Unable to install on N8 after update

Hello everyone,i have a problem,please help,i update my N8 software to symbian Anna,since update i can't install anything on my phone,that includes the applications from ovi store,so please a little help,thank you !!!
Solved!
Go to Solution.

@marioshik
Can you install simple application such as this which does not require Ovi Suite/Ovi Store?
http://www.smartphoneware.com/screen_snap-for-symbian3-product.php
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Unable to install any addons after updating to Firefox 7.0.1

    I am not able to install any addons after updating to firefox 7.0.1. Addons are still working. Addons will start to download but will get stuck at 100% download progress.

    What addons do you already have installed? Could be one of them is interfering with the downloads somehow...

  • Unable to install IWork'09 after update

    Thank you all in advance. Any advise will be helpful.
    This topic has been covered before, but following the instructions did not solve my problem.
    I had Snow Leopard in my macbook pro, then after I broke the hard disk took it to repair at apple assistance and got a machine updated to mountain lion.
    TIn snow leopard I had iWork installed from a trial version (downloaded from web site apple) with purchased serial number.
    I downloaded the update (for my version) and pages stated acting weird.
    I uninstalled everything, wanting to start from scratch but Numbers and Keynote would work while Pages would give me an error message.
    Now, I followed some of the tutorials on the forum and deleted all playlists, receipts, .pkg  etc related to the program, and deleted (again) iWork.
    Now, the message is… unable to install, contact.. bla bla.
    In the mean time I bought a new macbook pro (13") that came with mountain lion installed.
    I have uses the same .dmg iWork trial version, added the serial number and it works fine.
    So, it seems to me like there is no problem with the .dmg file or the serial number with mountain lion,
    Just with the updated version on the old machine.
    Can you help me?

    @marioshik
    Can you install simple application such as this which does not require Ovi Suite/Ovi Store?
    http://www.smartphoneware.com/screen_snap-for-symbian3-product.php
    Happy to have helped forum with a Support Ratio = 42.5

  • Unable to install any applications after updating ...

    Hi guys!
    I updating software my mobile n78 to version date 10-3-2009
    custom version
    21.002.051.1
     custom version date
    18-02.2009
    After that if I try to install any application the mobile is say the file is corrupted
    I need to help
    Solved!
    Go to Solution.

    thanks for help me

  • In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)-regardless of the site from which I download the installation folder.

    In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)—regardless of the site from which I download the installation folder.

    Hello everybody, good news: after upgrading to Mountain Lion 10.8.5 I've been able to run the installer and all went fine.
    Mountain Lion allows user to force execution through the context-menu (CTRL-click) Open command and it does work, just that simple.
    So my advice is: if you want to install or re-install Flash Builder 4.6 on a Mac with Lion installed, upgrade to Mountain Lion or better to avoid problems.
    Apple introduced some (not all) Gatekeeper functionalities in 10.7.3 and following, but apparently you need a full-fledged 10.8 to have also what you need to circumvent a Revoked Certificate error.
    Since usually OS X has auto updating active, if you are running Lion you end up with 10.7.5 and won't install FB46. If you manage somehow to hold 10.7.2 I suppose you should be able to install FB46, sincerely I didn't check it out. Anyway it's simpler and safer to move on to 10.8.x.
    Bye

  • I am unable to activate my iphone after update

    i am unable to activate my iphone3gs after update ios with 6.1.3
    help me soon

    Try troubleshooting activation issues.

  • I am unable to install the creative cloud update - error 43 comes up at around 77%

    I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

    WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
    Mylenium

  • Cannot install Touch ID after update 8.1.3 in iPhone 5s.

    Cannot install Touch ID after update 8.1.3 in iPhone 5s. In trying to install unlocking my phone is refused, as is allowing access to iTunes and App Store. Before updating I used Touch ID without any problem.

    Restore iPhone with iTunes on computer. If after the computer Restore there are still problems, iPhone 5S has Warranty, make Genius reservation or set up service and take or send iPhone to Apple for resolution.

