Unable to install LV Runtime Engine 7.1.1 with LabVIEW Professional 8.5.1

I installed LabVIEW Professional Sys. for Windows (XP) 8.5 and then the 8.5.1 update. Somewhere in the original installation, LV Run-time Engine 7.1 was installed. But I need LV RTE 7.1.1. So I attempted to install RTE 7.1.1. Problem: The LV RTE installer aborts with the following message:
"Installation aborted. Newer version already installed."
Why do I need 7.1.1? I must run some commercial LV executables that were compiled with LV 7.1.1 and will not run under 7.1.

Well, I have to correct myself. MAX indicated that LV RTE 7.1 (not 7.1.1) was installed. My complied LV app indicated that 7.1.1 was not installed. I checked Windows Add New Programs and selected "National Instruments Software" I found that LV RTE 7.1.1 was, in fact, installed. So I selected LabVIEW Runtime Engine 7.1.1 and clicked Repair. After rebooting, My app works correctly. Again, MAX incorrectly displays LV RTE 7.1 (not 7.1.1). My app works, so I don't care.

Similar Messages

Cannot Install LV Runtime Engine 7.1

HI,
Some of our users are having unusual installatiion problems while
installing the LV runtime Engine 7.1.1 on win2k. Our users have
installed another application recently and in that process the LV
runtime engine was removed from their computer. So, they tried to
install the runtime engine(downloaded it from NI website) again but couldn't becuase they keep getting
the message that they are not logged in as administrator. We logged in
as admnistrator and tried installing the runtime engine again,
but the error keeps occuring and is not allowing us to install. I
searched the NI discussion forums and the Knowledge base to find
answers but did not see any that match our problem. From some of the
posts I suspect it has got something to do with Microsoft hotfixes and
windows upgrades etc.
If anyone else had seen this kind of behavior and has found a fix,
please share it with us. Any help will be greatly appreciated.
Thanks Ahead
Deepak K

Hello!
This is an unusual problem. I would first go through the add/remove
programs through control panel. Loate the "National Instruments
Software" item and select "change". See if any LabVIEW
components are there and slect to remove them. This will completely remove the
LabVIEW components. Then attempt a reinstall of the runtime engine.
If this still causes problems, you may have deleted the old LabVIEW runtime
engine in an unusual way which is interfering with later installs. If this
is the case, there are some other methods that we might be able to use to
uninstall fragments of NI software. Removing the software does not fix
the problem post back and let us know!
-thanks-
Travis M
LabVIEW R&D
National Instruments

How do I build an executable w/o installing the runtime engine in the OS?

Hello everyone
I have developped an application with LabView 8.01 and build an executable for a customer, this works great, if I have administrator rights. But my customer don't have full administrator rights and they are not able to install the software (Runtime Engine). In LabView 6.0.1, to solve this problem we added the lvrt.dll and some support files directly to the application builder as support files and it worked without to install the runtime engine in the operating system.
How can this be done in LabView 8.0.1 and which files are needed?
I am thankfull for any advice.

hi,
you always need admin rights to install software.
I think it's not possible in labVIEW 8.01 to install the runtime without admin rights.
The costumer only has to the runtime one time, so he should try to contact his system administrator.
I've found no workaround for it.
Best regards.
Christoph Strasser
AE/NIG

Runtime engine 8.6.1 on Labview 11

Hello,
I have upgraded labview 10 to Lv 11. A program that used to work on Lv 10 is giving problems now. It asks for runtime engine 8.6 ( usually gets stucked preparing the installation ). Once i cancel this process, it loads all the vi's, and it seems to work, but I can't be sure until all the devices are connected, and it can't be done until september. My question is, do i really need to install runtime engine 8.6 to make it work properly, or it can work without it?
And if I downgrade to Labview 10, will i solve this issue??
Thanks in advance!!

This is actually strange behavior because the runtime engine 8.6.1, if it is installed on the computer, should be accesible both from LV2011 and from LV2010.
What do you mean by "downgrade to LabVIEW 2010? You may have multiple version of LabVIEW on the same computer. Did you uninstall LV2010 first? If you did, then it may happened that you uninstalled the runtime engine 8.6 at the same time.
Do you really need or don't need the engine depends of your application. In any case, it should not be a problem to download the runtime engine from ni.com and install it. http://joule.ni.com/nidu/cds/view/p/id/1244/lang/en
Sergey Kolbunov
CLA, CTD

I am unable to install OS X 10.9.2 along with iTunes 11.1.5

I have been unable to install the OS X 10.9.2 along with iTunes 11.1.5

Try running the combo update.
10.9.2
Try downloading iTunes from here.
iTunes 11.1.5

How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available). Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
If I have to downgrade to LabView 2012, where can I get the installation for this?

