59:09] Information : Getting the check for the checkId : MSIVersion
[08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\MSIVersion.
[08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\MSIVersion is absent.
[08.11.2013 14:59:09] Information : Calling the method: CheckMSIVersion
[08.11.2013 14:59:09] Information : Check the version of Windows Installer on the machine.
[08.11.2013 14:59:09] Data : Version of Windows Installer on the machine = 5.0.7601.17807
[08.11.2013 14:59:09] Data : Required version of Windows Installer = 4.5.6001.18000
[08.11.2013 14:59:09] Information : Windows Installer correct version is detected.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MSIVersion and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = RebootRequired
[08.11.2013 14:59:09] Information : Running the check: RebootRequired
[08.11.2013 14:59:09] Information : Getting the check for the checkId : RebootRequired
[08.11.2013 14:59:09] Information : Calling the method: CheckRebootRequired
[08.11.2013 14:59:09] Information : Check if reboot is required.
[08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
[08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
[08.11.2013 14:59:09] Information : Reboot is not required.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RebootRequired and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = SQLServerTools
[08.11.2013 14:59:09] Information : Running the check: SQLServerTools
[08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServerTools
[08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerTools
[08.11.2013 14:59:09] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
[08.11.2013 14:59:09] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerTools and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = SQLServer
[08.11.2013 14:59:09] Information : Running the check: SQLServer
[08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServer
[08.11.2013 14:59:09] Information : Calling the method: CheckSqlServer
[08.11.2013 14:59:09] Information : Check if SQL Server 2008 R2 SP2 is installed.
[08.11.2013 14:59:09] Information : Query WMI provider for SQL Server 2008.
[08.11.2013 14:59:09] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
[08.11.2013 14:59:09] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServer and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = ReportingServer
[08.11.2013 14:59:09] Information : Running the check: ReportingServer
[08.11.2013 14:59:09] Information : Getting the check for the checkId : ReportingServer
[08.11.2013 14:59:09] Information : Calling the method: CheckReportingServer
[08.11.2013 14:59:09] Information : Check if Reporting Server 2008 R2 SP2 is installed.
[08.11.2013 14:59:09] Information : Query WMI provider for Reporting Server 2008 R2 SP2.
[08.11.2013 14:59:09] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11 for query: SELECT * FROM MSReportServer_Instance WHERE InstanceName='DPM'
[08.11.2013 14:59:09] Information : Reporting Server 2008 R2 SP2 instance DPM is present on this system.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ReportingServer and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = SQLAgentService
[08.11.2013 14:59:09] Information : Running the check: SQLAgentService
[08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLAgentService
[08.11.2013 14:59:09] Information : Calling the method: CheckSqlAgentServiceConfig
[08.11.2013 14:59:09] Information : Check SQL Server Agent service configuration.
[08.11.2013 14:59:09] Data : SQL Server instance name = DPM
[08.11.2013 14:59:09] Information : Querying WMI Namespace:
\\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='SQLAgent$DPM'
[08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
[08.11.2013 14:59:09] Information : SQL Server Agent service configuration is correct.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlAgentService and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = SQLServerService
[08.11.2013 14:59:09] Information : Running the check: SQLServerService
[08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServerService
[08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerServiceConfig
[08.11.2013 14:59:09] Information : Check SQL Server service configuration.
[08.11.2013 14:59:09] Data : SQL Server instance name = DPM
[08.11.2013 14:59:09] Information : Querying WMI Namespace:
\\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM'
[08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
[08.11.2013 14:59:09] Information : SQL Server service configuration is correct.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerService and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = SqlServerReportingServices
[08.11.2013 14:59:09] Information : Running the check: SqlServerReportingServices
[08.11.2013 14:59:09] Information : Getting the check for the checkId : SqlServerReportingServices
[08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices.
[08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices is absent.
[08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerReportingServices
[08.11.2013 14:59:09] Information : Check if SQL Server 2008 Reporting Services is installed.
