Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

Hi Guys,
i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
Hp device Model.:- hp pavilion g4 1303au
Model no.:- 5c03213jsh
network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
Name: PCI Device
Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
Name: SM Bus Controller
Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
thanks,
Amit Rai

Hi:
SMBus controller:
Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install.
Download and unzip the file.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Ethernet: Download and install the 1st driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Card reader (PCI dev.): Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
Wireless: You will have to try the Vista driver for the Atheros wireless card...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
Attachments:
sp66185.zip ‏7 KB

Similar Messages

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Unable to install Network Adapter Driver for Windows Server 2012

Hi,
We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
Please help us to get it working.
Thanks,
Ronak Shah

It is not working as the system is having Intel® 82579V Gigabit Network Card
I guess, it's not supported on windows server 2012
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
NOTE: The following devices do not have driver or software support for Windows Server
2008 R2:
- Intel® 82566MC Gigabit Network Connection
- Intel® 82566MM Gigabit Network Connection
- Intel® 82567LF Gigabit Network Connection
- Intel® 82567V Gigabit Network Connection
- Intel® 82577LC Gigabit Network Connection
- Intel® 82579V Gigabit Network Connection
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own.
This posting is provided AS IS with no warranties or guarantees and confers no rights.
Blog |
Wiki

Probems with msi 875p neo Fis2r and network controller driver

Hi guys just wondering if anyone could help me with my msi 875p neo FIS2R and problems with the network controller driver/network card.
I'm running xp on a computer my nextdoor neighbour gave me. I got it working fine with service pack 3 installed but then installed a bunch of windows updates last night and the computer would switch itself off before windows could start. Now I reinstalled xp and unfortunately it does not recognise the network controller/card at all now. I tried installing the intel network controller drivers but it stopped because it said no intel adapter/card was installed/present. Could anyone please help with suggestions? I tried running everest and under newtwork it doesnt list intel network adapters but I'm pretty certain it is. Again any suggestions?
--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]
Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2800 MHz (14 x 200)
Motherboard Name MSI 875P Neo-FIS2R (MS-6758) (5 PCI, 1 AGP, 4 DDR DIMM, Audio, Gigabit LAN, IEEE-1394)
Motherboard Chipset Intel Canterwood i875P
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (10/11/04)
Partitions:
C: (NTFS) 238464 MB (200326 MB free)
--------[ DMI ]---------------------------------------------------------------------------------------------------------
[ BIOS ]
BIOS Properties:
Vendor American Megatrends Inc.
Version V2.4
Release Date 10/11/2004
Size 512 KB
Boot Devices Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
Capabilities Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
Supported Standards DMI, APM, ACPI, ESCD, PnP
Expansion Capabilities ISA, PCI, AGP, USB
[ System ]
System Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
Wake-Up Type Modem Ring
[ Motherboard ]
Motherboard Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
[ Processors / Intel(R) Pentium(R) 4 Processor ]
Processor Properties:
Manufacturer Intel
Version Intel(R) Pentium(R) 4 Processor
External Clock 200 MHz
Maximum Clock 4000 MHz
Current Clock 2800 MHz
Type Central Processor
Voltage 3.3 V, 2.9 V
Status Enabled
Socket Designation FC-478
Network adapters:
Direct Parallel 5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Quote from: Jack t.N. on 14-November-09, 08:00:05
Clear CMOS with your PSU unplugged from A/C power. Then load "Optimized Defaults" in BIOS and retest.
thanks jimi... jack
will try that and post later if it worked... ive never cleared cmos, this sort of thing is relatively new to me but thanks again

