Unable to install Lightroom 5 on Win 7: error (0xc000007b)

tried installing Lightroom 5 on windows7 system  It wont open  shows error (0xc000007b) message

http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html

Similar Messages

  • Unable to install Lightroom 4 on imac 10.6.8

    I am unable to install Lightroom 4 from the original disc on to my imac 10.6.8.  I successfully installed Adobe CS6 on to the imac without any difficulty.  While attempting to install Lightroom 4 I receive a screen that says "Installation Failure.  Unknown error.  Contact software adminstrator."  The imac has an intel core 2 duo processor, 2 gb ram.  The system requirements are the same as CS6 which installed without problems.
    Any suggestions?
    Thanks for any help!

    Not sure... It states that 64bit support is required, which would preclude older iMacs and MacBooks and you seem to be using exactly one of those... I'm afraid this will not work.
    Mylenium

  • I am unable to install the creative cloud update - error 43 comes up at around 77%

    I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

    WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
    Mylenium

  • [Consolidation-Locked] I need to install lightroom on win xp.  Is it possible?

    I need to install lightroom on Win xp.  Is it possible?
    Message title was edited by: Brett N

    Unfortunately not.
    Win Vista SP2 and Win 7 SP1+ only.
    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html

  • I tried updating my ipad over a wireless, after downloading the update i was unable to install with a message an error occurred installing ios 7.0.3

    i tried updating my ipad over a wireless, after downloading the update i was unable to install with a message an error occurred installing ios 7.0.3

    Hello mom_5_01,
    The following article should be quite beneficial in your endeavor to update your iPad.
    iPad: Unable to update or restore
    http://support.apple.com/kb/HT4097
    You may encounter the following symptoms while updating or restoring your iPad:
    iPad continually restarts but never displays the Home screen.
    An update or restore did not complete and the iPad is no longer recognized in iTunes.
    iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
    If this occurs, you can place iPad into recovery mode and attempt to restore again. If iTunes displayed an alert with an error code, see this article before attempting the steps outlined here.
    Cheers,
    Allen

  • Unable to install CS6-exit code 15 error

    Unable to install CS6  getting the following error;
    Exit Code: 15
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 1 warning(s)
    ERROR: ASU has quit unexpectedly.
    WARNING: User opted to Cancel the install
    Runnin MacBook Pro
    13-inch Early 2011
    2.3 Ghz Intel Core i5
    4 GB 1333 Mhz DDR3
    Intel HD Graphics 3000 384 mm
    Mac Lion 10.7.3
    Any work arounds?

    Hi,
    We are tracking this issue at:
    http://forums.adobe.com/thread/978912?tstart=30
    Regards,
    Ashutosh

  • I am having trouble installing Lightroom 5 with this error message: Payload: AdobeLightroom5CCMPkg-m

    I am having trouble installing lightroom 5 with this error message:
    Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
    what should I do? Billmeb

    Hi BillMeb,
    Please refer the knowledge base article: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html.
    Regards,
    Romit Sinha

  • Unable to install photoshop cs4 upgrade. getting error message

    unable to install photoshop cs4 upgrade. getting error message

    but the error message says that Apple Power PC apps no longer supported.
    You still need to contact the manufacturer.  You need to determine from them if they have drivers that support the OS that is currently installed on your comp or read the following KB Articles: 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer 
    http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system 
    A scanner driver you may wish to consider:  VueScan Scanner Software 

  • Unable to install lightroom 3.6 error code 2753

    Had issues with my computer today (windows 7 64 bit) finally was able to get a restore point that would allow the machine to access windows and all the programs (including Photoshop CS5) were functional except lightroom 3.6. I was not able to have the windows un-installer remove lightroom so I had to go and do it manually. I downloaded another copy from Adobe. When I try to install I get the error code 2753. The file Lightroom.exe is not marked for installation. I checked the FAQ's and there was only one reference to that code but it refered to lightroom 2.0 software installation. I re-installed lightroom 2.6 with no problems and I tried installing the 3.6 software after installing the 2.6 version. I had no luck still receive the 2753 error code.  When I initially installed the 3.6 version on 12/4 there were not issues and the software worked with no problems. Any ideas / suggestions? Thank you.

    Hello Jeff, Thanks for the reply. What had occured was when I was working inside of Lightroom one of those balloon messages popped up making note of a hardware driver not working or missing, I really did not pay attention to be honest I thought it may have had something to do with the download of files off of the compact flash card. After downloading the files into lightroom I turned off the machine. Later on when I came back to work on the files the machine would not boot up into windows 7 instead a sort of chkdsk utility initiated, after it finished checking the disk I was given the option of going to a previous restore point, the first time it did not work. On the second try with a different restore point selected I was able to bring up windows. Everything was working except for the lightroom software. After running Registry Reviver and also optimizing the registry I still was unable to get lightroom to work.
    I decided to download another copy and re-install. Well the first trouble encountered was not being able to un-install the software from the control panel utility so I tried installing the software without the old software being removed, that is the first time I received the 2753 error code. I checked adobe.com FAQ page and the only mention about this code was in reference to the 2.X version. I tried the procedures there anyway. Still no success with the error code 2753 still coming up. I then decided to remove the software manually from the computer (only in windows, did not go through DOS or to regedit). I again ran Registry Reviver software  and tried installing the software again with no success still.
    Finally I decided to google the error code 2753 and review what was actually happening. Part of the instructions to clear the code required me to download some software that microsoft created (msicuu2) that would force the removal of the lightroom software from my machine (it was still showing up in the control panel un-install eventhough I removed it from the program file in windows). I again ran Registry Reviver and Optimized the registry, re-booted the machine gave it another try and this time I had success.
    I am happy to report that Lightroom is working without any problems. I cannot say with any certainty what caused the problem initially for all I know it could be just a case of SH's syndrome.
    I took note in your reply about the stability issue, I will pay more attention for now to see if there is a re-occurrence of this or a similar problem and then address it at that time. I would like to mention that I did not loose any photo files or have any files corrupted due to this problem........ so I am thinking more a windows problem as you alluded to in your reply than it being a Lightroom problem.

