Unable to install iTunes ,it said about error code 2869.

I have a problem with my iTunes reinstallration. I try to remove the old one ,but it said about the error code 2869.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

HT1926 Unable to install itunes on windows 7. error code 2721.

I am trying to install iTunes on my PC but keep receiving the error message 2721 and then the installer quits.

It is an ongoing issue with installing iTunes 7 on Windows.
What often solve the problem is running installer as Administrator
and the opening iTunes as Administrator
Right click on the installer and "Run As Administrator"
Also as b noir mentioned - can you post the error message?
This would help.

Unable to install iTunes, I get an error saying it is unable to create the directory C:\Program Files (x86)\iTunes\iTunes.Resources\da.lproj\iPodWelcomeOffline.nib

Unable to install iTunes, I get the following error:

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Unable to install itunes 7 due to error "Bonjour service failed to start, verify you have sufficient privileges" mcafee is not blocking it, please help anyone?

I am unable to instal itunes (greater than version 7) as it gives me the error,"Bonjour service failed to start, verify you have sufficient privileges" , i have checked on apple support and the only help for this error says that mcafee antivirus is blocking the services however i have never had mcafee installed on my pc. Anyone any other ideas as to what could be wrong?

Hi doywks,
The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device. The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system. It's possible that you are not logged in as the administrator for your Windows PC. Or, you may have antivirus software stopping the Apple Mobile Device from running.
If you are having issues updating iTunes on your PC, follow the steps in the article below.
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
https://support.apple.com/en-us/HT203188
I hope this information helps ....
- Judy

Unable to install Itunes 9.2 - REGISTRY ERROR? HELP!

When I try to do a regular install it gives me a "Quicktime failed to install" error. When I try to manually install I get this
"Could not open key: UNKNOWN:\Components\6EAEE8A0BCFDED11D9EFDFB9658D5939\EB823D2BDA5429D4699F121594 A002E3. Verify that you have sufficient access to that key, or contact your support personnel."
I've had so many errors trying to install its ridiculous. Is there just a way to get a clean install? I tried installing that windows install cleanup program and removing any traces of apple/bonjour/quicktime, but that didn't work either.

I have the solution I hope!
Ok so I have had this problem for the last 5 hours with Itunes. Windows was saying that it was unable to identify the digital signature and sometimes even a win32 error.
I tried everything in the blue sky that I could google trying to find a solution to no avail. I also tried all kinds of different tricks such as cleaning my registry, using msconfig to stop startup programs from running, making a different account and trying to install it from there, and everything on apples website and NOTHING helped
The most ridicilous thing did work though. I was able to Download and install Quicktime by itself. Then after i installed quicktime i just went into search in windows and typed "Apple" then clicked on the apple software updater (you can get there manually through quicktime too) and it checked for updates and asked me if i wanted to install itunes I clicked yes and then it downloaded and installed it and then after the prompt to restart my computer it was there. Simple and quite stupid if you ask me.
I hope this works for you too

Can't install iTunes on Windows 7 - error code 2329

I just installed Windows 7 on my computer and now am trying to re-install iTunes...I uninstalled it before upgrading from Vista to 7 because a compativbility scan said that iTunes could cause problems with the installation of Windows 7
Now, after saving and running the iTunes installer on my computer, I get error code 2329 while trying to install. I believe this happens when it is trying to initially install Quicktime, which I actually still have installed on my computer...
I have tried uninstalling Quicktime, but I get the same error code during that process
I have also tried installing iTunes by going to the Apple Software Update instead of saving and running the file from the internet, but it fails also....
Please help!

Now, after saving and running the iTunes installer on my computer, I get error code 2329 while trying to install. I believe this happens when it is trying to initially install Quicktime, which I actually still have installed on my computer...
The 2329 appears to be associated with file/disk damage, lora (much like the more-common 2330).
So we should try first running a disk check over the drive your QuickTime program files are stored on. For instructions, see:
[How to use CHKDSK (Check Disk)|http://www.w7forums.com/use-chkdsk-check-disk-t448.html]
Try checking both boxes. The scan should take quite a while. If the scan aborts fairly quickly (even if you do it on Start-up), try rebooting the PC, disconnecting from your network and/or the internet, and disabling all security software on the PC (firewall/antivirus/antispyware) prior to doing the disk check. (Real-Time scans of your drive by your security software can interfere with disk checks.)
Reenable all your security software prior to reconnecting to your network and/or the internet.
Does the disk check find/repair any damage? If so, are you able to do the iTunes install afterwards?

