Unable to install Officejet Pro L7590 print driver in Windows 8.1

I have lost days of time trying to get my OfficeJet Pro L7590 to print properly and otherwise operate in a stable manner. My computer is a new Dell XPS8700 running Windows 8, upgraded to Windows 8.1 via the "Store" app after purchase. My problems started soon after the 8.1 update.
The primary problem symptom is the printing of about a half page of text fine, then the printer spits the page out and prints several more pages of mostly blank paper with random symbols around a top or side edge. This occurs regardless of the program doing the printing, i.e., MS Word, Excel, Acrobat, etc.
I have run the Printing Doctor program many times which doesn't fix anything, despite its claims to the contrary (more below).
I have been on this forum many times and tried multiple instances of uninstall/reinstall without success. The HP Installer may make it through the whole installation process but unstable performance of the printer is the outcome. Uninstalling the printer software using HP's uninstaller ALWAYS crashes before it can finish uninstalling. I get a message of "HP Installer Uninstaller has stopped working". I would attach a screenshot here but I does not seem an option in this window.
I have run multiple versions of HP's scrubber programs which also crash by level 2 with same message. I still ran L4 regardless but that crashes, too. That's the constant of every uninstallation or scrubbing effort using HP's programs: a crash without an error message given beyond the "HP Installer Uninstaller has stopped working".
I run the Printer/Scanner Doctor tool when the software was malfunctioning and it always finds a Print Spooler problem, "fixes" it but the problem remains. This posting is coming after the "Doctor" tool told me to uninstall the program. HP's uninstaller crashed, as usual, but the I was told to use Windows Add/Remove programs to finish the job. I did. I have not tried to install the program again and am becoming close to 'Refreshing' my entire Windows program, which will require reinstalling and updating Windows and every program I use - which will take days. I hope to avoid that step.
Dell's hardware analysis utility tells me everything hardware is great!
I truly believe HP's software IS THE PROBLEM and would love to figure this out. The printer has always worked great - until the Windows 8.1 update. The scanner will work fine (usually) after I reinstall the software. I used the printer before on my prior computer running Windows 7 with no trouble.
Going into today's crash info, via Event Viewer, I have this message from the error log:
Application 'C:\Program Files (x86)\HP\Digital Imaging\bin\hpqbam08.exe' (pid 3960) cannot be restarted - Application SID does not match Conductor SID..
And this error occurred just after:
Faulting application name: svchost.exe, version: 6.3.9600.16384, time stamp: 0x5215dfe3
Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53087867
Exception code: 0xc0000005
Fault offset: 0x0000000000005fc4
Faulting process id: 0x1284
Faulting application start time: 0x01cfe34585c8f1c4
Faulting application path: C:\WINDOWS\system32\svchost.exe
Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
Report Id: a118ba71-4ff5-11e4-bea6-34238711e0a0
Faulting package full name:
Faulting package-relative application ID:
There was an earlier - about 30 minutes earlier - warning saying:
The application (HP Solution Center, from vendor Hewlett-Packard) has the following problem: To function properly, HP Solution Center must be reinstalled after you upgrade Windows.
I have reinstalled it many times. I have used HP's installation & uninstallation utilities, including the Installation failure utility, none of which install the program properly, CERTAINLY not well enough that I can EVER uninstall it without a crashed uninstallation per description above...
I think I have reviewed and tried every "canned" HP quick solution, and not so quick solution, on this forum.
Comments?
Richard_L

Added Info for original posting:
Windows 8.1 64 bit OS. Dell box shipped with Windows 8 and upgraded to 8.1 via the Windows store. As stated in original post, computer is Dell XPS 8700, I7 cpu with 16 gbs of RAM.
Happy to answer any more specific questions.
Richard

Similar Messages

Unable to install Officejet pro 8600 printer on work network using HP software on Win10

I have recently updated my Surface pro 3 to Win 11. I am trying to install my printer using the HP setup software. This had worked with Win 8.1. The software was never able to detect my printer automatically but in the past I could enter the IP address and it would connect. This is not happening, when I select wired connection, it just fails never giving me the option to enter the ip address. I can install the printer using the W11 control panel but the Scanner features if the HP software (HP printer assistant) will not work this is frustrating for me. Please help.Regards,Michael