Unable to install Oracle 8i Personal Edition in Windows98 with Pentium4

I am getting error "Performed illegal Operation" when ever I
unzip and install Oracle 8i PE 8.1.7 for windows98. Error is
JREW caused an invalid page fault in module JAVAI.DLL,
suggestions was install new JRE Version. I have tried to format
hard drive (twice) thinking some software incompatibility, no
go. remove devices, no go. After further analysis it seems there
is issue installing 8i databse Personal Ed. in Pentium 4
processor with an Intel motherboard latest Bios. I have
downloaded and installed JRE Version 1.1.8_008, still no go.
What am i missing? Please advice or suggestion. Thank you. Email
me- [email protected]

I am unable to install 8i personal edition Release 3 onto my W2K machine. I download the zip file and unzip it into (c:/OracleInstall) a folder I have created on my c:/ drive. When i click on the setup.exe file it opens up. When I click on the install button the GUI disappers and nothing occurs. I have attempted to burn it onto a CD_Rom and install through the control panel and the same occurs.
I am not sure what is causing this problem. Is there any why I could request the software in a CD as opposed to a zip file? What could be causing this problem? Is the machine a P4? there is a known problem
I don't know about his machine, but mine is a P4. Where do I find this information about this problem? And is there a fix? I need to install the NET8 Assistant.

How to install LV runtime engine and run .vi's in linux

I am attemtpting to load run time engine and run a .vi on Linux system.
Here is what I have done so far.
1. I don't have rpm on my system (gentoo) so I used the app on the install cd called INSTALL.norpm to install
labview70-rte-7.0.1.i386.rpm. It looks like it worked, there are a lot of files copied to /usr/local. A couple of .so files and a directory called Labview-7.0 (12M of files).
2. Made a test vi on other linux box that has full development system installed (also gentoo but i have rpm on this system).
    Do I need this application builder i keep hearing about to make an .exe or can I run vi's with this run time engine?
    What is the syntax to run a vi in linux? ./test.vi   ????
    Is application builder a seperate program that I must purchase?
When I attemp to run a vi I get garbage printing to the console, not unlike when you cat a binary file.
Any help would be appreciated. Is there instructions somewhare??? A manual perhaps that explains rte install and operation.
D.A.M.

You need the application builder to create an exe. The rte by itself will not run a VI. The exe does require the rte. It is possible to create a "loader" program that you can use to run separate VIs but the loader program must be created with the app builder. The app builder is a separate add-on or if you buy the professional version of LabVIEW, it comes included with that.

Unable to install Intel Management Engine Interface

http://support.toshiba.com/support/viewContentDetail?contentId=4007230 When I try to install it, a box pops up and says ERROR Do Not Support This Platform. I have a Toshiba Satellite C855-S5234

I also have the same issue. I have a TOSHIBA Satellite C855-S5206 running Win 7 64-bit.I ignored the update months ago in TOSHIBA Service Station after I tried to install it and it gave a popup "ERROR: Do not support this platform." But today TOSHIBA Service Station asked to install it again. I tried but same popup error.I went to the support page for my laptop and it lists this as a required update (same update as listed on TOSHIBA Service Station):Intel Management Engine Interface Posted Date: 2015-03-20 | Version: V9.5.24.1790 | Size: 70.13M I downloaded and tried to install the exe file and it still gives a popup "ERROR: Do not support this platform."The update is for the series 7 chipset but I'm also running the series 3. Has anyone resolved this??

