Unable to install GPIB USB hs controller on Windows 8

When I try to install the GPIB USB HS controller on my laptop, which has Windows 8 64 bit, the installation does not work. Every thin goes smooth until the progress windows then nothing happen even if I wait for ages. When I used the same CD on the desktop, which has W7 32 bit, I managed to install the driver. According to the datasheet the controller is compatible with W8 but not sure 32 or 64. Do you think this is the issue or there is something else going wrong?

Did you check your uac settings?
We found out that with default uac settings in win7 64 bit the install does not work.
In the line you can type in win7 (I'm not sure about 8) uac and press enter.
Then check the user access settings and make sure they are as low as possible
greetings from the Netherlands

Similar Messages

  • Does GPIB-USB-B controller not recognize device Aliases in Instrument I/O Asst express VI ?

    Hi everyone,
     I'm currently having problems with my device. I'm trying to communicate with the instrument simulator through the Instrument I/O express VI but the device alias I designated wasn't being recognized. After selecting the Alias from the pulldown menu and tried the "query and parse" command, there was no response. The "write" and the "read" commands also did not work. I'm suspecting that the problem is from my GPIB-USB controller card. I have the GPIB-USB-B controller. It recognizes only the instrument descriptor but not the alias. My NI 488.2 is of the 2.46 version and NI VISA is v4.2. I think everthing was configured correctly but the card might be the problem. Does anyone know how to fix this problem?. Is there some kind of driver upgrade that could help rectify it.
    Thanks

    Aliases have nothing to do with GPIB controllers and their software though if you cannot communicate to the instrument in MAX, then there might be problem with either one. Aliases are part of VISA. You can try upgrading to 4.5. Also search your entire pc for a file called visaconf.ini. Post back with the location and whether you found more than one instance. You can also try deleting the file and then go into MAX and do a refresh. You will have to recreate all aliases.
    I am confused about something. Are you saying that if you use something like GPIB0::address::INSTR, communication works just fine but the exact same command with an alias does not work? If that's the case, there is nothing wrong with the GPIB controller. If that is not what you mean, then what does it mean when you say 'it only the instrument descriptor'? Another test of the gPIB controller is to use MAX to communicate with the instrument. Do not select VISA for communication. Just right click on it in MAX. This does not use VISA at all and if it works, then the controller and software are just fine.

  • Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

    I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
    I have uninstalled ADDC but i still can't login on SQL server 2008r2.
    please help me. it  is very very disaster!
    I think is loss account SQL server 2008r2!

    Hello,
    I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
    Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
    You cannot run SQL Server services on a domain controller under a local service account or a network service account.
    After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
    After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
    SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
    SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
    On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
    So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
    Regards,
    Elvis Long
    TechNet Community Support

  • Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

    Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise 
    Standalone installer available here
    http://www.microsoft.com/en-us/download/details.aspx?id=28972
    fails with error code 0x80004005
    Is this because my installation has issues, or would the admin pack files be updated for RTM?
    Thank you in advance for any insight

    Found the solution here:
    http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
    Workaround:
    Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
    Extract the .msu file with a tool such as 7-Zip.
    Open an Admin command prompt and change directory to where you extracted the .msu.
    Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
    Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
    Use the tools as per usual.

  • Unable to install itunes for new computer with windows 8

    unable to install itunes for new computer with windows 8
    states this app unable to run on this PC

    Hello jgrn76,
    It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    If issues persist when trying to install it, I would try running through the steps in the article named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Otherwise, would you mind elaborating a bit on what the error message says, word for word?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Unable to instal VOX USB 2.0 drivers in WINDOWS XP Prof. SP2

    Hi,
    I am unable to instal drivers in Windows XP Prof. SP2 for VOX USB 2.0. When I instal drivers from manufacturer's CD, instalation tells me, that it cannot instal some update for XP SP1. But I have SP2, so it should be OK. Then, after computer restart, I connected VOX and windows could not recognize it and asked me for drivers. I tried to instal drivers manually from the cd, but windows always tells me, that it cannot find driver on CD. I tried to download latest drivers from MSI website, but I had the same problem with it. What should I do? I am unable to use the TV tuner 
    Could anybody write me exact procedure how to instal it, please please!
    Thank You very much.
    (I have tried to instal it on another computer with Windows XP Prof. SP2 and it did not work also. The same problem.)

