Unable to install new printer
I have tried everything. is there an 800 number to call?
Hi John, Welcome to the HP Community Forum. I am sorry installing the printer turned into Rocket Science. --------------------------------------------------------------------------------------- The answer is "It depends on where you live". If you are located in the US / Canada, you do have to first go through the Web form bits -- it only takes a couple of minutes -- and you leave your contact information. Not horrible, just different. If you are in the USA / Canada, fill in the Web form and leave contact information:Contact HP – USA - Assistance HP Tech support/ Customer Service – Some English Speaking CountriesIncluding UK and Europe HP Connected, ePrint, Instant Ink, and PrintablesIn USA or Canada, call Cloud Services: 1-855-785-2777 =====================================================================General Reference, Help, and Tips:Install Full Feature Software – Printer When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.
Similar Messages
-
Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?
Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H. -
When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT. MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."
Does anyone know how to solve this tiresome problem, please!?? The update is downloaded upto 723.5MB, and is required upto 723,6MB, then the error message pops out! Tnx.I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option. -
Unable to install new iOS 6 software error 3004
I am unable to install new iOS 6 software on my ipod 4 touch getting unknown error 3004
mardanlou_ali wrote:
unable to install update iOS 6.1.3
Check that yours is not an iPad 1
Identify iPad Models...
http://support.apple.com/kb/HT5452
If it is ... iOS 5.1.1 is as far as it will go. -
Trying to install new printer Canon imageclass 4880
Trying to install new printer on Mac Snow Leopard. Instructions are only for Windows. How do I get started installing the software?
You'll need to find the drivers. I found the imageclass 4890 OS X 10.6 drivers here, but didn't find 4880 drivers. Check the global Canon web sites.
-
Unable to install new component
Hi All,
We have new 11G UCM instance, we did migrated all our configurations from 10G to this new 11G instance. When we try to install components, it is throwing the below error
Unable to install new component. Unable to read zip file contents /oracle/middleware/ucm_cluster/cs/vault/~temp/1938775032.zip.java.util.zip. java.util.zip.ZipException: Could not find End Of Central Directory
Please let us know if we need to set any Environment variables or configurations to overcome this issue. Appreciate your help on this.
ThanksSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
Unable to install new apps from appstore
I am unable to install new applications on my iphone 5. My device version is 7.1.1.
When i tried to install, it is showing waiting on my device and nothing happened.
I tried to install when my WIFI ON AND OFF.
I did forced restore my iphone.Hello elmiliner
It sounds like you are having issues with connecting to the internet. Check out the first article to troubleshoot that issue. If you are having issues, then try the second and third article for further troubleshooting.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G -
Unable to install new gnome icons.
For some reason I'm unable to install new icon themes in gnome. I download the tar file and extract it to the .icons folder, but when I go to the "customize theme" settings it doesn't have the new icons... This is the same way that I've installed new icons with every other distro, but for some reason it's not working here... Have I missed something?
sHyLoCk wrote:
SemiBz wrote:
sHyLoCk wrote:Create PKGBUILD Not necessary but it's fun and clean way.
Maybe check out AUR for some icon themes?
Umm .. Creating PKGBUILD could fix a *broken* theme ?
No, but if you use PKGBUILD you wouldn't end up with a broken package.
@OP
Can you please post a link to the icon theme you are trying to use?
http://www.gnome-look.org/content/show. … ent=101422
sj87 wrote:
You might want to rather just drag 'n' drop the tarball into the Customize Theme window and let it do all the work for you.
Some lazy people do ignore the packaging rules and provide broken icon packages, so just extracting the contents to .icons might not be enough. The real icons folder might be a sub-folder in the tar archive's root or something like that, and you need to cp that folder into .icons.
I've tried the drag 'n drop method as well, but when I drag my tarball in to the customize theme window, it doesn't stick, it just goes right back into the downloads folder. -
Unable to install new programs
I am unable to install new programs to my Mac book. The Mac's personal specifications is as follows:
Software: Mac 10.5.4
Startup disc: Macintosh HD
Memory: 1G 667 MHz DDRZ
When every I am trying in install or update my programs it gives me the following message and nothing I do can change it:
Selection a Destination:
Macintosh HD (111GB (13.8GB free) and !
Installing this software requires 85.4MG of space
You cannot install Norton Antivirus on this volume. This software must be installed on a volume containing Mac OS X version 10.4.10 or later.
HOW CAN I RESOLVE THIS. Even if I go onto the internet to update my software it does not allow me to.
Your urgent assistance is desperately needed. HELP :o)Verify the version of Norton Anti-virus you have is 10.5.4 compatible.
