Unable to install Oracle 10.2.0.1 Companion CD on Linux on Power

I have been unsuccessful in trying to install the 10.2.01 Companion CD (to install HTMLDB and HTTP server) on a new RHEL 4.5 Linux on Power. Please tell me what I am missing...
- Downloaded Oracle Database 10g Companion CD Release 2 (10.2.0.1.0) for Linux PowerPC (10201_companion_lin_ppc.cpio) ...finally got the right version of the companion CD!
Followed the documentation in the oracle Database Companion CD quick Installation guide 10g release 2 for Linux on POWER (#B25152-01)
Also looked at the Metalink 317085.1 (Don't think that this applies since it's for Linux X86 systems)
When I issue the command runInstaller I get the following:
Exception java.lang.ExceptionInInitializerError occurred..
java.lang.ExceptionInInitializerError
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:1
75)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java:180)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvi
ronment.java:91)
at java.awt.Window.init(Window.java:268)
at java.awt.Window.<init>(Window.java:312)
at java.awt.Frame.<init>(Frame.java:431)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmMainFrame.<init>(OiifmMainFrame.java:304)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(Oiif
mGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceMan
ager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManage
r(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstalle
r.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:
926)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Caused by: java.lang.NullPointerException
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:2159)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1994)
at java.lang.Runtime.loadLibrary0(Runtime.java:824)
at java.lang.System.loadLibrary(System.java:908)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:76)
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java:287
at sun.awt.font.NativeFontWrapper.<clinit>(NativeFontWrapper.java:68)
... 17 more
Exception in thread "main" java.lang.NoClassDefFoundError: sun/awt/X11GraphicsEn
vironment
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java:180)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvi
ronment.java:91)
at java.awt.Window.init(Window.java:268)
at java.awt.Window.<init>(Window.java:312)
at java.awt.Frame.<init>(Frame.java:431)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmMainFrame.<init>(OiifmMainFrame.jav
a:304)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(Oiif
mGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceMan
ager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManage
r(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:
984)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Here are the outputs from the pre-reqs:
#grep MemTotal /proc/meminfo
MemTotal: 498068 kB
]# grep SwapTotal /proc/meminfo
SwapTotal: 1915792 kB
#df -k /tmp
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
45347888 2888692 40155608 7% /
# cat /proc/cpuinfo
processor : 0
cpu : POWER5 (gs)
clock : 1648.350000MHz
revision : 3.1
processor : 1
cpu : POWER5 (gs)
clock : 1648.350000MHz
revision : 3.1
timebase : 512371000
machine : CHRP IBM,9131-52A
#rpm -qa | grep kernel
kernel-2.6.9-55.EL
kernel-utils-2.4-13.1.99
Downloaded the XLC++ packages from IBM as recommended...
What the heck am I missing...... (frustrated since it's taken me 5 days to try and figure this out...I am sure it's simple and staring me in the face, but I can't see it) Thanks in advance for helping.

Was able to resolve the issue by downloading the 32-bit version of JAVA's SDK from IBM and issue the runInstaller command pointing to this location of java's jre:
1. Install IBM Java 1.4.2 32-bit :
IBMJava2-142-ppc32-SDK-1.4.2-1.0 or higher (IBMJava2-142-ppc32-JRE-1.4.2-4)
From: http://www-128.ibm.com/developerworks/java/jdk/linux140/older_download.html
2. Run the installer with -jreLoc pointing to the location where Java 32-bit is installed. % /products/Disk1/runInstaller -jreLoc /opt/IBMJava2-ppc32-142/jre

Similar Messages

Unable to install Oracle 9.0.1 on Linux RedHat

Hi,
I am unable to install Oracle 9.0.1 on Linux RedHat, tried many times. While installing i get following errors-
"Error in invoking target install of makefile
/usr/oracle/9.0.1/plsql/lib/ins-plsql.mk"
"error in invoking target ioracle of makefile
/usr/oracle/9.0.1/rdbms/lib/ins-rdbms.mk"
"Error loading native library : libnjni.so"
Installation halts while configuring Net Confugration Assistant....
Any workaround ???
Thanks in advance.