Unable to install iTunes; Runtime error 6034

These messages appear upon trying to open the re-instalation of iTunes (Previous versions removed through Windos "Uninstall a Program"): Itunes does not open.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100079)

Unable to install update version 1.6.0.393 with error code 3 (Administrator privileges)

I am unable to update Creative Cloud to version 1.6.0.393. I am running Windows 7 Professional SP1 and have tried installing in administrator profile.
The message returned when attempting to start the update is:
Administrator privileges are required to continue with the installation.(Error code: 3)

Didn't work for me....I have this same problem.
Tried all this stuff too:
"Installing Update" Error, Administrator Privileges are required to continue with the installation (Error Code 3)
I'm on a network as an admin, have tried opening it as an admin, set "always open as admin"....everything.
MAD

I tried to update to 3.6.14 but it was unable to install the update & tried a complete update with "patch apply failed" as a result. it is not listed in the 'unistall program" area of my Windows Vista. how do I uninstall and reinstall Firefox?

I have no other issues withmy computer as I have used PC's for years and am quite familar with their operation. teh questions pretty much says it. After attempting to updat firefox is totally unreliable shuttign down eityher after a few seconds or a few minutes never longer. I curently have version 3.6.13 and the update for 3.6.14 will not install due to a " patch apply failure" as mentioned. I have Windows vista currently and use firefox for the online assignments I do with school, least amount of compactablity issues.

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Unable to Install iTunes 64 bit on Lenovo X1 with Windows 8.1

I get the error message in the screenshot attached when I try to install iTunes on my Lenovo (W 8.1). I havs done all the uninstalls (iTunes and all Apple and Bonjour programs and folders) and attempted reinstalls, and ever time I get this error message that Apple Mobile Device fails to start. I have installed Windows Media Pro for Windows 8, as aome have suggested but this makes no difference. I have also set permissions in system so Administrators hav full control, and I have even tried to install as Administrator. Appreciate any advice appreciated.

Also, if I ignore the first error message and proceed with the installation, I get this second error, that Apple Application Support cannot be found, and the iTunes boot up fails. Again, any assistance appreciated.

Unable to install solaris 9 on via pt800 mainboard with Celeron 2.13 Ghz pr

Hi everybody
This is sharavan .I have a desktop with VIA PT800 Mainboard ,512 MB DDR SDRAM,Celeron 2.13 Ghz processor ,80 GB ATA HDD installed with Windows 2000 on one partition occupieng 20 GB and Red hat linux ES3 on another partition of 30 GB. I want to install SOLARIS 9 (X86 Version) on remaining unpartitioned free space 30GB. The installation is being sruckedup at the stage "Boot Solaris kernel from any of the identified devices 1)CDROM 2)HARD DISK ,I have choosen CDROM But the System is being hanging up there,no further action" I have restarted the system manually and tried many times without success. How to complete the installation ,Please suuggest me ,help me.........
Thanking u
[email protected]

Hello!
There is one simple method also..
Instead of Installation disk of Solaris, insert the Software 1/2 Disk, and try to follow the actuall Suninstall method of installing Solaris. Here you will get the option that how to utilize the free space.
I myself have installed more 5 OS on a single Hard disk :) this way. Try this method

Unable to install 11g R2 Database(desktop class) on Windows 7 professional

Hello,
I have downloaded Oracle 11g Release 2 and try to install on Windows 7 Professional (x64) and it is giving the following error .
Appreciate if any someone can resolve.
Expected Value
: n/a
Actual Value
: n/a
List of errors:
PRVF-7531 : Physical memory check cannot be performed on node "Tanweer-PC" - Cause: Could not perform check of physical memory on the node indicated. - Action: Ensure ability to access the node specified and view memory information.
Edited by: Tanweer on 20 Mar, 2011 8:31 AM

Here output from the install log files:-
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME Tanweer-PC
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_client_OraMTSPortNumber 49156
oracle_install_db_ASMSNMPUserPassword Protected value, not to be logged
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_CustomInstall false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EMCentralAgentSelected
oracle_install_db_EMEmailAddress
oracle_install_db_EMSMTPServer
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_ReceiveEmailNotification false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_RecoveryBackUpPassword Protected value, not to be logged
oracle_install_db_RecoveryBackUpUsername
oracle_install_db_SID
oracle_install_db_SecureConfigDisabled false
oracle_install_db_SetOracleBase false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords Protected value, not to be logged
oracle_install_db_SuperAdminSamePasswdForAll Protected value, not to be logged
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseDBControl true
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
INFO: Launching Oracle Database 11g Release 2 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@5f159e0c
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>

Unable to install LV Runtime Engine 7.1.1 with LabVIEW Professional 8.5.1

Similar Messages

Maybe you are looking for