Unable to install oracle 10g
Hi,
I already had my 10g in my windows machine but it not installed properly,so I tryied to unistall and install my oracle 10 g in my machine.
But while trying to uninstall
i not found any unistall exe so i deleted the registered key,and again try to install it,but while installing it throws the error boldplease remove the service and recoot to install bold
so i tried to find sid in cmd using set oracle_sid it shows sid not define
While tried in control panel->administrative tools-->serivces i found 3 services in ora i unable to remove so i put across all the ora services in disabled and i tried even its not working
thanks for ur help
regards
THelak
795950 wrote:
Hi,
I already had my 10g in my windows machine but it not installed properly,so I tryied to unistall and install my oracle 10 g in my machine.
But while trying to uninstall
i not found any unistall exe so i deleted the registered key,and again try to install it,but while installing it throws the error boldplease remove the service and recoot to install bold
so i tried to find sid in cmd using set oracle_sid it shows sid not define
While tried in control panel->administrative tools-->serivces i found 3 services in ora i unable to remove so i put across all the ora services in disabled and i tried even its not working
thanks for ur help
1.) Remove the services as C:\> oradim -delete -sid <db_name>
2.) remove the directory structure
3.) In case if some folder cnaoot deleted then restart the machine and delete them or rename them and delete later on.
Hope this help you :)
--neeraj
Similar Messages
-
Unable to install oracle 10g XE in windows 7
previously i had installed oracle 10g.but it stopped working.
so I tried to resolv it by uninstalling it.
I uninstalled it from control panel.
but now i am unable to install it again
it showing an error-
The install cannot proceed as service OracleServiceXE is present on the system.
Remove the sevice,reboot the system and retry the installation.
I have tried reboot the system so many times after uninstall also.
please give me a solution for this.938561 wrote:
previously i had installed oracle 10g.but it stopped working.
so I tried to resolv it by uninstalling it.
I uninstalled it from control panel.
but now i am unable to install it again
it showing an error-
The install cannot proceed as service OracleServiceXE is present on the system.
Remove the sevice,reboot the system and retry the installation.
I have tried reboot the system so many times after uninstall also.
please give me a solution for this.FORMAT C:\ -
Unable to install Oracle 10g R2 on Windows Vista Business
Specification for my Machine/Laptop- Lenovo SL400
windows 32-bit
Windows Vista Business
Oracle installation fails several times with unknown error.
Is this a compatibiity issues? Do I need to install other drivers or downgrate to Windows XP Professional?
Thanks for your help.
Pankaj Pratim Chanda
Chennai
India
Solved!
Go to Solution.Pankaj
Which version of oracle have you installed?According to the dcoumentation,
Do not install Oracle Database on Windows Vista or Windows Server 2008 using the media for Oracle Database 10g Release 2 (10.2) for Microsoft Windows. Do not use the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista or the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista and Microsoft Windows Server 2008 media to install on operating systems other than Windows Vista or Windows Server 2008.
Oracle Database is supported on Windows Vista with the 10.2.0.3 release. If you used the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista media, then Oracle recommends that you install the 10.2.0.4 patch set. You do not need to use the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista and Microsoft Windows Server 2008 media.
For new installations on Windows Vista or Windows Server 2008, use the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista and Microsoft Windows Server 2008 media. This new software is available in the updated media pack
More information available here
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#CHDFCIAC
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
Unable to Install oracle 10g R2 on RHEL5 with 64 bit
Hi,
Operating Systm:LINUX(RHEL 5 64 bit)
When we are trying to run ./runInsatller we are getting the below error .And it is not displaying any ORACLE GUI to install
[oracle@virqtsXora01 ~]$ cd database/
[oracle@virqtsXora01 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-03-06_01-35-08AM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@virqtsXora01 database]$ DISPLAY=192.168.7.93; export DISPLAY
[oracle@virqtsXora01 database]$ neat
-bash: neat: command not found
[oracle@virqtsXora01 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-03-06_01-35-39AM. Please wait ...[oracle@virqtsXora01 database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-03-06_01-35-39AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)Please help me how to solve the problem.
