Unable to install new drivers - Satellite 2450 (Win XP home)

After downloading and unzipping I find I am unable to install the new drivers (power saver). the setup halts and shows messages bout being unable to execute the command.

Hi
What exactly Satellite 2450-xxx model do you have?
I asked it because I have found many 2450 models with different power saver versions on the Toshiba driver download section.
Please be sure that you install right version

Similar Messages

  • Qosmio F10-136 - Unable to install any drivers

    I have a Qosmio F10-136.
    I have recently formatted the hard drive. Since I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available online from the Toshiba website but I have been unable to install any drivers except the wireless LAN. Most driver setups refuse to run at all, some seem to install the files, but the driver is not detected.
    Please advise.

    > 1. Sound device not working still - When I install the audio effect driver (i.e. toshiba virtual sound), there does not seem to be any effect even though it is installed. Then, when I install the SoundMax Audio System, it gives me an that the driver does not exist.
    What do you mean exactly by does not seem to be any effect. Can you hear the sound coming from the speakers? Are there any yellow exclamation marks related to the sound card? If not then the sound card driver has been installed properly and the sound should work!
    > 2. I cannot figure how to install the LAN driver.
    Where is the problem? Download the LAN driver, unzip the package, access the device manager, choose the unknown device (LAN card), point to the driver files downloaded from the Toshiba driver page and finish the installation.
    The LAN card should be recognized properly.
    > 3. Same with the TV tuner drivers; there is not setup file.
    As mentioned above; you can install the drivers in device manager. Choose TV tuner in device manager (possibly marked as unknown device too.) point to the TV tuner driver files and finish the installation.
    > 4. During the windows setup, I had created 3 drives, but I cannot access the drives D & E. When I try to access them, windows asks me to format them, but it gives me an error when I try to do so. Also, the hard drive is not shown in the disk management (not even C drive), so I cannot do anything. Although, the hard drive is shown in the device manager.
    If other partitions have been created on the HDD then this should be visible in disk management. I dont believe that you cannot see even the C partition. In my opinion you didnt check this correctly.
    Access the disk management (MY Computer, right click, manage). Choose Disk Management. There you should see the HDD and CD/DVD drive.
    If the partitions have been created but not formatted then you would see just a free space.
    Click right on this space and you could either format this or could delete the partition.
    PS: I recommend using a 3rd party tool like Partitions Magic in order to create the partitions on the HDD (Win XP)!!!

  • "Extraction Failed: Cannot Open Output File" error message when installing new drivers

    Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer.  I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
    Extraction Failed
    Cannot Open Output File
    And the process closes.  It happens at about 85% extraction every time.
    Any idea why?  I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support??  Poor, poor customer service.
    This question was solved.
    View Solution.

    Hi,
    If you haven't still got the  Full Feature software installer, download it from the link below and save it to your Desktop.  If you already have it, place it on your Desktop.
    ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
    Make sure the Printer is disconnected from your PC.
    Download and install 7-ZIP.  Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
    Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ).  Connect the printer to your PC when the software asks.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hi, I am unable to install new itunes version to windows 7 PC.  It requires application support and gives windows error 2.  I have tried to save on desktop and run as administrator but errors remains, what other options do I have

    Hi, I am unable to install new itunes version to windows 7 PC.  It requires application support and gives windows error 2.  I have tried to save on desktop and run as administrator but errors remains, what other options do I have?

    Hello, hanliefromzaf. 
    Thank you for visiting Apple Support Communities. 
    Here is an article that I would recommend going through when experiencing this issue. 
    iTunes for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Cheers,
    Jason H. 

  • When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT.  MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."

    When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT.  MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."
    Does anyone know how to solve this tiresome problem, please!?? The update is downloaded upto 723.5MB, and is required upto 723,6MB, then the error message pops out! Tnx.

    I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
    As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option.

  • Unable to install new iOS 6 software error 3004

    I am unable to install new iOS 6 software on my ipod 4 touch getting unknown error 3004

    mardanlou_ali wrote:
    unable to install update iOS 6.1.3
    Check that yours is not an iPad 1
    Identify iPad Models...
    http://support.apple.com/kb/HT5452
    If it is ... iOS 5.1.1 is as far as it will go.

