Unable to install Grid on AIX 6L
We're trying to perform the software-only method of getting Grid Control 10.2.0.5 onto our AIX 6L box. The first step is to do a silent install of 10.2.0.1, but the installer immediately bombs out saying that only OS versions 5200 or 5300 are supported.
Has anyone else had any success with this please?
Ah, just found the answer on Metalink - 734069.1;
Cause
Oracle Universal Installer does not continue with installation due to failure in pre-req checks. Pre-req checks were introduced in 10.2.0.4 to check maintenance levels on AIX before proceeding with installation. As per Note 412431.1, Grid Control 10.2.0.4 is certified on AIX 5.2, 5.3 and 6.1.
Solution
To resolve this issue, execute the following steps:
1. Start the Oracle Universal Installer by specifying the ‘ignoreSysPrereqs’ parameter
./runInstaller –ignoreSysPrereqs
2. When the Installer (OUI) displays window advising of "failed pre-reqs", select/check the "failed pre-req" checkbox and click Next to continue. This will ensure the Installer proceeds with installation.
Similar Messages
-
Install Grid Control on Solaris
Hi all,
I am trying to install grid control 10g release 4 onto my database homer.
It bounces back with an error:
==========================================================
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.9
Passed
Checking Temp space: must be greater than 250 MB. Actual 4279 MB Passed
Checking swap space: must be greater than 500 MB. Actual 5542 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY v
ariable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
=============================================================
i have tried searching within the otn & metalink. was not able to find any solutions.
regards
Susan JohnHi Susan
Are you using a X11 emulator like Exceed ?
Or let me know if you are using another X11 emulator.
then try this:
Solution Description
Exceed 6.0.1:
- Run Xconfig (Start->Programs->Exceed->Xconfig)
- Double-Click "Video"
- Set
Server Visual: PseudoColor
- Reset Server as proposed by Xconfig
Exceed 7.1.0:
- Run Xconfig (Start->Programs->Hummingbird Connectivity V7.1->Exceed->Xconfig)
- Double-Click "Screen Definition"
- Set
Server Visual: PseudoColor
- Click OK
- Double-Click "Protocol"
- Uncheck "Use 32 Bits Per Pixel For TrueColor"
- Reset Server as proposed by Xconfig
Otherwise directly on Solaris please control that :
Check if the monitor has minimum 256 color.
Run the following command from the Operating System command line
COLOR=`/usr/openwin/bin/xwininfo -root 2>&1`
if [ `echo $COLOR | grep -i depth | awk '$2>=8 {print "good"}' | grep -c "good" ` -ge 1 ]
then
echo "Adequate"
elif test -z "$DISPLAY"
then
echo "DISPLAY is not set"
elif [ `echo $COLOR | grep unable | wc -l` -ge 1 ]
then
echo "Cannot open DISPLAY"
else
echo "Need at least 256 colors"
fi
Edited by: Hub on Oct 29, 2008 11:50 PM
Are you able to use
/usr/openwin/bin/xdpyinfo
what's the result of that command?
Are you able to open xterm or xclock without any issues?
Edited by: Hub on Oct 30, 2008 12:00 AM -
TS3230 I am unable to install Adobe Flash and Java. Safari quits unexpectedly. Please Help
Please help. I am unable to install Adobe flash & Java in my system
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Run root.sh failed after install grid
i installed grid,and run root.sh to configure the cluster,it took more than 12 hours,finally get the fail report
anybody can help?
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /opt/oracle/app/11.2.0/grid
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-05-18 23:42:50: Parsing the host name
2011-05-18 23:42:50: Checking for super user privileges
2011-05-18 23:42:50: User has super user privileges
Using configuration parameter file: /opt/oracle/app/11.2.0/grid/crs/install/crsc
onfig_params
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
ADVM/ACFS is not supported on centos-release-5-6.el5.centos.1
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1-pub'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1-pub'
CRS-2676: Start of 'ora.mdnsd' on 'rac1-pub' succeeded
CRS-2676: Start of 'ora.gipcd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1-pub'
CRS-2676: Start of 'ora.gpnpd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1-pub'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1-pub'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1-pub'
CRS-2676: Start of 'ora.diskmon' on 'rac1-pub' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1-pub'
CRS-2676: Start of 'ora.ctssd' on 'rac1-pub' succeeded
ASM created and started successfully.
DiskGroup MyDG created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac1-pub'
CRS-2676: Start of 'ora.crsd' on 'rac1-pub' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 83a7a20dc30f4f62bf5fc4e4a7a18567.