Thanks & Regards,
Poorna Prasad.SSIDDABATHUNI wrote:
Hi,
Here we are trying to install oracle S/W through nx client .
I am unable to get the GUI of oracle Installer after following your steps.
[oracle@virqts1appdev001 ~]$ ssh 192.168.7.93
[email protected]'s password:
Ok, you are starting an ssh session to a server at 192.168.7.93.
What is the IP address of the machine from which you are starting the ssh session?
Last login: Sun Mar 6 01:54:25 2011 from 192.168.5.16
[oracle@virqtsXora01 ~]$ xhost +
xhost: unable to open display ""
[oracle@virqtsXora01 ~]$ DISPLAY=192.168.7.93:0.0; export DISPLAY192.168.7.93 is the IP address of the machine that you are connected TO, the ip address of the machine that will be executing the installer.
What is the IP address of the client from which you started the ssh session ... the machine that you are sitting at and expecting to see output? It is the IP address of that machine that you need to set in your DISPLAY variable. That tells the remote machine to redirect display output to the IP address specified by the DISPLAY variable.
And then, to receive that redirected output, you need to start an x-server on that machine. x-ming in one popular, free x-server.
[oracle@virqtsXora01 ~]$ cd database/
[oracle@virqtsXora01 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLin
ux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-03-06_02
-18-39AM. Please wait ...[oracle@virqtsXora01 database]$ Exception in thread "ma
in" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-03-06_02-18-39AM/jre/1.4
.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file
or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Thanks & Regards,
Poorna Prasad.S -
PROBLEM IN INSTALLING ORACLE 10G ON WINDOWS 2003 SERVER(WIN2K3)
Hi to all,
I have successfully removed Oracle 9i from win2k3.Am unable to install oracle 10g on the same system.............. problem : Universal installer window stucks at 14%, no error......no resource utilization by installer(as viewed from task manager).
Please help i ve read the oracle installation documentation as well............Ok gotcha !!!!!!!!!!!!! its a CRC error given by java
dats y it stucked :(
am hereby uploading the error:
java.util.zip.ZipException: invalid entry CRC (expected 0xc9e96252 but got 0x5651c9f5)
at java.util.zip.ZipInputStream.readEnd(Unknown Source)
at java.util.zip.ZipInputStream.read(Unknown Source)
at java.io.FilterInputStream.read(Unknown Source)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)
CAN SOMEONE SUGGEST ME WHAT TO DO NOW ???????????plz reply
ANKUR SHARMA -
Error While Installing ORACLE 10g in Redhat Linux 5.0
Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev GeorgeSajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Error while installing oracle 10g grid on windows
hi all,
when i am installing oracle 10g grid i got the error that
"Configuration assistant "OMS Configuration" failed "
when i saw the log
it has been mentioned the failed to create repos user.
this is the out put of the log
[14-02-2008 11:51:55] Enter SYS user's password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Enter repository user password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Enter MetaLink user password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Getting temporary tablespace from database...
[14-02-2008 11:51:55] Found temporary tablespace: TEMP
[14-02-2008 11:51:55] Checking SYS Credentials ...
[14-02-2008 11:51:56] OK.
[14-02-2008 11:51:56] Checking DB Init Parameters ...
[14-02-2008 11:51:56] OK.
[14-02-2008 11:51:56] Checking for Repos User ...
[14-02-2008 11:51:56] Does not Exist.
[14-02-2008 11:51:56] Loading necessary DB objects ...
[14-02-2008 11:51:56] Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ...
[14-02-2008 11:51:56] Done Loading necessary DB objects
[14-02-2008 11:51:56] Creating repos user ...
DECLARE
ERROR at line 1:
ORA-01119: error in creating database file
'E:\oraclegrid\oms10g\oradata\mgmt.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
ORA-06512: at line 44
[14-02-2008 11:51:57] Failed.