  • Im trying to install new drivers for my printer and it will not accept my password

    Im trying to install new drivers for my printer and it will not accept my password

    Hey fyermanbob,
    Thanks for using Apple Support Communities.
    OS X Mavericks: If your administrator password was not accepted
    http://support.apple.com/kb/PH14014
    Have a nice day,
    Mario

  • Unable to install new component

    Hi All,
         We have new 11G UCM instance, we did migrated all our configurations from 10G to this new 11G instance. When we try to install components, it is throwing the below error
    Unable to install new component. Unable to read zip file contents /oracle/middleware/ucm_cluster/cs/vault/~temp/1938775032.zip.java.util.zip. java.util.zip.ZipException: Could not find End Of Central Directory
    Please let us know if we need to set any Environment variables or configurations to overcome this issue. Appreciate your help on this.
    Thanks

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Unable to install new apps from appstore

    I am unable to install new applications on my iphone 5. My device version is 7.1.1.
    When i tried to install, it is showing waiting on my device and nothing happened.
    I tried to install when my WIFI ON AND OFF.
    I did forced restore my iphone.

    Hello elmiliner
    It sounds like you are having issues with connecting to the internet. Check out the first article to troubleshoot that issue. If you are having issues, then try the second and third article for further troubleshooting.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/ts1702
    Regards,
    -Norm G

  • Unable to install new gnome icons.

    For some reason I'm unable to install new icon themes in gnome. I download the tar file and extract it to the .icons folder, but when I go to the "customize theme" settings it doesn't have the new icons... This is the same way that I've installed new icons with every other distro, but for some reason it's not working here... Have I missed something?

    sHyLoCk wrote:
    SemiBz wrote:
    sHyLoCk wrote:Create PKGBUILD Not necessary but it's fun and clean way.
    Maybe check out AUR for some icon themes?
    Umm .. Creating PKGBUILD could fix a *broken* theme ?
    No, but if you use PKGBUILD you wouldn't end up with a broken package.
    @OP
    Can you please post a link to the icon theme you are trying to use?
    http://www.gnome-look.org/content/show. … ent=101422
    sj87 wrote:
    You might want to rather just drag 'n' drop the tarball into the Customize Theme window and let it do all the work for you.
    Some lazy people do ignore the packaging rules and provide broken icon packages, so just extracting the contents to .icons might not be enough. The real icons folder might be a sub-folder in the tar archive's root or something like that, and you need to cp that folder into .icons.
    I've tried the drag 'n drop method as well, but when I drag my tarball in to the customize theme window, it doesn't stick, it just goes right back into the downloads folder.

  • Unable to install new programs

    I am unable to install new programs to my Mac book. The Mac's personal specifications is as follows:
    Software: Mac 10.5.4
    Startup disc: Macintosh HD
    Memory: 1G 667 MHz DDRZ
    When every I am trying in install or update my programs it gives me the following message and nothing I do can change it:
    Selection a Destination:
    Macintosh HD (111GB (13.8GB free) and !
    Installing this software requires 85.4MG of space
    You cannot install Norton Antivirus on this volume. This software must be installed on a volume containing Mac OS X version 10.4.10 or later.
    HOW CAN I RESOLVE THIS. Even if I go onto the internet to update my software it does not allow me to.
    Your urgent assistance is desperately needed. HELP :o)

    Verify the version of Norton Anti-virus you have is 10.5.4 compatible.
    Make sure your hard drive is less than 85% full (an arbitrary number which appears to create problems for Mac OS X)*:
    http://www.macmaps.com/diskfull.html
    Note running Norton Anti-virus on the Mac is normally something that's only needed to prevent you from becoming Typhoid Mary, more than prevent you from getting a Mac OS X virus, as there are none in the wild. There are some proof of concept trojan horses, but that's about it.
    - * Links to my pages may give me compensation.

  • HT2956 Unable to install new software, looping admin screen.

    I am unable to install new software on my iMac, I enter in the admin password and it doesn't progress to the installation screen, it just loops back to admin password entry. Please help

    Hi Kappy, this isnt the case, it accepts the password, I hit install and then the same screen pops up instead of proceeding to install the software. I even went in to check, change password and no joy

  • HT1926 unable to install new iTunes as it states it has an invalid signature. what is this.

    unable to install new iTunes as it states it has an invalid signature. what is this.