Successful addition of voting disk a8df71f68dbf4f22bf09f68aaa04de47.
Successful addition of voting disk 60cec6ca14524fdabf777568d967b5d4.
Successfully replaced voting disk group with +MyDG.
CRS-4256: Updating the profile
Failed to update the profile with the new discovery string
CRS-4000: Command Replace failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl replace votedisk +MyDG
Voting file add failed
Unable to communicate with the Cluster Synchronization Services daemon.
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.ctssd -init
Stop of resource "ora.ctssd -init" failed
Failed to stop OCTSSD
Initial cluster configuration failed. See /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log for details
=======================
and infor from /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log
2011-05-18 23:43:17: Registering ohasd
2011-05-18 23:43:17: init file = /opt/oracle/app/11.2.0/grid/crs/init/init.ohasd
2011-05-18 23:43:17: Copying file /opt/oracle/app/11.2.0/grid/crs/init/init.ohasd to /etc/init.d directory
2011-05-18 23:43:17: Setting init.ohasd permission in /etc/init.d directory
2011-05-18 23:43:17: init file = /opt/oracle/app/11.2.0/grid/crs/init/ohasd
2011-05-18 23:43:17: Copying file /opt/oracle/app/11.2.0/grid/crs/init/ohasd to /etc/init.d directory
2011-05-18 23:43:17: Setting ohasd permission in /etc/init.d directory
2011-05-18 23:43:17: Removing "/etc/rc.d/rc3.d/S96ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc3.d/S96ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc5.d/S96ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc5.d/S96ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc0.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc0.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc1.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc1.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc2.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc2.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc4.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc4.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc6.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc6.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: The file ohasd has been successfully linked to the RC directories
2011-05-18 23:43:17: Starting ohasd
2011-05-18 23:43:17: itab entries=
2011-05-18 23:43:22: Created backup /etc/inittab.no_crs
2011-05-18 23:43:22: Appending to /etc/inittab.tmp:
2011-05-18 23:43:22: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2011-05-18 23:43:22: Done updating /etc/inittab.tmp
2011-05-18 23:43:22: Saved /etc/inittab.crs
2011-05-18 23:43:22: Installed new /etc/inittab
2011-05-18 23:43:27: ohasd is starting
2011-05-18 23:43:27: Checking ohasd
2011-05-18 23:43:27: ohasd started successfully
2011-05-18 23:43:27: Creating CRS resources and dependencies
2011-05-18 23:43:27: Configuring HASD
2011-05-18 23:43:27: Registering type ora.daemon.type
2011-05-18 23:43:28: Registering type ora.mdns.type
2011-05-18 23:43:28: Registering type ora.gpnp.type
2011-05-18 23:43:29: Registering type ora.gipc.type
2011-05-18 23:43:29: Registering type ora.cssd.type
2011-05-18 23:43:30: Registering type ora.cssdmonitor.type
2011-05-18 23:43:30: Registering type ora.crs.type
2011-05-18 23:43:31: Registering type ora.evm.type
2011-05-18 23:43:31: Registering type ora.ctss.type
2011-05-18 23:43:31: Registering type ora.asm.type
2011-05-18 23:43:32: Registering type ora.drivers.acfs.type
2011-05-18 23:43:32: Registering type ora.diskmon.type
2011-05-18 23:43:35: ADVM/ACFS is not supported on centos-release-5-6.el5.centos.1
2011-05-18 23:43:35: ADVM/ACFS is not configured
2011-05-18 23:43:35: Successfully created CRS resources for cluster daemon and ASM
2011-05-18 23:43:35: Checking if initial configuration has been performed
2011-05-18 23:43:35: Starting CSS in exclusive mode
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.gipcd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.mdnsd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2676: Start of 'ora.gipcd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.gpnpd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.cssdmonitor' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.cssd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.diskmon' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.diskmon' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2676: Start of 'ora.cssd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: Querying for existing CSS voting disks
2011-05-18 23:44:13: Performing initial configuration for cluster
2011-05-18 23:44:14: Start of resource "ora.ctssd -init" Succeeded
2011-05-18 23:44:15: Configuring ASM via ASMCA
2011-05-18 23:44:15: Executing as grid: /opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM
2011-05-18 23:44:15: Running as user grid: /opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM
2011-05-18 23:44:15: Invoking "/opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM" as user "grid"
2011-05-18 23:47:27: Creating or upgrading OCR keys
2011-05-18 23:47:46: OCR keys are successfully populated
2011-05-18 23:47:46: Invalidating repository location for Oracle 9i deployments
2011-05-18 23:47:46: Executing clscfg
2011-05-18 23:47:53: Oracle Cluster Registry initialization completed
2011-05-18 23:47:59: Start of resource "ora.crsd -init" Succeeded
2011-05-18 23:47:59: Creating voting files
2011-05-18 23:47:59: Creating voting files in ASM diskgroup MyDG
2011-05-18 23:47:59: Executing crsctl replace votedisk +MyDG
2011-05-19 11:04:19: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl replace votedisk +MyDG
2011-05-19 11:20:24: Voting file add failed
2011-05-19 11:54:33: Exiting exclusive mode
2011-05-19 12:11:11: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
2011-05-19 12:13:15: Stop of resource "ora.crsd -init" failed
2011-05-19 12:15:12: Failed to stop CRSD
2011-05-19 12:20:52: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
2011-05-19 12:20:55: Stop of resource "ora.asm -init" failed
2011-05-19 12:20:55: Failed to stop ASM
2011-05-19 12:23:59: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.ctssd -init
2011-05-19 12:24:05: Stop of resource "ora.ctssd -init" failed
2011-05-19 12:24:05: Failed to stop OCTSSD
2011-05-19 12:36:49: Initial cluster configuration failed. See /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log for detailsHi,
sounds like a security/firewall problem.
