Unable to install network Scanner - Cannon iR3045

Hi,
At my office I have a Canon Photocopier iR3045N, working over a windows server 2003 network (with its own IP).
All went well when installing/configuring the printer and it's still working fine, the problem is to install the scanner, I just cant get it right.
So far, I've searched for canon drivers and applications, tried to "run" all of them (always with the scanner in online mode) but no results, I'm unable/detect to add the scanner and no idea wether I've the correct drivers or not.
Does anyone had experienced something like this? Please help.
Thank you and best regards,
Alex

Hi
Did you ever solved this problem, i just got such a nice network printer as IR3045N, its old, but fast.
I want to use scanner also, but i am stucked in finding software.
OSX is 10.8.2

Similar Messages

Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

HI
am unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed.

Hi @Chembo ,
I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
Restart the computer.
Disconnect the USB cable from the printer.
Run the uninstall from the CD.
Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
Make sure that the print spooler service is running.
Right-click Print Spooler, and then click Properties.
If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
Under Service status, click Stop and then Start, and then click OK.
Run the installation again and don't connect the cable until prompted.
Test the printer.
Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to install Network Adapter Driver for Windows Server 2012

Hi,
We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
Please help us to get it working.
Thanks,
Ronak Shah

It is not working as the system is having Intel® 82579V Gigabit Network Card
I guess, it's not supported on windows server 2012
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
NOTE: The following devices do not have driver or software support for Windows Server
2008 R2:
- Intel® 82566MC Gigabit Network Connection
- Intel® 82566MM Gigabit Network Connection
- Intel® 82567LF Gigabit Network Connection
- Intel® 82567V Gigabit Network Connection
- Intel® 82577LC Gigabit Network Connection
- Intel® 82579V Gigabit Network Connection
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own.
This posting is provided AS IS with no warranties or guarantees and confers no rights.
Blog |
Wiki

Unable to use network scanner

BACKGROUND: I have a Win XP PC and Brother MFC-5440CN (network ready printer/scanner/fax/copier) with wire connections to my new WRT54GS (v6). The WRT54GS replaced a D-link wired router.
PROBLEM: I can't scan. Printing works fine.
WHAT HAVE I TIRED: Disabled all software firewalls on PC but that didn't help.
REASON I'M ASKING HERE: Printing and scanning both worked fine when I had both devices connected to my old D-link wired router, so I'm thinking the problem may be a setting with the WRT54GS.
QUESTION: Suggestions? Troubleshooting ideas? Am I missing a setting on the WRT54GS?
Thanks for you help.
Mike

try uninstalling and reinstalling the printer drivers.....if this doesn't work , seems to be a router issue...

Unable to install network printer

hello:
i just got a network drive (Western Digital Netcenter) that has a print server as well. on my iBook (OS X 10.2.8) i can see the files on the network drive, but i cannot seem to add my printer (epson stylus photo r300). i can print fine from my PC from this networked printer. the instructions from WD say to click "Windows Printing" after clicking to add a printer, but this option is not available. any ideas?? thanks

no dice. sorry it's been a while for my response, but i've been out of town with the holiday. anyway, tried Wd-Netcenter as the share name as well as the printer name. WD says that the printer name should be the name of the model up to 13 characters, but printers with a name longer than 13 characters won't work with Mac and their network drive. no matter what i do i can install the printer, but when i try to print a document it times out with an error message saying "Cannot connect via Samba, will try again in x seconds" or something to that effect. i'm going to try updating the firmware on the network drive and try again but i'm not holding my breath given the level of support i've gotten from WD. thanks for all your help will update if i get things working....

Silly issue: Unable to install network drivers for Win2008r2 or Win2012r2

It must be because it's Friday evening and I'm just lucky like that but for some reason I'm not able to install the network drivers for my Windows 2008 R2 or Windows 2012 R2 installs in B200-M3 servers.
I've mounted the Cisco driver ISO (ucs-bxxx-drivers.2.1.3.iso) and in each OS I've gone to Device Manager, then had to View -> Hidden Devices to show the Network Adaptors, then tried to have it install drivers from the ISO but no luck. I did go to the correct subfolder Windows -> Network -> Cisco -> etc. and even tried just having it search the whole CD, searching subfolders. It either says no drivers found, or--for Windows 2012-- it says that Windows has determined that the driver software is up to date.
I've got to be missing something obvious. Any help would be most appreciated!

Hi Benjamin
We have done this many times; which UCS version are you using ?
Check
Interop Matrix http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2-21.pdf
and Installation Guide
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/os-install-guides/windows/b_B-Series_Windows_Install.pdf
Please use
ISO image of UCS-related drivers Release Date 12-DEC-2013
ucs-bxxx-drivers.2.2.1.iso
Normally you are asked during the Windows installation if you would like to install additional drivers; say yes, unmap the install iso, map the above driver iso, install fnic and enic driver; then unmap driver iso, map Windows install iso; do a refresh.
Good luck
Walter.

HP Laserjet M2727 Network Scanner intallation

I want to Install HP LaserJet 2727nf Serige SCanner in XP service Pack 3 System .
I have install Network Printer from HP Installation CD , But i am not able to install Scanner for it.
PLEASE Hel p me to Install Network Scanner of Give me Perfect software to Install the same .
You can Also inform be on my personal e-mail id
[Personal Information Removed]
Waiting for your valuable Responce

LydiaWhite88,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I'm unable to install I Tunes. I get a message "the feature you are trying to use is on a network resource that is unavailble". How do I solve this?

I'm unable to install I Tunes. I get a message "the feature you are trying to use is on a network resource that is unavailble". How do I solve this? Thanks.

I am having the same issue for itunes.msi (iPhone 4S and Windows XP)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable to install a software driver for Canon film scanner on mac OSX 10.6

I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

Hi Guys,
i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
Hp device Model.:- hp pavilion g4 1303au
Model no.:- 5c03213jsh
network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
Name: PCI Device
Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
Name: SM Bus Controller
Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
thanks,
Amit Rai

Hi:
SMBus controller:
Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install.
Download and unzip the file.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Ethernet: Download and install the 1st driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Card reader (PCI dev.): Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
Wireless: You will have to try the Vista driver for the Atheros wireless card...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
Attachments:
sp66185.zip ‏7 KB

Unable to install twain driver for Epson scanner -- Leopard

I finally got the printer driver working for my Epson CX6600.
Downloaded the correct driver from the Epson website and all is fine.
But now my scanner won't work.
The CX6600 is an all-in-one.
The Twain Scanner Driver was paired up in the same download.
However, after downloading the installer file I was unable to install it.
The cursor just spins and spins -- and I then get a repeated warning window asking if I want to open this software downloaded from the Internet.
I have to do a Force Quit to get out of the installer app.
Ideas?
Thanks,
Danty

where you able to resolve this problem? I also have this problem. Can scan manually.

Cisco Network Setup Assistant Unable to install the certificate on Android KitKat

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT. MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."

When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT. MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."
Does anyone know how to solve this tiresome problem, please!?? The update is downloaded upto 723.5MB, and is required upto 723,6MB, then the error message pops out! Tnx.

I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option.

Unable to install/uninstall iTunes. "Cannot access network location"

I am unable to install a new version of iTunes. I receive an error message saying "Cannot access network location: []" where there [] is an Asian character. I receive the same error when trying to uninstall iTunes as well. Can anyone offer help?
The following is a link to a screenshot of the error message:
http://imageshack.us/a/img855/47/32734805.png

Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

Unable to install network Scanner - Cannon iR3045

Similar Messages

Maybe you are looking for