[14-02-2008 11:51:57] Repository Creation failed. Failed to create Repos User.
all users and everyone has full permission on this folder, i don't know why it is giving,
please any one help me out i am stuck in the middle of the installation
oracle 10g grid version is 10.1
please reply to this
Regards,
Veeresh Sthis is the output what i get in oui:configuration assistants
Output generated from configuration assistant "OMS Configuration" (attempt 6):
Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Creating OMS Respository is in progress.
Configuration assistant "OMS Configuration" failed
The "E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-------------------------------------------------------------------------------
when i saw this E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands file
the below 2 lines was mentioned in that file.
rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
oracle.sysman.emcp.agent.AgentPlugIn
this below log i got in E:\oraclegrid\agent10g\cfgtoollogs\cfgfw\CfmLogger_2008-02-14_10-28-34-AM.log file
i have pasted last lines of the files.
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 0 have been completed with status=true
INFO: oracle.sysman.top.oms:deployOms:Already deployed, skipped.
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 1 have been completed with status=true
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 2 have been completed with status=true
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log
INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=100 ms
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Enter SYS user's password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Dropping the repository..
Quiescing DB ... Done.
Checking for Repos User ... Does not Exist.
Repos User does not exist ... Continuing with cleanup ...
Dropping Roles/Synonymns/Tablespaces ... Done.
Unquiescing DB ... Done.
Dropped Repository Successfully.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf
INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=200 ms
INFO: oracle.sysman.top.oms:RepManager Create Repository Error = E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf . Please check the log file at 12
'Enter SYS user's password :
Enter repository user password :
Enter MetaLink user password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Failed.
Repository Creation failed. Failed to create Repos User.
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf have completed with exitCode=12
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Enter SYS user's password :
Enter repository user password :
Enter MetaLink user password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Failed.
Repository Creation failed. Failed to create Repos User.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
WARNING: oracle.sysman.top.oms:EmcpPlug:startProcessing:Exception in runner=RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.oms:10.2.0.2.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7} failed with an unhandled exception:
java.lang.Exception: RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
at oracle.sysman.emcp.util.EmcpPlug.startProcessing(EmcpPlug.java:389)
at oracle.sysman.emcp.util.EmcpPlug.invoke(EmcpPlug.java:360)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7}
INFO: Framework waiting for Action to complete at 12:19:41.469
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 12:19:41.469
INFO: Cfm.save() was called
INFO: Cfm.save(): 15 aggregate instances saved
please anyone help, i have given all details, i want to install this grid as soon as possible -
Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0
Hi all,
I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
Here's the actual (make failure) log entry:
gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
Richard Foley
ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
*** End of Installation Page***
The installation of Oracle Developer Suite 10g was successful.
Edited by: orafoley on Oct 14, 2008 5:19 PMHi Hub,
Done that, nothing:
$> env | grep -i LD
$>
On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
Oracle 10.2.01
Oracle Developer Suite 10i (ODS 10.12.02)
SuSe 11.0
Now when I runInstaller I get this, which is surprisingly similar:
Start output from spawned process:
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
/usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
-lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
Richard. -
Installing oracle 10g on windows XP is giving problem
Iam successfully installed oracle 10g on top of that iam installing some scripts to load ALUI.(aqua logic user interaction)
in that when iam running this script (CreateService.bat PLUM10 plum10) facing below error.
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>CreateService.bat PLUM10 p
lum10
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>ORADIM -NEW -SID PLUM10 -I
NTPWD plum10 -STARTMODE AUTO -PFILE D:\oracle\admin\PLUM10\pfile\initPLUM10.ora
1>>CreateService.log
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>SET ORACLE_SID=PLUM10
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>echo PLUM10 1>>SetEnvServ
ice.log
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>type CreateService.log
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
Message 51 not found; No message file for product=RDBMS, facility=ORADIM
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
Message 51 not found; No message file for product=RDBMS, facility=ORADIM
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>
If any body help is much needed...
