Unable to Install Oracle 12 on Windows Server 2012 R2

Hello:
I have attemted several times to install Oracle 12c Release 1 on a Windows 2012 R2 server but it fails during the Net Configuration phase. I've the log file but I am not able to dicern anything of value from it.
Any help will be appreciated.
Venki

user9023421 wrote:
Srini:
As per Oracle Database Quick Installation PDF, " Windows Server 2012 x64 - Standard, Datacenter, Essentials, and Foundation editions" is supported.
venki
This is for R1, not R2
Which version are you installing on ? R2 is currently not a certified OS
HTH
Srini

Similar Messages

Not able to install IIS on Windows Server 2012

I am unable to install IIS on Windows Server 2012. I get the error as shown in the below screenshot. Error code is 0x800f0922. I did RestoreHealth but that has not helped. Any help will be appreciated.

Hi Yogesh,
Just last week was installing IIS on W12R2 server and got stuck and found easy way of installing this as follow.
when you start installing IIS and at the last step as i marked on red square confirmation. there you find
export configuration settings..go to and export it to C drive and open Powershell by right clicking as open as administrator and run this from Powershell and it will install successfully.
Please let me know if you are facing any issue, since this way it has to work.
OR if you it already worked let me know or mark as correct.
Regards
Raj Navalgund
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage.

VMM Agent install fails on Windows Server 2012 R2 Hyper-V

Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
Thanks
Kumaresan Lakshmanan

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

ProClarity 6.3 PAS install fails on Windows Server 2012

We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
Kevin

I have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas

Getting error 'proc_createNewAppSiteDomainIds' when I try to install SharePoint on Windows Server 2012

I have a Windows Server 2012 setup with SQL 2012 SP1 installed. I have tried to install Sharepoint Foundation 2013 and also full blown Sharepoint version...but during the wizard setup I always get 'Cannot find the object 'proc_createNewAppSiteDomainIds',
because it does not exist or you do not have permission.
The install created my db in sql 'team1p-vm' but that is it.
What am I missing?
During the install I have tried both Complete and Stand-alone as the Server Type.
When it gets to the product configuration wizard I use:
Create a new server farm
I enter my database server name: team1p-vm
Database name: SharePoint_Config
I enter my db access account
I enter a farm security settings passphrase
I use 17012 as my port number, select NTLM
I see my configuration settings...
Click Next and I get the error on task 3 of 10.
here is the dump of the application Log: At least some of it.
An exception of type System.Data.SqlClient.SqlException was thrown. Additional exception information: Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.
System.Data.SqlClient.SqlException (0x80131904): Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.

Can you see if there is anything in the SQL ERRORLOG on the SQL Server that may help at the time you see this error?
Does your user account (the user you're installing SharePoint with) have the sysadmin fixed role in SQL Server?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

CF11 install problem on WIndows server 2012 R2

We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine. cfm files will not serve up in the default directory, but IIS shows htm files fine. CF administrator runs fine.
Web Server Config tool will only show "None" in the IIS Web Site box. The usual CGI, APS, etc have been installed on IIS. In fact IIS and CF11 have been reinstalled. wsconfig.exe manual run shows no errors.
The problem is that any call to a cfm template results in an error (html pages serve fine):
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Detailed Error Information:
Module       IsapiModule
Notification       ExecuteRequestHandler
Handler       cfmHandler
Error Code       0x8007007f
Requested URL       http://localhost:80/default.cfm
Physical Path       C:\inetpub\wwwroot\default.cfm
Can anybody give any suggestions for troubleshooting? No logs seem to show any information that helps.

Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
2) reboot
3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
4) restart IIS and CF
5) Set Web Server Config to "All"
60 restart IIS and CF
The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2

Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.