[08.11.2013 14:59:09] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[08.11.2013 14:59:09] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
[08.11.2013 14:59:09] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerReportingServices and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = SqlReportServerService
[08.11.2013 14:59:09] Information : Running the check: SqlReportServerService
[08.11.2013 14:59:09] Information : Getting the check for the checkId : SqlReportServerService
[08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService.
[08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService is absent.
[08.11.2013 14:59:09] Information : Calling the method: CheckRosettaServicesConfig
[08.11.2013 14:59:09] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[08.11.2013 14:59:09] Information : Querying WMI Namespace:
\\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='ReportServer$DPM'
[08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
[08.11.2013 14:59:09] Information : Report Server service configuration is correct.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlReportServerService and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = ActiveDirectory
[08.11.2013 14:59:09] Information : Running the check: ActiveDirectory
[08.11.2013 14:59:09] Information : Getting the check for the checkId : ActiveDirectory
[08.11.2013 14:59:09] Information : Calling the method: DetectActiveDirectory
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ActiveDirectory and result: 0[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = SQLEval
[08.11.2013 14:59:09] Information : Running the check: SQLEval
[08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLEval
[08.11.2013 14:59:09] Information : Calling the method: DetectSqlEval
[08.11.2013 14:59:09] Information : Detect if SQL Server is evaluation edition
[08.11.2013 14:59:09] Information : Starting service
[08.11.2013 14:59:09] Data : Service name = MSSQL$DPM
[08.11.2013 14:59:09] Data : Current status of service = Running
[08.11.2013 14:59:09] Information : Service is already running
[08.11.2013 14:59:09] Data : Edition = Standard Edition (64-bit)
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlEval and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = ClientTCPEnabled
[08.11.2013 14:59:09] Information : Running the check: ClientTCPEnabled
[08.11.2013 14:59:09] Information : Getting the check for the checkId : ClientTCPEnabled
[08.11.2013 14:59:09] Information : Calling the method: CheckIfClientTCPEnabled
[08.11.2013 14:59:09] Information : Check if SQL Server has DPM Server already installed on it.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ClientTCPEnabled and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = RemoteDbDPMInstalled
[08.11.2013 14:59:09] Information : Running the check: RemoteDbDPMInstalled
[08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbDPMInstalled
[08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbDPMInstalled
[08.11.2013 14:59:09] Information : Check if SQL Server has DPM Server already installed on it.
[08.11.2013 14:59:09] Information : The SQL and DPM machine are same so not checking for DPM installed
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbDPMInstalled and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = ReportingSecureConnectionLevel
[08.11.2013 14:59:09] Information : Running the check: ReportingSecureConnectionLevel
[08.11.2013 14:59:09] Information : Getting the check for the checkId : ReportingSecureConnectionLevel
[08.11.2013 14:59:09] Information : Calling the method: CheckReportingSecureConnectionLevel
[08.11.2013 14:59:09] Information : Check Reporting SecureConnectionLevel.
[08.11.2013 14:59:09] Information : Getting the reporting secure connection level for SERVERDPM/DPM
[08.11.2013 14:59:09] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
[08.11.2013 14:59:09] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
[08.11.2013 14:59:09] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ReportingSecureConnectionLevel and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = RemoteDbDiskSpace
[08.11.2013 14:59:09] Information : Running the check: RemoteDbDiskSpace
[08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbDiskSpace
[08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbDiskSpace
[08.11.2013 14:59:09] Information : Check the disk space for remote database.
[08.11.2013 14:59:09] Information : Querying WMI Namespace:
\\SERVERDPM\root\cimv2 for query: select FreeSpace from Win32_LogicalDisk where DeviceID='C:'
[08.11.2013 14:59:09] Information : Remote DB disk space required : 900 MB disk space available = 191786 MB
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbDiskSpace and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = RemoteDbTCP
[08.11.2013 14:59:09] Information : Running the check: RemoteDbTCP
[08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbTCP
[08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbTCP
[08.11.2013 14:59:09] Information : Check the Named Pipes protocol for remote database.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbTCP and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Data : checkId = RemoteDbMsi
[08.11.2013 14:59:09] Information : Running the check: RemoteDbMsi
[08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbMsi
[08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbMsi
[08.11.2013 14:59:09] Information : Check whether the remote DB msi has been installed.
