Unable to install officejet 6100 driver on windows 7

Hi I am unable to install the HP6100 Officejet All in one driver for WIndows 7 enterprise. I keep receiving an error indicating that MSVCR90.dll is missing, but the file is there. Any help would be appreciated.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Similar Messages

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Unable to install Network Adapter Driver for Windows Server 2012

Hi,
We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
Please help us to get it working.
Thanks,
Ronak Shah

It is not working as the system is having Intel® 82579V Gigabit Network Card
I guess, it's not supported on windows server 2012
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
NOTE: The following devices do not have driver or software support for Windows Server
2008 R2:
- Intel® 82566MC Gigabit Network Connection
- Intel® 82566MM Gigabit Network Connection
- Intel® 82567LF Gigabit Network Connection
- Intel® 82567V Gigabit Network Connection
- Intel® 82577LC Gigabit Network Connection
- Intel® 82579V Gigabit Network Connection
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own.
This posting is provided AS IS with no warranties or guarantees and confers no rights.
Blog |
Wiki

Unable to install magic trackpad driver on Windows 7 on MBP

I recently purchased a Magic Trackpad and it's working perfectly on the Mac side of my MBP. However, I downloaded the 32-bit driver for my Winfows 7 Bootcamp side and every time I try to run the driver I receive the following error:
"Windows Installer
The installed product does not match the installation source(s). Until a matching source is provided or the installed product and source are synchronized, this action cannot be performed."
It then tries to point me to the following source "C:\ProgramData\Apple\Installer Cache\Boot Camp 3.0.0\". If I press OK it tells me that the file there is not valid. I also tried pointing it to the OSX install disc in my optical drive and it doesn't work. Any ideas would be greatly appreciated.
Thanks!!

Hi Stefan, I checked the version on my Boot Camp drivers and they are in fact 3.1. Checking a little further I seem to have found two issues:
1. It seems that it's not only this, but any type of update I try to do it tries to find the drivers in folder 3.0.0.
2. The Boot Camp install I'm asking help with is actually one I migrated to my new MBP using winclone. I moved from a 2009 2.4GHz MBP to a 2.66GHz MBP. I tried to update the old MBP's driver and it does so successfully, so this leads me to believe that the winclone install didn't go 100% perfectly. I will try to reformat my Boot Camp partition, reinstall Windows 7 and then try to update to see if this resolves the issue.
Thanks for your help and I'll post back with my results in a couple of days.
Message was edited by: sole2000

Unable to install officejet pro k550 in windows 7

Driver failed to install. Have also tried info from this page http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02663702&lc=en&dlc=en&cc=us and still cannot get printer to install. Either as a network or when connecting via USB. USB printing gets installed and is ready and working but not the printer driver. I am doing everything on the Win 7 laptop as an administrator. I've installed Dell, Lexmark and an HP Color LJ CP1215 with out any problem but not this officejet pro k550.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

Installing 7.2. Says "Unable to install the gear driver set at this time...

Hello, Im trying to Install ITunes 7.2, and I get this error:
"Unable to install the gear driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again"
I am installing ITunes for the very first time on my comp, cuz I just received a new 2GB Nano.
I've tried rebooting,tried uninstalling my Quicktime and removing it from my comp, uninstalled and cleaned any remnants of previous ITunes using the windows cleaner, disabling both my mcafee and pccillin, and it still comes up with the error.
I'd be indebted to any suggestions or resolutions!
Thank you!
E Machines T6216 Windows XP

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil Kumar

You really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Unable to Install Crystal Reports 2008 on Windows 7 64 bit

Hi,
I am unable to install Crystal Reports 2008 on Windows 7 64 bit laptop. Is this not supported?
BR, Nanda Kishore

i INSTALLED NOW

Unable to install C4500 HP printer on Windows 7

unable to install C4500 HP printer on Windows 7 - printer installation disc only supported by xp and vista. What do I need to do??
This question was solved.
View Solution.

Hi,
You may download the Windows7 compatible software below:
http://ftp.hp.com/pub/softlib/software11/COL30130/mp-74912-1/PS_AIO_04_C4500_USW_Full_Win_WW_130_140...
Make sure the USB cable is unplug before performing the installation.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to install Adobe CS2 Premium on Windows OS 7. How do I fix this ?

I am unable to install Adobe CS2 Premium on Windows OS 7. My discs require activation but do install to the OS. The non-activation version recommended gives the error message that" this version is not compatible wih OS" and will not install.
Thanks, Liz

Hi Issieoo,
Though you may install Cs2 on Windows but you may face performace issue. Please find the System Requirement for installing for one of the CS2 product: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop.html . However I would recommend you to purchase the new CC realease with more enhanced functionalities and features.
Regards,
Romit Sinha

Unable to install officejet 6100 driver on windows 7

Similar Messages

Maybe you are looking for