Unable to install itunes 10.1 to Windows vista

Hai everyone.
Ive been having a really hard time trying to install itunes 10.1
To do so,I uninstalled itunes 10 and tried installing itunes 10.1.While it is in the process of installing,an alert pops up and says "Could not access %Appdata%/" and after i hit cancel another alert pops up saying "Could not access network location %appdata%" and then another alert pops up saying quicktime was not installed.
I have followed every support to try to solve this problem and it still wont install.
I have uninstalled and installed many of times.
I updated my windows to the latest package.
I downloaded the itunes 10.1 32bit because that is the specific system type for my computer.
I downloaded itunes 9,but dosent read my library because it was created with a newer version of itunes.
I have deleted the temp folder many many times.
I have tried installing in administrator mode and same problem.
My friend that is really good with computers looked into my computer and found nothing wrong with and files.
What should I do?
Please help.

Did you try the fixit from the following Microsoft document, vanessa?
[You receive an "Error 1606" error message when you try to install or remove a Microsoft program|http://support.microsoft.com/kb/886549]

Similar Messages

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Are you unable to install iTunes 10 on your windows 7 64 bit platform?

    Ok, I was having the same issues and tried uninstalling all Apple software. When I tried to uninstall the Apple updater it gave me the same message about something missing. So I right clicked on it in the uninstall window and clicked repair instead. I installed iTunes again and had no issues.
    Hope this helps!!

    Hi, Looks like Windows7 is not supported for CTM 8.5. http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/8.5/installation/guide/85sysreq.html#wp1072916 CTM supports Window7 32

  • Unable to install itunes error 7 and windows error 193

    I could not update my itunes. I have Windows 7. I got an error 7 and windows error 193.
    I followed itunes Microsoft.Net fix but it did not work.
    I get a message to reinstall. Itunes is successfully installed.
    But then there is a message that I need to reinstall and error 7.

    Hi

  • Can't Install iTunes 10.6.3 Windows Vista Windows Installer Problem

    Basically, just before installation completes a popup of "There is a problem with this Windows InstWhat exactly would I be missing??? please help !aller package. A program required for this install to complete could not be run.".  I've read many threads that state that all I have to do is run a repair on the Apple Software Update(ASU) but my problem is that I've already uninstalled it. Now what comes to my mind is that, it wasn't a clean uninstall as I just uninstalled through Add & Remove.
    So I would preferably like to get an answer to the whole problem or if not what files are linked to the ASU that might cause this problem. Please help I've alot of things and I really hope there is another solution then to reformat my PC, I really don't wanna reformat my laptop just for iTunes and because I have an iPhone, I unfortunately, have to depend on having it installed.
    Back story (Why I do not have ASU):
    When I updated my iTunes and several other Apple software, I was unable to start itunes, kept getting a permissions issue. So I set all the permissions to my User Account (note that I am, from the start, using an admin account) but still errors kept popping up. Usually when an update doesn't work I just go through Add & Remove and uninstall all Apple programs before trying to reinstall iTunes and etc, which I did, Except this time...

    Download and save a full itunessetup.exe or itunessetup64.exe file(depends on your operating system).
    http://www.apple.com/itunes/download/
    Use Winrar to unzip the file into a folder. Then right mouse click the file AppleSoftwareUpdate.msi from that folder to install.
    If you don't have winrar, you can go to this link to download a free trial version.
    http://download.cnet.com/WinRAR-64-bit/3000-2250_4-10965579.html?tag=dropDownFor m;pop

  • Cannot install itunes 7.1 in Windows Vista Home Premium

    I am getting this error when I try to install iTunes:
    "iTunes could not be installed because Visual Basic Script (VBScript) is not installed or has been disabled. Make sure VBScript is installed, turn off script blocking in anti-virus and personal firewall software, reregister VBScript, and the install iTunes."
    Does anyone know how to fix this problem? Please advise.
    Thanks
      Other OS   Windows Vista Home
      Other OS   Windows Vista Home

    Could you please post the link, where you found your answer,... I am having the same problem, and unable to install the itunes, to a new pc, which has vista,...ty.

  • Help installing itunes on laptop with Windows Vista.

    I have a laptop with Windows Vista.  I've tried to download iTunes but I keep getting a message that says "There is a problem with this Windows Installer package.  A program required for his install to complete could not be run.  Contact your support personel or package vendor."  I read a thread that suggested removing all Apple components then restarting.  I was unable to remove Apple Software Update.  All other components were removed fine.  Someone please help.  Thanks.

    This forum is for troublshooting compatibility issues between Macs and Windows, not iTunes.
    Please post your question in the iTunes discussions:
    http://discussions.apple.com/category.jspa?categoryID=150

  • VBscript error message when installing itunes 7.2 on windows vista

    I have tried to install itunes 7.2 with vista as my OS, but everytime i do, I get a message saying that VBscript is disabled and I need to enable it. I have also tried to uninstall itunes, but I get the same message also. I have checked for an answer but I can only find an answer for XP/2000...can anyone help?
      Windows Vista  

    I'm having the same exact problems. I cannot upgrade itunes or quicktime. The problem seems to have happeed since Microsoft sent out it's Itunes patch a few weeks ago.
    I'm running spy sweeper and pc-cillian on my system. I've shut both down as well as disabling protected mode on IE, but nothing seems to help.
    HP   Windows Vista  

