Unable to install Intel Dynamic Platform and Thermal Framework on Yoga 13

I recently purchased a Yoga 13. I just got Windows 8 Enterprise installed on there. I am unable to install Intel Dynamic and Thermal Framework. I downloaded this directly from Lenovo Support (the file is labeled "Dynamic Platform and Thermal Framework for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13").
During installation, the service agreement is in another language (Chinese, perhaps). When the installer starts running, I immediately get an error:
"The setup program failed to install one or more device drivers. Setup will exit."
And that's it. What do I have to do to get this to install? Am I downloading the right version? I don't see another version to download anywhere. I tried finding the software on Intel, but I was unable to. When using Intel® Driver Update Utility, it recognizes hardware that needs drivers, but it does not give me the Dynamic Platform download.
Any help is appreciated.

Sorry, I don't think this will help, but...
I have been investigating why my Yoga-13 might be freezing up (about once every other day). While looking at errors in the event log, I came across errors that led to the following sites when I googled the error:
http://en.community.dell.com/support-forums/laptop/f/3518/p/19481625/20262664.aspx
http://forum.notebookreview.com/dell-xps-studio-xps/650572-new-dell-xps-l521x-ivy-bridge-536.html#po...
Probably not any help.
If you do get it installed and you experience your yoga freezing up (no response to any input), please post here.

Similar Messages

  • What is the disadvantage of uninstalling Intel Dynamic Platform and Thermal Framework?

    I have Yoga 13 and after I found that Intel Dynamic Platform and Thermal Framework (DPTF) is throttling my CPU to 800 MHz in non laptop mode, so i uninstalled it, and it works wonder.
    However I see that in my Device Manager, there are two devices that needs driver.
    So what is the disadvantage of uninstalling Intel Dynamic Platform and Thermal Framework? what is the after effect? Is it safe to uninstall it?
    Thanks.

    Sorry, I don't think this will help, but...
    I have been investigating why my Yoga-13 might be freezing up (about once every other day). While looking at errors in the event log, I came across errors that led to the following sites when I googled the error:
    http://en.community.dell.com/support-forums/laptop/f/3518/p/19481625/20262664.aspx
    http://forum.notebookreview.com/dell-xps-studio-xps/650572-new-dell-xps-l521x-ivy-bridge-536.html#po...
    Probably not any help.
    If you do get it installed and you experience your yoga freezing up (no response to any input), please post here.

  • Unable to install SQL server 2000 and 2005 on Satellite A205-s5831

    Hello everyone.
    I Needs some helps from all of you.
    I have Toshiba Laptop Satellite A205-S5831.
    Its Have Windows Vista Home Premium.
    And I am unable to install SQL server 2000 and 2005.
    I also Unable to Install Windows XP SP2.
    Problem is SATA driver.
    Plz Help me ...!
    Response me

    Hi
    The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
    The SATA driver can be found in the Intel Storage Manager.
    I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
    Here you will find all details regarding the nLite:
    http://www.nliteos.com/
    Regarding SQL server issue;
    Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software

  • Unable to install Java 2 Platform Standard Edition Development Kit 1.4.2_11

    I am unable to install Java 2 Platform Standard Edition Development Kit 1.4.2_11 and NetBeans IDE 5.0 on Windows 98. I get the following message:
    Java 2 Platform Standard Edition Development Kit 1.4.2_11 cannot be installed on your computer because current account does not have sufficient privileges.
    I am trying to install at home, no network, and as far as I can tell, there is no way to give yourself "administrative privileges". Is Windows 98 not supported anymore?

    98SE is supported. See configuration requirements for the various versions.
    Try downloading Java and installing it, then go to the NetBeans site and downloading it and installing separately.

  • I have a iMac 5,1 made b/t 7/23/07-7/29/07 but have OS X 10.6.8 w/ 2GB mem but unable to install Maverick, Garage band and iPhoto.  Please help.  Thanks!

    I have a iMac 5,1 made b/t 7/23/07-7/29/07 but have OS X 10.6.8 w/ 2GB mem but unable to install Maverick, Garage band and iPhoto. Would installing Snow Leopard 10.6.8 make it possible to install Maverick?  Please help.  Thanks!

    The highest OS X version you can install on your model iMac is OS X Lion 10.7.5.
    To get to this! you would need to purchase the retail OS X 10.6 Snow Leopard DVD, first.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    OS X 10.7 Lion is no longer available, directly, from the Mac App Store. You need to contact Apple at 1-800-MYAPPLE and ask for retail software sales and tell them you would like to upgrade your Mac to OS X 10.7 Lion and they will give you a special download code to download it from the Mac App Store.