Because if during the configuration something is not "acting" it's mostly because packages are not delivered/recieved and "hang" instead of delivering error messages.
To make sure deactivate any firewall, and if this is linux deactivate SE Linux.
Next time please specify version and OS you encounter the error. This would make it easier to help you...
Regards
Sebastian -
Unable to install itunes in windows 7 64 bit - hanging
Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
Also i am unable to uninstall Apple update software. Are these both related.
Now how do i get the software installed( itunes installed in windows 7)Hey gigipramod,
Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64
I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
MSI Log File :-
Property(S): ProductToBeRegistered = 1
MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
Please let me how to install 64 bit package on Win7 64 bit.
Thanks in Advance.Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.
-
Unable to install Cisco Unity Express 8.5.1 on SRE-700
Hi.
I have a cisco 2951 router with SRE-700 module and i want to install CUE on it. My router IP configuration is as follows:
interface GigabitEthernet0/0
ip address 10.200.190.225 255.255.0.0
duplex auto
speed auto
interface SM1/0
ip unnumbered GigabitEthernet0/0
service-module fail-open
service-module ip address 10.200.190.226 255.255.0.0
service-module ip default-gateway 10.200.190.225
ip route 10.200.190.226 255.255.255.255 SM1/0
and i have the following files in my FTP directory. Languages needed English and Arabic
cue-installer.sme.8.5.1
cue-vm-ar_SA-langpack.sme.8.5.1.prt1
cue-vm-en_US-langpack.sme.8.5.1.prt1
cue-vm-full-k9.sme.8.5.1.prt1
cue-vm-installer-k9.sme.8.5.1.prt1
cue-vm-k9.sme.8.5.1.key
cue-vm-k9.sme.8.5.1.pkg
cue-vm-k9.sme.8.5.1.pkg.install.sre
cue-vm-k9.sme.8.5.1.pkg.install.sre.header
cue-vm-langpack.sme.8.5.1.pkg
i enter the following command
service-module sm 1/0 install url ftp://<ip>/cue-vm-k9.sme.8.5.1.pkg
installation starts. last message i got is "service module reset due to an error unable to install"
Can anybody help on this?
RegardsHere is the output while installing CUE
TSC-VM#service-module sm 1/0 install url
*Mar 23 07:26:33.501: %SM_INSTALL-6-INST_RBIP: SM1/0 recei$ule sm 1/0 install url ftp://192.168.231.77/cue-vm-k9.sme.8.5.1.pkg
Proceed with installation? [no]: yes
Loading cue-vm-k9.sme.8.5.1.pkg.install.sre !
[OK - 22313/4096 bytes]
Following languages are available for installation.
