Unable to install hp deskjet 3845 printer in windows 7

i was unble to install printer on my pc. i tried on windows update it says windows cannot found a driver for your device you can try in manufacturer site. and also i tried in add printer wizard it does not shows my printer model under hp series , what should i do now need help !  see in my screenshot there is no hp deskjet 3845 driver series.. please help me to install my  printer. thank you. 

Hi,Try following these steps to enable automatic updating and check for any difference:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=372330&sw_lang=#N815 If you experience any difficulties, follow the FAQ section and check for any change. Regards,Shlomi

Similar Messages

  • How do i install HP deskjet 3510 printer without the disk to my laptop

    how do i install HP deskjet 3510 printer  without the disk to my laptop 

    Hi,
    You can download from the following link:
       http://h20000.www2.hp.com/bizsupport/TechSupport/P​roductList.jsp?lang=en&cc=us&taskId=135&prodTypeId​...
    Full Feature Software and Drivers is the one you definitely need first.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Deskjet F4100 printer with Windows 7

    I need an update to operate a deskjet F4100 printer with Windows 7

    honyok,
    That is a simple question, and easy to solve. Here is the link to that series.
    http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
    1) Select the exact model
    2) Select the exact OS
    3) Download a) full feature software, updates, utilities
    4) Burn all downloads to a CD.
    Disconnect the power and USB cable. Install the full feature software, following the instructions.
    The updates and utilities can  be useful after the initial install.
    I have the F4135, and needed the scan update.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

    Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise 
    Standalone installer available here
    http://www.microsoft.com/en-us/download/details.aspx?id=28972
    fails with error code 0x80004005
    Is this because my installation has issues, or would the admin pack files be updated for RTM?
    Thank you in advance for any insight

    Found the solution here:
    http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
    Workaround:
    Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
    Extract the .msu file with a tool such as 7-Zip.
    Open an Admin command prompt and change directory to where you extracted the .msu.
    Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
    Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
    Use the tools as per usual.

  • Unable to install itunes for new computer with windows 8

    unable to install itunes for new computer with windows 8
    states this app unable to run on this PC

    Hello jgrn76,
    It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    If issues persist when trying to install it, I would try running through the steps in the article named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Otherwise, would you mind elaborating a bit on what the error message says, word for word?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Unable to install HP Deskjet Ink Advantage 4640 e-All-in-One Printer on Windows 10

    Hello Since I upgraded from Windows 8.1 Pro to Windows 10 last week I'm unable to connect to my HP Deskjet 4645 AiO printer.I downloaded the latest installer from HP website and ran the setup. My printer is detected however it won't install. The only error that is returned is: Unsuccessful Network Installation (The printer was unable to be installed over the network). Sending the install.log to HP came back with no solution for this problem. Anybody know how to install this printer on Windows 10. Thank you.

    Hello Since I upgraded from Windows 8.1 Pro to Windows 10 last week I'm unable to connect to my HP Deskjet 4645 AiO printer.I downloaded the latest installer from HP website and ran the setup. My printer is detected however it won't install. The only error that is returned is: Unsuccessful Network Installation (The printer was unable to be installed over the network). Sending the install.log to HP came back with no solution for this problem. Anybody know how to install this printer on Windows 10. Thank you.

  • Problems with the installing HP Deskjet 3845 in Windows 7

    I couldn't fine my HP model on the list and Windows update was unable to get a list of devices from Windows Update when I tried installing manually the HP Deskjet 3845 in Windows 7.  

    Hi Everyone, The driver is already built into Win 7. Follow the instructions below to install the proper driver. 1. Plug in the USB cable from the printer to the computer.2. If you have previously ran the Windows update your printer should be installed using the driver included in Win 7. If it doesn't update with a correct driver continue with the steps below.3. Open Devices and Printers4. Click Add Printer5. Click on Windows Update6. When the update has completed scroll down to HP on the left hand pane, and then select HP Deskjet 3840 Series from the list of available printers.7. Follow the on screen instructions to complete the driver installation.  

  • Trying to install HP Deskjet 2642 printer...not working

    I have tried to download HP Deskjet 2642 printer multiple times, however at the end of the installation, it tells me that the installation failed because the (path, or list of folders) doesn't exist or I don't have access to it. How do I fix this?!
    A similar situation happened when I downloaded a game from a website that I paid for. It wouldn't let me open it because I was denied access to (some file).
    I have an XPS 18.

    mllarwoo,
    The only printer I could find with the information you provided is the HP Deskjet 400 C2462. 
    A trip to the
    Windows Compatibility Center shows that it is in fact supported by Windows 8.1, which is good to know before continuing.
    Based on the error message you’re getting, it’s possible that the files are saving to a folder in which you don’t have the appropriate permissions to access due to not being an administrator. 
    You should try downloading your file(s) directly to your desktop, or even the Downloads or Documents folders. 
    Once they are completely downloaded, right-click on the file and select ‘Run as administrator’.
    If you get prompted for administrative credentials you most likely aren’t logged in as an administrator. 
    Without being logged in as an administrator or providing administrative credentials, you won’t be able to perform tasks such as installing new software.
    Mike
    Windows Outreach Team – IT Pro

  • HP Deskjet 9300 Printer needs Windows 8.1 Printer Driver

    Hi,
    I'd really like to install my  HP Deskjet 9300 Printer up to my new computer, but it's Window's 8.1 and I can't see any options for a compatible printer driver on the HP Website.  Any advice would be much appreciated ...
    Tom
    This question was solved.
    View Solution.

    Hi Tom.
    Sorry to inform you, this printer is not supported in Windows 8 and cannot be used with the operating system.
    http://h20565.www2.hp.com/hpsc/doc/public/display?​sp4ts.oid=295930&docId=emr_na-c03168175&docLocale=​...
    You may try installing an alternative driver as available for Windows 7, however it is not officially supported and there are no gurantees for that to work on Windows 8:
    Make sure that the USB cable is not connected to the product. If the USB cable is connected to the product, disconnect it.
    From the Windows taskbar, click the Windows icon (), and then click Devices and Printers. The Devices and Printers window opens.
    Click Add a printer. The Add Printer window opens.
    Click on 'The printer that I want isn't listed.
    Click Add a local printer.
    Click Use an existing port.
    Click the Use an existing port drop-down list, select LPT1 and then click Next.
    Under Manufacturer in the Install the printer driver window, click HP.
    Under Printers, select the HP Deskjet 1220c.
    When the installation is complete, a message displays on the computer stating that the product was added successfully.
    In the message window, click Finished.
    Connect the USB cable to the product, and connect the USB cable to the computer. A Device driver software was not successfully installed window opens.
    Click Close () to close the window.
    Right-click the HP Deskjet 1220c printer and then click Printer Properties. The Printer Properties window opens.
    Click the Ports tab.
    Click the drop down menu, and then change the port from LPT1 to USB or DOT4. if htere are several USB or DOT 4 ports select the one with the higherst number.
    Click OK and try printing.
    Hope that may work,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Unable to Install KB 3001652, 2961149. and 2796590 (Windows 2008 R2 Systems Not Connected to the Internet)

    To Anyone That Can Help,
    I'm on a set of WSUS enabled Windows 2008 R2  servers with no network access to the Internet and I am unable to  install the following:
    Update for Microsoft Visual Studio 2010 Tools for Office Runtime
    KB's 300162, KB 2961149. and KB 2796590
    Equally as painful, I am unable to find anything that helps.
    Any ideas...???
    Roderick Lyons

    The above from Don Pick pointed me to the answer!!!!
    1) obtained the actual update files (KB2796590,KB2961149,and KB3001652) from my Infrastructure Team WSUS Administrators (download is also available from Internet)
    2)
    Ran the update, which of course blew an error
    3) Clicked the error log file which gave me the following:
           Summary:Failed with error 0x800B010A (A certificate chain could not be built to a trusted root authority)
           file signature could not be verified
    4)https://support.microsoft.com/en-us/kb/2746268
    5)https://gallery.technet.microsoft.com/Configuring-Trusted-Roots-281be43a#content
    For all supported x64-based versions of Windows Server 2008 R2
    (The file was actually already installed)
    6) Executed the repair from step 4
    7) All updates (KB2796590,KB2961149,and KB3001652) installed without incident!!!
    Thanks All!!!
    Roderick Lyons

  • HT1926 Unable to install iTunes update on pc with Windows 7 x64 bit

    Unable to install iTunes upgrade (11.0.1 on pc running Windows 7 x64 bit. Running old version of iTunes ok.  Have tried opening with new administrator but to no avail. Following download message that 'problems with installation'  and to tray manually.  Same outcome.
    Anybody got any ideas?
    Thanks
    Ian

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Deskjet 6988 printer with Windows 7

    I have a Deskjet 6988 printer connected to my desktop PC running Vista Home Premium. I just bought a laptop which is running Windows 7. I have a home network that allows me to share the printer. I read that some printer features won't work with Windows 7. Apparently the automatic duplex printing feature is one of them. Has anyone come up with a work around, does HP plan on coming out with new drivers to work with Windows 7?

    I also have HP Deskjet 6988 with duplex cababilities, but since I have upgraded to windows 7, I cannot duplex.  Has anyone found a solution???

  • Unable to Install JRUN 4 Updater 7 on windows server 2008 64 bit machine

    Please help us on the error while installing jrun4, updater 7 on Microsoft Windows Server 2008 R2 Enterprise 64 bit operating system
    The JVM installed on the machine is 32 bit.
    I installed jrun on the machine successfully. When I try to add a web server using the web server configuration tool.
    I get the below fatal windows error.
    Windows package manager
    Operation failed with 0x8007000B
    An attempt was made to load a program with an incorrect format.
    Please help....

    Hi Charlie,
    64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
    I hope this was helpful.

  • I am unable to install Itunes 10.6 on my windows vista 64. What do I need to do to be able to install?

    How can I install Itunes 10.6 on my windows Vista 64?

    No, but you do at least have to buy Snow Leopard. Whether you can run it depends on what iMac you have:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30.  You can also purchase the code to use to download Lion from the same number.
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57

  • Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

    Dear everyone, 
    We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
    http://support.microsoft.com/kb/2677070
    Thanks,
    Users

    Hi,
    According to this KB article, there are many exceptions where this KB is not applicable.
    Please perform the following steps:
    Expand the “For all supported…” title in the File Information section in the KB article.
    Find Crypt32.dll.mui files on your machine.
    Then compare the file version, file size, data and time with the ones listed in the KB article.
    If there is a match, then this KB doesn’t apply to your machine, which is by design.
    Hope this helps.
    Best Regards,
    Amy Wang

Maybe you are looking for