[08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbMsi and result: 0
[08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
[08.11.2013 14:59:09] Data : Result = 0
[08.11.2013 14:59:09] Information : Getting the string form of report object
[08.11.2013 14:59:09] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[08.11.2013 14:59:09] Information : End Inspect.
[08.11.2013 14:59:09] Information : **************************************************************************************
[08.11.2013 14:59:10] Information : Instantiating inspect component.
[08.11.2013 14:59:10] Data : Path of output xml = \PostInstallInspect.xml
[08.11.2013 14:59:10] Information : Deserializing the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
[08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
[08.11.2013 14:59:10] Information : Deserialising the scenario XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
[08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
[08.11.2013 14:59:10] Information : Getting scenarios for the product: DPM
[08.11.2013 14:59:10] Information : Getting scenarios for DPM
[08.11.2013 14:59:10] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
[08.11.2013 14:59:10] Information : Query WMI provider for SQL Server 2008.
[08.11.2013 14:59:10] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
[08.11.2013 14:59:10] Information : SQL Server 2008 R2 SP2 instance DPM is not present on this system.
[08.11.2013 14:59:10] Information : Query WMI provider for SQL Server 2008.
[08.11.2013 14:59:10] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
[08.11.2013 14:59:10] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
[08.11.2013 14:59:10] Information : Inspect context initialized with
SQL Server namespace:
\\{0}\root\Microsoft\SqlServer\ComputerManagement11
Reporting namespace:
\\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
SqlServerDetected: True
[08.11.2013 14:59:10] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
[08.11.2013 14:59:10] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
[08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServer
[08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServerReportingServices
[08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServerTools
[08.11.2013 14:59:10] Information : Getting the installables which were not detected
[08.11.2013 14:59:10] Information : Getting the string form of report object
[08.11.2013 14:59:10] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[08.11.2013 14:59:10] Information : Getting the falures while performing checks
[08.11.2013 14:59:10] Information : Getting the error results
[08.11.2013 14:59:10] Information : Getting the warning results
[08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[08.11.2013 14:59:10] Information : Getting the falures while performing checks
[08.11.2013 14:59:10] Information : Getting the error results
[08.11.2013 14:59:10] Information : Getting the warning results
[08.11.2013 14:59:10] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[08.11.2013 14:59:10] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
[08.11.2013 14:59:10] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
[08.11.2013 14:59:12] Information : <<< Dialog >>> Inspect Page : Leaving
[08.11.2013 14:59:12] Information : <<< Dialog >>> User Information Page : Entering
[08.11.2013 14:59:26] Information : <<< Dialog >>> User Information Page : Leaving
[08.11.2013 14:59:26] Information : <<< Dialog >>> Install location Page : Entered
[08.11.2013 14:59:26] Information : Check if the media is removable
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:26] Data : Drive Name = C:\
[08.11.2013 14:59:26] Data : Drive Type = 3
[08.11.2013 14:59:26] Information : Check attributes of the directory
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:26] Data : File Attributes = Directory
[08.11.2013 14:59:26] Information : Query free disk space
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:26] Data : Free Space = 191786
[08.11.2013 14:59:26] Information : Query free disk space
[08.11.2013 14:59:26] Data : Folder Path = C:\Windows\system32
[08.11.2013 14:59:26] Data : Free Space = 191786
[08.11.2013 14:59:26] Information : Check if the media is removable
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:26] Data : Drive Name = C:\
[08.11.2013 14:59:26] Data : Drive Type = 3
[08.11.2013 14:59:26] Information : Check attributes of the directory
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:26] Data : File Attributes = Directory
[08.11.2013 14:59:26] Information : Query free disk space
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:26] Data : Free Space = 191786
[08.11.2013 14:59:26] Information : Query free disk space
[08.11.2013 14:59:26] Data : Folder Path = C:\Windows\system32