    That one suggests the installer has gotten damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Unable to install new display drivers

    When I'm in Windows 7, I want to update my display drivers because the ones I have are very old. However, when I try to install them using the Catalyst-program from ATI, they say everything installed, but nothing is there. I've checked the install catalogue, but it's empty. I've checked on Device Manager on my display drivers, and it's still the old one.
    The one I have installed is version 8.661.0.0, dated 2009-09-23. The newest one is like 10.2.
    This is seemingly affecting the performance on my computer because I can't use the new drivers.
    I've tried uninstalling the old ones and installing the new, didn't work. Tried using Driver Sweeper, didn't work. I don't know what to do, or if it's even possible to upgrade the drivers.
    I have ATI Radeon HD 4850.
    null

    I have installed the 10.3 on my 27" imac. i was able to play games on it with no problems.. xD
    installing it was pretty easy,
    1) install Catalyst 10.3 and follow the steps until you reached the finish page
    2) go to your Device Manager and look for Display Adapter
    3) click on it, and a sub tab should appear, mine was ATI radeon HD 4670
    4) right click and click update driver
    5) there should be 2 options which is search online and find on your disk...
    6) choose the second option
    7) that should bring you to the next page which you should click on the 'I have the file' option
    8) this should you bring you to a page with existing drivers
    9) click on have disk
    10) and search for the ATI file which you download.
    11) follow along the path, ATI>10_3xxxxxx>*something inbetween* > package>display>CL_xxx file ( i am currently not on the windows and just rambling based on memory, so pardon me.. =P)
    11) after selecting OK it should display a long list of drivers inwhich you just find yours
    12) install! the com should prompt you about how unsafe it is, but just click OK
    13) after the driver is install, it should be okay to try any games without any error.
    I hope this help you, but i do have one problem... once i have installed the driver, it works fine, but when i restart my computer, it will have a BSOD and i would have to restart and reinstall the driver... i'm pretty sure something is wrong with it... so if anyone has the same problem and have found a solution, please do tell me!... xD

  • Wireless problem since installing new drivers z61p

    I recently restored back to factory default for everything. Then happily headed over to lenovo drivers to download all new drivers for my Z61p (win xp) .
    got my sound running
    downloaded intel wireless driver
    got new access conections (since i was having a problem where the wireless would not switch on [using the Fn + F5..it just would not switch on] - managed to get it to now switch on at least)
    however now when i  switch my machine on i get an error message saying intel wireless management has to shut down - do i want to send an error report (i did..no response yet..if ever)?
    then
    access conections tells cant link to the wireless router..it simply finds nothing when i tell it to look for a network - never mind actually link to my preset office router
    digging a bit below the surface
    intel wants to report that i have the wrong driver installed (so i went back to the drivers site and downloaded again and installed again..no joy)
    as does access conections..(did the same re install...no joy)
    Do i have the wrong drivers?
    the site i used was:http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-64278
    then for intel the one called:
    Intel PRO/Wireless 2200bg, 2915abg, 3945bg, 3945abg, 4965ag, 4965agn Mini PCI adapter
    and then:
    ThinkVantage Access Connections
    am i being"dumb"?
    any help/ advice welcome.."other than just run the install file again"
    is there another source of drivers i could use?

    Got this sorted.

Maybe you are looking for

  • New ipod to replace stolen one, current iTunes, PC laptop - not happy! Help

    Okay so here is my problem - I'll try and describe what I've done as best I can. I've been through all the Apple help and can't see any error message info like the one I've had. Recently got new 30gB black iPod to replace a stolen one. As they only c

  • HT3951 how do I get a itune ringtone to be ringtone on my iphone 5?

    I found a ringtone in the iTune store, purchased same, it downloaded as music on my iphone 5, i want to use it as the ringtone for my iphone. How do I get it be a ringtone?

  • REG:Proxy

    Hi All,           I have a proxy-xi-file scenario.This interface doesnot need mapping, so i thought not to use design part, but  ABAP people needs the sender interface details to send the proxy to XI. Can i provide them a dummy sender interface detai

  • Modify email invitation/alert content in sharepoint online

    Hi, its a known bug that we can't modify the email notification messages thats being sent from sharepoint online site to the users. Just wanted to make sure microsoft has not yet make any update for this. ? or any other alternate / hack for this? Bas

  • Trying to render, get "Not Found" mesages

    Seems like I've had this problem years ago, but I can't remember what caused it. I have a section with 3 video tracks, 2 of which are nested sequences. When I try to render, it will render a portion of it if I hit "cancel", but if I try to render the