Unable to install my printer on my Mac os x 10.4.11.

why does my printer configuration do not response

Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Reboot.

Similar Messages

  • How do I install custom printer profiles in Mac os mountain lion. I can.t fine the icc profiles directory (if that's what it is).

    How do I install custom printer profiles in Mac os mountain lion. I can't find the icc profiles directory (if that's what it is).

    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder. You'll need to do it again after each system update that's applied.
    OT

  • I am unable to install Adobe Illustrator to my MAC. What could be wrong?

    I am unable to install Adobe Illustrator to my MAC. Not sure why it's not downloading.

    Please read, and reply back here with information https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Unable to install downloaded driver on my Mac OS X 10.6; therefore printer useless!

    I downloaded the HP Deskjet Ink Advantage 2645 driver from the site: 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?
    cc=gr&dlc=en&lc=en&os=4082&product=5357280&softwareitem=mp-120070-4&sw_lang=& 
    but, when attempting to install the downloaded driver, I got the message: 
    HP Deskjet 2640 series cannot be installed on this computer. 
    Therefore, the newly-bought printer 2645 cannot be used on my Mac. Thank you HP! 
    END
    This question was solved.
    View Solution.

    Hi PanosKal,
    I understand you have a Deskjet Ink Advantage 2645 that you're trying to install on a 10.6 Mac without much luck thus far. I'm sorry to hear this, but I will definitely do my best to assist you.
    I believe it may have just been an issue with the download. I downloaded the software package on our 10.6 Mac here and I was able to run the installation, so the software itself is working.
    I will direct you right to the download page for the Deskjet Ink Advantage 2645, and please try downloading and installing the software once more. If it still doesn't work, could you please take a screen shot of what happens and then post it here for me? Thank you!
    Hope this helps, have a great weekend!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Trouble installing Canon printer on my Mac

    I am having trouble installing the Canon C3220 printer on my Mac powerbook 15-inch 1.3Ghz. It has 10.3.9 on it. The Canon printer sits on my work network. I have installed the lastest Mac printer driver for the C3220. When I got to set up the printer. I choose the Kind of printer, then I get the following message: unable to communicate with device. I then try to set the printer up manually, but then nothing prints to the printer. Other mac users on my network can print to the printer, and they have the same driver installed on their machine. Is there something I am doing incorrect? I tried contacting our Canon suppliers, but they do not know how to use Mac machines. I have another network Canon printer installed on my machine whicgh I can print to fine. So not too sure if it is something wrong with my machine or with how the printer is set up.

    saying something about PowerPC applications and i have no idea what that is.
    Basically, in layman terms, they are applications that can only run on non-Intel computers.  Support for PowerPC applications I believe stopped with the Lion os system.  Which one do you have?  Your system profile is lacking this information.
    Am i going to have to buy a new printer??
    More than likely if your printer does meet the system requirements.  You will need to call HP tech support or visit the HP website, look for your model printer & read its system requirements.  If your printer does meet your system requirements, its possible you all you need to do is update the printers drivers.

  • Unable to install Acrobat XI Pro for Mac

    Error message is "unable to install as operating system runs on a case sensitive volume"
    I have Mac Pro, OS 10.8
    This is new. Never had an issue with any other software installation.
    Help?
    Thanks!

    Moved to Acrobat Installation & Update Issues

  • Unable to install adobe flash on my Mac

    unable to install adobe flash on my MAC

    Paul, try this. Ir worked for me.
    Essentially the online installer, which you're using downloads and installs Flash Player silently in the background.  For some reason, the download is failing.  Please try the offline installer posted at the bottom of the Installation problems | Flash Player | Mac page in the 'Still having problems' section.

  • Unable to install CS6 master collection for mac book pro(late 2011)

    Recently, I have successfully downloaded Adobe creative suite CS6 master collection for MAC.
    However, I am unable to install it. After opening the installer nothing happens, it does not proceed further. I have tried copying the contents from MasterCollection_CS6_LS16.dmg to another folder and then open the install.app, still no progress.
    Please advice since I really need to install this.
    Screenshot below:

    Hey Vikrant thanks for the response.
    The situation is like this, I downloaded the image on my desktop pc(which is windows) and then compress & split the image using a winrar. I then transferred the files to my mac book pro and extracted the image there. Unfortunately, there was a bug in the unarchiver software that I was using on mac to extract the image.
    This bug was rectified today in a update given out by the dev.
    Now, I can install CS6 without any issues. Thanks for the repsonse once again.

  • Unable to install network printer

    hello:
    i just got a network drive (Western Digital Netcenter) that has a print server as well. on my iBook (OS X 10.2.8) i can see the files on the network drive, but i cannot seem to add my printer (epson stylus photo r300). i can print fine from my PC from this networked printer. the instructions from WD say to click "Windows Printing" after clicking to add a printer, but this option is not available. any ideas?? thanks

    no dice. sorry it's been a while for my response, but i've been out of town with the holiday. anyway, tried Wd-Netcenter as the share name as well as the printer name. WD says that the printer name should be the name of the model up to 13 characters, but printers with a name longer than 13 characters won't work with Mac and their network drive. no matter what i do i can install the printer, but when i try to print a document it times out with an error message saying "Cannot connect via Samba, will try again in x seconds" or something to that effect. i'm going to try updating the firmware on the network drive and try again but i'm not holding my breath given the level of support i've gotten from WD. thanks for all your help will update if i get things working....