[08.11.2013 14:59:26] Data : Free Space = 191786
[08.11.2013 14:59:26] Information : Check if the media is removable
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:59:26] Data : Drive Name = C:\
[08.11.2013 14:59:26] Data : Drive Type = 3
[08.11.2013 14:59:26] Information : Check attributes of the directory
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:59:26] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:59:26] Information : Query free disk space
[08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:59:26] Data : Free Space = 191786
[08.11.2013 14:59:26] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
[08.11.2013 14:59:45] Information : Check if the media is removable
[08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:45] Data : Drive Name = C:\
[08.11.2013 14:59:45] Data : Drive Type = 3
[08.11.2013 14:59:45] Information : Check attributes of the directory
[08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:45] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
2012 R2\DPM'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:59:45] Information : Query free disk space
[08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:45] Data : Free Space = 191786
[08.11.2013 14:59:45] Information : Query free disk space
[08.11.2013 14:59:45] Data : Folder Path = C:\Windows\system32
[08.11.2013 14:59:45] Data : Free Space = 191786
[08.11.2013 14:59:52] Information : Check if the media is removable
[08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:52] Data : Drive Name = C:\
[08.11.2013 14:59:52] Data : Drive Type = 3
[08.11.2013 14:59:52] Information : Check attributes of the directory
[08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:52] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
2012 R2\DPM'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:59:52] Information : Query free disk space
[08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:52] Data : Free Space = 191786
[08.11.2013 14:59:52] Information : Query free disk space
[08.11.2013 14:59:52] Data : Folder Path = C:\Windows\system32
[08.11.2013 14:59:52] Data : Free Space = 191786
[08.11.2013 14:59:56] Information : Check if the media is removable
[08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:56] Data : Drive Name = C:\
[08.11.2013 14:59:56] Data : Drive Type = 3
[08.11.2013 14:59:56] Information : Check attributes of the directory
[08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:56] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
2012 R2\DPM'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:59:56] Information : Check if the media is removable
[08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:59:56] Data : Drive Name = C:\
[08.11.2013 14:59:56] Data : Drive Type = 3
[08.11.2013 14:59:56] Information : Check attributes of the directory
[08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:59:56] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 14:59:56] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
[08.11.2013 14:59:56] * Exception : => The path C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM exceeds 64 characters.Choose a path with a shorter length.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.ValidateErrors(String binaryInstallLocation, String databaseLocation, String rosettaInstallLocation, String sqlInstance, Boolean isDatabaseDetected, Boolean installingSql,
UInt64 requiredDataDiskSpace)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.CheckInstallAndDatabaseLocation()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.OnLeavePage(LeavePageEventArgs e)
*** Mojito error was: PathTooLong; 0; None
[08.11.2013 14:59:59] Data : Location of program files = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
[08.11.2013 14:59:59] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 14:59:59] Information : <<< Dialog >>> Install location Page : Leaving
[08.11.2013 15:00:11] Information : Check if the media is removable
[08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:11] Data : Drive Name = C:\
[08.11.2013 15:00:11] Data : Drive Type = 3
[08.11.2013 15:00:11] Information : Check attributes of the directory
[08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:11] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 15:00:11] Information : Query free disk space
[08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:11] Data : Free Space = 191786
[08.11.2013 15:00:11] Information : Query free disk space
[08.11.2013 15:00:11] Data : Folder Path = C:\Windows\system32
[08.11.2013 15:00:11] Data : Free Space = 191786
[08.11.2013 15:00:12] Information : Check if the media is removable
[08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:12] Data : Drive Name = C:\
[08.11.2013 15:00:12] Data : Drive Type = 3
[08.11.2013 15:00:12] Information : Check attributes of the directory