# SKU Language Code Language Name
1 ITA it_IT CUE Voicemail Italian
2 ESP es_ES CUE Voicemail European Spanish
3 ENU en_US CUE Voicemail US English
4 FRA fr_FR CUE Voicemail European French
5 ESO es_CO CUE Voicemail Latin American Spanish
6 ESM es_MX CUE Voicemail Mexican Spanish
7 ARA ar_SA CUE Voicemail Arabic
8 NLD nl_NL CUE Voicemail Dutch
9 SVE sv_SE CUE Voicemail Swedish
10 NOR no_NO CUE Voicemail Norwegian
11 FRC fr_CA CUE Voicemail Canadian French
12 PTG pt_PT CUE Voicemail Portuguese
13 TUR tr_TR CUE Voicemail Turkish
14 HUN hu_HU CUE Voicemail Hungarian
15 ENG en_GB CUE Voicemail UK English
16 DEU de_DE CUE Voicemail German
17 DAN da_DK CUE Voicemail Danish
18 PTB pt_BR CUE Voicemail Brazilian Portuguese
19 KOR ko_KR CUE Voicemail Korean
20 CHS zh_CN CUE Voicemail Mandarin Chinese
21 JPN ja_JP CUE Voicemail Japanese
22 RUS ru_RU CUE Voicemail Russian
23 HBR iw_IL CUE Voicemail Hebrew
You can install upto 5 language(s) on this platform.
Please select the language(s) you want to install by entering the language number(s)
Languages can be entered as comma separated or space separated list
Example: 1,3 would select 'Italian' and 'US English'
Enter languages:3, 7
Following languages will be installed on the system:
CUE Voicemail US English
CUE Voicemail Arabic
Do you want to continue with the selected options?(y/n):y
input string: lang=no=2,CUE Voicemail US English,CUE Voicemail Arabic
TSC-VM#
*Mar 23 07:27:03.105: %SM_INSTALL-6-INST_RESET: SM1/0 is reset for software installation.
*Mar 23 07:27:42.493: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
*Mar 23 07:27:42.497: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:27:49.197: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:00.877: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:05.921: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:35.380: Delivery Ack could not be sent due to lack of buffers
*Mar 23 07:28:46.764: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
*Mar 23 07:28:46.904: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Parsing package manifest files ....
*Mar 23 07:28:49.172: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
*Mar 23 07:28:50.012: %SM_INSTALL-6-INST_FAIL: SM1/0 is reset due to Unable to install. Please try again.
TSC-VM#service-module sm 1/0 status
Service Module is Cisco SM1/0
Service Module supports session via TTY line 67
Service Module is trying to recover from error
Service Module heartbeat-reset is enabled
Service Module status is not available
No install/uninstall in progress
My FTP Log is as follows
#Software: Microsoft Internet Information Services 5.1
#Version: 1.0
#Date: 2011-03-23 07:25:44
#Fields: time c-ip cs-method cs-uri-stem sc-status
07:25:44 10.200.190.222 [1]USER anonymous 331
07:25:44 10.200.190.222 [1]PASS [email protected] 230
07:25:46 10.200.190.222 [1]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
07:25:46 10.200.190.222 [1]QUIT - 426
07:25:46 10.200.190.222 [2]USER anonymous 331
07:25:46 10.200.190.222 [2]PASS [email protected] 230
07:25:49 10.200.190.222 [2]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
07:25:49 10.200.190.222 [2]QUIT - 226
07:26:43 10.200.190.222 [3]USER anonymous 331
07:26:43 10.200.190.222 [3]PASS [email protected] 230
07:26:45 10.200.190.222 [3]sent /cue-vm-k9.sme.8.5.1.key 226
07:26:45 10.200.190.222 [3]QUIT - 226
07:26:45 10.200.190.222 [4]USER anonymous 331
07:26:46 10.200.190.222 [4]PASS [email protected] 230
07:26:48 10.200.190.222 [4]sent /cue-vm-k9.sme.8.5.1.key 226
07:26:48 10.200.190.222 [4]QUIT - 226
07:26:50 10.200.190.222 [5]USER anonymous 331
07:26:50 10.200.190.222 [5]PASS [email protected] 230
07:26:52 10.200.190.222 [5]sent /cue-installer.sme.8.5.1 426
07:26:52 10.200.190.222 [5]QUIT - 426
07:26:52 10.200.190.222 [6]USER anonymous 331
07:26:52 10.200.190.222 [6]PASS [email protected] 230
07:27:00 10.200.190.222 [6]sent /cue-installer.sme.8.5.1 226
07:27:00 10.200.190.222 [6]QUIT - 226
07:27:02 10.200.190.222 [7]USER anonymous 331
07:27:02 10.200.190.222 [7]PASS [email protected] 230
07:27:04 10.200.190.222 [7]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
07:27:04 10.200.190.222 [7]QUIT - 226
07:27:04 10.200.190.222 [8]USER anonymous 331
07:27:04 10.200.190.222 [8]PASS [email protected] 230
07:27:06 10.200.190.222 [8]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
07:27:06 10.200.190.222 [8]QUIT - 226
07:27:06 10.200.190.222 [9]USER anonymous 331
07:27:07 10.200.190.222 [9]PASS [email protected] 230
07:27:09 10.200.190.222 [9]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
07:27:09 10.200.190.222 [9]QUIT - 426
07:27:09 10.200.190.222 [10]USER anonymous 331
07:27:10 10.200.190.222 [10]PASS [email protected] 230
07:27:11 10.200.190.222 [10]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
07:27:11 10.200.190.222 [10]QUIT - 226
07:27:47 10.200.190.223 [11]USER anonymous 331
07:27:47 10.200.190.223 [11]PASS [email protected] 230
