Unable to install l7780 wireless driver on xp - "fatal error".

I had deleted the driver for the L7780 All-in-one because it was having issues.  Then when I went to reinstall the driver I get a pop up that reads:
MSI.MSI_BPD_Scan in the top blue box and the message below reads
Found a newer version of the same software on the machine,  Quitting.
Please go to hp.com/support for troubleshooting information about "Fatal Error" and "MSI.MSI_BPD_Scan".
I did go for support but could not find any articles that helped.
Thank you for your help.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Similar Messages

  • Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

    Hello.
    I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
    In the order what I did:
    1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
    Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
    2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
    3) I installed all the drivers:
    - both LAN and WiFi
    - Intel Chipset (latest available)
    - all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
    - Card Reader
    - Realtek HD Audio (latest)
    - Synaptics Touchpad
    - USB3.0
    - IR
    - TV-Tuner
    However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
    When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
    and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
    I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
    and followed installation instructions displayed under 'Details'
    but there was the same outcome - the setup simply freezes...
    Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
    And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
    I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
    - WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
    - resuming installation in Safe Mode;
    - *Toshiba Value Added Package* hoping those tools somehow will kick in.
    Nothing worked...
    It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
    *Using Bluetooth connection on this laptop is very crucial for me.*
    I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
    Thank you very much.
    Evgeny.
    Message was edited by: CVD
    clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

    For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
    I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
    BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
    Win7 64bit SP1
    PatchFiles V1.0
    PlayReady PC Runtime V1.3
    Sun Java2 Runtime Environment 1.6.0_20
    TOSHIBA Assist 4.02.02
    TOSHIBA Bulletin Board 2.1.10
    TOSHIBA ReelTime 1.7.17.0
    Intel Chipset SW Installation Utility 9.2.0.1015
    Intel Management Engine Interface V7.0.4.1197
    Intel Display Driver 8.15.10.2353
    NVIDIA Display Driver 267.44
    Intel Rapid Storage Technology Driver 10.1.2.1004
    TOSHIBA Supervisor Password Utility 1.63.51.2C
    TOSHIBA HW Setup Utility 1.63.1.34C
    TOSHIBA Flash Cards Support Utility 1.63.0.12
    TOSHIBA Value Added Package 1.5.4.64
    NVIDIA HD Audio Driver 1.1.13.1
    Realtek Audio Driver 6.0.1.6305
    TOSHIBA Wireless LAN Indicator 1.0.3
    Intel Wireless LAN Driver
    Synaptics Touch Pad Driver 15.2.11.1
    TOSHIBA HDD Protection 2.2.1.13
    Atheros Bluetooth Filter Driver Package v1.0.4
    Bluetooth Stack for Windows by Toshiba v8.00.06(T)
    Realtek LAN Driver 7.038.0113.2011
    Jmicron Card Reader 1.00.57.02
    ENE CIR Driver V3.2
    YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
    USB3.0 Driver 2.0.34.0
    TOSHIBA Sleep Utility 1.4.2.7
    TOSHIBA Face Recognition 3.1.9
    TOSHIBA eco Utility 1.2.24.64
    Intel Proset 14.0.2.0.1.s64_wCAT
    TOSHIBA HDD/SSD Alert 3.1.64.8
    TOSHIBA Service Station 2.1.52
    HDMI Control Manager 2.0.0.7.64
    TOSHIBA Remote Control Manager 3.0.6.1
    TOSHIBA PC Health Monitor 1.7.5.64
    ConfigFree
    TOSHIBA Web Camera Application
    TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
    TOSHIBA Media Controller 1.0.86.2
    TOSHIBA Media Controller Plug-in 1.0.6.1
    TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
    Intel Wireless Display 2.0.29T2
    PatchFiles PCIIDEREG-1.2
    PatchFiles
    I hope this will help you a bit.

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Installing 7.2. Says "Unable to install the gear driver set at this time...

    Hello, Im trying to Install ITunes 7.2, and I get this error:
    "Unable to install the gear driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again"
    I am installing ITunes for the very first time on my comp, cuz I just received a new 2GB Nano.
    I've tried rebooting,tried uninstalling my Quicktime and removing it from my comp, uninstalled and cleaned any remnants of previous ITunes using the windows cleaner, disabling both my mcafee and pccillin, and it still comes up with the error.
    I'd be indebted to any suggestions or resolutions!
    Thank you!
    E Machines T6216   Windows XP  

    Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
    If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
    Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
    Hope this helps.
      Windows XP  

  • "Unable to install the GEAR driver set at this time...."

    Hello, I have been having trouble installing iTunes. I uninstalled it because I wasn't able to put songs on my iPod. And when I tried to reinstall it, I got this error:
    "Unable to install the GEAR driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again"
    First off, I don't even have iTunes installed any more. Second, I don't know what the heck the GEAR driver is.
    Please help!
    --Jon

    When you get this message, you may need to manually remove your gear drivers, see the following post which links to full instructiosn:
    http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
    It requires editing the registry so be careful.

  • "Unable to install the GEAR driver set." in Vista Premium solution!

    If you're getting the "Unable to install the GEAR driver set." error, go into regedit, navigate to HKEYLOCALMACHINESYSTEMCurrentControlSetServicesGearAspiWDM and delete the DeleteFlag key. Run the iTunes upgrade/setup package and iTunes should install correctly.
    If you get an error about explorer.exe being open, use the Tasks section of Task Manager to stop the explorer.exe application.

    Is this 64 or 32 bit Vista?

  • Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

    Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

    Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
    If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
    Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
    Hope this helps.
      Windows XP  

  • HT1349 I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.

    I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.  I keep getting the error message to reinstall to fix the problem.

    See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553

  • Hi.  I iMac, Mac OS X 10.6.8  Lately it does not update the program.  Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

    I iMac, Mac OS X 10.6.8  Lately it does not update the program.  Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

    you will have the most up to date itunes available for your os 10.6.8. to get a newer version you will have to upgrade to a newer os.

  • Unable to install officejet 6100 driver on windows 7

    Hi I am unable to install the HP6100 Officejet All in one driver for WIndows 7 enterprise.  I keep receiving an error indicating that MSVCR90.dll is missing, but the file is there.  Any help would be appreciated.

    Hello jm092749.
    Welcome to the HP Forums.
    I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
    This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
    I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
    Thank you for bringing this issue to the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

  • Unable to install Lion - S.M.A.R.T. errors on my hard drive???

    Unable to install Lion on a 27 inch 3.06 Intel Core 2 Duo iMac running OS 10.6.8.  When I am presented with install options, my HD option is dimmed and there is a message: "This disk has S.M.A.R.T. errors.  This disk has a hardware problem that can't be repaired.  Back up as much of the data as possible and replace the disk."
    I have not had ANY problems with this iMac since purchasing it and other than being unable to install Lion it seems to be working just fine, and yet now I'm told that my hard drive is unrepairable.
    Is this a glitch in the Lion Installer or should I be more concerned?
    Any info appreciated... now it seems I've paid $30 for a download I can't use.  Grrrrrr....

    Check it via Disk Utility (in your Applications/Utilities folder) on Snow Leopard:
    If that says there's a problem, too, there's likely a problem. 
    Be sure your backups are up-to-date, and let Apple have a look at it: http://www.apple.com/retail/geniusbar/

  • Unable to Install Universal Wireless Keyboard with the CD that came with the Palm Tungsten E2 on my Windows Vista OS. Can some help? Would Appreciate it very much.

    I recently bought a Palm Tungsten E2. I have been unable to install the Universal Wireless Keyboard software that came with the E2. Went online and downloaded the version 1.13 UWK and that would not install either. What did I do wrong?
    Post relates to: Tungsten E2

    For Vista that version will not let you install programs. Good news though is we have a version you can. Go here, http://www.palm.com/us/support/downloads/windesk62.html and install this on top of the version you already have. There is going to be a few changes on the desktop, there is no quick install, but the install tool.
    Once you have that done just double click on keyboard and it will ask you your hotsync name and sync and your done.
    Oh as a side note the check if this is your solution is only if the answer solves your original question.
    Message back if you have more question or need more help
    Post relates to: Palm Z22