I found the solution to this problem. You just need to run the automatic install wired function twice and then it will ask for the IP address. Once I did that and entered the IP address it worked fine. It just should be an option to begin with or show up after one failure. The fact that I had to let it fail twice was confusing.Michael

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro L7590 printer auto document feeder stopped working

HP Officejet Pro L7590 (Model: CB822A)
Mac OS X Yosemite 10.10
My automatic document feeder stopped working about a month or two ago. If I put a bunch of papers under the tray there is no beep/light to acknowledge that. So, I can't copy a bunch of papers at once.
Is there a recommended HP repair center/store in my area that can fix it? I'm in Bethesda, MD 20817.
Thanks
This question was solved.
View Solution.

Hi @rustyblue
Although HP does not have an authorizes repair facility that I can refer you to, I have located 2 helpful documents that would allow you to troubleshoot the issue yourself;
An 'Original Jam: Clear jam, and then press OK' Message Displays for HP Officejet 6100, 7100, and D ...
Automatic Document Feeder (ADF) Does Not Pick Up Paper
If the issue persists, you can take the printer to a local mom and pop shop, or maybe call HP. HP could offer you a discount on a newer model.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Unable to install officejet pro k550 in windows 7

Driver failed to install. Have also tried info from this page http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02663702&lc=en&dlc=en&cc=us and still cannot get printer to install. Either as a network or when connecting via USB. USB printing gets installed and is ready and working but not the printer driver. I am doing everything on the Win 7 laptop as an administrator. I've installed Dell, Lexmark and an HP Color LJ CP1215 with out any problem but not this officejet pro k550.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Unable to install OfficeJet Pro 8000 firmware upgrade BZM1FN1006BR

My OfficeJet Pro 8000 A809n has the original firmware, 0842BR. My understanding is that the upgrade to 1006BR will address some issues I'm having with paper handling and network connectivity.
When I use the HP Download and Install Utility (DAIU), it downloads the firmware download utility (HP Officejet Pro Firmware - OfficejetPro8000_R1006BR_ENG.exe) to my hard drive. However, when I use the "Install" feature, I get this error:
"Firmware Download Utility has stopped working A problem caused the program to stop working correctly. Please close the program."
I've tried to run the software directily from my hard drive as well but it gives the same results. Some have reported that the issue may be related to running firewall software on my laptop (Lenovo W530 with Windows 7 64-bit) but I get the same problem when I disable Symantec Endpoint Protection.
I would appreciate any help in resolving this issue!

Hello there
I have some more suggestions for you! I would first suggest printing out a test page, see the below image for instructions on how to print out a quality page. I ask you to try this to see if the printer will produce a test page from the unit itself (without involving the computer). Basically, this makes sure the printer is in good working order before we continue software troubleshooting. If this page prints, continue the steps below the image, if not, let me know!
Also, please let me know some more about the paper handling and network connectivity problem you have been facing. Ex: Does the printer loose it's wireless connection? Will it not pick the paper and feed the paper through?
Source
Software troubleshooting if the printer printed a quality page fine:
Run the Microsoft Fix it tool here, to uninstall the printer: Fix problems that programs cannot be installed or uninstalled
Restart the PC.
Perform a Clean Boot again and restart the PC afterwards.
Disable any firewalls and anti-virus.
Run the installation again.
Happy Wednesday!
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet Pro L7590 Print Quality Problems - Black/Yellow Printhead

Officejt Pro L7590 All-In-One
Running on Windows 7 64 bit, USB connected to computer
Approx 2.5 yrs old; has printed 30,000 pages.
Issue: Black/Yellow printhead replaced about 500-1000 pages ago; new unit only tested as "Fair" in diagnostics, even though it was fresh outta the box. Print Quality good.
About two weeks ago, printer refused to print, flashing ambler "!", etc., error message regarding black/yellow printhead.
Ordered replacement ($71 again -- ouch! Whole printer only cost $199 30 months ago).Again, new unit only "fair" in diagnostic (original Cyan/Magenta printhead still reads as "good").
New printhead required much cleaning and aligning, and now prints with large gaps on a regular basis down the page. Talked to tech guy @ Staples where i bought it; his only "helpful" suggestion was that most people just toss the printers the first time the printheads go bad.
Print heads are separately warranted.
My questions:
(1) What else is there that's screwing up my print quality,a nd is it fixable?
(2) Can i get my $ back on the two printheads that didn't fix the printer's problems?