  • Unable to install Intel Management Engine Interface

    http://support.toshiba.com/support/viewContentDetail?contentId=4007230 When I try to install it, a box pops up and says ERROR Do Not Support This Platform. I have a Toshiba Satellite C855-S5234 

    I also have the same issue.  I have a TOSHIBA Satellite C855-S5206 running Win 7 64-bit.I ignored the update months ago in TOSHIBA Service Station after I tried to install it and it gave a popup "ERROR: Do not support this platform." But today TOSHIBA Service Station asked to install it again.  I tried but same popup error.I went to the support page for my laptop and it lists this as a required update (same update as listed on TOSHIBA Service Station):Intel Management Engine Interface Posted Date: 2015-03-20 | Version: V9.5.24.1790 | Size: 70.13M I downloaded and tried to install the exe file and it still gives a popup "ERROR: Do not support this platform."The update is for the series 7 chipset but I'm also running the series 3. Has anyone resolved this?? 

  • Unable to install Adobe Flash Player and Download Manager issue

    Dear all,
    1. I tried to install adobe flash player and have enabled
    'download unsigned ativex control' and "run activex control and
    plugins", but never succeeded.
    2. I am unable to locate the "download manager" sources.
    Please help.
    Regards,
    Harsen

    As a note, running with no anti-virus software is a very bad choice. I would try installing Microsoft security Essentials, [http://microsoft.com/security_essentials http://microsoft.com/security_essentials] to stay safe with a free but light weight anti-virus.
    If you want to install a new version of Flash, try installing [http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe].
    However, the sites might

  • Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

    Hi Guys,
    i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
    Hp device Model.:- hp pavilion g4 1303au
    Model no.:- 5c03213jsh
    network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
    Name: PCI Device
    Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
    Name: SM Bus Controller
    Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
    thanks,
    Amit Rai

    Hi:
    SMBus controller:
    Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install. 
    Download and unzip the file.
    Go to the device manager and click on the smbus controller needing drivers.  Click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
    Make sure the Include Subfolders box is checked and the driver should install.  Then reboot.
    Ethernet:  Download and install the 1st driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
    Card reader (PCI dev.):  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
    Wireless:  You will have to try the Vista driver for the Atheros wireless card...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
    Attachments:
    sp66185.zip ‏7 KB

  • Unable to Install KB 3001652, 2961149. and 2796590 (Windows 2008 R2 Systems Not Connected to the Internet)

    To Anyone That Can Help,
    I'm on a set of WSUS enabled Windows 2008 R2  servers with no network access to the Internet and I am unable to  install the following:
    Update for Microsoft Visual Studio 2010 Tools for Office Runtime
    KB's 300162, KB 2961149. and KB 2796590
    Equally as painful, I am unable to find anything that helps.
    Any ideas...???
    Roderick Lyons

    The above from Don Pick pointed me to the answer!!!!
    1) obtained the actual update files (KB2796590,KB2961149,and KB3001652) from my Infrastructure Team WSUS Administrators (download is also available from Internet)
    2)
    Ran the update, which of course blew an error
    3) Clicked the error log file which gave me the following:
           Summary:Failed with error 0x800B010A (A certificate chain could not be built to a trusted root authority)
           file signature could not be verified
    4)https://support.microsoft.com/en-us/kb/2746268
    5)https://gallery.technet.microsoft.com/Configuring-Trusted-Roots-281be43a#content
    For all supported x64-based versions of Windows Server 2008 R2
    (The file was actually already installed)
    6) Executed the repair from step 4
    7) All updates (KB2796590,KB2961149,and KB3001652) installed without incident!!!
    Thanks All!!!
    Roderick Lyons

  • Unable to install Adobe Digital Editions and Windows 8

    help - I keep trying to install Adobe Digital Editions on Windows 8 - icon appears; program is in "programs" but ADE isn't there - I've installed, uninstalled several times - and still not up and running - need help- is ADE not compatible with Windows 8?

    Moved to ADE forum.

  • Unable to Install Office 2013 Pro and I get returned message "Couldn't Install We're sorry, we had a problem installing your office programs"

    I purchased 40 licenses of Office 2013 Pro from a vendor in the US and received 40 product keys along with the URL to download the software - 1 for each pc activation codes.  I have done a few and were all successful.  I am now trying
    install on 2 other pcs and I am having real difficulty and getting error message each time I try to install.  I am able to download the installer and copied to my desktop and when I double click to execute it, it gives me the option to run on the next
    screen.  I click on run then it gives me the message " do you want to allow the program to make changes to this computer".  When I press YES, nothing happens and minutes later, I get the flwg message everytime, "Couldn't
    install"  "We're sorry, we had a problem installing your office programs.  Is your internet connection working?  Do you have enough free space on your main hard drive?  Please try installing again after you've checked the above. 
    Go online for additional help.
    I have lots of space and my pc is Win 7 64 bit new machine.  I have connection to internet and I was able to get the others done.  What is the problem here and I have been trying to work late night hours to try to install the program and I am unable
    to successfully get it to work.  I receive the same message every time and I followed all the recommended troubleshoot steps I found on the internet.  Someone please help.  I have to install all for all the PCs we have for our organization. 
    Please respond because I am really stuck.
    Gabe

