Unable to install iOS 5 on iPad 1. I get "This version of the iPad software (4.2) is the current version."

I have also tried to manually upgrade but then I get the following error message:
The iPad "iPad" could not be upgraded. An unknown error occurred (3002). (I have followed the explanation here on the 3002 error but that does not make any sense.)
I have seen other reports on the same issue but found no solutions. Can anyone help?

I fixed iPad with recovery mode.
Hold down home / power button together for 10 seconds.
Then release power button.
It will go into recovery mode and you can update to OS5.

Similar Messages

  • HT5192 Unable to install ios 5.1.1, while is already downloaded on my ipad

    I already downloaded the update of ios 5.1.1 OTA, using wifi on my ipad but when it is going to install, message occured "unable to install the update, error occured when it is going to install", can somebody help? The updated can't remove and can't be installed. It's stuck on my ipad 1

    You can try to plug it into iTunes and try to do the update that way.  The download might of became corrupted or it can't verify the integrity of the update.  You could also try to hard reset it by pressing both the home and power button for about 10 seconds.  If all else fails, wipe the iPad back to factory defaults and try the update again.  Not ideal but sometimes its the only way out. 

  • My ipad 3 is unable to install iOS 7.02

    I was trying to update from iOS 5 to iOS 7. The donwload seemed to be ok but then the installation process appeared to be blocked in the middle. The apple icon and a progress bar showing the middle of the proccess is displayed. The progress bar has not moved for hours

    PaulAlanRoberts wrote:
    For months now i have been unable to update the operating system on my Ipad2. I am unable to install IOS 7.1.2 to my iPad 2. It just downloads and then the install fails. I currently have IOS 7.0.4. A few months ago i reset the iPad but it appears to have not helped.
    If you "reset" the iPad, (restored the iOS) that should have installed the new software onto the device. But I am never sure what any user means when they use the term reset.
    Some people use the term to mean restart. Some mean reset the system using the home and sleep buttons, some people mean that they restored the iOS  software. How did you "reset" your iPad?
    WHen you try to update, do you disable your firewall and antivirus software of using iTunes? Are you using iTunes? Are you using WiFi to update OTA?

  • Unable to install iOS 7.1.2 after download

    unable to install iOS 7.1.2 after download despite repeated attempts..

    PaulAlanRoberts wrote:
    For months now i have been unable to update the operating system on my Ipad2. I am unable to install IOS 7.1.2 to my iPad 2. It just downloads and then the install fails. I currently have IOS 7.0.4. A few months ago i reset the iPad but it appears to have not helped.
    If you "reset" the iPad, (restored the iOS) that should have installed the new software onto the device. But I am never sure what any user means when they use the term reset.
    Some people use the term to mean restart. Some mean reset the system using the home and sleep buttons, some people mean that they restored the iOS  software. How did you "reset" your iPad?
    WHen you try to update, do you disable your firewall and antivirus software of using iTunes? Are you using iTunes? Are you using WiFi to update OTA?

  • Unable to install ios 8.2

    Unable to install ios 8.2

    Try to force close the settings app and then reset your iPad. After it restarts, go back to the Software Upadet setting and see if it will resume the process.
    In order to close the Settings apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.

  • Unable to install iOS 7.1.1

    Hi guys,
    About 12 hours ago my phone lost signal, has been 'searching' ever since. On O2 in the UK.
    Spoke to network provider, done all the usual resets.
    Then a few hours later realised ios7.1.1 had downloaded automatically. Won't install (message says unable to install)
    Spoke to apple, they suggested a backup then erase all content and settings.
    Tried this but it wouldn't erase due to an iCloud error.
    Tried to erase iCloud account but it won't delete
    Totally stuck, have no laptop iTunes to connect to
    Any help would be great
    Thanks Chris

    PaulAlanRoberts wrote:
    For months now i have been unable to update the operating system on my Ipad2. I am unable to install IOS 7.1.2 to my iPad 2. It just downloads and then the install fails. I currently have IOS 7.0.4. A few months ago i reset the iPad but it appears to have not helped.
    If you "reset" the iPad, (restored the iOS) that should have installed the new software onto the device. But I am never sure what any user means when they use the term reset.
    Some people use the term to mean restart. Some mean reset the system using the home and sleep buttons, some people mean that they restored the iOS  software. How did you "reset" your iPad?
    WHen you try to update, do you disable your firewall and antivirus software of using iTunes? Are you using iTunes? Are you using WiFi to update OTA?

  • Since I installed IOS 8.0.2 (was ok on IOS7),on my iPad 4 "photos" don't scroll properly, it freezes and staggers, it's really slow to scroll to the bottom of the page (in Album, Events From My IMac) it's very annoying!

    Since I installed IOS 8.0.2 (was ok on IOS7),on my iPad 4 "photos" don't scroll properly, it freezes and staggers, it's really slow to scroll to the bottom of the page (in Album, Events From My IMac) it's very annoying!