Installing Coldfusion 9 and Apache 2.2 on Windows Server 2008 R2 Standard

I'm having issues getting ColdFusion 9 working with Apache 2.2 on Windows Server 2008 R2 Standard.
The server is brand new and it's a fresh install of Apache and ColdFusion 9.
Having installed Apache, I tested the web server and it was working fine, so I proceeded to install ColdFusion 9. I attempted to restart the Apache server through the Apache Service monitor, only to get the error dialog box 'The requested operation has failed'.
On closer examination of the Windows error log, I saw the following error:
The Apache service named reported the following error: >>>
httpd.exe: Syntax error on line 488 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server: The Apache service named is not a valid Win32 application.
I updated the ColdFusion installation to 9.0.1 in case there was an issue with version 9.0 and Apache. Still no joy.
After a bit of research, I thought perhaps there was an issue with the mod_jrun22.so file (since when I commented out the reference to that file from the Apache config file, the Apache HTTP server started without any problem). I tried replacing the mod_jrun22.so with the 32 bit version (extracted from the wsconfig.jar file), but that made no difference either.
I have tried a number of things. I have run wsconfig and uninstalled all web server connectors and then re-created them.
I have to use Apache and IIS is not an option (I use rewrite rules extensively in an existing live installation and have many sites set up in a vhosts file), so please - no suggestions to use IIS instead.
The system requirements on http://www.adobe.com/sea/products/coldfusion/systemreqs/ state that Coldfusion 9 will work with Apache 2.2.17 and later on Windows 64 bit, so why am I having issues with a brand-new installation on a 'virgin' server?
Any help would be much appreciated. I have spent hours trawling the Web for solutions.

I missed an important detail in my opening post. My Coldfusion 9 version is 64 bit - not 32.
OK. Simple solution to this. I'll put it here for other peoples' reference.
To cut a long story short, after phoning Adobe support this morning I was told that you can't run a 64 bit version of ColdFusion with a 32 bit web server. In essence, the web server software and the ColdFusion server software must be the same - either 32 or 64 bit.
Apache is only officially released as a 32 bit version, but there is a 64 bit unofficial version available from http://www.blackdot.be/?inc=apache/binaries, so I downloaded that and installed it, based on the instructions at http://www.elxis.org/guides/developers-guides/64bit-apache-php-mysql-windows.html.
Once I'd installed the 64bit version of Apache, the installation of Coldfusion 9 64 bit went smoothly and all appears to be working just fine now (well, I can get to the ColdFusion Administrator page and I have successfully updated the server software to ColdFusion 9.0.1).
The fact that you can't mix different 'bit' versions of software in this way may be obvious, but it wasn't obvious to me. Having been an early adopter of a 64 bit version of Vista on my own PC, I never experienced these kind of problems before. Software installed itself into the corresponding locations on my PC without any problem and just worked. This is the first time I've run into this problem.
Unfortunately, there doesn't appear to be any information regarding this very important requirement on the system requirements pages, so I suggested to the support engineer that he may want to make the recommendation that the page is amended to clarify the situation: e.g.
IMPORTANT: 64 bit versions of ColdFusion require 64 bit versions of web server software to function. You can not mix 32 bit and 64 bit versions of web servers and ColdFusion server.
Hope this helps someone else out.

Error 0x800f024b installing x86 driver on Windows Server 2008

When attempting to install updated versions of my Lexmark Universal v2 PS3 x86 drivers on 2 of my Windows 2008 clustered print servers, I am receiving the following error screen: "Unable to install Lexmark Universal Universal v2 PS3,
Type 3 - User Mode, x86 driver. Operation could not be completed (error 0x800f024b)". I have 55 other Windows Server 2008 file and print servers that I have not had any issues doing this upgrade to. It only happens on my 2 clustered
print servers.

I believe the issue is not installing the driver in the spooler context but adding the driver to the driverstore. On a cluster the driver is added remotely (yes even on the active node) and the addition to the driverstore also travels the remote install
path. There was some issue we fixed for Lexmark due to some long string or something in this context but I can't find the information.
Are you running Server 2008 or 2008R2?
Alan Morris Windows Printing Team

Windows update KB2964444 broke Event Logging Service and SQL Agent Service on Windows Server 2008 R2

