Unable to install iTunes on my Windows 8 PC

I am trying to install iTunes (64 bit) on Windows 8 PC. In the middle of the installation, it throws up an error message like this
I click ok, and proceed. It says, "Rolling back action". It then proceeds with the installation. When the status says - Starting Services, it again throws up a message like this:
Retry keeps taking me back to this same screen again.
If I click on Abort, it restarts the installation again, and I land up at this same page again.
If I click on ignore, it shows iTunes successfully installed, but when I open, it throws these 2 error messages
Can anyone help me in troubleshooting this issue?
Any pointers in what could the issue be, would be of immense help.
FYI, I am running the installer as an administrator.
Regards,
Narayan

Hi Matt, and thanks Narayan for the question.
I am running Windows 8 on my Macbook Pro (2012) via Parallels 8. After quite a bit of patience tested with patches and updates, everything worked fine. But as with Windows, after an update, there will be problems with programs. Running Parallels is very cool, but the downside and truth is that every now and then you will find that the Windows 8 virtual machine does not work as it would on a conventional PC. My iTunes (v11+) worked fine until it detected a potential conflict with another CD/DVD app I installed (either VLC or PowerDVD) and everytime I launched it, an alert would indicate that the Registry for iTunes has a problem as a result and that I should reinstall iTunes. I hesitated doing that because for the most part, my iTunes worked fine (synchs my iPhone 5 on Windows), while my Mac iTunes synchs my iPod Classic 160GB. Now, I have tried three times to down and install iTunes in my Windows 8 virtual machine but three alert window pop-ups appear, and all result in a failed installation. This means, I will not be able to synch my iPhone 5 to my Outlook for the time being and poses a real serious problem in my day to day lifestyle.
First window alert after trying to open installation package:
Because I had cleared my cache with the earlier version of iTunes installed, using Browse, I could not locate those files. So clicking OK, leads to:
Then after clicking OK to clear this message, it leads to:
I am not an engineer and can't tell what the software implication is for these messages. I suppose, it is a Windows and not a iTunes problem, and I may have to take this problem to a Windows Support community. But I just thought to post it here in case, someone has a solution and might just share it still.
Now, I am going to try and remove my VLC program and try re-installing iTunes. But the way I understand the last two window messages, there seems to be a problem with the software trying to connect with Apple while the installation is taking place ("network resource") although my Internet access is definitely working at the time.
Any ideas? Unless this is another Parallels 8 issue, and neither Windows 8 or iTunes!
Tom

Similar Messages

  • I am unable to install itunes in my windows 7 laptap. Getting 2349 error code while installing itunes. Any suggestions to overcome?

    I am unable to install itunes in my windows 7 laptap. Getting 2349 error code while installing itunes. Any suggestions to overcome?

    Is this the error your gettings?
    If so, remove the installer, and redownload the itunes set-up installer
    www.apple.com/itunes/download
    Message was edited by: keeferaf

  • Hi I am unable to install itunes on my Windows 8 64 bit PC, can you help please

    Hi I am unable to install itunes on my Windows 8 64 bit PC, can you help please

    Many thanks.
    the message I get says unable to remove old version of itunes
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Unable to install Itunes, Win-XP, Windows Installer error 1722.

    When I install itunes on XP-SP3 (fully updated) with Windows installer 4.5 - I get this message half the way through -refer to attachment-
    I have uninstalled all apple products, installed quick time - this installed but still provided the error. I have extracted the package and attempted to install each product seperatly however it provides this error only while installing the Apple Software Update. The error code comes from the event viewer.
    Any help would be greatly appreciated.

    This is a serious error. With out fixing this we cannot install itunes on the system. Any help please. Thank you.

  • I am unable to install iTunes due to Windows Installer error message on Vista

    I needed to update my iTunes since I purchased the iPad2.  My Windows Vista machine will not allow me to update the program due to a "Windows Installer" error message.  I first attempted to update, then I uninstalled and am unable to reinstall the software."There is a problem with this Windows Installer package. A program required for this install to complete could not be run..."

    I finally got the program to install/run.  I downloaded a third copy and saved it again on the desktop.  I selected "Run as Administrator" instead of "Run"  It must have been the 10th plus time I tried to install, but this time it completed.  I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.

  • Unable to install itunes 64it, on windows 7, stops at "unscheduling apple software update"

    The installation goes on fine, until it begins the "unscheduling apple software update" proccess,  at which point I get a message saying; "There is a problem with this Windows Installer package. A program required for this install to complete could not be run.
    Any ideas anyone?

    When I hit repair for it I get a message saying "The feature you are trying to use is on a network resource that is unavailable",
    And when I tried uninstall, it occurs exactly as the original error.
    So this is probably damage to the AppleSoftwareUpdate.msi (or associated gubbins in the Windows Installer Service installation database for ASU).
    Let's try clearing away the existing broken ASU, and seeing if that lets us get iTunes in.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up").
    In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp and restart the PC. Download a fresh iTunes installer from the Apple Website:
    http://www.apple.com/itunes/download/
    Does that install go through any better?

