Unable to install nvidea Video drivers after Bios update - Latitude E6530

I recently flashed my bios to the newest version
E6530A16.exe | Windows/DOS (9 MB)
Release date 23 Oct 2014|Last Updated 23 Oct 2014
Version A16,A16 
After that I can't install video drivers.  So I can't connect another monitor to my computer.
This is the driver I'm trying to install, 
"nVIDIA Graphics Driver for: Quadro 1/2/3/4000, Quadro 5010M, Quadro K1/2/3/4/5000M, Quadro K11/21/31/41/5100M, NVS 4/5200M, and GeForce GT 720M"
Version 9.18.13.2762,A07
I've also tried the Intel driver on the support page.
I'm running Windows 8.1x64 Professional and am up to date with all Microsoft patches.
The error I get is "The graphics driver could not find suitable hardware"

Hi hreinn1000,
I’d advise that you load defaults in the BIOS. Please follow the steps mentioned below to load the BIOS to defaults to check if the camera gets detected on the system.
Reboot the computer.
When prompted during POST, press the <F2> key to enter the setup screen.
On the System Setup screen, press the <F9> key.
Press the <Enter> key on Yes to Load Optimized Defaults and restart the computer.
Also, Also, I would suggest that you run the diagnostics on the computer by following the steps mentioned in the video below and check if there is any issue with the hardware on your system. Please private message us the system service tag so that we could check and assist you further. To send a private message, click on my name and send private message.
http://dell.to/164l6g4

Similar Messages

  • Mac - Unable to install Adobe Flash Player after Safari update

    After the latest Safari update (version 8.0.2) for Mac, I received a message that Flash Player was out of date.  I downloaded the latest Flash DMG file and when updating it stalls at 32%. Running the latest update for Yosemite.
    I've uninstalled all of Flash player and all files and folders related to Adobe Flash from the computer.  I've turned off my anti-virus and firewall.  It continues to stall at 32%.  I've re-downloaded the flash update and continue to have the problem.
    Any suggestions?
    Mike

    Try the offline installer:
    http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

  • I can't activate windows 8.1 pre-instal​led on my Toshiba E45-B4200 after BIOS Update

    I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
    Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
    I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
    Now I can`t update Windows, Office 2013, and so on. 
    I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
    I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

    It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
    - Peter

  • Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything.

    Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything and even after keeping it running for a long time there is no progress. Please help with this issue.

    Hi Prat,
    We are aware of this issue and are working on a fix.  In the mean time, please use the offline installer, posted at the bottom of the help page corresponding with your OS and browser:
    Installation problems | Flash Player | Windows 
    Installation problems | Flash Player | Mac
    The installers are at the bottom of the page, in the 'Still having problems' section.
    Maria

  • I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the  new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

    I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the  new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

    Thanks for your prompt reply. I'm not sure how to connect to the monitor as the only ports available on this model mac are Thunderbolt. The mini display to display cable supplied doesn't seem to work out of the TB port. Do I need to use a Thunderbolt cable + an adaptor?

  • Unable to install the trial version after the download is completed and Safari cannot open when I click to download again

    Unable to install the trial version after the download is completed and Safari cannot open when I click to download again

    aviatornilesh,
    You may try to restart the Creative Cloud application by quitting and relaunching it.
    This may be one for this specialized forum (where you may be able find the answer from previous threads),
    http://forums.adobe.com/community/download_install_setup
    or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
    http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
    or for Adobe Support (phone),
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

  • Problem in booting after bios update

    Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

    see help 8....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Satellite Pro L300: BSOD after BIOS update

    Hi
    after update the Bios of Satellite Pro L300, the windows not start!
    Its show the blue dead screen!
    What can i do?

    Hi
    Are you able to access the BIOS settings?
    Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
    Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
    But if the SATA drivers are not included the SATA mode should be set to compatible.
    Please check this!
    Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

  • After bios update side nomberpad is not workinh keys from 0-9

    after bios update side nomberpad is not workinh keys from 0-9

    Hello jay04,
    Welcome to the HP Forums!
    I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Thanks!
    Mario
    I worked on behalf of HP.

  • My ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

    my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • After BIOS update Satellite L350-172 doesn't start anymore

    Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
    I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
    "It was stopped for reason not to damage the Computer" - blue schreen.
    How can I downgrade the bios again? Or - what have I to change in the bios-settings?

    Hi schuwe,
    Im a little bit confused about your posting. How do you tell your BIOS not to restart?
    Anyway, after BIOS update you should load the default settings in BIOS.
    Did you choose the right BIOS especially for your model?

  • Can i un-install the old versions after 2014 update

    I now have 3 versions of every application installed on my desktop,
    CC
    64bit
    (2014)
    can i un-install the old versions after 2014 update?
    aldo I have a 64bit platform is the new (2014) 64bit or do I have to install that version????!!??

    We don't overwrite your apps so you can keep previous workflows.
    Delete apps you don't want when you are ready.
    Please refer to:
    https://helpx.adobe.com/creative-cloud/faq.html#deskApps
    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.htm
    Regards
    Rajshree

  • Hi . plz help me. after bios update. i could work till I shutdown

    After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
    I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

    take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

Maybe you are looking for

  • App to convert long voice memos to text

    Is anyone aware of an app (on Mac or iPhone) that can convert long (over a couple minutes) dictation to text? Dragon Dictation for iPhone works great, but it only handles recordings up to 30 seconds. It seems like there would at least be some Mac app

  • Creative cloud is annoying me.

    Firstly, the things you need to know about the problem Im on an iMac 27" running 10.9.1 I really want my CS 6 apps to update, because they need to update first before they can run I really dont want to re-install it I really cant wait for an answer S

  • Installing CF9 on Windows Server 2008 Standard 64-bit

    Hi- I'm attempting to  install a new ColdFusion configuration with a host who is useless  regarding the support that they offer (for now, they shall remain  nameless). It's a Windows Server 2008 Standard 64 bit VPS  configuration. MySQL is already in

  • Connecting MacBook (2007) to iMac (2012)?

    Hi! I have a broken old MacBook from 2007, i have a files on this which I would like to transfer to my reasonably new iMac which I brought in 2012. My question(s) is what cable would I need to transfer data from my old Macbook to my iMac, would I als

  • How to run java on computer without java from flash drive

    Im running a chess club at school and the school computers, you aren't allowed to install on the hard drive. Is there a way to put an ide and the java folder containing the jre and jdk on a flashdrive and run the ide and run programs solely from the