    Yes, my system has USB 2.0. It is P4 2.4GHz Northwood, motherboard: MSI 648 Max, 1GB of DDRAM (333MHz), MSI GeForce 4 MX 460, SoundBlaster Live! player 1024, pci card with aditional USB 2.0 ports (NEC chipset), SIS 900 pci NIC, 2x WesternDigital Caviar 1200JB, pci IDE controller SiliconImage 0680a (harddisks are not connected as RAID), DVD-ROM Pioneer, DVD burner LG GSA-4163B.
    I have tried to connect VOX directly to USB port on motherboard and also to NEC USB pci card, but it did not work anyway.
    I have disconnected all USB devices from the computer, except the mouse.
    Windows is updated from MS Windowsupdate website.  I use Windows XP SP2 firewall and Microsoft Antispyware beta and antivirus software (I have tried to turn them off during the TV VOX installation, but it did not help).
    And I  also use power supply for TV VOX.

  • Unable to install the USB internet modem?

    I would like to use internet USB modem, when i plug in it is not reading and unable to install. but the same i can use very well in windows computer. Need help on installing the modem.

    You will have to contact and discuss your issue with the technical support unit of your provider.  Bimmer 7 Seriers makes an excellent point.  I too had to revert to Lion from Mt. Lion due to technical problems with a USB modem.  In my case, the modem cannot run in a 64-Bit environment.  I suspect that is your problem.
    I think that the solution lies with your provider or a different one.  There is nothing more I can do to assist you.
    Ciao.

  • Cant Install updates for Google Play Apps - Error - Unable to install to USB or SD Card.

    I have recently noticing an increase in an error popping up - cant install to USB or SD card. Any one got a solution for that other than jailbreaking or rooting my phone to fix the issue?

        Eolnolatari,
    Sorry to hear you are having trouble with downloading apps. We certainly want you to have the benefits available to you. Are you getting this error message when trying to download any particular types of apps? Normally this app is attributed to movable applications, which is not standard for all Android apps. How much internal and external storage do you have available? If you are low on internal storage that means you may have to delete non-used apps to create space for others. Keep us updated on this and we will make sure we get this all figured out.
    Thank you,
    TonyG_VZW
    Follow us on Twitter @VZWSupport

  • Unable to Install KB 3001652, 2961149. and 2796590 (Windows 2008 R2 Systems Not Connected to the Internet)

    To Anyone That Can Help,
    I'm on a set of WSUS enabled Windows 2008 R2  servers with no network access to the Internet and I am unable to  install the following:
    Update for Microsoft Visual Studio 2010 Tools for Office Runtime
    KB's 300162, KB 2961149. and KB 2796590
    Equally as painful, I am unable to find anything that helps.
    Any ideas...???
    Roderick Lyons

    The above from Don Pick pointed me to the answer!!!!
    1) obtained the actual update files (KB2796590,KB2961149,and KB3001652) from my Infrastructure Team WSUS Administrators (download is also available from Internet)
    2)
    Ran the update, which of course blew an error
    3) Clicked the error log file which gave me the following:
           Summary:Failed with error 0x800B010A (A certificate chain could not be built to a trusted root authority)
           file signature could not be verified
    4)https://support.microsoft.com/en-us/kb/2746268
    5)https://gallery.technet.microsoft.com/Configuring-Trusted-Roots-281be43a#content
    For all supported x64-based versions of Windows Server 2008 R2
    (The file was actually already installed)
    6) Executed the repair from step 4
    7) All updates (KB2796590,KB2961149,and KB3001652) installed without incident!!!
    Thanks All!!!
    Roderick Lyons

  • HT1926 Unable to install iTunes update on pc with Windows 7 x64 bit

    Unable to install iTunes upgrade (11.0.1 on pc running Windows 7 x64 bit. Running old version of iTunes ok.  Have tried opening with new administrator but to no avail. Following download message that 'problems with installation'  and to tray manually.  Same outcome.
    Anybody got any ideas?
    Thanks
    Ian

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Unable to Install JRUN 4 Updater 7 on windows server 2008 64 bit machine

    Please help us on the error while installing jrun4, updater 7 on Microsoft Windows Server 2008 R2 Enterprise 64 bit operating system
    The JVM installed on the machine is 32 bit.
    I installed jrun on the machine successfully. When I try to add a web server using the web server configuration tool.
    I get the below fatal windows error.
    Windows package manager
    Operation failed with 0x8007000B
    An attempt was made to load a program with an incorrect format.
    Please help....