There are many versions of RedHat. Your post indicates you are using one of them, but your post really does not give a hint as to which one. Funny thing is - different versions have different install requirements.
I really don't understand why operating system version is such a big secret. Especially since it is logically so critical to installation issue. Even when installing on Windows, the first questions is 'which Windows'.
You have, of course, followed the suggestions at http://www.puschitz.com and noted the errors and workarounds, have you not.
Especially about things like packages and versions.

Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0

Hi all,
I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
Here's the actual (make failure) log entry:
gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
Richard Foley
ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
*** End of Installation Page***
The installation of Oracle Developer Suite 10g was successful.
Edited by: orafoley on Oct 14, 2008 5:19 PM

Hi Hub,
Done that, nothing:
$> env | grep -i LD
$>
On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
Oracle 10.2.01
Oracle Developer Suite 10i (ODS 10.12.02)
SuSe 11.0
Now when I runInstaller I get this, which is surprisingly similar:
Start output from spawned process:
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
/usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
-lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
Richard.

Unable to install oracle 9i (64) on server 2003 (64)

unable to install oracle 9i (64) on server 2003 (64) :
" setup is valid but to enother type machine"
(proc INTEL XEOM)

I have downloaded this version:
http://www.oracle.com/technology/software/products/oracle9i/htdocs/win64soft.html
Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition
for Windows XP 2003/Windows Server 2003 (64-bit)
There is nothin to read about "just for itanium". Pls can u give me a link (or metalink ID) where u got your informations? Is it possible to run 9i 32bit on Win2k3 Enterprise 64bit?

Difficulty installing Oracle 8i 8.1.1.6 on Redhat Linux 7

Hi,
I am having difficulty installing Oracle 8i 8.1.1.6 on Redhat Linux 7. The installation process runs well and the last stage when the Database Configuration Assistant is running. It successfully copies the database files but when it reaches 80% (Initisialing database) it freezes and does not go any further. Does anybody know what good be going wrong here.
Regards
Richard Wooding

Please refer to my posting SIGSEV received at bfffdbe0. It also directs you to other helpful postings.
null

Installing Oracle 9i (version 9.0.1) on RedHat Linux 7.2

Hi All,
I've been trying to install Oracle 9i version 9.0.1 on RedHat
Linux 7.2 with kernel 2.4.7-10. This RH 7.2 is running on my
Compaq Armada M700 laptop that has 800MHz CPU and 256MB of RAM.
I have 10GB of diskspace on this laptop.
Someone in this group posted a howto on how to install Oracle 9i
on RedHat Linux 7.2 but for some reasons, Oracle Universal Installer
still hangs at 74% of the installation. Here is what I did:
1) Install RH 7.2 on the laptop. I also make sure that make, ar,
ld, nm and C for unix got installed when I installed RH 7.2.
I also verify by using the command "which make", "which ar",
"which ld" and "which nm" and they are also in the /usr/bin
directory. I also make the /tmp partition to be 800MB and
the swap file to be 500MB,
2) Modify the /etc/hosts file. This part is easy. I can ping
both the hostname, FQDN and the IP address of the laptop from
both locally and remotely (tested with SSH connection),
3) Go to blackdown.org and download jdk118_v3
4) Uncompress and put it in the /usr/local/jdk118_v3 directory,
5) Make a softlink ln -s /usr/local/jdk118_v3 /usr/local/java
6) Download and install package:
rpm -Uvh force nodeps binutils-2.10.0.18-1.i386.rpm
7) In /proc/sys/kernel/sem file, I modify the third column from 32 to 128,
8) Download and install package:
rpm -Uvh force nodeps binutils-2.11.90.0.8-9.i386.rpm
9) Download Linux9i_Disk1.cpio, Linux9i_Disk2.cpio and Linux9i_Disk1.cpio
to my laptop hard-drive,
10)Run cpio -idmv < Linux9i_Disk1.cpio (for 2 and 3 well),
11)Create a user account "oracle". This "oracle" account belongs to
group "oracle". Furthermore, I also create a directory /oracle
and change the owner and group permission to account "oracle"
12)Start the installer ( as Oracle User ) by typing ./runinstaller
13)The installer will ask you to run a started script as root ,
you may open a shell and type su then open Nautilus (
if using Gnome or File manager as super user if using KDE )
and drag the noted file to the shell screen and press enter,
after it is ended continue with the installer (done),
14)It asked to supply JDK home directory then it is /usr/local/java (done)
15)Unix group Name ( to update Oracle software ) : (I leave blank here)
16)Oracle home is : /oracle/9.0.1
/oracle/orainventory
From what the poster said, it should work; however, it did NOT work
for me. I've tried and tried but no avail. I have plenty of disk
space so I don't think space is an issue here.
Please help.
David Tran

Hi All,
I've been trying to install Oracle 9i version 9.0.1 on RedHat
Linux 7.2 with kernel 2.4.7-10. This RH 7.2 is running on my
Compaq Armada M700 laptop that has 800MHz CPU and 256MB of RAM.
I have 10GB of diskspace on this laptop.
Someone in this group posted a howto on how to install Oracle 9i
on RedHat Linux 7.2 but for some reasons, Oracle Universal Installer
still hangs at 74% of the installation. Here is what I did:
1) Install RH 7.2 on the laptop. I also make sure that make, ar,
ld, nm and C for unix got installed when I installed RH 7.2.
I also verify by using the command "which make", "which ar",
"which ld" and "which nm" and they are also in the /usr/bin
directory. I also make the /tmp partition to be 800MB and
the swap file to be 500MB,
2) Modify the /etc/hosts file. This part is easy. I can ping
both the hostname, FQDN and the IP address of the laptop from
both locally and remotely (tested with SSH connection),
3) Go to blackdown.org and download jdk118_v3
4) Uncompress and put it in the /usr/local/jdk118_v3 directory,
5) Make a softlink ln -s /usr/local/jdk118_v3 /usr/local/java
6) Download and install package:
rpm -Uvh force nodeps binutils-2.10.0.18-1.i386.rpm
7) In /proc/sys/kernel/sem file, I modify the third column from 32 to 128,
8) Download and install package:
rpm -Uvh force nodeps binutils-2.11.90.0.8-9.i386.rpm
9) Download Linux9i_Disk1.cpio, Linux9i_Disk2.cpio and Linux9i_Disk1.cpio
to my laptop hard-drive,
10)Run cpio -idmv < Linux9i_Disk1.cpio (for 2 and 3 well),
11)Create a user account "oracle". This "oracle" account belongs to
group "oracle". Furthermore, I also create a directory /oracle
and change the owner and group permission to account "oracle"
12)Start the installer ( as Oracle User ) by typing ./runinstaller
13)The installer will ask you to run a started script as root ,
you may open a shell and type su then open Nautilus (
if using Gnome or File manager as super user if using KDE )
and drag the noted file to the shell screen and press enter,
after it is ended continue with the installer (done),
14)It asked to supply JDK home directory then it is /usr/local/java (done)
15)Unix group Name ( to update Oracle software ) : (I leave blank here)
16)Oracle home is : /oracle/9.0.1
/oracle/orainventory
From what the poster said, it should work; however, it did NOT work
for me. I've tried and tried but no avail. I have plenty of disk
space so I don't think space is an issue here.
Please help.
David Tran

Installing oracle 10g and 11g client on the same Linux RHEL 5.4 host

Is it possible to install Oracle 10g and 11g client on the same Linux RHEL 5.4 host and have the application switch between 10g and 11g? and how would the 10g and 11g be installed?

Thanks for your reply.
Typeically if 10g is installed in /home/roacle/product/10.2.0, are you saying that for 11g, it would be /home/oracle/product/11.0.0 ?
How about switching the application? Does changing the ORACLE_HOME and PATH environment variable setting enough ? Let's say from
ORACLE_HOME=/home/oracle/product/10.2.0/client_1 to /home/oracle/product/11.0.0/client_1

Install Oracle Application Server 10g(10.1.2) on Linux (AS 4.0)

Hi all,
I am trying to install Oracle Application Server Form and Report Services on Linux (Application Server 4.0).
Following the user manual (B19314-02 ), but I don't know how to download and update Red Hat Enterprise Linux AS release 4 (Update 1) and requirement packages as: glibc-2.3.4-2.9
glibc-common-2.3.4-2.9
binutils-2.15.92.0.2-13
compat-libstdc++-296-2.96-132.7.2
gcc-3.4.3-22.1
gcc-c++-3.4.3-22.1
libstdc++-3.4.3-22.1
libstdc++-devel-3.4.3-22.1
openmotif21-2.1.30-11.RHEL4.4
pdksh-5.2.14-30
setarch-1.6-1
make-3.80-5
gnome-libs-1.4.1.2.90-44.1
sysstat-5.0.5-1
compat-db-4.1.25-9
control-center-2.8.0-12
xscreensaver-4.18-5.rhel4.2
Please show me!
Thanks.

Hi all,
I tried to download requirement packages:
glibc-common-2.3.4-2.9
binutils-2.15.92.0.2-13
compat-libstdc++-296-2.96-132.7.2
gcc-3.4.3-22.1
gcc-c++-3.4.3-22.1
libstdc++-3.4.3-22.1
libstdc++-devel-3.4.3-22.1
openmotif21-2.1.30-11.RHEL4.4
pdksh-5.2.14-30
setarch-1.6-1
make-3.80-5
gnome-libs-1.4.1.2.90-44.1
sysstat-5.0.5-1
compat-db-4.1.25-9
control-center-2.8.0-12
xscreensaver-4.18-5.rhel4.2
from ftp://ftp.redhat.com/pub/redhat/linux/enterprise/4/en/os/i386/SRPMS/
But when I installed packages, it was not successfull:
# rpm -Uvh gcc-3.4.3-22.1.src.rpm
warning: gcc-3.4.3-22.1.src.rpm: V3 DSA signature: NOKEY, key ID db42a60e
1:gcc ########################################### [100%]
# rpm -q gcc-3.4.3-22.1.srcpackage gcc-3.4.3-22.1.src is not installed
Please help me!

Unable to install oracle 10g XE in windows 7

previously i had installed oracle 10g.but it stopped working.
so I tried to resolv it by uninstalling it.
I uninstalled it from control panel.
but now i am unable to install it again
it showing an error-
The install cannot proceed as service OracleServiceXE is present on the system.
Remove the sevice,reboot the system and retry the installation.
I have tried reboot the system so many times after uninstall also.
please give me a solution for this.

938561 wrote:
previously i had installed oracle 10g.but it stopped working.
so I tried to resolv it by uninstalling it.
I uninstalled it from control panel.
but now i am unable to install it again
it showing an error-
The install cannot proceed as service OracleServiceXE is present on the system.
Remove the sevice,reboot the system and retry the installation.
I have tried reboot the system so many times after uninstall also.
please give me a solution for this.FORMAT C:\

Unable to Install oracle 10g R2 on RHEL5 with 64 bit

Hi,
Operating Systm:LINUX(RHEL 5 64 bit)
When we are trying to run ./runInsatller we are getting the below error .And it is not displaying any ORACLE GUI to install
[oracle@virqtsXora01 ~]$ cd database/
[oracle@virqtsXora01 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-03-06_01-35-08AM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                      % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:         $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
        echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
        echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
        % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@virqtsXora01 database]$ DISPLAY=192.168.7.93; export DISPLAY
[oracle@virqtsXora01 database]$ neat
-bash: neat: command not found
[oracle@virqtsXora01 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-03-06_01-35-39AM. Please wait ...[oracle@virqtsXora01 database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-03-06_01-35-39AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary0(Unknown Source)
        at java.lang.ClassLoader.loadLibrary(Unknown Source)
        at java.lang.Runtime.loadLibrary0(Unknown Source)
        at java.lang.System.loadLibrary(Unknown Source)
        at sun.security.action.LoadLibraryAction.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
        at sun.awt.DebugHelper.<clinit>(Unknown Source)
        at java.awt.Component.<clinit>(Unknown Source)Please help me how to solve the problem.
Thanks & Regards,
Poorna Prasad.S

SIDDABATHUNI wrote:
Hi,
Here we are trying to install oracle S/W through nx client .
I am unable to get the GUI of oracle Installer after following your steps.
[oracle@virqts1appdev001 ~]$ ssh 192.168.7.93
[email protected]'s password:
Ok, you are starting an ssh session to a server at 192.168.7.93.
What is the IP address of the machine from which you are starting the ssh session?
Last login: Sun Mar 6 01:54:25 2011 from 192.168.5.16
[oracle@virqtsXora01 ~]$ xhost +
xhost: unable to open display ""
[oracle@virqtsXora01 ~]$ DISPLAY=192.168.7.93:0.0; export DISPLAY192.168.7.93 is the IP address of the machine that you are connected TO, the ip address of the machine that will be executing the installer.
What is the IP address of the client from which you started the ssh session ... the machine that you are sitting at and expecting to see output? It is the IP address of that machine that you need to set in your DISPLAY variable. That tells the remote machine to redirect display output to the IP address specified by the DISPLAY variable.
And then, to receive that redirected output, you need to start an x-server on that machine. x-ming in one popular, free x-server.
[oracle@virqtsXora01 ~]$ cd database/
[oracle@virqtsXora01 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLin
ux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-03-06_02
-18-39AM. Please wait ...[oracle@virqtsXora01 database]$ Exception in thread "ma
in" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-03-06_02-18-39AM/jre/1.4
.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file
or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Thanks & Regards,
Poorna Prasad.S

Unable to install Oracle Provider for OLE DB 8.1.6

I could not install Oracle Provider for OLE DB 8.1.6. The problem was when I double click on the Setup.exe to run setup, it would not execute on some computers (brand new computers) and worked fine on others. I often got an error message saying that the Java Run-time Environment was not found. Has anyone run into that problem. I greatly appreciate if you could help.

Found the post below on another thread. This would not work for us without changing the JRE_MEMORY_OPTIONS as well.
========================================================
One of our DBAs had the answer. Its a bug relating to p4 processors.
1. Rename the file symcjit.dll to symcjit.old
2. Change the following line in the "oraparam.ini" file to read:
JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m
They said someone found it in Oracle KB article 131299.1 but I have still been unable to find the Oracle KB. Perhaps a "Knowledge Base" link should be added to the support or resources section.

Unable to install Oracle Provider for OLEDB 8.1.6

I was trying to install Oracle Provider for OLEDB 8.1.6 but was not able to do so because the java run-time environment could not be found. I have tried to install it on different computers, it worked on some and not on others. The computers I have tried all had windows 2000 or NT 4.0. I greatly appreciate if you could help.

Found the post below on another thread. This would not work for us without changing the JRE_MEMORY_OPTIONS as well.
========================================================
One of our DBAs had the answer. Its a bug relating to p4 processors.
1. Rename the file symcjit.dll to symcjit.old
2. Change the following line in the "oraparam.ini" file to read:
JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m
They said someone found it in Oracle KB article 131299.1 but I have still been unable to find the Oracle KB. Perhaps a "Knowledge Base" link should be added to the support or resources section.

Unable to install Oracle 8i Personal Edition in Windows98 with Pentium4

I am getting error "Performed illegal Operation" when ever I
unzip and install Oracle 8i PE 8.1.7 for windows98. Error is
JREW caused an invalid page fault in module JAVAI.DLL,
suggestions was install new JRE Version. I have tried to format
hard drive (twice) thinking some software incompatibility, no
go. remove devices, no go. After further analysis it seems there
is issue installing 8i databse Personal Ed. in Pentium 4
processor with an Intel motherboard latest Bios. I have
downloaded and installed JRE Version 1.1.8_008, still no go.
What am i missing? Please advice or suggestion. Thank you. Email
me- [email protected]

I am unable to install 8i personal edition Release 3 onto my W2K machine. I download the zip file and unzip it into (c:/OracleInstall) a folder I have created on my c:/ drive. When i click on the setup.exe file it opens up. When I click on the install button the GUI disappers and nothing occurs. I have attempted to burn it onto a CD_Rom and install through the control panel and the same occurs.
I am not sure what is causing this problem. Is there any why I could request the software in a CD as opposed to a zip file? What could be causing this problem? Is the machine a P4? there is a known problem
I don't know about his machine, but mine is a P4. Where do I find this information about this problem? And is there a fix? I need to install the NET8 Assistant.