I've included a link below to help you troubleshoot rpint quality issues...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu03037&tmp_task=solveCategory&lc=en&dlc=en&cc=...
This document provides some system settings that may help fix the issue.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Officejet Pro L7590 - Printer intermittently skips printing complete lines of black ink.

My Officejet Pro keeps intermittently skipping lines of black ink when I copy or print a document. There appears to be no pattern as to where on a page the line skips printing. When I initially replaced my B/Y printhead, the problem appeared to have stopped and the pages appeared to be printing OK. But after a day or so, when I would print or copy another document, the problem reappears. I have also replaced the black ink cartridge (twice), the problem still exists.
I love this printer because, when it's working, it prints and copies documents with excellent speed and clarity. I don't want to spend another $200+ dollars for a replacement HP printer or an inordinate amount for repair of the existing printer. Any suggestions??
This question was solved.
View Solution.

THANKS VERY MUCH. Your suggestion seems to be working.
I was hesitant about replying too soon because I wanted to be sure the problem has been corrected this time.
Initially, I replaced the black ink cartridge (for a second time), but this didn't correct the problem. Next, I replaced the black (B/Y) printhead (for the second time). Now the printer is working just fine.
May be the first replacement printhead was defective, since the second replacement printhead seems to have solved the problem. Fortunately, I was able to get a refund (replacement) for the first printhead.
Thanks again for your help.

Since update HP Officejet Pro L7680 printer work with Windows 7 I have an HP busy icon

HP Officejet Pro L7680. Serial #[removed for privacy] . Windows 7 64 bit Home Premium.
The install seems to have worked well, but there is now an HP busy icon in mid-screen for the past 24 hours. Can I get rid of it? I've tried evrything but a re-boot and don't want to do that if it will interupt a process.

I have the same issue with my OJ 6500 (network connected). And I've been just been sent on a wild goose chase to install the support assistant - which didn't actually resolve my issue. When I go directly to the drivers, it recognizes my OS as Windows 10, but doesn't give me a matching driver package to download... How/when will this be resolved? Does anyone have a workaround?If I knew that my printer/scanner doesn't work anymore I certainly wouldn't have upgraded to Windows 10. Win 8.1 wasn't perfect, but at least everything worked... Thanks for any suggestions!

Failed to install Officejet Pro 8610 over Ethernet on Windows 8.1 64-bit

When attempting to run the installation of Officejet Pro 8610 using wired Ethernet connection the setup quickly lists the printer with correct IP and MAC address but when this is selected takes ages in the "installing" state and eventually displays a graphic indicating that the connection is broken.
I have tried disabling firewall (ESET) and a clean boot, and have downloaded latest software.
The printer is connected using a cross-over internet cable, can be pinged and obvious is detected by the setup program.
Attempting to install using WiFi has the same results, ie finds printer but then fails (although I haven't retried this since downloading latest software or with a clean boot).
FYI the printer will work when connected using a USB cable. (has been disconnected and software uninstalled before re-trying above). Don't really want to use this as the printer will be too far from normal working position. Wifi would be preferred but cabled Ethernet would be OK.
Also printer works OK via Wifi using e-mail.
Computer is a HP ProBook 4530s which has recently been upgraded to Windows 8.1 Professional x64 with no other significant problems.
Apologies if this is already answered elsewhere but couldn't find any replies which refer to something not already tried.
Thanks

Downloaded and ran the HP Printer Install Wizard for Windows as suggested, still did not work. Here are some screen shots of what happenned
Right Click on Open File Location (step 3) opens the window in the previous screen shot.
I never saw any of the items in step 4, but double clicking the shortcut that was displayed started the same installation process that always fails, see following screen shots. Note I disabled the firewall while running this.