    I'm not sure, but I know it's not recommended to upgrade to iOS 8 on anything older than an iPhone 5. I only lost my music playlists and music that was on my phone, but that music is also on my iTunes, not the playlists though, and I don't want to go through ALL my iTunes library to fix it either... But it seems I don't have a choice right now.
    Whatever you do, do NOT upgrade to iCloud Drive, keep iCloud till OS X Yosemite comes out, if your computer is a Mac. I also just noticed that all my documents on my phone are gone from Pages, BUT if I go on the iCloud website they are still there. Hopefully it will all work itself out when I can update my macbook pro to OS X Yosemite.
    If you backed up your phone and all your purchases off your iPhone prior to trying to upgrade you should be fine... But I'm not even remotely sure.

  • HT201322 Can't get this to work on iPad A1395 with iOS 6.1.2 - any suggestions?

    Can't get this to work on iPad A1395 with iOS 6.1.2 - any suggestions?

    If you mean hiding or unhiding apps, the article is incorrect since iOS 6 and the accompanying iTunes Store redesign were released. You can at this time only hide and unhide apps through iTunes on your computere.
    Regards.

  • Hi, I just got done installing IOS 7 and now whenever I send an i message my email shows up on the other phone. My phone number is greyed out and doen't give me the option to click it. Please help!

    Hi, I just got done installing IOS 7 and now whenever I send an i message my email shows up on the other phone. My phone number is greyed out and doen't give me the option to click it. Please help!

    Where is the phone number on the iPod?
    If you have an iPhone with iOS and use the same ID for Messages and FaceTime as on the iPod the iPhone's phone number will be listed for Messages and FaceTime on the iPod.
    If you changed phone numbers on the iPhone, sign out of Messages and FaceTime and then sing back in. Then do the same a little while later on the iPod.
    For some info see:
    iOS: About Messages

  • HT4623 When I try to install iOS 6.1.1 I get the message that it failed.

    When I try to install iOS 6.1.1 I get the message that it failed because I am no longer connected to the internet. NOT TRUE, Safari and mail are happily connected to the internet and working fine. Any clue?

    You could try reseting.  MAKE SURE YOU HAVE A VALID BACKUP AND KNOW HOW TO RESTORE IT BEFORE YOU TRY THIS
    Go to settings-general-reset-erase all content and settings.   This should be your last resort, it'll erase your data...

  • I have paid up for a Teachers account and am unable to install any program. I keep getting directed to your 'Trial has expired'.

    I have paid up for a Teachers account and am unable to install any program. I keep getting directed to your 'Trial has expired'.

    Hi Pamela,
    You can follow the article: Activation & deactivation help which might be helpful for your activation issue.
    Please let us know if it works or if you still face any issue.
    Thanks,
    Ratandeep Arora

  • Hi when i open Photoshop i get this message in a little box  (could not complete the command because Photoshop was unable to find the JavaScript  plug-in.)  Im using the trial version of Photoshop

    im wondering if anyone can help with this
    I get this message when i open PhotoShop
    (could not complete the command because Photoshop was unable to find the JavaScript)

    Photoshop installer should have installed a ScriptingSupport Plugin in each version of Photoshop you installed. Scan your system for ScriptingSupport I found six on my windows system. Here where I found them:

  • HT1338 Even though I have the Pages 5.0.1 installed as the default software, I still receive the message "You need a newer version of pages to open this document."  HELP!

    Even though I have the Pages 5.0.1 installed as the default software, I still receive the message “You need a newer version of pages to open this document.”  HELP!

    Please clarify....
    Mac OS X (10.4.6)
    What your system profile shows yet, you posted in the ML forums.

  • I can't install icloud on my pc i get  this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'

    i can't install icloud on my pc i get  this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'.this could indicate a network error, an error reading from the CD-ROM, or a problem with this package!  please help!!!!!

    “the procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.”
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • Can I get this book on my iPad ndy's Standard Professional Barbering 5th edit

    Can I get this book on my iPad 2 milandy's Standard Professional Barbering 5th edit

    Can I get this book on my iPad 2 milandy's Standard Professional Barbering 5th edit

  • HT1766 When I turn iPad on I get a box that says Not Enough Storage and neither the Closeor Settings buttons do anything. The iPad turns off on its own. It is full charged.

    When I turn iPad on I get a box that says Not Enough Storage and neither the Closeor Settings buttons do anything. The iPad turns off on its own. It is full charged.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

Maybe you are looking for

  • SAPSCript how to print  a comment at the end of main window on first page?

    In SAP Scripts, How do I print a comment at the end of the first page (I have several pages of data) in the main window? - Ven

  • Batch number auto generation nedded

    hi all,               i have a query that when i make a GRPO of 10 items with different qty, these items are set to batch on every transaction, then it will ask to enter the batch number of all item with the number of their quantity, is there any pro

  • Excise document number update in Document flow.

    Is there any configuration for update the excise document in Sales order document flow. Ex : Like. - > SO-> Delivery-> Billing -> Excise invoice no Ramesh B

  • A rman scirpt in RHEL3 linux env

    I have a rman scripts file as rman target / run { backup as backupset incremental level 1 cumulative device type disk tag 'Thu_full_bkup%LEVEL_1'  database; recover copy of database; backup device type disk tag 'Thu_full_bkup%LEVEL_1' archivelog all

  • Failed on [nsMutableArrayObj removeAllObjects] when rintime

    Hi guys. I am facing to a little problem related NSMutableArray. I declared NSMutableArray proprety in .h file following as : @interface MyCustomController : UIViewController { NSMutableArray *arrayObject; @property (nonatomic, retain) NSMutableArray