Thanks u so much...maybeSET ORACLE_HOME=D:\oracle\product\10.2.0
-
An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit
Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PMHi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath -
I'm install oracle 10g r2 on SUSE 10.1, but when call "runInstaller" appears an error:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 8 occurred at PC=0xF7EF926B
Function=(null)
Library=/lib/ld-linux.so.2
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
- locked <0xe6fe7f20> (a java.util.Vector)
- locked <0xe6fe7f38> (a java.util.Vector)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
- locked <0xe6fe7460> (a java.lang.Runtime)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Dynamic libraries:
08048000-08056000 r-xp 00000000 68:03 1327705 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/bin/java
08056000-08059000 rwxp 0000d000 68:03 1327705 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/bin/java
08059000-0831a000 rwxp 08059000 00:00 0 [heap]
e4caa000-e4cbf000 r-xp 00000000 68:03 2277383 /usr/X11R6/lib/libICE.so.6.4
e4cbf000-e4cc0000 rwxp 00014000 68:03 2277383 /usr/X11R6/lib/libICE.so.6.4
e4cc2000-e4cca000 r-xp 00000000 68:03 2277385 /usr/X11R6/lib/libSM.so.6.0
e4cca000-e4ccb000 rwxp 00007000 68:03 2277385 /usr/X11R6/lib/libSM.so.6.0
e4ccb000-e4dbf000 r-xp 00000000 68:03 2277389 /usr/X11R6/lib/libX11.so.6.2
e4dbf000-e4dc2000 rwxp 000f4000 68:03 2277389 /usr/X11R6/lib/libX11.so.6.2
e4dc2000-e4dc6000 r-xp 00000000 68:03 2277442 /usr/X11R6/lib/libXtst.so.6.1
e4dc6000-e4dc7000 rwxp 00004000 68:03 2277442 /usr/X11R6/lib/libXtst.so.6.1
e4dc7000-e4dd4000 r-xp 00000000 68:03 2277413 /usr/X11R6/lib/libXext.so.6.4
e4dd4000-e4dd5000 rwxp 0000c000 68:03 2277413 /usr/X11R6/lib/libXext.so.6.4
e4dd5000-e4e21000 r-xp 00000000 68:03 2277377 /usr/X11R6/lib/libXt.so.6.0
e4e21000-e4e25000 rwxp 0004b000 68:03 2277377 /usr/X11R6/lib/libXt.so.6.0
e4e25000-e4e33000 r-xp 00000000 68:03 3623598 /etc/ld.so.cache
e4e33000-e4e3a000 r-xp 00000000 68:03 2670602 /usr/lib/libXp.so.6.2.0
e4e3a000-e4e3b000 rwxp 00006000 68:03 2670602 /usr/lib/libXp.so.6.2.0
e4e3b000-e4e8e000 r-xp 00000000 68:03 1327561 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libmlib_image.so
e4e8e000-e4e8f000 rwxp 00052000 68:03 1327561 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libmlib_image.so
e4e8f000-e5160000 r-xp 00000000 68:03 1327544 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libawt.so
e5160000-e5176000 rwxp 002d0000 68:03 1327544 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libawt.so
e519b000-e5420000 r-xs 00000000 68:03 917710 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/ewt3.jar
e5420000-e5447000 r-xs 00000000 68:03 917715 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/help4-nls.jar
e5447000-e54ac000 r-xs 00000000 68:03 917714 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/help4.jar
e54ac000-e5561000 r-xs 00000000 68:03 917727 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/oracle_ice.jar
e5561000-e557e000 r-xs 00000000 68:03 917725 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_zh_TW.jar
e557e000-e559b000 r-xs 00000000 68:03 917724 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_zh_CN.jar
e559b000-e55b9000 r-xs 00000000 68:03 917723 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_pt_BR.jar
e55b9000-e55d6000 r-xs 00000000 68:03 917722 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_ko.jar
e55d6000-e55f2000 r-xs 00000000 68:03 917721 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_ja.jar
e55f2000-e560f000 r-xs 00000000 68:03 917720 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_it.jar