  • LOST MY SOFTWARE FOR INSTALLATION HP PHOTOSMART PLUS, HOW CAN I INSTALL THE PRINTER IN ANOTHER MAC?

    HELLO
    I ALLREADY HAVE A HP PHOTOSMART PLUS PRINTER, BUT I LOST MY SOFTWARE INSTALLATION CD. I JUST ACCUIRED ANOTHER MAC, AND WOULD LIKE TO INSTALL THE PRINTER IN THIS COMPUTER.
    WHAT CAN I DO TO INSTALL IT?
    KIND REGARDS,
    JAIME
    This question was solved.
    View Solution.

    Hi Jaime,
    What you can do is go to the Support and Drivers Area of the Hp website by following the link http://www8.hp.com/us/en/support-drivers.html
    - just type in the Version of of the Photosmart you have, and then follow that by the Version of the MAC OS that you are running
    - you will want to do this from the computer you are wanting to install the printer on.
    simply download the Driver and Install and that Should Assist you in getting that printer set up on that computer as if it was coming from the Disk itself
    I am an HP employee.
    __ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

  • Is the Dell 3115CN compatible with a Macbook Pro running Mountain Lion? If so, how can I install the drivers and install the printer on my mac?

    I hace a Macbook Pro running Mountain Lion OS.... I need to print from time to time but don't have a new printer to go with my new macbook. Would a 3115CN work with it or no? If so, how can I set it up? Setting up a printer on a mac is a bit different from doing so on a windows machine and I am new to the macworld.
    All help would be greatly appreciated.

    Yes. I'm running this printer from 10.6 through 10.9 and it's worked fine with all versions. Dell released updated drivers a while ago that make it much easier to administer this printer.

  • Unable to install windows 8 on the mac

    how do I install windows 8 on the Mac I tried but cannot get past windows set up . Where do you want to install windows? I have highlighted Drive 0 Partion 4 and it comes up with this We couldn't creat a new Partion or locate an existing one.

    There are two different methods of installation, EFI and MBR, you are running a method which is combination of both. Either your MBR is incorrect or BCA failed to create one. EFI method requires a partition which is Free Space and the disk is GPT-only while MBR method expects to the disk to be partitioned already. If you see 'disk0 partition 4', it is the MBR method, and BCA could have failed.
    Please post the output of the following Terminal command. You will be prompted for your password, and it will not be echoed back to you. "sudo" will also warn you about improper and potential data loss due to such 'abuse'.
    sudo fdisk /dev/disk0
    sudo gpt -vv -r show /dev/disk0
    Please also see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2

  • Unable to install purchased apps on other Mac devices

    Did the App store policy recently change? When I purchase software on App store, I've always been able to install the software on my multiple Mac devices tied to my Apple ID. I purchased some software this morning on my MacBook Air, but now I can't install this software on my Mac desktop system. It says it's installed already, which is only true for the laptop.
    Is one still supposed to be able to install Mac software on multiple Mac computers using the same user ID?....

    Hmm...I'll check that out. But this is strange. I've only installed the apps so far on a completely separate computer -- my MacBook Air. My Mac mini upstairs doesn't have these apps installed already. Strange...I'll do some digging as I'm sure I'll get this figured out somehow when I have more time to research further.

  • Getting msg: blocked plug-ins. unable to install adobe flash playr. Mac OSX 10.6.8 safari

    getting message:  plug-ins blocked. unable to install adobe flash player.

    getting message:  plug-ins blocked. unable to install adobe flash player.

  • Unable to install new printer

    I have tried everything.  is there an 800 number to call?

    Hi John, Welcome to the HP Community Forum. I am sorry installing the printer turned into Rocket Science. --------------------------------------------------------------------------------------- The answer is "It depends on where you live". If you are located in the US / Canada, you do have to first go through the Web form bits -- it only takes a couple of minutes -- and you leave your contact information.  Not horrible, just different. If you are in the USA / Canada, fill in the Web form and leave contact information:Contact HP – USA - Assistance HP Tech support/ Customer Service – Some English Speaking CountriesIncluding UK and Europe HP Connected, ePrint, Instant Ink, and PrintablesIn USA or Canada, call Cloud Services: 1-855-785-2777  =====================================================================General Reference, Help, and Tips:Install Full Feature Software – Printer When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.
     

Maybe you are looking for

  • How do I change the itunes account on my computer?

    How do I change the itunes account on my computer?  I let my ex keep my Apple ID as he had purchased a large amount of music, so he uses it on his Iphone and computer, and I started a new account on my Iphone, and I'd like to use that one on my compu

  • GetAVDoc() is not working with Acrobat 9

    Hi, I am using GetAVDoc() with acrobat 9 to get the current open PDf, but this method is not return the current open pdf object, by which i read the PDF data.But this is working fine with Acrobat 8. Do needfull !!!!!!!!!!!

  • Can I set clip durations in iMovie 10.0.7 for Yosemite?

    In earlier versions of iMovie I was able to go to preferences and display the clip durations as described in this link below. I could also see the approximate position of the entire video while it is playing. iMovie '11: Display the precise duration

  • Wacom Tablets

    Hi Is anyone out there willing to advise on which Wacom tablet (or other brand)to use in conjunction with pse3 Thanks Neil

  • Error in Funtion module SD_SALESDOCUMENT_CREATE

    I am getting error ' specify either address number or address handle'  while executing function module SD_SALESDOCUMENT_CREATE. Is this because of missing Customer number (PARTN NUMB)? Please confirm. Thanks.