I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU   06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013   06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor   1.0
Information about my package
CodeRush for Visual Studio   13.2
Common Azure Tools   1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg   1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage   1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage   1.0
DevExpress VSIX Package
DevExtreme.Design   13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio   13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0   1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package   1.0
XtraReports package

Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

When trying to install last update, receiving next errors:
Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

Hi,
Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
http://support.microsoft.com/kb/883825/en-us
If the problem still exits, open Run, type %windir% and hit
Enter, find a text file named WindowsUpdate, uploaded the log file.
Best Regards,
Eve Wang

Installing driver on windows server 2012 R2 in VAIO-VPCEH38FN model

Hi,
Q1. I'm using Windows server 2012 R2. How can I install ethernet driver,Wifi Driver, Bluetooth driver etc in my VAIO laptop. can i install or not?
Q2. can i install one Windows 7 and another Windows server OS in same drive?
Please reply soon.. Thank you!
Rajnikant

Hi Rajnikant,
>>>Question1
As Dave have mentioned above, we may need to consult with the manufacturer of the laptop.
>>>Question2
If you want to create a multi-boot system, please refer to the link below,
http://technet.microsoft.com/en-us/library/ee829686(v=WS.10).aspx
Best Regards.
Steven Lee
TechNet Community Support

70-410 installing and configuring windows server 2012

I know this exam goes as credit toward a windows server 2012 mcsa. But, after passing it, will you be an mcp windows server 2012? Or do you get any other designation from passing the test?

You will have MCP, the next test will not get MCP unique for so you can download or view a page that contains all the tests you have passed (at the site
microsoft.com/mcp)
Of course after three tests you get MCSA, if you add two more will also receive MCSE.
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Issues on Installing Oracle on Windows Server 2008 Guested on VMware Workstation 10

I am trying to install Oracle 11g R2 on Windows Server 2008 Guested on VMware Workstation 10 but I am getting this Warning on Enterprise Manager Configuration at the end of installation.
Besides, when I tried to connect to hr database through Oracle SQL Developer I am getting following error:
Can you please let me know what I have done wrong? and how can I fix This? Thanks

Farzanx1 wrote:
I need to install and configure Active Directory and DNS service on a
remote Windows Server 2008 R2 which has a public facing IP, gateway
and DNS. I don't really understand such network structure:
IP Address: xx.xx.93.158
Subnet Mask: 255.255.255.252
Default Gateway: xx.xx.93.157
DNS: xx.xx.64.10
I have experience on installing AD and DC, DNS services on local
servers (which then the server becomes the DC for the local network)
but I hesitate to do this on a publicly facing production server.
Unfortunately I wasn't able to find a proper guide for my case.
Would appreciate if someone could guide me on the steps I need to
take so that I will not disturb the current network settings. (A
little down time for installing the services and features is ok as
long as I don't lose connectivity)
Thanks
You want to install AD on an Internet Server?
According to your description your server has one public IP-address and
no internal IP-address and you want to install AD on this Internet
server?? Is that correct??
Can you tell us the intended use of this server. Do you want to host
services on this server, which need AD authentication?
If you have a second NIC and your DC is on another local machine I
would not expose your local AD on an public accessible server. If this
server shall become a DC it should not have more than one IP-address.
If you want to access data on this server via Internet securely I would
recommend a VPN solution - preferably not running on the server itself
but on a separate firewall between the server and the internet. In this
case I would have no see a big security problem running AD on this
server.
Wolfgang

Unable to install illustrator on windows server 2008

I keep getting error messages when trying to install the free trial of Illustrator with windows server 2008 platform. Is this not an approved OS?