e560f000-e562c000 r-xs 00000000 68:03 917719 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_fr.jar
e562c000-e5649000 r-xs 00000000 68:03 917718 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_es.jar
e5649000-e5668000 r-xs 00000000 68:03 917717 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp_de.jar
e5668000-e5684000 r-xs 00000000 68:03 917716 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstHelp.jar
e5684000-e56a5000 r-xs 00000000 68:03 917726 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/InstImages.jar
e56a5000-e56ab000 r-xs 00000000 68:03 917741 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/ojmisc.jar
e56ab000-e5789000 r-xs 00000000 68:03 917738 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/emCfg.jar
e5789000-e579c000 r-xs 00000000 68:03 917740 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/orai18n-mapping.jar
e579c000-e589c000 r-xs 00000000 68:03 917739 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/orai18n-collation.jar
e589c000-e5921000 r-xs 00000000 68:03 917737 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/xml.jar
e5921000-e592f000 r-xs 00000000 68:03 917746 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/share.jar
e592f000-e59f6000 r-xs 00000000 68:03 917743 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/srvm.jar
e59f6000-e5b1e000 r-xs 00000000 68:03 917742 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/xmlparserv2.jar
e5b1e000-e5b2b000 r-xs 00000000 68:03 917736 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/oneclick.jar
e5b2b000-e5ec8000 r-xs 00000000 68:03 917744 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/OraInstaller.jar
e5ec8000-e5ee4000 r-xs 00000000 68:03 1327533 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/ext/sunjce_provider.jar
e5ee4000-e5f9f000 r-xs 00000000 68:03 1327532 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/ext/localedata.jar
e5f9f000-e5fac000 r-xs 00000000 68:03 1327531 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/ext/ldapsec.jar
e61b0000-e61b7000 r-xs 00000000 68:03 4358699 /usr/lib/gconv/gconv-modules.cache
e61b7000-e61ea000 r-xp 00000000 68:03 4342576 /usr/lib/locale/en_US.utf8/LC_CTYPE
f3a40000-f3a42000 r-xp 00000000 68:03 2277395 /usr/X11R6/lib/libXau.so.6.0
f3a42000-f3a43000 rwxp 00001000 68:03 2277395 /usr/X11R6/lib/libXau.so.6.0
f5aeb000-f607a000 r-xs 00000000 68:03 1311166 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/charsets.jar
f607a000-f608b000 r-xs 00000000 68:03 1311204 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/jce.jar
f608b000-f6164000 r-xs 00000000 68:03 1311205 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/jsse.jar
f6164000-f617a000 r-xs 00000000 68:03 1311213 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/sunrsasign.jar
f61c4000-f78b2000 r-xs 00000000 68:03 1311212 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/rt.jar
f78b2000-f78c6000 r-xp 00000000 68:03 1327567 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libzip.so
f78c6000-f78c9000 rwxp 00013000 68:03 1327567 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libzip.so
f78c9000-f78e9000 r-xp 00000000 68:03 1327552 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libjava.so
f78e9000-f78eb000 rwxp 0001f000 68:03 1327552 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libjava.so
f78eb000-f78fb000 r-xp 00000000 68:03 1327566 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libverify.so
f78fb000-f78fd000 rwxp 0000f000 68:03 1327566 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/libverify.so
