Unable to install on vista

I tried to update my i phone and when I did it gave me a error saying to plug into itunes, then itunes said iphone needs to restore but is unable.
I then tried upgrading to itunes 9.0 but after downloading warning "unknown publisher" came up. I acceted the signature but still no repsonse.

Hello Kisai!
We tested installation on Vista, of course and many other
users are currently using the toolkit on Vista. I'll see if I can
figure out your error, but I may need more info. We should have a
new build posted in the next day or two, but I'm not sure if that
will solve your problem because we are using the same installer
technology. When we post the new version, please try it out and
follow up.
thanks!

Similar Messages

Unable to Install on Vista 64 SP1

Hello Adobe
I do not see any information on trying to install the AIF
Toolkit on Vista. I've tried to install it a few different times
and I get "Setup has encournted an error and cannot continue.
Contact Adobe Customer Support for assistance. Internal Error 2739"
each time. Is there a newer version of the AIF Toolkit somewhere?
This version appears to have been packaged on 9/21/2007
(I will note that the Adobe Acrobat Reader also has major
issues and will not install either, but that's not the AIF
toolkit)

Hello Kisai!
We tested installation on Vista, of course and many other
users are currently using the toolkit on Vista. I'll see if I can
figure out your error, but I may need more info. We should have a
new build posted in the next day or two, but I'm not sure if that
will solve your problem because we are using the same installer
technology. When we post the new version, please try it out and
follow up.
thanks!

Bought new Audigy SE, unable to install new Vista Driv

I just bought and installed a new Audigy SE, immediatelly after turn on the computer via Windows Update download and installed the drivers and that worked fine with playback but the mic sounds in very low, I even tried to manually edit the mic boost registry but still the mic is practically useless. These are the drivers:?[img"]http://img.photobucket.com/albums/v385/javiersf/AudigyDrivers.jpg">?Another trouble: At the same time Windows Updated downloaded the Audigy Vista, I downloaded the new Audigy drivers for Vista posted on June 25th, but when I try to install them I receive this error message:[img"]http://img.photobucket.com/albums/v385/javiersf/ErrorVistaDrivers.jpg">?I even restored my system just before the windows update driver was downloaded and installed but?still I receive this error. I tried to manually delete the drivers, uninstall the audio card and the restore it, but still I am getting this error and I'd like to take advantage of this driver and software to see if that will fix the problem with the low power mic.

@javiersf; if I were you, I would give back that soundcard back and wait further for some support from Creative. 'cos , there is not a good support for Audigy users, especially for "LS/SE/Value" users; I don't recommend that card to anyone.
BTW, there is not a driver for Mic Boost, since the first Vista driver released. You should find an alternati've way (like using mic from Onboard sound card) or you have to use your mic like it's now.

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

I am still unable to install itunes in Windows Vista

I have tried to run Fix it 4 times now after doing other things suggested in the Apple community and I am still unable to install itunes. Do you have any other ideas?
I've been uninstalling/reinstalling and using CCcleaner, sfcscannow and nothing seems to correct error msg 2- corrupt files found/unable to fix. Now what??????
I am using windows Vista. I NEED help!

nothing seems to correct error msg 2
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Unable to install JDK 6 on Windows Vista

Hi
I am unable to install jdk 6 (jdk-6u4-windows-x64)on windows vista. I am getting error at installing time and it will terminate process.
Can any one help me!
Thanks in advance
Dave

Not without exact problem information.
Read the Installation Instructions (at where you gor Java.)