[08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:12] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 15:00:12] Information : Check if the media is removable
[08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:12] Data : Drive Name = C:\
[08.11.2013 15:00:12] Data : Drive Type = 3
[08.11.2013 15:00:12] Information : Check attributes of the directory
[08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:12] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 15:00:12] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
[08.11.2013 15:00:12] * Exception : => The path C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM exceeds 64 characters.Choose a path with a shorter length.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.ValidateErrors(String binaryInstallLocation, String databaseLocation, String rosettaInstallLocation, String sqlInstance, Boolean isDatabaseDetected, Boolean installingSql,
UInt64 requiredDataDiskSpace)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.CheckInstallAndDatabaseLocation()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.OnLeavePage(LeavePageEventArgs e)
*** Mojito error was: PathTooLong; 0; None
[08.11.2013 15:00:22] Data : Location of program files = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:22] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:22] Information : <<< Dialog >>> Install location Page : Leaving
[08.11.2013 15:00:31] Information : Check if the media is removable
[08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:31] Data : Drive Name = C:\
[08.11.2013 15:00:31] Data : Drive Type = 3
[08.11.2013 15:00:31] Information : Check attributes of the directory
[08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:31] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 15:00:31] Information : Query free disk space
[08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:31] Data : Free Space = 191786
[08.11.2013 15:00:31] Information : Query free disk space
[08.11.2013 15:00:31] Data : Folder Path = C:\Windows\system32
[08.11.2013 15:00:31] Data : Free Space = 191786
[08.11.2013 15:00:33] Information : Check if the media is removable
[08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:33] Data : Drive Name = C:\
[08.11.2013 15:00:33] Data : Drive Type = 3
[08.11.2013 15:00:33] Information : Check attributes of the directory
[08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:33] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 15:00:33] Information : Check if the media is removable
[08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:33] Data : Drive Name = C:\
[08.11.2013 15:00:33] Data : Drive Type = 3
[08.11.2013 15:00:33] Information : Check attributes of the directory
[08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:33] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[08.11.2013 15:00:33] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
[08.11.2013 15:00:33] Information : Check the filesystem on which DPM and prerequisites are installed
[08.11.2013 15:00:33] Information : C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:33] Information : C:\Windows\system32
[08.11.2013 15:00:33] Information : Query free disk space
[08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:33] Data : Free Space = 191786
[08.11.2013 15:00:33] Information : Query free disk space
[08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:33] Data : Free Space = 191786
[08.11.2013 15:00:33] Information : Query free disk space
[08.11.2013 15:00:33] Data : Folder Path = C:\Windows\system32
[08.11.2013 15:00:33] Data : Free Space = 191786
[08.11.2013 15:00:33] Data : Location of program files = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:33] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:33] Information : <<< Dialog >>> Install location Page : Leaving
[08.11.2013 15:00:38] Information : <<< Dialog >>> Commit Page : Entering
[08.11.2013 15:00:38] Data : An instance of SQL Server to be used to create database = DPM
[08.11.2013 15:00:38] Data : Target directory for installation = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:38] Data : Physical location of database = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:39] Information : <<< Dialog >>> Commit Page : Leaving
[08.11.2013 15:00:39] Information : **************************************************************************************
[08.11.2013 15:00:39] Information : Log setup inputs =>
[08.11.2013 15:00:39] Data : ProgramFiles = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
[08.11.2013 15:00:39] Data : UIProgramFiles = C:\Program Files\Microsoft Data Protection Manager
[08.11.2013 15:00:39] Data : DatabaseFiles = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[08.11.2013 15:00:39] Data : IntegratedInstallSource = C:\_SOURCE\_SC2012R2\SCDPM\