Make sure your hard drive is less than 85% full (an arbitrary number which appears to create problems for Mac OS X)*:
http://www.macmaps.com/diskfull.html
Note running Norton Anti-virus on the Mac is normally something that's only needed to prevent you from becoming Typhoid Mary, more than prevent you from getting a Mac OS X virus, as there are none in the wild. There are some proof of concept trojan horses, but that's about it.
- * Links to my pages may give me compensation. -
HT2956 Unable to install new software, looping admin screen.
I am unable to install new software on my iMac, I enter in the admin password and it doesn't progress to the installation screen, it just loops back to admin password entry. Please help
Hi Kappy, this isnt the case, it accepts the password, I hit install and then the same screen pops up instead of proceeding to install the software. I even went in to check, change password and no joy
-
unable to install new iTunes as it states it has an invalid signature. what is this.
That one suggests the installer has gotten damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
PSE 6 - dosnt have all its selections and preferences since i installed new printer driver?
Hi
I have a Mac.
Installed PSE 6 - worked great. My printer broke so got a new one - installed new driver
and now I cannot print multiple photos, contact sheet or picture package at all - they are greyed out and I am unable to select them.
Any ideas as to what i should do. ?
ThanksQuit PSE then go to your username>library>preferences and delete:
com.adobe.Photoshop.Elements.plist
Adobe PSE 6 paths
Adobe PSE 6 settings
Opera preferences
Repair permissions and try again. -
Unable to Register new printer
I purchased a new printer (Officejet 6500A Plus) and registered it on ePrint with no problem initially. After registration, I noticed that I could use my facebook account as my login so I deleted my earlier account and logged in using Facebook but since then, I have been unable to register my printer (invalid code). I believe it thinks my printer is still attached to my earlier account but that account no longer exists.
I have disabled and re-enabled Web services on my printer and reprinted my address. I have also powered my printer down and back up.
The printer works otherwise ... I am able to connect to the internet and use existing installed apps to obtain content. I just am unable to set up my printer with an allowed user email list.The email address you get when you reprint your info sheet is valid for 24 hours - have you been trying to add your printer to your account within that time period after printing the info sheet?
Have you verified that you are getting a new email address when you remove/re-enable web services?
Last, but not least, (sorry, have to ask) are you sure you're typing the new email address accurately in the add printer dialog?
Just to confirm, the sequence of events was:
1. Enable web services
2. Create ePC account
3. Add printer
4. Delete ePC account
5. Remove/re-enable web services on printer and print web services info sheet
6. Try to add printer within 24 hours of printing info sheet
Is that correct?
Have you tried removing/re-enabling web services and printing the info sheet to try to add the printer to your account more than once?
Thanks!
I am an HP employee. -
Unable to install new driver for Quadro 4000
Hello
downloaded the new version 304.00.05f05 for quadro 4000. unable to install the new driver for NVIDIA Quadro 4000.
By clicking on the DMG I get a message "high-os-title high-os-message superimposed on the installer window
old NVIDIA driver already installed ; CUDA updated automatically to version 5.0.45
OS : Mountain lion
anywhere button activated in security window
Please helpTry downloading the update again. Perhaps the one you have got corrupted during the download process.
You can install updates in the Safe Mode and it should eliminate the possibility of other software interfering with the update process.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem.
Safe Mode
Safe Mode - About -
I have a computer dopwnstairs on wireless. Wireless Net gear home buisness. I am installing a new printer and it is a wired ethernet cable to main computerwhihc acts as the servier to the one downstairs. I cannot print from the one downstairs any lionger since installing a new all in one office jet 8500 910A in main office wiht ethernet cable connection. Have cheked connections and all OK?
I don't think this will work. Try connecting it with USB to the server PC. By the way, it will only share printing, not scanning or faxing. Why not install the printer via wireless (or is it a wireless version)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Maybe you are looking for
-
I have saved the XML data into a variable and want to retrive the values in XML and store them in separate variables.While trying to do this with Parsing I encounter an error in DOM creation.I have tried out following codes in Form:Ready event.But th
-
I have created another iTunes library (so I have 1 for an ipod touch and a separate 1 for an iPad), but the apps from the iPad appear in both libraries. How can I stop this so the 2 libraries are completely separate? Thanks
-
Hello Experts. I have a situation where I need the units of quantity to be converted at the query level. For e.g. if the value of the keyfigure is stored in litres in the Cube, then at the time of the query execution this value should be converted in
-
Groups field in Windows Active Directory doesn't get updated
Hello IDM Experts, I am trying to append one more group to a few hundred users in AD. When I run the below code, I am not getting any error and at the same time the groups field in AD doesn't seem to get updated either. Any thoughts? Thanks! <Activit
-
HI GIVE ME EXPLANATION ON SELECTION-SCREEN-ON??