Unable to install Vista OR XP (SP2)

Any help is appreciated here.
I've been running this Imac for months with dual boot via boot camp and have had no issues. Suddenly, last week, Vista will not boot. Missing file boot/bcd error
Due to my frustration, I figured I'd wipe Vista and reinstall (I use windows for gaming only).
I deleted that partition, created a new one and since have been unable to install Vista OR XP (which I tried as an alternative). I can create a 90 GB partition and Vista begins to install but it sees ONLY my Macintosh HD as a whole and can't see the partition. XP on the other hand can see the partition and installs but very slowly. The installed result is too slow for web browsing in fact.
This tells me that something is going on with the boot sector possibly in the files under bootcamp that allow you do choose the OS at startup.
So I then booted to my OSX install disk and did an install and archive thinking I would get a fresh copy of OSX and clean out any offending files. This proved to be the same result.
Does anyone have any ideas that may help? I would prefer not to wipe the HDD and begin from scratch as that means recreating profiles and importing photos, music and bookmarks for 4 users in the family on Leopard.
Thoughts?

I was able to recreate all the issues using both XP and Vista install discs this evening for tech support.
Next steps after several this evening will be the following:
1. Run the OSX Utilities from the OSX Install disc
2. reformat the entire hard drive (low level format)
3. Clean install of OSX
4. Run all updates
5. Install Vista with Boot camp
If that all works, I'll restore the MacHD from time machine.
If anyone has any other suggestions as well, I'd welcome them!

Unable to install CS3 Web Premium on Vista

I recently purchased CS3 Web Premium. When I try to install it, it fails. The message I get is - Error 1310.Error writing to file
C:\Config.Msi\43361.rbf. Verify that you have access to that directory.
I am running on Vista Home Premium - Service Pack 1.
I turned off User Account Control and I have reset the ownership and permissions for the ProgramData folder as directed in the forum.
Still can't load the software. One thing I find strange about this message is that I don't have a Config.Msi folder. I even tried creating one but that didn't help either.
Please help!

I still have not been able to get this resolved completely. However, I have been able to get the error 1013 from popping up.
I had originally started off doing these steps from Adobe's site : http://kb2.adobe.com/cps/401/kb401528.html however I had no luck with any of the 3 solutions. I then found this link : http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/ and this seemed to have taken the error 1013 from popping up.
However, now when I go to intall it...it will run through the whole installation process which takes 30 mins!!! To only tell me that all the programs were unable to install and to finish. I thought I was getting somewhere with this and then another road block. I can't believe I've now spent 2 days on this going on three.
I also had downloaded some scan program that states they can get Adobe Software installed and take away the errors by cleaning my system. Wait I'm confused here because my system is BRAND NEW. This program also cost like 40 bucks. I had contacted them wondering how on earth they can claim such a thing on a brand new computer...and that there "scan" had shown my brand new laptop with thousands of errors!!! ???? !!!! They only answered that I needed to buy their software to find out...obviously skipping that option.
So this is my last solution to try to fix the problem...I'm running it right now with like 12 games up and running so we'll see if Speed is the problem. here's the link on that topic. http://www.ask.com/bar?q=C%3A\Config.Msi&page=1&qsrc=2417&ab=2&u=http%3A%2F%2Fwww.vistax64 .com%2Fvista-general%2F187289-c-config-msi-problem.html
Last resort will to call support but after reading all the forums I'm dreading the sound of it...someone had spent 6 hours on the phone with not results only to have NO working programs instead of the pre-version they had in working order. Also I'm not sure that I'll be getting any help...it sounds that you need the most recent version.
If this does not work...I'm seriously considering sending back my brand new laptop back in that it was the ONLY reason why I bought the thing was to be able to work while I was away from home. Apparently, I won't be able to do so...or buy a whole new program or license which to me sound rediculous in that I've spent just like everyone else on here the amount for the software and was told that I could have it installed on two computers as long as they were not being used at the same time. Understood but not seem to be working out that way.

Unable to install vista sp2

I have tried all update tools and still unable to install SP2.

What happens when you try?
Learn how to install Windows Vista Service Pack 2 (SP2)
Might also ask them over here.
Windows Vista Update forum
on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Unable to Install Universal Wireless Keyboard with the CD that came with the Palm Tungsten E2 on my Windows Vista OS. Can some help? Would Appreciate it very much.