    Hi Charlie,
    64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
    I hope this was helpful.

  • I am unable to install Itunes 10.6 on my windows vista 64. What do I need to do to be able to install?

    How can I install Itunes 10.6 on my windows Vista 64?

    No, but you do at least have to buy Snow Leopard. Whether you can run it depends on what iMac you have:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30.  You can also purchase the code to use to download Lion from the same number.
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57

  • Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

    Dear everyone, 
    We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
    http://support.microsoft.com/kb/2677070
    Thanks,
    Users

    Hi,
    According to this KB article, there are many exceptions where this KB is not applicable.
    Please perform the following steps:
    Expand the “For all supported…” title in the File Information section in the KB article.
    Find Crypt32.dll.mui files on your machine.
    Then compare the file version, file size, data and time with the ones listed in the KB article.
    If there is a match, then this KB doesn’t apply to your machine, which is by design.
    Hope this helps.
    Best Regards,
    Amy Wang

  • Can't Install Enhanced USB Host Controller

    I keep getting these popups each time that I load windows xp that its found some new hardware for the USB 2. The hardware is the Universal Serial Bus Controller. However it does mention Intel 82801EB USB 2 Enhanced Host Controller -24DD. I let it search for the needed drivers but it never finds them or there is something else wrong. I keep getting "An error occurred during installation of the device. The data is invalid". Whatever in the hell that means!!! Any clues? I'm running the 875P Neo board.

    Well the drivers for the other USB drivers were automatically installed when I installed Windows XP. The USB 2 drivers however are not installed for the hardware even though the hardware is recognized. I have the SP1 update installed. Here is what happens: when I load windows this screen comes up:
    http://www.angelfire.com/space2/tmoum/newhrdwr.JPG
    I press next and after a few seconds (takes longer if the MSI CD is in the CD-rom) and this screen comes up:
    http://www.angelfire.com/space2/tmoum/newhrdwr2.JPG
    I'm not sure where the drivers for the device are located so I just let windows search for them but this doesn't seem to work.
    Here is what my Device Manager looks like:
    http://www.angelfire.com/space2/tmoum/Devicemngr.JPG
    When I click on the properties of the Universal Serial Bus Controller this is what I see:
    http://www.angelfire.com/space2/tmoum/USB_contrl1.JPG
    and
    http://www.angelfire.com/space2/tmoum/USB_contrl2.JPG

  • Unable to instal 0202 usb

    I received my emu 0202 usb this afternoon, but it's impossible to instal it
    Thirst i instal it on vista ultimate platform, with a guide that i have find on google, but after reboot:
    "there is no device connected" in the emu audio control pannel
    i have the same probleme when i try to lunch installation on XP.
    The power led flickers during the XP/Vista boot, but it doesn't light after the boot.
    I only connect the USB cable.

    ancor wrote:
    Hello, I have also a problem installing the E-MU 0202 USB
    On the first installation of the driver the InstallShield Application hangup after:
    -Audio Control Panel
    -Audio Drivers
    -0202 Product Documents
    -Systemfiles
    -DirectX Komponents
    were installed.
    I have to kill the Process of the InstallShield (DEMO32.exe) to go on. But after the restart of the System no Device is Listed in the Komboboxes of the E-MU Control Panel.
    I`ve try to uninstall and delete the installed Files and Regestry entrys and try to reinstall by using another USB Port, but the install Shield hangup again???
    Can anybody help me.
    System: XP SP2 / Acer TravelMate290..
    Hi, so you eventually found solution to your problem with the usb 0202?
    I'm experiencing the very same problem and, guess what, with an acer latptop as well, an aspire 2000.
    I've tried pretty much everithing so if you overcame the problem please let me know!
    Cheers
    Marco

Maybe you are looking for