Unable to install Oracle VM 3.0.2 to an iSCSI disk

Dear users,
I am trying to install Oracle VM 3.0.2 Server on an iSCSI disk without luck. Every time that i try it, console (alt+f4) shows me this error:
"connection1:0: Could not create connection due to crc32c loading error. Make sure the crc32 module is built as a module or into the kernel"
"session1: couldn't create a new connection"
"Connection1:0 to [target iqn........, portal: 1.1.1.1,3260] through [iface: default] is shutdown.
Seeing console alt+f3 appears:
"iSCSI initiator name iqn......"
"iSCSI startup"
It seems like anaconda installer doesn't sees ip address configuration. I have tried to pass "asknetwork" option when I launch setup, but anaconda never demands network configruation. After that I have configured ethernet device on console alt+f2. Maybe is this the problem or is not possible to install Oracle VM 3.0.2 on an iSCSI disk??
Thanks.

Just to let you know that I actually have an SR open with Oracle about this.
I managed to track down that the problem is due to OVM 3's inability to read iBFT (iSCSI Boot Firmware Table) during install.
This was also the case with OVM 2.x - but as Oracle Linux 5.x boots via iSCSI fine via IBFT (we have OVM 3 Manager running OL6 booting from SAN fine) - we stupidly assumed that with OVM3 - being based on a newer kernel, the iBFT stuff would just work.
It didn't!
The only iSCSI booting Oracle support currently is via a full blown HBA. To clarify this is not one of those new NICs with an embedded iSCSI initiator in the ROM - we're talking about an uber expensive HBA that can load the entire iSCSI stack and presents your iSCSI LUN as a local disk.
My SR is now over a month old and unfortunately there has been very little progress made with it.
But when it comes I will be sure to post it here.....
I'm really surprised more people haven't asked for this functionality. Seems a bit of a no brainer....
Cheers,
Jeff

Unable to install Oracle XE Client on Ubuntu 8.04 - "no such user"

Hi,
I've just installed Oracle XE client on my desktop machine (64bit Ubuntu 8.04), and I had to manually create some users and groups:
sudo groupadd nobody
sudo groupadd oinstall
sudo useradd -s /bin/bash -g oinstall -G dba oracle
sudo passwd oracle
before the install would complete, due to what appears to be incorrect arguments to useradd by the installer.
It took quite a lot of hunting to find the above, and I'm a little concerned since no one else seems to have had the same problems.
I installed using:
$ sudo dpkg -i --force-architecture oracle-xe-client_10.2.0.1-1.0_i386.deb
(the force-architecture was required for the server install on my server, so I did the same here)
I read the install instructions on the oracle pages
(http://www.oracle.com/technology/software/products/database/xe/files/install.102/b25144/toc.htm#BABFEDEI) and didn't see anything about having to manually create these accounts, and I seem to have followed the rest of the instructions correctly.
What did I do wrong? I'm probably going to have to do it again sometime, and I'm a little concerned that I might have just been causing trouble for myself by doing those extra manual steps.
Note that I had to provide a password for the oracle user; how does oracle manage to log in using this account, since I didn't have to provide it anywhere?
Any help/advice would be appreciated,
many thanks,
William
BTW I'm really not happy with the preview/post message thing in this forum; I'm using Firefox 3.0.1 and if you use preview then the back button clears the entire text (yay, thanks!); I tried to be more cunning next time, and use the back button instead, but then none of the "preview", "post message" and "cancel" buttons work... so this was my third attempt at writing this message, and it's somewhat shorter than the original, like my patience :p

BTW I'm really not happy with the preview/post
message thing in this forum; I'm using Firefox 3.0.1
and if you use preview then the back button clears
the entire text (yay, thanks!); I tried to be more
cunning next time, and use the back button instead,
but then none of the "preview", "post message" and
"cancel" buttons work...It's not Firefox related - same issue with other browsers.
Please put your entry regarding this into this thread:
Preview not working correctly - works now
That's the right place for this issue...
Cheers!

Unable to install Oracle 10.2.0.1 Companion CD on Linux on Power

Similar Messages

Maybe you are looking for