    Hi Gabe,
    First, please check the suggestion above is helpful. I also suggest you removing all version of Office and re-install Office 2013.
    We can try to run the application as an administrator and check if it works.
     1. Right click the shortcut of the application or the main application.
     2. Select properties.
     3. Select compatibility tab and select "Run this program as an administrator."
    If there is anything I can do for you about this issue, don't hesitate to tell me.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Bonjour64msi error unable to install itunes 10.5 and ios 5.0

    Please can someone help me
    I can't download the ios 5.o as I need the 10.5 itunes which I also can't install because of this stupid Bonjour64msi error. I've tried unintalling this bonjour and it says it doesn't exsist well if it doesn't exsist what is the problem.
    I'm losing the will to live.
    My apps won't update because I need these updates so Im going round in circles.
    Ive tried dowloading a a cleanup utility and even that doesnt download properly.
    I'm using windows 7
    Please help
    Thank you

    1. Go to softpedia.com
    2. In the search box in softpedia.com web site type in 'Windows Installer Cleanup Utility'. Click on GO
    3  On the next page, at the bottom you will see in blue 'Windows Installer CleanUp Utility 2.5.0.1 by Microsoft'
    4 Click on that link and it will take you to another page. On the left side you will see a 'download' button in blue colour. Click on that button and it will take you to the next page.
    5 Click on link that reads: 'Softpedia Mirror (US) exe', A download window will appear. Click on 'save file'.
    6 Install 'Windows Installer ClenaUp Utility' program.
    7 After installing program, open up the program and scroll down the list till you find 'Apple Software Update'
    8 Highlight it and click remove.
    9 Now you can install itunes 10.5
    This is exactly what I did and it worked for me like a charm. I even updated my iphone with IOS 5 tonight.
    There is another way which I learned later which is easier and faster. I am running Windows 7. Go to 'Control Panel'. Scroll down to 'Programs and Features' and click on it. Scroll down till you see 'Apple Software Update' and right click on it and click 'uninstall' and then install itunes 10.5. That should work also. I've heard that some people can't see it in control panel so the other way would be to do as I did and download the Windows Installer CleanUp Utility. I hope I've made this as simple as possible for you. Good luck.

  • Unable to install itunes error 7 and windows error 193

    I could not update my itunes. I have Windows 7. I got an error 7 and windows error 193.
    I followed itunes Microsoft.Net fix but it did not work.
    I get a message to reinstall. Itunes is successfully installed.
    But then there is a message that I need to reinstall and error 7.

    Hi

  • Unable to install Adobe Flash Update and am beyond frustrated.

    For the last several weeks/months I have been having an issue installing the newest version of Adobe Flash. My System Specs are as follows:
    AMD 64 Dual-Core Processor 6000+ 3.0 GHz Processor
    4.0 Gig of RAM
    Windows 7 Ultimate (64-bit)
    Internet Explorer 11
    My problem started when they updated to the new version of the program. It told me that I needed to install the update and so I went to the website and started the download process like I have done 1,000 times before. Only this time I after I ran the program I started getting what I have my frustration has dubbed "the gray box of death." when it comes to the part where the installation is supposed to begin you are supposed to see the installation progress bar all I get is a solid gray box with no bar in the middle. This has happened many times and I do not know what in the world to do about it. I have went online and tried to follow many guides all with the same result.
    Today I went through my computer and shut down my firewall/virus protection/malware protection (even to the point of completely uninstalling some of the programs) with no success. I have tried updating the existing software. I have tried uninstalling and doing a 100% fresh install. All of these have the same result. I know it is not the fact that  I have a 64-bit OS because your site identifies it as a 64-bit system so I should be getting the right update. I have tried everything I can think of (short of wiping my entire drive which I am not going to do) and I am at the end of my rope. Please help me resolve this issue.
    Frustrated

    Hi lord_knikon,
    I understand your frustration.  We've had several users report this, however, we've not been able to reproduce.  This happens with the online installer downloaded from get.adobe.com/flashplayer.  We've not seen this with the offline installers, posted at the bottom of this help page, http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html.  Please try using the offline installer and you should be able to get Flash Player installed on your system.
    Maria

  • Unable to install ipa to iphone5s and ipad retina by Flash Builder 4.6 using latest Flex sdk 4.13

    I am using Apache Flex 4.13 FP11.1 AIR14.0 for my Flash Builder 4.6 in my windows 7. attatched is the code. I am using provisining profile and my iphone5 and ipad retina UDID is added in that. But exported application via flash builder for ios is not installing in my ipad retina display and iphone5. I including following default images.
    [email protected]
    Default-Landscape.png
    [email protected]
    Default-Portrait.png
    [email protected]
    Default.png
    [email protected]
    my test-app.xml files contents is as follows.
    <?xml version="1.0" encoding="utf-8" standalone="no"?>
    <application xmlns="http://ns.adobe.com/air/application/14.0">
      <id>com.miracle.Saraplayer</id>
      <filename>Sara Player</filename>
      <!-- The name that is displayed in the AIR application installer.
      May have multiple values for each language. See samples or xsd schema file. Optional. -->
      <name>
      <text xml:lang="en">Sara Player</text>
      <text xml:lang="zh">Sara Player</text>
      <text xml:lang="cs">Sara Player</text>
      <text xml:lang="nl">Sara Player</text>
      <text xml:lang="fr">Sara Player</text>
      <text xml:lang="de">Sara Player</text>
      <text xml:lang="it">Sara Player</text>
      <text xml:lang="ja">Sara Player</text>
      <text xml:lang="ko">Sara Player</text>
      <text xml:lang="pl">Sara Player</text>
      <text xml:lang="pt">Sara Player</text>
      <text xml:lang="ru">Sara Player</text>
      <text xml:lang="es">Sara Player</text>
      <text xml:lang="sv">Sara Player</text>
      <text xml:lang="tr">Sara Player</text>
      </name>
      <customUpdateUI>false</customUpdateUI>
      <supportedLanguages>en zh cs nl fr de it ja ko pl pt ru es sv tr</supportedLanguages>
      <versionNumber>0.0.0</versionNumber>
      <versionLabel>One</versionLabel>
      <description>Nothing here now</description>
      <!-- Settings for the application's initial window. Required. -->
      <initialWindow>
      <!-- The main SWF or HTML file of the application. Required. -->
      <!-- Note: In Flash Builder, the SWF reference is set automatically. -->
      <content>[This value will be overwritten by Flash Builder in the output app.xml]</content>
            <aspectRatio>portrait</aspectRatio>
            <renderMode>auto</renderMode>
      <autoOrients>false</autoOrients>
            <fullScreen>true</fullScreen>
            <visible>true</visible>
            <softKeyboardBehavior>none</softKeyboardBehavior>
        </initialWindow>
      <!-- The icon the system uses for the application. For at least one resolution, specify the path to a PNG file included in the AIR package. Optional. -->
      <icon>
      <image16x16>_icons/16.png</image16x16>
      <image32x32>_icons/32.png</image32x32>
      <image36x36>_icons/36.png</image36x36>
      <image128x128>_icons/128.png</image128x128>
         <image29x29>_icons/Icon-Small.png</image29x29>
         <image48x48>_icons/48.png</image48x48>
         <image57x57>_icons/Icon.png</image57x57>
         <image72x72>_icons/Icon-72.png</image72x72>
         <image114x114>_icons/[email protected]</image114x114>
         <image512x512>_icons/iTunesArtwork.png</image512x512>
         <image50x50>_icons/Icon-Small-50.png</image50x50>
         <image58x58>_icons/[email protected]</image58x58>
         <image100x100>_icons/[email protected]</image100x100>
         <image144x144>_icons/[email protected]</image144x144>
         <image1024x1024>_icons/[email protected]</image1024x1024>
      </icon>
      <!-- Whether the application can be launched when the user clicks a link in a web browser.
      Optional. Default false. -->
      <allowBrowserInvocation>true</allowBrowserInvocation>
        <!-- iOS specific capabilities -->
      <iPhone>
            <InfoAdditions><![CDATA[
      <key>UIDeviceFamily</key>
      <array>
      <string>1</string>
      <string>2</string>
      </array>
      <key>UIStatusBarStyle</key>
                <string>UIStatusBarStyleBlackOpaque</string>
                <key>UIRequiresPersistentWiFi</key>
                <string>YES</string>
      ]]></InfoAdditions>
      <Entitlements>
             <![CDATA[
                 <key>aps-environment</key>
                 <string>development</string>
             ]]>
         </Entitlements>
            <requestedDisplayResolution>high</requestedDisplayResolution>
        </iPhone>
    </application>
    The problem is that when i sync it via itunes. it shows Waiting... then it shows progress for installing. when i click the app icon in device it shows Installing... as shown in these images but never shows finished process.
    Dropbox - 1.jpg
    Dropbox - 2.jpg
    Dropbox - 3.jpg
    source: Dropbox - test.fxp
    i am a bit confused and project is stuck. i am helpless now.

    Even I am facing almost same issue
    Problem installing Adhoc version to iPhone and iPad - Development Environment Is - Adobe Flash CS6

Maybe you are looking for