  • [SOLVED] Unable to start vmware 9 after update

    Hello Folks,
    I got one weird issue after update,
    I tried to start vmware, failed as nothing happeded, no error message shown.
    Do you have any clues ?
    ┌─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# uname -a
    Linux tp 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64 GNU/Linux
    ┌─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware-modconfig --console --install-all
    Stopping VMware services:
       VMware Authentication Daemon                                        done
       VM communication interface socket family                            done
       Virtual machine communication interface                             done
       Virtual machine monitor                                             done
       Blocking file system                                                done
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/hostif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/memtrack.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/linux/driverLog.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/apic.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/vmx86.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/cpuid.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/task.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/hashFunc.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/comport.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/common/phystrack.o
      CC [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmcore/moduleloop.o
      LD [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmmon.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmmon-only/vmmon.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmmon-only/vmmon.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
    cp -f vmmon.ko ./../vmmon.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/hub.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/netif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/userif.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/bridge.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/filter.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/procfs.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/smac_compat.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/smac.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/vnetEvent.o
      CC [M]  /tmp/modconfig-CEZuvv/vmnet-only/vnetUserListener.o
      LD [M]  /tmp/modconfig-CEZuvv/vmnet-only/vmnet.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmnet-only/vmnet.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmnet-only/vmnet.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
    cp -f vmnet.ko ./../vmnet.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/filesystem.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/file.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/stubs.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/block.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/module.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/control.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/super.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.o
      CC [M]  /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.o
    /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: initialization from incompatible pointer type [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: (near initialization for ‘RootInodeOps.lookup’) [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: initialization from incompatible pointer type [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: (near initialization for ‘LinkDentryOps.d_revalidate’) [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c: In function ‘DentryOpRevalidate’:
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: warning: passing argument 2 of ‘actualDentry->d_op->d_revalidate’ makes integer from pointer without a cast [enabled by default]
    /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: note: expected ‘unsigned int’ but argument is of type ‘struct nameidata *’
      LD [M]  /tmp/modconfig-CEZuvv/vmblock-only/vmblock.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmblock-only/vmblock.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmblock-only/vmblock.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
    cp -f vmblock.ko ./../vmblock.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/linux/driver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/linux/vmciKernelIf.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDriver.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDatagram.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciResource.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciRoute.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciContext.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciHashtable.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciEvent.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciQueuePair.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciQPair.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/common/vmciDoorbell.o
      CC [M]  /tmp/modconfig-CEZuvv/vmci-only/driverLog.o
      LD [M]  /tmp/modconfig-CEZuvv/vmci-only/vmci.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vmci-only/vmci.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vmci-only/vmci.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
    cp -f vmci.ko ./../vmci.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
    Using 2.6.x kernel build system.
    make: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
    /usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
    make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/af_vsock.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/vsockAddr.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/notifyQState.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/util.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/stats.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/linux/notify.o
      CC [M]  /tmp/modconfig-CEZuvv/vsock-only/driverLog.o
      LD [M]  /tmp/modconfig-CEZuvv/vsock-only/vsock.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/modconfig-CEZuvv/vsock-only/vsock.mod.o
      LD [M]  /tmp/modconfig-CEZuvv/vsock-only/vsock.ko
    make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
    /usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
    make[1]: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
    make[1]: `postbuild' is up to date.
    make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
    cp -f vsock.ko ./../vsock.o
    make: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
    Starting VMware services:
       Virtual machine monitor                                             done
       Virtual machine communication interface                             done
       VM communication interface socket family                            done
       Blocking file system                                                done
       Virtual ethernet                                                   failed
       VMware Authentication Daemon                                        done
    Unable to start services
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─# vmware
    ┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
    └─#
    Thanks in advance,
    Liao
    Last edited by liao (2013-01-11 14:10:29)

    after check vmware message under /tmp/vmware-$USER/vmware*.log, found one package is missing - libpng12, after installed it, everything looks good again

  • HT4623 I am unable to activate my 3gs after updating to ios 6.0.1

    I am unable to activate my 3gs iphone after updating its software from ios 5 to ios 6.0.1. It gives the message: "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes. If this problem persists, contact Apple Support at apple.com/support."
    I have read many blogs on the same problem on different websites but could not solve this issue. I am quite disappointed.