Unable to install SQL Server 2012 Standard: Error code 0x851A0019

Hi All,
I am trying to install sql server 2012 standard edition on windows server 2008R2 but at the end of the installation it is giving me the following error message:
"The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes."
And in the log file I got the following error message:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
(I have posted part of the log file)
Need your help to resolve this issue.
Thanks,
MKNayeem

Hi,
Thanks for your reply.
I have already followed that article. I have changed the user to local account user, but it did not work.
Like you said the sql server is installed, but it is not starting the services. Following is the error log file message:
2015-03-16 10:12:15.27 Server Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2015-03-16 10:12:15.27 Server (c) Microsoft Corporation.
2015-03-16 10:12:15.27 Server All rights reserved.
2015-03-16 10:12:15.29 Server Server process ID is 5724.
2015-03-16 10:12:15.29 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2015-03-16 10:12:15.29 Server Authentication mode is MIXED.
2015-03-16 10:12:15.29 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG'.
2015-03-16 10:12:15.29 Server The service account is 'NT Service\MSSQL$BNG1SECISO'. This is an informational message; no user action is required.
2015-03-16 10:12:15.29 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\mastlog.ldf
2015-03-16 10:12:15.29 Server Command Line Startup Parameters:
-s "BNG1SECISO"
2015-03-16 10:12:15.57 Server SQL Server detected 2 sockets with 1 cores per socket and 1 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-16 10:12:15.57 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-16 10:12:15.57 Server Detected 16383 MB of RAM. This is an informational message; no user action is required.
2015-03-16 10:12:15.57 Server Using conventional memory in the memory manager.
2015-03-16 10:12:15.67 Server This instance of SQL Server last reported using a process ID of 2452 at 16-03-2015 07:03:13 (local) 16-03-2015 01:33:13 (UTC). This is an informational message only; no user action is required.
2015-03-16 10:12:15.67 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2015-03-16 10:12:15.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-16 10:12:15.69 Server Software Usage Metrics is disabled.
2015-03-16 10:12:15.70 spid6s Starting up database 'master'.
2015-03-16 10:12:15.78 Server CLR version v4.0.30319 loaded.
2015-03-16 10:12:15.82 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-16 10:12:17.36 spid6s Error: 824, Severity: 24, State: 2.
2015-03-16 10:12:17.36 spid6s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:377; actual 261:2228225). It occurred during a read of page (1:377) in database ID 1 at offset 0x000000002f2000 in
file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and
must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Thanks
MKNayeem

Unable to install itunes due to 80070422 error using Win7?

Please, please, please can someone help me resolve this error when trying to load itunes 10 - have tried everything , reg fixers, reinstalling windows components etcetc but still can not fix. The only thing left is to reimage - and not want to go down that route. Can any one help please?
I am using Win7.
Have retried with Visual C - but still same - have spent most of day trying to find cure - but getting nowehere. Have also problems with auto update asking to update same three files - yet each tme saying successful. I really dont want to use the system recovery disc as will wipe out all my files and settings. Appreciate any other advice please?

Hello laguiole,
The following article may be helpful in getting iTunes updated.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/HT2311
Cheers,
Allen

Unable to install itunes and quicktime both error occur: system cannot open signified folder

my pc's specifications are : dual core processor, 1 gb ram,windows xp sp2 (os), 300gb hard disk

I have just found a way of sending some feedback to
Apple.
Will be interested to see what they say to this>>
I find it ridiculous that the cost of these ipods
does not include some on line support from Apple. We
have to try and rely on other users in discussion
forums. All I am finding is there are loads of others
on thee forums with similar problems unable to find a
solution.
Please advise.
Also found a number for 'tecnical support' after 5
days trying....
0870 876 0753
Will give them a 'polite' call tomorrow!!!!
Thanks for the phone No. I was having a problem with Quicktime which I couldn,t resolve by checking the discussion forums but that phone No. was a great help. Alhough you are talking to a call centre somewhere in the world and have to be careful with the language difficlties it was a help and it,s a shame Apple don't make this No. more easily available, so well done for finding that No.
You can go days or even months for a solution and I think Apple should have an online Tech. expert to help out.
Dell Windows XP Pro
Dell Windows XP Pro
Dell Windows XP Pro

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195",public key token 1fc8b 3b 9a 1e 18e 3b",processorArchitecture="x86".Ple

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Unable to install iTunes on Widows 7. Error: A DLL required could not be run. What now?

I am unable to install iTunes on Widows 7. I get this Error Message during installation: There is a problem with this Windows Installer Package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor.
What now please?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

TS5376 Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges. I am the administrator. I have tried everything I can think of.

Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges. I am the administrator. I have tried everything I can think of. When I click the ingore option it doesn't install corectly and I get a message saying MSVCR80.dll file is missing.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1349 I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.

I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times. I keep getting the error message to reinstall to fix the problem.

See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553

Unable to install iTunes ,it said about error code 2869.

Similar Messages

Maybe you are looking for