  • Adobe Lightroom 7.2 64 bit installed but will not open error 0xc000007b

    After 3 days of tryng to download and run the above I was finally able to get it on my machine today.  During the past 2 days I would get Lightroom downloaded but it would not install
    as per the above error.  Today I copied the download URL into Safari and was able to download install and open that way only.  Now after closing Lightroom when I click on the desktop
    icon I once more get the error message shown in the subject line above. I am running ELEMENTS 10,    PHOTOSHOP Cs6 64 BIT,     PEREFECT FFECTS 3,       PHOTOMATIX PRO 4.2.4     &
    TOPAZ MHT WITHOUT ANY PROBLEMS.
    MY SYSTEM IS WINDOWS 7 HOME PREMIUM 64 BIT WITH 8.00GB RAM WITH INTEL 540 @ 3.07 GHz
    THIS IS TO MUCH MONEY TO JUST THROW AWAY ON A DEAD PROGRAM.

    Yeah well, that was a typo on my part, it's 4.2 you have to keep in mind
    that it was about 2 or 3 when I posted that.
    BTW, corrected problem, working fine now.
    JOHN JUBINVILLE
    17505 Jefferson Hwy  #2203
    Baton Rouge, La.  70817
    Cell:  281-782-3988
    Home:  225-302-7509
    [email protected]
    This email and any files transmitted with it are confidential and intended
    solely for the use of the individual or entity to whom they are addressed.
    If you have received this email in error please notify the sender. This
    footnote also confirms that this email message has been swept for the
    presence of computer viruses.

  • Unable to install itunes 7 due to error "Bonjour service failed to start, verify you have sufficient privileges" mcafee is not blocking it, please help anyone?

    I am unable to instal itunes (greater than version 7) as it gives me the error,"Bonjour service failed to start, verify you have sufficient privileges" , i have checked on apple support and the only help for this error says that mcafee antivirus is blocking the services however i have never had mcafee installed on my pc. Anyone any other ideas as to what could be wrong?

    Hi doywks,
    The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device.  The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system.  It's possible that you are not logged in as the administrator for your Windows PC.  Or, you may have antivirus software stopping the Apple Mobile Device from running.  
    If you are having issues updating iTunes on your PC, follow the steps in the article below.
    If you can't install or update iTunes for Windows - Apple Support
    https://support.apple.com/en-us/HT201668
    How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
    https://support.apple.com/en-us/HT203188
    I hope this information helps ....
    - Judy

  • HT1926 I a m unable to install and run the lates - Error 7()Windows error 1114)t version of iTunes. I keep getting a rruntime error - R6034 and a windows error

    I am unable to install and run  the latest version ot iTunes. Getting "Runtime error - R6034. An application has made an attempt to load the C runtime library incorrectly"
    Error 7(Windows error 1114)

    Try and not duplicate these issues and do a search next time.
    Now load https://discussions.apple.com/thread/5826672?start=0&tstart=0
    and that Topic has the correct information to fix this problem.
    Regards
    pcbugfixer

  • Unable to install iTunes, I get an error saying it is unable to create the directory C:\Program Files (x86)\iTunes\iTunes.Resources\da.lproj\iPodWelcomeOffline.nib

    Unable to install iTunes, I get the following error:

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Unable to install new iOS 6 software error 3004

    I am unable to install new iOS 6 software on my ipod 4 touch getting unknown error 3004

    mardanlou_ali wrote:
    unable to install update iOS 6.1.3
    Check that yours is not an iPad 1
    Identify iPad Models...
    http://support.apple.com/kb/HT5452
    If it is ... iOS 5.1.1 is as far as it will go.

  • Itunes 11 unable to install due to administrator privledges error

    Hi.
    I attempted to update form Itunes 10 to Itunes 11 via the apple software update application but it failes to install due to an error.
    So i tried to download Itunes 11 manually from the website and when I do it this way I get an error saying unable to install because I dont have administrator privledges. So I have to cancel the installation and back out.
    What do I need to do resolve this issue?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

Maybe you are looking for

  • Oracle App Server 10.1.3 - IBM MQ 6.0 Msg Redelivery Issue

    Hi All, I have an application which sends message to the Queue configured in MQ. I have an underlying MDB to receive the messages from the MQ. In some of the business scenario i am getting an error during processing of the message and MDB doing a rol

  • Best practice for SWC's in shared projects?

    I'm creating a number of Flex components in Flash for a project where the development responsibilities will be shared between myself and another developer via SVN. My question is regarding linking the SWC's in the Flex Build Path. The .swc files are

  • Possible bug using go tag with redirection under SSL?

    I've been testing an application under SSL and have noticed that some links "pop-out of SSL". Upon further inspection I noticed the links were using <go> tags with redirect set to true. Does anyone know where <go> gets the URL it uses? I'm wondering

  • Downloading CC Trial error

    Hi there, I would like help in regards to downloading Photoshop CC trial, I have tried numerous times on a brand new Mac desk top, and have found this error - We are currently experiencing some issues, please try again later. If the problem persists,

  • Apple TV Home Sharing being completely irrational

    Using iTunes 10.4.1 Using Apple TV 4.3 Using Mac OS X 10.6.8 Home sharing is turned on in iTunes and using the same account as Apple TV I can send music to Apple TV - the album artwork even comes up I can browse the internet and movies tabs on Apple