  • Unable to install itunes 11.1 Windows Vista

    Downloads then when tries to install.....ERROR. I have tried downloading directly from web but it has been sitting gathering required information performing installation tasks window for over an hour. I have disabled Norton....rebooted....nothing allows it to install. All went well on a Windows 7 machine. So assuming its something with Vista. AND I am up to date with all service packs and Windows updates.

    See if this post from turingtest2 helps : https://discussions.apple.com/message/24620553#24620553
    He's also produced this user-tip for trouble-shooting updates to iTunes on Windows : https://discussions.apple.com/docs/DOC-6562

  • Unable to install itunes in windows 7 64 bit - hanging

    Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
    Also i am unable to uninstall Apple update software. Are these both related.
    Now how do i get the software installed( itunes installed in windows 7)

    Hey gigipramod,
    Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • Unable to install iTunes 11.1.4.62 on Windows 8. I get Service "Apple Mobile Device" (Apple Mobile Device failed to start.  Verify that you have sufficent privileges to start system services.  I am trying to install this on my desktop not a mobile device.

    Unable to install iTunes 11.1.4.62 on windows 8.  I get
    Service "Apple mobile Device) failed to start. 
    Verify that you have sufficient privileges to start system services.
    I am trying to install it on my desktop.  I am also in Administrator mode.  My iTunes stopped working when I was notified that there was a new version of iTunes and would I like to download it. I said yes as always and it was unable to finish the update because of a
    runtime Error!
    Program: C:\program Files (x86)\iTunes\iTunes.exe
    R6034
    An application has made an attempt to load the C runtime library incorrectly.
    Please contace the application's suport team for more information.
    My iTunes stopped working at this time.  I thought I could delete iTunes and start over. This tactic did not work.
    Can anyone make sense of what I am saying and help me to get my iTunes back again?

    Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Unable to install itunes 10.4.1 on my dell laptop windows 7 64 bit

    Hello
    I am unable to install itunes 10.4.1 on my dell laptop windows 7 64 bit:
    i have tried to install itunes on my windows 7 64 bit dell laptop, and everytime it says installation successfully installed, but i can't find the files anywhere in the computer, i searched all the locations, desktop ... but nothing found.
    Troubleshooting Done:
    - Tried different itunes versions; didnt work.
    - Tried to install on different locations on my computer.. C:, D:...  didnt work.
    - I empty Temp files from all users on my computers who are (Me & Admin) only; didnt work.
    - i removed all related apple files; same.
    - Uninstall all apple related support ... etc..; didnt work.
    - I have Admin access to all my files and also tried to install from Admin account; didnt work.
    I don't know what else i can do, please advise me on how to fix it, i need to backup my iphone & ipad ASAP.
    Please contact me via email, phone anytime and as soon as you can.
    Thanks for your support
    Ashraf Badi
    <Personal Information Edited by Host>

    Hi Nitro,
    Tried your advise but that too failed. Problem still continues. Again that same error  "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor".
    Please advise.

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Unable to install itunes 10,5.I receive this message: there is a problem with this window installer package. A program required for nthis install to complete could not run. Contact your support personnel or package vendor.Am using window ultimate 64 bits

    I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits

    There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • I am still unable to install itunes in Windows Vista

    I have tried to run Fix it 4 times now after doing other things suggested in the Apple community and I am still unable to install itunes. Do you have any other ideas?
    I've been uninstalling/reinstalling and using CCcleaner, sfcscannow and nothing seems to correct error msg 2- corrupt files found/unable to fix.  Now what??????
    I am using windows Vista.  I NEED help!

    nothing seems to correct error msg 2
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195",public key token 1fc8b 3b 9a 1e 18e 3b",processorArchitecture="x86".Ple

    I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD

    I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
    I also found this in another post
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

    I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

    I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
    I also found this in another post
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Maybe you are looking for

  • Satellite A200-195: What CD/DVD drive is compatible?

    Hey Guys and gals, I have had a look and asked Toshiba but no answer given so thought I would ask the experts here. My DVD RW in my laptop TS L632D Has died and I need a new one. So what one can I buy and fit without problems. These drives are known

  • HTTP time out Error in BPM.....

    Hi Error Description: We have created a Sync-Async Bridge BPM scenario in XI. In the BPM scenario we are calling the web service, and if the response from the web service is an error message then we have retry in a loop up to 24 times after wait for

  • Error 95 percent oracle 11g r2

    hi everyone, i have a problem with my oracle 11g. when i use runinstaller to install the software and the database, it always stop on 95 percent. i cant create the database. someone know why?, the only thing that i can see in the log file is this one

  • Snapshot Versions - Notes - cProjects

    Our user plans on using snapshot versions weekly to track changes to their project.  They want to see the notes captured in the snapshots.  We just realized that the notes are not being saved in the snapshots.  Is this a bug?  Is there a way to have

  • (Loader Class AS3) How to check load fail?

    Hi everybody, I have used Loader Class to load a JPEG file into my Flash movie during runtime. my_loader.contentLoaderInfo.addEventListener(Event.COMPLETE, startListener); my_loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressL