Unable to install JRE 6U3

I have been unable to update or remove my java application in windows Add/Remove function. This is the error message I get when I attempt to automaticly download update. If you encounter an error, check the top of the browser (see image above) for a yellow bar that reads "This site might require the following ActiveX control: J2SE Runtime Environment 6 Update 3 from 'Sun Microsystems, Inc.'. Click here to install..." Click the yellow bar and choose "Install ActiveX Control..." to allow installation to proceed.
Manually nothing happens. Any suggestions. Been crusiinf forums and have found similar problems but no useful solutuions.......

If you go to Control Panel and use Add/Remove Programs, all that happens is that the Sun install software runs and allows various install options or the option to reinstall. Nowhere is 'uninstall' mentioned.
The only choice AT YOUR RISK is to delete the software folder, e.g. C:\Program Files\Java\jre1.6.0_03 and then clean up the registry. I use Norton SystemWorks 2003 (old but good) which will remove approximately 267 registry entries relating to jre1.6.0_03. I also run PC Tools Registry Mechanic (v5.2 in my case) which is a trusted registry cleaner to finish the cleanup. I always run SystemWorks 2003 before Registry Mechanic.
I then use some software - Innovative Solutions 'Advanced Uninstaller 4' - using the 'forced removal' option to get rid of the entry for the program (jre.1.6.0_03 or whatever) which appears in Add/Remove Programs. I imagine that a trip with regedit would get the same result but I don't need to with 'Advanced Uninstaller 4'.
This has worked on two previous occasions without ill effect.
It is all highly irregular and utterly ridiculous that Sun make it necessary to do it this way. Someone signed this absurdity off. Will he/she please own up.

Similar Messages

Am unable to install JRE version 6 update 27

Am trying to install a new version of Ubuntu on desktop. Have read that I should install Java first. Am unable to install Java Runtime Environment version 6 update 27. Do I need Java Script in order to install? Currently seem to have no version of Java on computer.

Hi PJA01,
I'm sorry that you experienced technical issues.
In order to better understand the cause of the problem, could you please provide me with following information?
1. Can you tell me a little about your network connection? For example, are you connected from home using your internet service provider, at work using work network, or at home connected through VPN?
2. Does your connection go through proxy server?
3. Are you using some kind of firewall? Is it personal or corporate firewall?
4. OS that you are using
5. Browser and browser version you are using.
Thank you,
-Yuko C
Adobe Systems Inc.

Unable to install JRE 6u24 at Windows Vista 64 bit

Hej
When I start I see a dilalog window popup and then it is removed imeediately. I am not able to see the text. Then nothing happens. When I go through all running processes I see that 3 instances of msiexec.exe have started. One of them takes 13% of the CPU and will run for ever.
Any suggestions?
Regards
Anders

Do the following:
1. Ensure that you are a member of the Windows Administrators group. If not, you will not be able to perform the installation.
2. Ensure that any previous attempts to install have been terminated (refer to the Task Manager)
3. Decrease or disable UAC. Refer to http://windows.microsoft.com/en-US/windows-vista/Turn-User-Account-Control-on-or-off
4. Once you have completed the above (reboot may be necessary), right mouse click on the JRE installable you downloaded (i.e. jre-6u24-windows-i586.exe). Select "Run as Administrator"
Be sure to do this from the local machine and not a remote machine. For example do not do this using VNC, Remote Desktop Sharing, ect.
Also, if you have older JRE versions installed, I would recommend uninstalling them and rebooting first.

Unable to find an installed JRE or JDK of version 1.4 or higher

hello friends,
i have facing an error when i tired to install JEdit setup and i hav faced this error before also but what is this error...
*"unable to find an installed JRE or JDK of version 1.4 or higher"*
I have installed jdk5 and i have set Environmet variables as below
JAVA_HOME: E:\JAVA_ALL\JDK\jdk5.0
and in path---->
PATH: %JAVA_HOME%\bin;%JAVA_HOME%\lib\tools.jar;
* do i need to give any thing more than this...?
thax in Adv.
Ajay

http://community.jedit.org/

Unable to install 1.6.0_17 JRE in Linux FC12

Hi,
I am having Linux FC(Fedora) 12 - 64 bit system. I am trying to install JRE 1.6.0_17, and get the following error when trying to install ( jre-6u17-linux-x64.bin).
Do you agree to the above license terms? [yes or no]
yes
Unpacking...
Checksumming...
Extracting...
./jre-6u17-linux-x64-rpm.bin: line 368: ./install.sfx.3884: cannot execute binary file
I also did the chmod a+x jre....
Can anyone help to respond to this issue,
THanks
Kuga

This forum is about tools in Sun Studio (now Oracle Solaris Studio), a program development suite for C, C++ and Fortran.
Your question seems to be about using Java, not Sun/Oracle Studio. Please try an appropriate Java forum here:
[http://forums.sun.com/index.jspa?tab=forum]

Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0

Hi all,
I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
Here's the actual (make failure) log entry:
gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
Richard Foley
ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
*** End of Installation Page***
The installation of Oracle Developer Suite 10g was successful.
Edited by: orafoley on Oct 14, 2008 5:19 PM

Hi Hub,
Done that, nothing:
$> env | grep -i LD
$>
On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
Oracle 10.2.01
Oracle Developer Suite 10i (ODS 10.12.02)
SuSe 11.0
Now when I runInstaller I get this, which is surprisingly similar:
Start output from spawned process:
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
/usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
-lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
Richard.

Unable to install Oraclei 8.1.7 on P4 machine

I am unable to install the above version of Oracle on a IBM P4 machine with 256 MB RAM.
Got the following message while installing:
JRE was not found at:
d:\software\Oracle8i\stage\components\Oracle.swd.jre/1.1.7.24/1/Datafiles/Expanded/jre\win32\bin\jrew.exe
Install jre 1.1.7 or above and continue.
After getting the above message, I installed jre 1.1.8_09.
Inspite of this, the installation is not commencing.
The documentation is silent of this. However, it does mention that that it may possibly happen with a Novell Netware system due to the filenames being restricted to 8 characters.
I did try this out to and named the installation directory of jre with 8 characters. But the problem still persists.
Looking forward to a solution from some Oracle gurus.
Thanks in advance.
Girish

Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the post-install
configuration tools will also be affected. Running these tools with "-nojit"
specified will avoid the hang, but it is not simple to specify "-nojit" for
some of the products.
The following workaround works for the Windows operating system:
a. Copy only the install directory from the CD to the hard disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications (Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard drive (i.e.
e:\temp\install\win32\setup.exe). This will use the modified
oraparam.ini and pick up the information from the CD since the absolute
locations are specified.
Choose a Custom install and choose not to create a database during the
install. This way, the Database Configuration Assistant will not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and there is no way
to suppress it. You will need to kill the Net8 Configuration Assistant if it
hangs due to the bug. The installation still will have been successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8 Configuration
Assistant" and click "Stop". If that does not work, look for the most recent
JRE process using the Task Manager, and kill it manually. NOTE: the OUI
itself will also have a jre process. Be sure to kill the one with the most
recent date, which should be the jre process being used for Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through the installation
to the "End of Installation" screen, you should modify the configuration tools
to use "-nojit", then call the appropriate tools from the Start Menu.
Once installation is complete, each of the following files in the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit -classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from the Start Menu.

Unable to install weblogic 6.0

hi,
I am unable to install weblogic6.0 on sunos 5.6, sparc platform, below
is the message. could somebody throw some light on how to proceed.
Arun.
# sh weblogic600_sol.bin
Preparing to install...
Error: failed
/tmp/install.dir.24974/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
because ld.so.1:
/tmp/install.dir.24974/Solaris/resource/jre/jre/bin/../bin/sparc/native_threads/java:
fatal: libCrun.so.1: open failed: No such file or directory

Hi i successfullyinstalled weblogic 6.0, the reasons solaris patches required to run java
1.3. Try to install jdk1.3 first to make sure weblogic installation goes fine.
Arun wrote:
hi,
I am unable to install weblogic6.0 on sunos 5.6, sparc platform, below
is the message. could somebody throw some light on how to proceed.
Arun.
# sh weblogic600_sol.bin
Preparing to install...
Error: failed
/tmp/install.dir.24974/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
because ld.so.1:
/tmp/install.dir.24974/Solaris/resource/jre/jre/bin/../bin/sparc/native_threads/java:
fatal: libCrun.so.1: open failed: No such file or directory

WebStart 1.4.2 doesn't find installed JRE for 1.4.2 ?

I have installed J2RE1.4.2_04. As far as I can tell, it works just fine and there are registry keys set for
Java Runtime Environment for 1.4 and 1.4.2_04 which are set to the same thing. However, when I
run my webstart app, I get an error with the general information that "The application has requested a
version of the Java 2 platform (JRE) that is currently not locally installed. Java Web Start was unable to
automatically download and install the requested version. The JRE version must be installed manually."
Having turned tracing and output on, I look in the log and see
javawsApplicationMain: Installed JRE: null
So, for some reason, WebStart doesn't think I have an installed JRE. Could someone tell me why?
I have tried various incantations of version, such as
<j2se version="1.4.2_04"/>
<j2se version="1.4.2"/>
<j2se version="1.4.2+"/>
<j2se version="1.4.2*"/>
All of these result in the same error. If I try either of
<j2se version="1.4+"/>
<j2se version="1.4"/>
WebStart recognizes that I do in face have a JRE installed, but then I have other problems. I would
prefer to get the 1.4.2 problem fixed first since I require 1.4.2 and some boxes have 1.4.1 on them.
Thanks for any ideas!
: jay

This is confusing and done poorly in my opinion but the only "versions" of Java 2 are 1.2, 1.3, and 1.4 (1.5 is coming). If you specify anything past those (as your first four examples do), Web Start assumes a product specific version and you have to provide a URL to download it. Even if it is on the machine, Web Start downloads the version and stores a separate copy of it.
See http://java.sun.com/products/javawebstart/developers.html#auto for details.
I think the only thing you can do if multiple versions of 1.4 are installed is go into Web Start preferences and uncheck the box so it is not enabled.

Unable to install Component Development Tool??

Hi,
I am trying to install Component Development Tool on Eclipse Juno on 64-bit machine(Windows 7)
I set my path variable to "D:\Program Files\Java\jdk1.6.0_26\bin".
In eclipse I configured windows-->preferences-->compiler to 1.6 and Installed JRE's to "D:\Program Files\Java\jdk1.6.0_26\jre" and confirmed default Java verison is 1.6 by using java -version in the command prompt.
Downloaded the archive "lcwcdtool_p1_050710" and while installing I am getting the following error:
"Cannot complete the install because one or more required items could not be found.
Software currently installed: Adobe Component Development Tool 9.5.0 (com.adobe.livecycle.cde.feature.group 9.5.0)
Missing requirement: Cde Plug-in 9.5.0.v201005062331 (com.adobe.livecycle.cde 9.5.0.v201005062331) requires 'bundle org.eclipse.emf.codegen 2.3.0' but it could not be found
Cannot satisfy dependency:
From: Adobe Component Development Tool 9.5.0 (com.adobe.livecycle.cde.feature.group 9.5.0)
To: com.adobe.livecycle.cde [9.5.0.v201005062331]"
Can anyone suggest how to proceed...

Hi,
This error was resolved by installing 32-bit java and Eclipse 3.4, but after successful installation of Component Development tool I'm unable to get component development environment. I'm unable to get below mentioned environment(I'm unable to find New LiveCycle in File-->New-->) in eclipse.
Please suggest....

Trying to install JRE 7u7

Hello,
I'm trying to install JRE 7u7 x64 and am having a few problems.
I can run the installer and its fine until it begins to install. Then an error message appears saying:
"The feature you are trying to use is on a network resource that is unavailable."
It is referring to "C:\Program Files\Java\jdk 1.7.0_02\\", which doesn't exist on my computer.
It then comes up with Error 1714:
"The older version of Java 7 Update 7 cannot be removed."
The installer then quits.
Because of this I cannot run any .jar files at the moment.
Is there any way I can fix this and install a working JRE?
I've successfully installed the JDK 7u7 x64 and u2 previously.
I had JRE which worked OK before this but it suddenly stopped. I'm afraid I'm not sure whether it was 7u2 or version 6.
Thanks for any help.

Hi Varun,
I am using Safari.
I go to the Adobe web site, then download the latest Flash Player for Mac/Safari.
The file below appears in my Download File.
I am then unable to open the download and proceed. I get no error message.
Thanks,
Steve

Unable to install Oracle 8i Personal Edition in Windows98 with Pentium4

I am getting error "Performed illegal Operation" when ever I
unzip and install Oracle 8i PE 8.1.7 for windows98. Error is
JREW caused an invalid page fault in module JAVAI.DLL,
suggestions was install new JRE Version. I have tried to format
hard drive (twice) thinking some software incompatibility, no
go. remove devices, no go. After further analysis it seems there
is issue installing 8i databse Personal Ed. in Pentium 4
processor with an Intel motherboard latest Bios. I have
downloaded and installed JRE Version 1.1.8_008, still no go.
What am i missing? Please advice or suggestion. Thank you. Email
me- [email protected]

I am unable to install 8i personal edition Release 3 onto my W2K machine. I download the zip file and unzip it into (c:/OracleInstall) a folder I have created on my c:/ drive. When i click on the setup.exe file it opens up. When I click on the install button the GUI disappers and nothing occurs. I have attempted to burn it onto a CD_Rom and install through the control panel and the same occurs.
I am not sure what is causing this problem. Is there any why I could request the software in a CD as opposed to a zip file? What could be causing this problem? Is the machine a P4? there is a known problem
I don't know about his machine, but mine is a P4. Where do I find this information about this problem? And is there a fix? I need to install the NET8 Assistant.

Unable to install Qlogic San Surfer. Anyway to get Qlogic HBA WWN numbers?

Hello,
I've got Oracle Virtual Server 2.2.1 installed and have some Qlogic HBA's. I need to get the WWn of the HBA's. I have downloaded the SanSurfer latest release from Qlogic and am unable to install it.
[root@entsysovs4 ~]# sh ./sansurfer2.0.30b81_linux_install-i.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: cmd. line:6: warning: escape sequence `\.' treated as plain `.'
Launching installer...
Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)
Stack Trace:
java.lang.UnsatisfiedLinkError: /tmp/install.dir.20419/Linux/resource/jre/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
     at com.zerog.ia.installer.LifeCycleManager.f(DashoA8113)
     at com.zerog.ia.installer.LifeCycleManager.g(DashoA8113)
     at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
     at com.zerog.ia.installer.Main.main(DashoA8113)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.zerog.lax.LAX.launch(DashoA8113)
     at com.zerog.lax.LAX.main(DashoA8113)
This Application has Unexpectedly Quit: Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)
Any ideas?

Greetings,
Please review the "SAN Storage Repository Configuration" section of my book for a detailed review of how to setup your SAN using dm-multipath:
http://itnewscast.com/chapter-6-oracle-vm-22-san-iscsi-and-nfs-backend-storage-configurations#SAN_Storage_Repository_Configuration
FYI, You would need to check with your Oracle VM sales consultant or Oracle support to validate "if" Qlogic San Surfer is supported in dom0.
Respectfully,
Roddy

Installing JRE

Exactly what administrator permissions are required to install the JRE on a Windows 2000 machine? My users are unable to install the JRE on their machines, because they apparently do not have the proper permissions, even though they have been told by their tech Nazis that they have "administrator" privilages.

Yes, according to java.com installation instructions for Win2000,
-- Begin copy
Note: you must have administrative permission in order to install the Java Plug-in on Microsoft Windows 2000 and XP.
-- End copy
http://java.com/en/download/help/win_manual.jsp
And I assume this is because among other things the installation of the jre will modify the settings in the registry.

Unable to install itunes in windows 7 64 bit - hanging

Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
Also i am unable to uninstall Apple update software. Are these both related.
Now how do i get the software installed( itunes installed in windows 7)

Hey gigipramod,
Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Unable to install JRE 6U3

Similar Messages

Maybe you are looking for