I got the following problem:
I discovered that on my Windows Server 2008R2 machine the event logging stopped working on 04/May/2014 at 03:15.
Also, SQL Agent Service won't run
The only change that day was security
update KB2964444 - Security
Update for Internet Explorer 11 for Windows Server 2008 R2for x64-based Systems, that was installed exactly 04/May/2014 at 03:00. Apparently, that's what broke my machine...
When I try to start Windows Event Log via net
start eventlog or via Services
panel, I get an error:
C:\Users\Administrator>net start eventlog
The Windows Event Log service is starting.
The Windows Event Log service could not be started.
A system error has occurred.
System error 2 has occurred.
The system cannot find the file specified.
I tried:
restarted the OS (virtual on the host's VMWare).
re-checked the settings in services menu -they are like in the link.
checked the identity in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\eventlog -
the identity is NT
AUTHORITY\LocalService
gave all Authenticated Users full access to C:\Windows\System32\winevt\Logs
ran fc /scannow - Windows Resource Protection did not find any integrity violations.
went to the file %windir%\logs\cbs\cbs.log -
all clean, [SR] Repairing 0 components
EDIT: Uninstalled the recent system updates and rebooted - didn't help
EDIT: Sysinternals Process Monitor results when running start service from services panel (procmon in elevated mode):
filters:
process name is svchost.exe : include
operation contains TCP : exclude
the events captured are:
21:50:33.8105780 svchost.exe 772 Thread Create SUCCESS Thread ID: 6088
21:50:33.8108848 svchost.exe 772 RegOpenKey HKLM SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
21:50:33.8109134 svchost.exe 772 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8109302 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services REPARSE Desired Access: Read
21:50:33.8109497 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services SUCCESS Desired Access: Read
21:50:33.8110051 svchost.exe 772 RegCloseKey HKLM SUCCESS
21:50:33.8110423 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8110705 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Desired Access: Read
21:50:33.8110923 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8111257 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS Desired Access: Read
21:50:33.8111547 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services SUCCESS
21:50:33.8111752 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS
21:50:33.8111901 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
21:50:33.8112148 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS
21:50:33.8116552 svchost.exe 772 Thread Exit SUCCESS Thread ID: 6088, User Time: 0.0000000, Kernel Time: 0.0000000
NOTE: previoulsy, for
21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
I also got NAME
NOT FOUND error ,so I created the new string value for the Parameters with
the name ServiceDll and
data %SystemRoot%\System32\wevtsvc.dll (copied
from the upper HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog key)
and this event now is
21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
I also checked for the presence of wevtsvc.dll in
the place and it's there.
Also, I tried to capture all events with path containing 'event' and
got following events firing every several seconds:
21:38:38.9185226 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Tag NAME NOT FOUND Length: 16
21:38:38.9185513 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\DependOnGroup NAME NOT FOUND Length: 268
21:38:38.9185938 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Group NAME NOT FOUND Length: 268
Also, I tried to capture all the events containing 'file',
excluding w3wp.exe,
chrome.exe, wmiprvse.exe, wmtoolsd.exe, System and it shows NO attempts to access any file ih the time I try to start
the event logger (if run from cmd - there are several hits by net executable,
not present if run from the panel).
What can be done?

Hi,
I don’t found the similar issue, if you have the IE 11 please try to update system automatic or install the MS14-029 update.
The related KB:
MS14-029: Security update for Internet Explorer 11 for systems that do not have update 2919355 (for Windows 8.1 or Windows Server 2012 R2) or update 2929437 (for Windows 7
SP1 or Windows Server 2008 R2 SP1) installed: May 13, 2014
http://support.microsoft.com/kb/2961851/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is there a restriction to install ODBO driver on Windows Server 2008 64bits

For SAP BusinessObjects Business Planning and Consolidation (BPC) version 7.5 Microsoft it is possible to connect with Xcelsius using an ODBO provider installed on the BPC server. In the installation Guide for BPC it is specified the need to add following key to the registry:
http://HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\MDA\ODBO
"SupportedProviders"="BPCMDX.4"
When installing on a Windows Enterprise Server 2003 64 bits I can find the registry three path to http://HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\MDA\ODBO . On a Windows Enterprise Server 2008 64 bits I cannot see the key path.
I copy below the paragraph regarding ODBO driver from BPC 7.5 Installation Guide:
Prerequisites
The following software is installed:
n SAP BusinessObjects Enterprise XI 3.1 SP02 (see Downloading and Installing the Central Management System
page 15).
n Microsoft Visual C+ 2005 Service Pack 1 Redistributable Package ATL Security Update+
on the Planning and Consolidation Web server and SAP BusinessObjects Enterprise
XI 3.1 SP02 server for Voyager or a Universe. You can download the installer from
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID
=766a6af7-ec73-40ff-b072-9112bab119c2 and choose vcredist_x86.exe.
Procedure
1. Download the Planning and Consolidation ODBO provider from the SAP Download area by
selecting Downloads Installations & Upgrades on the SAP Service Marketplace.
2. Navigate to <drive>:\odbo and run the client.exe file.
3. Add the Planning and Consolidation ODBO provider to the Data Driver by entering this registry
setting:
http://HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\MDA\ODBO
"SupportedProviders"="BPCMDX.4"

I found the answer, Xcelsius 2008 SP3 is not supported on Windows Server 2008.
Before trying to use more products please check the supported platforms for all products. For example you can see in Xcelsius documentation that SAP Business Objects Xcelsius 2008 SP3 is not supported on Windows Server 2008. This means that, even if BPC 7.5M supports Windows Server 2008, it is not possible to use both BPC 7.5M and Xcelsius 2008 SP3 on a Windows Server 2008.

How to Install AS 10g version 10.1.2.3 on Windows server 2008 64bit

Dear
Exparts, Hope you are fine.
Application Server: Standalone 10.1.2.3
OS: Windows Server 2008 64bit
Hardware: Intel Xeion ProcessorI know Oracle Application Server 10g & Standalone my version is 10.1.2.3 is not competible with Windows Server 2008 64bit.
But i need to install. Have any one has successfull experiances to do so ?
Please share and guide.
Waiting for your valuable responses.
ask2learn

Dear Marcus,
Thanks for your reply.
I tried Application Server Stand Alone and success.
So, i closed the thread.

ERROR Installing SAP NetWeaver PI 7.1 EHP 1 on Windows Server 2008 R2 x64

Hi!
I'm trying to install SAP NWPI 7.1 on a Windows Server 2008 R2 Standard, but in the step "Create Java User" stop the process when this creating the SAPJSF user, here's my system specifications:
OS: Windows Server 2008 R2 x64 Standard
RAM: 2 GB
Free Space: 100 GB
Virtual Memory: 16384 MB
Environment Variables:
CPIC_MAX_CONV = 200
JAVA_HOME = JDK 1.5 64 Bits
On running phase: Create Java Users, the installation stops when try to create the SAPJSF user, here's the output log:
ERROR 2010-06-16 12:18:28.968 [sixxcstepexecute.cpp:984]
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
INFO 2010-06-16 12:17:57.968
Output of C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/ADA/STD/AS/UserCheck.log.
WARNING 2010-06-16 12:18:28.593
Execution of the command "C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message"; finished with return code 8. Output:
INFO 2010-06-16 12:18:28.609
Removed file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ADA\STD\AS\dev_UserCheck.
ERROR 2010-06-16 12:18:28.640
CJS-30197 . DIAGNOSIS: For more details see output of log file:
ERROR 2010-06-16 12:18:28.968
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
WARNING 2010-06-16 12:18:29.125
Could not get property IDs of the JavaScript object.
ERROR 2010-06-16 12:18:29.125
FJS-00010 Could not get value for property
Best Regards,
David

Hi All,
As per the latest available sapinst and the kernel DVS's the system does not come up in the Java stack/Dual stack. Fails at the stage Starting the Java stack/SAPJSF creation stage. This is due to the kernel issue as the latest kernel is not bundled as a part of the DVD.
You are opt for 2 options
1. Stop the installation and the Bring down the system via MMC/cmd. backup the kernel and upgrade the Kernel with the latest Kernel available in the market place and then start the SAPINST. This would go ahead fine and the system would come up.
This is valid for the Dual stack and Java only system. In As ABAP the system get installed but the system would give dumps as soon as we log in so the Kernel upgrade needs to be done to proceed with the rest of the post steps.
2. Follow the snote: Note 1480785 - Creating a Modified Windows Kernel DVD for not getting bothered with these errors while installations.
Hope this helps -- Further more SAP would be coming out with the new DVD's/Support for Windows 2008 R2 pretty soon.
Thanks,
Lijin Xavier

Error starting forms and reports manageed servers on windows server 2008

Everithing was ok during install and configuration steps, put forms and reports, run application, 2 days later, servers stoped and it has been impossible to start them:
[2013-09-26T12:20:03.199-04:00] [AdminServer] [NOTIFICATION:28]
[] [oracle.sysman.core.pagemodel.logmgmt.msgs.LogMessagesPageModel] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 09f1d44aa5c550d0:-67c617bc:1415b0acd1e:-8000-00000000000000c3,0]
[APP: em] Falta la configuraciÃ³n de registro o no es vÃ¡lida para los destinos: /Farm_FormsReports/FormsReports/WLS_FORMS, /Farm_FormsReports/FormsReports/WLS_REPORTS
any suggestions?
weblogic 10.3.4
forms 11.1.1.4
windows server 2008 x64
JDK :java 6u30 x64

delete all, re-install all... ok

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

Unable to install Client Tools for Sybase ASE 15.7 on Windows Server 2012 64-Bit

Hello Folks,
I just downloaded the client tools package from https://support.sap.com/swdc --> Installation and Upgrades --> A-Z list --> SAP ADAPTIVE SERVER ENTERPRISE --> SYBASE ASE 15.7 --> Installation --> Microsoft Windows --> 51044415.zip
I'm trying to install the client tools for a newly provisioned Windows 2012 64-Bit machine. After unzipping the folder and running autorun, the installation does not proceed. When I go to pcclient64 and run either setup.exe or setupConsole.exe, I get the error "This Application has Unexpectedly Quit, Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)". I stumbled across various posts on the forum, and it appears that the installer is not certified for Windows Server 2012. I tried using the compatibility mode for Windows 7, and it proceeds further and launches the SAP GUI; however, it closes afterwards.
Any suggestions would be greatly appreciated. Thanks in advance.

Hi,
51044415 is a PC-Client 15.7 refresh.
You are using a version that was not certified with Windows 2012. Get the most current version PC-Client 15.7 SP130 or SDK 15.7 SP130 or SP132.
If your looking for PC-Client5.7 SP130 look for EBF23439
We didn't get certified with Windows 2012 until SDK 15.7 ESD#6 even with that I reported a few minor issues.
You need the following on the machine before the installation.
Microsoft Visual C++ 2010 Redistributable Package (x64)
Microsoft Visual C++ 2005 Redistributable Package (x86) (or dsedit and ocscfg will not work)
Microsoft Visual C++ 2005 Redistributable Package (x64) (or dsedit and ocscfg will not work)
Thanks,
Dawn Kim

Installing ODBC Driver for Windows Server 2008 64 bit

I have a new Windows 2008 server 64 bit in which the Oracle ODBC is missing. We are on Oracle 10.2. It looks like I need to install the developer suite first in order to get tnsnames and sql plus, but I can find only the 32 bit version. Could someone point me in the direction of what exactly I need to install in order to get sql plus working and also to install the Oracle ODBC on this server?
Thank You

I need to install the developer suite first in order to get tnsnames and sql plusThat's wrong, you need to install the correct client:
http://www.oracle.com/technetwork/database/10203vista-087538.html
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
Note: If you have Windows 2008 R2, you need patchset 10.2.0.5, which is only available from MOS/metalink.

Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

Similar Messages

Maybe you are looking for