  • Error when installing itunes version 9 on Windows Vista 32bit

    When trying to install itunes version 9 an error has come up before the installation is complete.
    The error reads -
    An error occurred during the installation of assembly
    'microsoft Vo80.CRT,version = "8.0.50727.4053,"type="wn32",publickey token=1fc8b3b9ale18e3b" process or architecture="x86"
    HRESULT.0x800736133
    Can anyone help me - I am using windows vista 32bit. Have tried turing off ALL security and reinstalling as someone else suggested previously. But still have had no luck
    Thanks

    Thanks Emma!
    Ox800736B3
    Not a lot of documentation on that one, I'm afraid, but there's some general principles troubleshooting we can try with it that might get us moving forwards.
    (1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
    [Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
    Does iTunes install for you after applying that update?
    (2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

  • Error installing itunes 10.5 on windows vista

    I keep getting an error message that says something about the windows installer when I try to download itunes 10.5

    You should probably begin by doing all your windows vista windows updates, those should take care of updating windows installer.
    Once you're updated on windows, you should check to see if you have a 64bit version of windows.
    If you do, you'll want to install the 64bit version of itunes:  http://support.apple.com/kb/DL1427

  • VBScript Error when trying to install iTunes 7.2 on Windows Vista PC

    I downloaded iTunes v7.2 + Quicktime. When I try to install, I receive the following error:
    "iTunes could not be installed because Visual Basic Script (VBScript) is not installed or has been disabled. Make sure VBScript is installed, turn-off script blocking in anti-virus and personal firewall software, re-register VBScript, and then install iTunes."
    I installed my current version of iTunes v7.1.1.5 on my new Windows Vista PC just a month or so ago and never encountered this error. I have also tried to update Quicktime and get this same error. Why am I getting this error now? What do I need to do to 1) ensure VBScript is installed, 2) that script blocking is turned off since I don't see any settings in my Windows Live OneCare that allow me to do anything related to scripting, and finally 3) re-register VBScript?
    PLEASE HELP. Thanks!
    Dell XPS M2010   Windows Vista  

    although the following document refers to XP rather than Vista, it's still worth a crack on a Vista box:
    iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

  • When installing itunes on PC with Windows Vista, the itunes program "took over" all of my desktop icons.

    When installing itunes of my PC with Windows Vista, the itunes program "took over" all of my desktop icons.  How can I install it so it doesn't do that?  Thanks!

    You can force Vista to rebuild the desktop icons by changing your monitor's color depth momentarily. In the display properties, change to 16-bit color. Then change back to 32-bit.

  • I have installed itunes 11.4 to windows vista and now I have an error; The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll.  What do i do to syn my phone

    My problem is after installing itunes 11.4 this is now a problem
    The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll
    is the first ERROR and
    some error 127 reinstall
    can you please tell me how to fix it?
    Im running Windows Vista
    All I want to do is back up my iphone 4s, so i can add my iphone 6 Very Fustrated

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • Error on installing Itunes 10.5 on Windows Vista 64 Bit

    Hi All,
    I am receiving below error when I try to install Itunes 10.5 on my Windows Vista 64 Bit ....  But was able to install 10.4.1 succesfully .
    "An error ocurred during the installation of assembly
      'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32,publ
      ickeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86". 
      Please refer to Help and Support for more information.
      HRESULT:0x8007054F"
    Please Advise .

    Its a Issue with your C++ Library on your computer, a way to fix it is to Rebuild your entire C++ Library from uninstalling the highest version to the lowest verision and reinstalling them back in chronological order..
    I would suggest to contact apple support, request a Senior advisor they should be able to get that squared away, now if your not in phone support period you will probably have to pay for support.
    I'd suggest the apple care if you havent got it yet

  • Installing Itunes 9.2 on Windows Vista

    I just got done installing the new software update for my 3G iPhone and iTunes told me the phone required iTunes 9.2 or later. Sometime during the installation of iTunes 9.2 a message comes up saying, "There is a problem with this Windows Installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor." Not knowing what either of those are, I'm kinda stuck. What should I do?

    Updated to iTunes 9.2 and during install my network connection goes down. After install is complete, network connection never comes back. I'm on Windows Vista SP2 64-bit. Per your suggestion, uninstalled Bonjour and bounced laptop, still no network connectivity.... Help, please

Maybe you are looking for

  • Displaying carriage returns from database query

    hi i'm fairly new to colfusion but have a good basic understanding. i'm trying to build a community website that has a guestbook and forums. i want to build these from scratch. i'm using cfmx7 and sqlserver 2005. the problem i'm having is when my cfm

  • Idoc is getting posted successfully but no table entries found in but000

    Hi Abapers             IM working on CRM Business partner data Migration using LSMW idoc method with Message Type  CRMXIF_PARTNER_SAVE_M Basic Type  CRMXIF_PARTNER_SAVE_M02 i can see the status as 53 i.e crmxif_partner_save function module got post

  • PU Ordered quantity exceeded by 123,456

    Hi, I have selected the default value for 'Propose all items' in the MIGO settings option, to enable early GR against a Scheduling Agreement. Now, When i try to do a GR with MIGO i am getting the following error message: PU Ordered quantity exceeded

  • Determine distribution of GOA as a Contract or a Schedule Agreement

    Hello, We are using SRM 5.5 Server and R/3 4.7 as a backend system. Uptill now we have distributed our GOA by maintaining the same transaction type on SRM and the backend for contracts. However now we have a requirement to be able to distribute GOA a

  • Dependency of  EBS12.1.1 on  RHEL5 security file

    Hi All, Could you plz help me to understand the below scenario. We installed EBS R12.1.1 on RHEL5. It's installed properly and running smoothly. Now in same server we try to install SOA11g for development purpose. when try to install it's giving the