f78fd000-f7901000 rwxs 00000000 68:03 1065531 /tmp/hsperfdata_oracle/5768
f7901000-f7936000 r-xs 00000000 68:02 344767 /var/run/nscd/passwd
f7936000-f7959000 r-xp 00000000 68:03 4440091 /lib/libm-2.4.so
f7959000-f795b000 rwxp 00022000 68:03 4440091 /lib/libm-2.4.so
f795b000-f796c000 r-xp 00000000 68:03 4440094 /lib/libnsl-2.4.so
f796c000-f796e000 rwxp 00010000 68:03 4440094 /lib/libnsl-2.4.so
f7970000-f7d76000 r-xp 00000000 68:03 1327575 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/client/libjvm.so
f7d76000-f7d91000 rwxp 00405000 68:03 1327575 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/client/libjvm.so
f7da6000-f7ec1000 r-xp 00000000 68:03 4440083 /lib/libc-2.4.so
f7ec1000-f7ec3000 r-xp 0011a000 68:03 4440083 /lib/libc-2.4.so
f7ec3000-f7ec5000 rwxp 0011c000 68:03 4440083 /lib/libc-2.4.so
f7ec8000-f7eca000 r-xp 00000000 68:03 4440089 /lib/libdl-2.4.so
f7eca000-f7ecc000 rwxp 00001000 68:03 4440089 /lib/libdl-2.4.so
f7ecc000-f7edd000 r-xp 00000000 68:03 4440109 /lib/libpthread-2.4.so
f7edd000-f7edf000 rwxp 00010000 68:03 4440109 /lib/libpthread-2.4.so
f7ee1000-f7ee3000 r-xs 00000000 68:03 917745 /tmp/OraInstall2013-08-29_05-25-11PM/oui/jlib/OraInstallerNet.jar
f7ee3000-f7ee6000 r-xs 00000000 68:03 1327530 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/ext/dnsns.jar
f7ee6000-f7eee000 r-xp 00000000 68:03 1327577 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
f7eee000-f7eef000 rwxp 00007000 68:03 1327577 /tmp/OraInstall2013-08-29_05-25-11PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
f7ef0000-f7f0a000 r-xp 00000000 68:03 4440076 /lib/ld-2.4.so
f7f0a000-f7f0c000 rwxp 0001a000 68:03 4440076 /lib/ld-2.4.so
ff9c9000-ff9d6000 rwxp ff9c9000 00:00 0 [stack]
Heap at VM Abort:
Heap
def new generation total 576K, used 380K [0xe6440000, 0xe64e0000, 0xe6fc0000)
eden space 512K, 62% used [0xe6440000, 0xe64908e0, 0xe64c0000)
from space 64K, 90% used [0xe64c0000, 0xe64ce760, 0xe64d0000)
to space 64K, 0% used [0xe64d0000, 0xe64d0000, 0xe64e0000)
tenured generation total 1408K, used 178K [0xe6fc0000, 0xe7120000, 0xefa40000)
the space 1408K, 12% used [0xe6fc0000, 0xe6fec878, 0xe6feca00, 0xe7120000)
compacting perm gen total 4096K, used 1599K [0xefa40000, 0xefe40000, 0xf3a40000)
the space 4096K, 39% used [0xefa40000, 0xefbcfe58, 0xefbd0000, 0xefe40000)
Local Time = Thu Aug 29 17:25:12 2013
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)But, following notes 10gR2:
1 Certification Information
The latest certification information for Oracle Database 10g Release 2 (10.2) is available on My Oracle Support (formerly OracleMetaLink) at:
https://support.oracle.com
Linux Certification
Starting with Oracle Database 10g Release 2, the following operating systems are supported in addition to the list documented in Oracle Database Installation Guide for Linux x86-64:
Asianux 2
Asianux 3
Oracle Linux 4/Oracle VM
Oracle Linux 5/Oracle VM
Red Hat Enterprise Linux 4/Oracle VM
Red Hat Enterprise Linux 5/Oracle VM
SUSE Linux Enterprise Server 10
SUSE Linux Enterprise Server 11 -
Installing Oracle 10g personal edition
Hi,
I am trying to install Oracle 10g personal edition on ubuntu. After installing I ran the following command: /etc/init.d/oracle-xe configure and by mistake gave a port number for HTTP port on which already another server is running. But now I am unable to change my configuration settings.
Everytime I give the command /etc/init.d/oracle-xe configure it says "Oracle Database 10g Express Edition is already configured"
How can I change the configuration setting now? Do I need to reinstall it? Would be a great help, if somebody can tell me.