07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
07:27:47 10.200.190.223 [11]QUIT - 226
07:27:48 10.200.190.223 [12]USER anonymous 331
07:27:48 10.200.190.223 [12]PASS [email protected] 230
07:27:48 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
07:27:49 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
07:27:49 10.200.190.223 [12]QUIT - 226
Please assist -
Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4
Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh -
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
Unable to install SQL server 2000 and 2005 on Satellite A205-s5831
Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response meHi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software -
Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1
Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Unable to install Sql Server 2008 R2 express on windows 2003
Hi,
I am unable to install sql server express edition with management tools, on windows server 2003. During rules check, it gives an error that minimum os version is not supported.
.net framework requirements have been met.
Is there something that I am missing ? Any pointers would be of immense help
thanks
SaagarHello,
Whats is Service Pack edition of Windows 2003 server.As per prerequisites it requires SP2 for windows Server 2003 I guess your server is not updated to latest SP.Please refer below link for hardware and software requirement
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1
I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result: Failed: see details below
Exit code (Decimal): -2068053929
Exit facility code: 1212
Exit error code: 87
Exit message: Failed: see details below
Start time: 2014-03-18 14:59:31
End time: 2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li -
Unable to install Creative Cloud
Hello,
I have an extra seat who needs to use Creative Cloud for his job. He cannot install the Creative Cloud application and when trying to do so afresh, he constantly gets the error "Unable to install Creative Cloud Please close all active Adobe applications and retry your installation" message via the dmg image installer file. There are no other or active Adobe application on his iMac and no Adobe application running anywhere on the machine.
iMac OS X 10.8.5, 2.9GHz.
The problem reoccurs even after navigating to the Applications/Utilities folder and putting the folders Adobe Application Manager folder and Creative Cloud to the Trash and emptying it. Then navigating to the Library/Application Support/Adobe/OOBE folder and renaming it to OOBE.old, then again downloading Creative Cloud desktop from the URL https://creative.adobe.com/products/creative-cloud and trying again to install it.
Despite all of this, the same "Unable to install Creative Cloud Please close all active Adobe applications and retry your installation" message prompt comes up and the installation of the Creative Cloud application is abandoned.
This is a very frustrating experience. What is the workaround to get this appliaction installed so he can get on with his work as soon as possible?
PaulSorry for taking so long but I was unable to access my pc. Now that I've got it here is the screenshot of the error. It's in italian:
It says something like:
"There has been the following errors: a possible problem with Creative Cloud desktop. Download a new copy of Creative Cloud desktop and install it again".
As I said before even downloading it again I get the same file and the same error.
Please let me know if you need any other information.
Thanks
mario
Maybe you are looking for
-
Hi all, I am making a vi where I have to save the selected value from listbox with its respective tab control dropdown selcted values in another listbox.Whenever I select Item1 then the heading change and respective tab will open for that item.But No
-
Error while inserting data into BFILE datatype
Dear Experts, I am trying to insert data into resume table, but it is throwing error: create table resume(resume blob); declare f_lob bfile; b_lob blob; begin insert into resume(resume) values(empty_blob()) return documents into b_lob; f_lob := bfile
-
MacBook Air (2008) screen contents on iMac (2011)
I have a MacBook Air from 2008 and I would like to connect it up to my 2011 iMac so that it displays the contents of my MBA on the iMac's screen. I saw that this is easily achieved with a Thunderbolt cable, but my MBA doesn't have that option: http:/
-
Kinda going round in circles this morning! When I preview in browser the images on my site are there. On uploading the entire site (currently one page!) the images aren't. I'm sure there is a simple solution, but I just can't see it. To view the page
-
TS1398 My ipod touch has no wi-fi in the wi-fi setting how do i get that back ?????
My Ipod touch has no wi-fi in the wi-fi setting. How do i get it back