You can't use AI in a server environment. That would violate the EULA. Single user only.
Not true. Local installs and usage do not in any way collide with the EULA even on a server OS. He said nothing about provisioning or setting it up for remote users.
Mylenium

How to install itunes on windows server 2012

I am trying to instal itune on my server please help me

Hi,
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Cataleya Li
TechNet Community Support

How do i install mysql on windows server 2012 r2 using powershell(automate)??

i have a requirement of installing the mysql server with one click deployment using power shell by passing the parameters needed into the mysql console. can i achieve that ?
can anyone help me in doing that?
thanks in advance.
Suresh Gaddam

Hi Suresh,
This forum is for SCOM related questions, it seems like that you are asking for powershell script to install Mysql. From my point of view, I don't think that using powershell to install Mysql is an easy way, as it is hard to say whether Powershell can get
information from Mysql install console with some API.
In addition, for further assistance, please contact MySQL forum and Powershell forum.
Thanks for your understanding!
Regards,
Yan Li
Regards, Yan Li

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Install Windows Server 2012 R2 VM on Storage Spaces with Storage Tiers

Hey guys
In my small/medium sized company we will soon update to Windows Server 2012 R2. I would like to implement virtual servers using Hyper-V. I didn't find a lot of information about Hyper-V in combination with storages spaces and autoamted storage tiers.
And this is very confusing to me as it seems to me that this would be the best practice as it is the most cost-efficient and most elegant solution.
My ideal scenario:
With Hyper-V I virtualize two Windows Server 2012 R2 instances. So two separate virtual machines.
I use the following disk setup:
1x cheap HDD 40GB for hyper-v server 2012 r2 core.
2x SSD 200GB (enterprise-grade)
2x HDD 4TB (7.2k, enterprise-grade)
Step 1:
I will install Hyper-V Server 2012 R2 Core on the 40GB HDD. Via command line, I will create a storage pool with automated tiered storage using the SSDs and the HDDs in mirrored mode the following way:
With Tiered Storage, I create a storage pool containing the SSDs and the HDDs. Then I create storage space A (1TB) and B (3.2TB) with the SSDs in a mirrored setup and the HDDs in a mirrored setup. The SSDs for the „hot files“ and the HDDs for the „cold files“.
Step2:
Ontop of the storage space A I want to install the first Windows Server 2012 R2 instance with Active directory. On storage space B I want to install the second Windows Server 2012 R2 instance for a business application to run on it.
Conclusion:
The SSDs are mirrored and therefore one SSD can fail.
The 4TB HDDs are mirrored and therefore one HDD can fail.
I have a fast and easy scalable environment.
But in the Internet I found many information that it’s not possible to install an operating system onto a storage tier.
Question 1:
Is this setup possible?
Question 2:
If this setup is possible, why is not everyone doing it?
Question 3:
Is it possible to do Step 1 over a GUI from a remote machine?
Question 4:
If the creation of Storage Tiers in the Hyper-V Server 2012 R2 is not possible. Would it work to use a Windows Server 2012 R2 as a parent system on the 40GB HDD? To do Step 1?
I would gladly get some feedback of people knowing Storage Tiers well.
Thanks a lot!

I would absolutely prefer a GUI. But a Windows Server 2012 R2 Standard Licence allows you to run two VM machines.
It also grants you a physical installation ("POSE" in the licensing documents). You can buy one copy of WS2012R2 Standard, install it on the hardware, enable Hyper-V, and then operate two virtual machines with WS2012R2 Standard ("VOSE"
in the licensing documents). The only restriction is that the management operating system (POSE) can only run services and applications meant to manage the virtual machines and/or the management operating system. The Hyper-V Server license is the same way
so it's not really any different.
In short, given the benefits of the GUI at your stage of learning, you have no solid reason not to install the full system and take advantage of it. You can disable the GUI later once you get your footing. Or not. Whatever suits you. However, in response
to your Question 3, you can do this all remotely. Once you get WS2012R2 installed in a guest, you can use it to manage the management operating system if you want. There are many options.
But then I would also need to have redundancy on the 40GB HDD as if this HDD brakes, all others brake as well?
Yes, you're going to want some redundancy for the management operating system. But, you've listed 5 drives in your original layout. You don't really have a 5-bay system, do you? Is there an empty sixth bay? Could you not get two 40 GB drives instead of one
and use hardware RAID-1?
Eric Siron
Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.

Unable to Install Oracle 12 on Windows Server 2012 R2

Similar Messages

Maybe you are looking for