Thanks,
tulipIn oder for you to handle ports and monitor port assignment follow these steps:
SQL*Plus: Release 10.1.0.2.0 - Production on Mi Jan 25 11:44:33 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
SQL> -- get current status
SQL> select dbms_xdb.gethttpport as "HTTP-Port"
, dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 0You can change the http port and the ftp port to whatever you like (keep in mind that you need special privileges for ports < 1024 on Unix/Linux systems).
SQL> -- set http port and ftp port
SQL> begin
2 dbms_xdb.sethttpport('80');
3 dbms_xdb.setftpport('2100');
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> select dbms_xdb.gethttpport as "HTTP-Port"
, dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100If you only want to use the database without allowing access via http or ftp then you can disable both:
SQL> -- disable http and ftp access
SQL> begin
2 dbms_xdb.sethttpport('0');
3 dbms_xdb.setftpport('0');
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> -- get current status
SQL> select dbms_xdb.gethttpport as "HTTP-Port"
, dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
0 0~ Madrid -
Error while installing Oracle 10g on Fedora Core 1
Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.Are you createing DB also???
-
Error in Installing Oracle 10g Express Edition Universal on WIndows2003
While Installing Oracle 10g XE Universal On WIndows 2003 Server Standard Edition(Which is a standalone Machine). I got an following Error:
Error No: 0x80040707
Error Description: DLL Function Call Crashed: GetHostnameDll.getHostname.
Plz find some solution for the above problem.Hi
Here's the resolution that can work for you:
Disable the "Print Spooler" service before running the installer.
1.Open Control Panel: Start --> Settings --> Control Panel
2.Double-click "Services"
3.On the list of NT Services, right-click "Print Spooler"
4.Select "Stop"
5.Select "Properties"
6.Under Startup Type, select "manual" or "disabled"
7.Reboot your NT Server
8.After rebooting, verify that the Print Spooler is still "stopped".
9.Delete Program Files\Common Files\Installshield\Engine folder
10.Re-run the installer.
11.After installation, re-set the Print Spooler service to Startup type "Automatic" and start the service.
Also, have a look at the installshield page: http://consumer.installshield.com/kb.asp?id=Q108167
-Priya -
Error message when installing Oracle 10g on Windows XP Professional
Hello,
I need help installing oracle 10g database. When I attempt to run the installation from the setup.exe icon, I get a message that says
"Error in writing to directory C:\Documents and Settings\Owner\Local Settings\Temp\OraInstall2007-04-29_01-19-29PM. Please ensure this directory is writable and has atleast 45Mb of disk space. Installation cannot continue."
When I try to open the installation from the Autorun icon, it points to an innability to find setup.exe and when I go back to Setup.exe, it gives me the above error. Everytime I try to run the installation and it fails, the installation leaves a folder in my Temp folder with the above format. Any help would be appreciated. Thank you.I do have administrative privilege on my computer and I have plenty of space. I have 80gb of free space. What do I do to successfully install the software without incurring those messages I displayed in my first thread?
Maybe you are looking for
-
Ical to iweb: monthly view
I managed to embed my iCal into iWeb, but I can't seem to get rid of the mini months on the side or get it to publish in "month" view instead of "weekly" view. Any suggestions of how to correct this problem? Thanks
-
Currently we're experiencing an error on our BW reports link wherein our BW reports thru Internet Explorer can not be displayed. By clicking one of the reports the page can't be displayed. Currently what we are doing just to resolve the problem is to
-
Send purchase order by e-mail with address of bad partner order
I have a supplier with 3 addresses of order of which I choose 1 during the creation of the order. The creation of message NEU is done with the new partner. The sending by e-mail is done with the address of the initial partner. I do not find any note
-
Dear All, In our Scenario we are transfering the Inventory for the production (Daily) What ever is issued to perticular department(Warehouse). an from that warehouse items are issue for production. Example: Inventory Transfer: date Item X : transfer
-
Sharepoint 2010 Webpart debugging - Writing to the console
I am creating a SharePoint 2010 Webpart, and I'd like to write to the console for debugging purposes. Unfortunately the command Console.Writeline doesn't seem to work for me. How do I fix this??