[08.11.2013 15:00:39] Data : SqmOptIn = 2
[08.11.2013 15:00:39] Information : **************************************************************************************
[08.11.2013 15:00:39] Information : <<< Dialog >>> Progress Page : Entering
[08.11.2013 15:00:39] Information : Function >> MsiSetInternalUI
[08.11.2013 15:00:39] Information : MsiSetInternalUI returned INSTALLUILEVEL_DEFAULT
[08.11.2013 15:00:39] Information : Function >> MsiSetExternalUI
[08.11.2013 15:00:39] Data : Path of main msi = C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\msi\msdpm.msi
[08.11.2013 15:00:39] Data : Path of log file = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\DpmSetup.log
[08.11.2013 15:00:39] Information : Getting the string form of report object
[08.11.2013 15:00:39] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[08.11.2013 15:00:39] Information : Getting the reporting secure connection level for SERVERDPM/DPM
[08.11.2013 15:00:39] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
[08.11.2013 15:00:39] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
[08.11.2013 15:00:39] Information : Present Secure Connection Level:0
[08.11.2013 15:00:39] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[08.11.2013 15:00:39] Information : Querying WMI Namespace:
\\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
[08.11.2013 15:00:39] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
[08.11.2013 15:00:39] Information : **************************************************************************************
[08.11.2013 15:00:39] Information : Deploy reports
[08.11.2013 15:00:39] Data : Path of configuration file of SQL Server Reporting Services =
\\SERVERDPM\C$\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
[08.11.2013 15:00:39] Information : Starting Service:ReportServer$DPM on machine:SERVERDPM flag restart:True
[08.11.2013 15:00:54] Information : Starting Service:ReportServer$DPM on machine:SERVERDPM flag restart:True
[08.11.2013 15:01:09] Data : Source folder for reports (.rdl files) = C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\DpmReports
[08.11.2013 15:01:09] *** Error : CurrentDomain_UnhandledException
The OS self is patched on the latest updates, SQL too...
Can anyone give me a hint, this drives me crazy :(
Thank you for any help
Volkan -
Unable to Install JRUN 4 Updater 7 on windows server 2008 64 bit machine
Please help us on the error while installing jrun4, updater 7 on Microsoft Windows Server 2008 R2 Enterprise 64 bit operating system
The JVM installed on the machine is 32 bit.
I installed jrun on the machine successfully. When I try to add a web server using the web server configuration tool.
I get the below fatal windows error.
Windows package manager
Operation failed with 0x8007000B
An attempt was made to load a program with an incorrect format.
Please help....Hi Charlie,
64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
I hope this was helpful. -
Unable to install iTunes 10.5.1 on WIN 7 Pro
Guys, im unable to install the latest iTunes on my laptop. It keeps telling me that
"There is a problem with this Windoes Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I was frustrated by that and i uninstalled the iTunes 10.4.1.10. Now that i can't install iTunes that i downloaded from apple.com.
What can i do next?Hi Joe, my windows is always up to date. I resolved the issue. It was the apple auto update service that corrupted all apple services. i went into the registry to remove everything related to apple and reinstalled a fresh copy..
Maybe you are looking for
-
Setting User Preferences With Javascript In Acrobat X
Hi All, Is there a way thru Javascript to programatically set a value in the User Preferences? I am trying to create a batch sequence that exports PDFs to HTMLs. In the Acrobat X preferences, there is a conversion option that sets the option of "Run
-
Hi all, Potentially an easy question for you. Is there an access right object to avoid that users can delete document/links out of the structure and to move Folders? Thanks for your help Thomas
-
Advise for adding larger internal hard drive & faster processor
After five years it is time to make some upgrades to my G4 Quicksilver 733 MHz Tower. The hard drive is nearly full and the processor doesn't seem as fast as it once did (especially after using my faster PowerBook G4). I want to replace the 40GB hard
-
Is there a way to recieve a facetime call on my powerbook? (have the iphone 3g without facetime)
-
3D ground plane grid not visible in CC 2014.0.0
Hi, i am a Creative Cloud member and since the 2014.0.0 CC version, i am not able to show anymore the 3D ground plane grid. I use a MacBook Pro Retina (Half 2012), with a NVIDIA GeForce GT 650M (1024 Mo) and OS X 10.9.4. Regards.