HP Officejet Pro L7590 printer

I am desperate for help. Been at this for 2 days. No communication between printer and computer. Tried all fixes. Went to HP site to download drivers, etc. 98% into install I'm told there's a newer version (how can that be if I'm downloading the latest from the site???) on my computer. Uninstall and try to reinstall but get same message or just Installation Failure message. Call HP for help & told there must be something still in the registry and to contact Microsoft for a Windows Installation Cleanup Utility. Can't even find one directly from MS. I finally get the printer to show up but no HP Director. Guess what?? I'm told to go to HP and download latest software and drivers because HP Director can't be installed on its own. Same problem. Failure to install.
WHAT CAN I DO??? I've lost 2 days of work over this. Please send answer and hopefully instructions to correct this horrendous problem to my email: {Personal Information Removed}. Thank you in advance.

Did you ever get this resolved? I am having the same issue right now. It is frustrating. email me at [Thank you for visiting the HP Support Forums. I am sorry to inform you that your post has needed some editing to remove personal information.]

HP officejet Pro L7590 Prints 1/2 of the text line on several lines of document

I got an email for diagnosing the printer and I was prompted to install updated drivers and I did that and now when I print the test page I get several lines of text that only prints the top or bottom 1/2 of the letters across the page, I Printed a self test diagnostic Page and it printed everything in pink but it did not print 1/2 letters across the page like the test page,Then I printed a Print quality page and it did the same as the test page and it did the same as the test page, then I tried to calibrate the line feed thinking that may correct the problem but did not, What what can I do ????
Irven
This question was solved.
View Solution.

Hi mmcmret8,
Thank you for your reply! It is possible the printheads might need to be changed, at this point I would recommend to please call our phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best regards!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro L7590 - print quality issue

We've had a lot of problems with this unit since day one. It simply wouldn't work with our XP computers. Thankfully it does work with our new Windows 7 computer.
The problem I'm having is that I have to clean the printheads at least once, if not twice, before every print job if it hasn't printed anything recently (even an hour or two).
Although we've had the printer for a while, it has hardly been used because it wouldn't work with our previous computers (and I gave up trading emails with HP support because the situation just got worse each time we tried something, not better). The myPrintMileage function says we've printed just over 300 pages (and I can pretty much guarantee that at least 250 of those have been diagnostic pages trying to get it working, not actual print jobs).
The only advice I can find on the troubleshooting page is to replace the printhead/s. Is that really the case? We have already had to replace ink cartridges before we ever got the printer working. If we now have to replace one or both printheads this machine is proving very costly to run. I would be very disappointed to find we had had to replace all four ink cartridges and both printheads before we ever got the machine working properly.
I'd appreciate any feedback you can offer on this please.

I've included a link below to help you troubleshoot rpint quality issues...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu03037&tmp_task=solveCategory&lc=en&dlc=en&cc=...
This document provides some system settings that may help fix the issue.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

HP Officejet Pro L7590 - printer cartridge door clasp broken

The plastic clasp on my printer cartridge door broke. The printer thinks the door is open and will not print. What can I do?

Hello Lacanz,
Thanks for the post. With this one, I've included a link below to access the HP Parts store. Here you can access replacement parts and order either by phone or on line. I did check this one for you and good news!, they are available and in-stock now. Good Luck!
HP Parts Store #: 1-800-227-8164
Part number: C8187-67304
Description: Pen Cartridge Access Door
Price: $13.84
Link: http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=ED4C7BE2C6FD442C973E7438D23B7FB8&Searc...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Unable to install Officejet Pro 8000 Wireless software & no help in forum

http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Can-t-cure-a-quot-MSI-BufferChm-Error-1...
I posted a request for assistance in this forum, at the thread above, per so many HP instructions. No HP employee replied. There are consumer-users in the forums instead. I understand that they don't have experience in all models or all problems, but If HP is going to advertise the forum as one of their "solutions" in so many places, there should be employees here to handle customers' problems.

Welcome to the HP Consumer Support Community.
This is a peer-to-peer community for customers to connect and share solutions regarding their HP products. If you have additional or direct feedback for HP about their products or services, please use the link below.
http://welcome.hp.com/country/us/en/wwcontact_us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
Thank you.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Unable to install Officejet Pro L7590 print driver in Windows 8.1

Similar Messages

Maybe you are looking for