I recently bought a Palm Tungsten E2. I have been unable to install the Universal Wireless Keyboard software that came with the E2. Went online and downloaded the version 1.13 UWK and that would not install either. What did I do wrong?
Post relates to: Tungsten E2

For Vista that version will not let you install programs. Good news though is we have a version you can. Go here, http://www.palm.com/us/support/downloads/windesk62.html and install this on top of the version you already have. There is going to be a few changes on the desktop, there is no quick install, but the install tool.
Once you have that done just double click on keyboard and it will ask you your hotsync name and sync and your done.
Oh as a side note the check if this is your solution is only if the answer solves your original question.
Message back if you have more question or need more help
Post relates to: Palm Z22

"Unable to install the GEAR driver set." in Vista Premium solution!

If you're getting the "Unable to install the GEAR driver set." error, go into regedit, navigate to HKEYLOCALMACHINESYSTEMCurrentControlSetServicesGearAspiWDM and delete the DeleteFlag key. Run the iTunes upgrade/setup package and iTunes should install correctly.
If you get an error about explorer.exe being open, use the Tasks section of Task Manager to stop the explorer.exe application.

Is this 64 or 32 bit Vista?

Unable to install SQL server 2000 and 2005 on Satellite A205-s5831

Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response me

Hi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software

I'm unable to install I Tunes. I get a message "the feature you are trying to use is on a network resource that is unavailble". How do I solve this?

I'm unable to install I Tunes. I get a message "the feature you are trying to use is on a network resource that is unavailble". How do I solve this? Thanks.

I am having the same issue for itunes.msi (iPhone 4S and Windows XP)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Unable to install C4500 HP printer on Windows 7

unable to install C4500 HP printer on Windows 7 - printer installation disc only supported by xp and vista. What do I need to do??
This question was solved.
View Solution.

Hi,
You may download the Windows7 compatible software below:
http://ftp.hp.com/pub/softlib/software11/COL30130/mp-74912-1/PS_AIO_04_C4500_USW_Full_Win_WW_130_140...
Make sure the USB cable is unplug before performing the installation.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to Install Adobe IllustratorCS4 Trial Version

My computer is an HP Pavilion a6300f
Running Windows Vista SP1 Home Premium 32-bit
RAM: 2GB
Processor: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
I am unable to install Adobe Illustrator CS4 Trial Version. I receive a Windows Error that stops the installation. Below are the details of the problem information it generated.
Problem Event Name: APPCRASH
Application Name: Setup.exe_Adobe Setup
Application Version: 2.0.133.0
Application Timestamp: 48a9b01e
Fault Module Name: agcutils.dll
Fault Module Version: 1.0.0.1
Fault Module Timestamp: 48dbd973
Exception Code: c0000005
Exception Offset: 000038d7
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 4b2f
Additional Information 2: 71e63d375deadcbec910c354d49e5870
Additional Information 3: 2439
Additional Information 4: af368e2bdccf20d5b910f6766b93ddcb
Extra information about the problem
Bucket ID: 974576742
I have tried installing it in the simplifed mode, with my firewall AND virus turned off, contacting Adobe, HP and Microsoft for support but nothing works. also tried the Adobe Support Advisor, but I can't even get it to run. If anyone has any help, I would appreciate it.
You can e-mail me personally at [email protected]
Thank you.

Ben,
I don't have Webshots installed. I have ran my AdAware and Spybot, and my Norton's Antivirus. I've also defragged and ran disk cleanup on my C drive. I've ran the Malicious Software Removal from Microsoft, and ran Disk Error Checking. I've done everything I can think of, and I still can't install either one.
I was thinking it was Windows Vista, but surely CS4 is compatible with Windows Vista. I thought maybe it might be the Service Pack 1 and thought about uninstalling that update, trying to install them, then reinstall Service Pack 1. What do you think? Think it might help?

Unable to install on vista

Similar Messages

Maybe you are looking for