  • Unable to install Network Adapter Driver for Windows Server 2012

    Hi,
    We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
    Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
    Please help us to get it working.
    Thanks,
    Ronak Shah

    It is not working as the system is having Intel® 82579V Gigabit Network Card
    I guess, it's not supported on windows server 2012
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
    NOTE: The following devices do not have driver or software support for Windows Server
    2008 R2:
     - Intel® 82566MC Gigabit Network Connection
     - Intel® 82566MM Gigabit Network Connection
     - Intel® 82567LF Gigabit Network Connection
     - Intel® 82567V Gigabit Network Connection
     - Intel® 82577LC Gigabit Network Connection
     - Intel® 82579V Gigabit Network Connection
    Regards, Santosh
    I do not represent the organisation I work for, all the opinions expressed here, are my own.
    This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Blog |
    Wiki

  • Insufficient disk space, unable to install on different drive.

    I forgot to change the install path and tried installing photoshop, illustrator, and indesign on my C drive which was full.
    I uninstalled everything and switched the install path to my D drive and tried again. But now im getting an error when trying to install on D that my C drive is full.
    I'm unable to install any of these programs despite uninstalling everything including creative cload manager.
    any help?

    Okay looks like I might have solved my problem.
    Since C: was seriously full >330mb I cleared about 10 gigs.
    Seems to be installing now. Must have some kind of file the has to be installed on C either way.

  • Bought new Audigy SE, unable to install new Vista Driv

    I just bought and installed a new Audigy SE, immediatelly after turn on the computer via Windows Update download and installed the drivers and that worked fine with playback but the mic sounds in very low, I even tried to manually edit the mic boost registry but still the mic is practically useless. These are the drivers:?[img"]http://img.photobucket.com/albums/v385/javiersf/AudigyDrivers.jpg">?Another trouble: At the same time Windows Updated downloaded the Audigy Vista, I downloaded the new Audigy drivers for Vista posted on June 25th, but when I try to install them I receive this error message:[img"]http://img.photobucket.com/albums/v385/javiersf/ErrorVistaDrivers.jpg">?I even restored my system just before the windows update driver was downloaded and installed but?still I receive this error. I tried to manually delete the drivers, uninstall the audio card and the restore it, but still I am getting this error and I'd like to take advantage of this driver and software to see if that will fix the problem with the low power mic.

    @javiersf; if I were you, I would give back that soundcard back and wait further for some support from Creative. 'cos , there is not a good support for Audigy users, especially for "LS/SE/Value" users; I don't recommend that card to anyone.
    BTW, there is not a driver for Mic Boost, since the first Vista driver released. You should find an alternati've way (like using mic from Onboard sound card) or you have to use your mic like it's now.

Maybe you are looking for

  • Enhance 2lis_03_bf

    I need to enhance the extractor 2lis_03_bf but rsa6 not applicable on this extractor, say "DataSource 2LIS_03_BF does not allow append structures" use tr. LBWE but I need use add field what not content in enhance LBWE Can I enhance 2lis_03_bf in tr.

  • IBook VGA to TV Input

    Hi All, I've just purchased a VGA to s-video/rca adapter (Strait Wire, no electronics) and I Plugged it into my iBook G3 600MHz 10.4.2 with the Apple supplied mini video to vga adapter. Well, it recognized a connection and brought up the appropriate

  • BADI for BP Search

    hi experts, we are implementing CRM 2007, we have already implemented CRM 4.0, Winclient, in CRM 4.0 the BADI - CRM_IC_BP_SEARCH, is triggered for duplicacy check in winclient when agent tries to check for BP existing or not. as CRM 2007 is having We

  • HT5192 after 5.1, still people can't hear me why?

    Still other people can't hear me after iso 5.1. Why?

  • Cheapest way to buy final cut studio 2

    Hi there, I live in Australia and want to work out the cheapest way to legitimately and legally buy the full version of final cut studio 2 and think I have worked it out, but wanted to sanity check with others. My idea is to buy a new copy from ebay