    Yes that was but it was long time ago when it was jail broken.
    Is there any solution now that I can bring it on the working path again?

  • Unable to Install the latest iPod update

    Whenever I try to install the latest iPod Updater, I get an error 1607: Unable to install InstallShield Scripting Runtime. What's wrong?

    http://docs.info.apple.com/article.html?artnum=300361
    http://consumer.installshield.com/kb.asp?id=Q108340

  • Unable to install CS5.5.2 update

    I am unable to install the CS5.5.2 update for premiere pro. The updater shows two updates available, and wierdly both are the same update CS5.5.2 for premiere pro. If I proceed to install them, it prompts for my admin user password on my mac. When I give the right password, it repeatedly keeps prompting me for password despite entering the right password again and again.
    I am running this on latest macbook pro with OSX Lion. I have no clue what to do?

    Firewall and/or Antivirus may cause problems with the automatic updates... so download the files manually and do the update
    All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/
    Also, Mac and Root User http://forums.adobe.com/thread/879931?tstart=0

  • Am unable to install JRE version 6 update 27

    Am trying to install a new version of Ubuntu on desktop. Have read that I should install Java first. Am unable to install Java Runtime Environment version 6 update 27. Do I need Java Script in order to install? Currently seem to have no version of Java on computer.

    Hi PJA01,
    I'm sorry that you experienced technical issues.
    In order to better understand the cause of the problem, could you please provide me with following information?
    1. Can you tell me a little about your network connection?  For example, are you connected from home using your internet service provider, at work using work network, or at home connected through VPN?
    2. Does your connection go through proxy server? 
    3. Are you using some kind of firewall?  Is it personal or corporate firewall?
    4. OS that you are using
    5. Browser and browser version you are using.
    Thank you,
    -Yuko C
    Adobe Systems Inc.

  • Unable to install Mountain lion after defense grade erase

    Hello All,
    I just sold my 13-inc macbook pro on eBay. As I am paranoid about my privacy, I decided to do a "defense-grade" erase. It took 10 hours after doing a 7 pass process. However, I am unable to install anything on it (Mountain Lion, Lion, Ubuntu). When I try to install Mac OSX I get the error, "Error installing OS X, try reinstalling".  Huh??
    Please let me know what I should do. Can I not install anymore? Should I get a new one?
    Thanks,
    Singlebinary
    Message was edited by: singlebinary

    Here's what I did:
    Plugged in my USB drive and started the computer with the option key pressed. I get one choice "Install OS X" which is from my USB drive. After I got an error message, I can cancelled it and under tools selected "Disk Utility". I then selected one partition and the default P table of GUID. So, this has already been done to the drive.
    There is no option to select "Reinstall Mac OS X". All I have is the following:
    OS X Installer, File, Edit, Utilities, Window.
    Under Utilities, I have Disk Utility, Terminal, Network, Restore from Time Machine. I do not have a time machine backup so that does not work either.
    Looking at the Installer Log errors, I find the following lines:
    OS X Installer application started
    1 display(s) found.
    @(#) PROGRAM: Install PROJECT:Install-729
    @(#) PROGRAM: OS X Installer PROJECT:OSInstaller-419
    Harware: MacbookPro8,1 @ 2.40 GHz (x4), 8192 MB RAM
    Running OS Build: Mac OS X 10.8
    Failed to locate volume with UUID AA4A097D-B85A-37FF-A0A6-8EB66DAEC942
    Couldn't find OS X (server) install data.
    2013-03-31 07:24:05.685 OS X Installer[317:707] *** WARNING: -- [NSImage CompositeToPoint:fromRect:operation:] is deprecated in MACOSX 10.8 and later. Please use - [NSImage drawAtPoint:fromRect:operation:fraction:] instead
    Thanks,
    Singlebinary

  • HT4993 I am unable to send text imessages after update on 4S...please help and thank you.  They just sit there in the sending mode.

    I am unable to send text messages after the update.  They just sit there in "sending" mode.  Thank you.

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Maybe you are looking for