Unable to install Oracle 8i personal edition into W2K pro

I am unable to install 8i personal edition Release 3 onto my W2K machine. I download the zip file and unzip it into (c:/OracleInstall) a folder I have created on my c:/ drive. When i click on the setup.exe file it opens up. When I click on the install button the GUI disappers and nothing occurs. I have attempted to burn it onto a CD_Rom and install through the control panel and the same occurs.
I am not sure what is causing this problem. Is there any why I could request the software in a CD as opposed to a zip file? What could be causing this problem?

I am unable to install 8i personal edition Release 3 onto my W2K machine. I download the zip file and unzip it into (c:/OracleInstall) a folder I have created on my c:/ drive. When i click on the setup.exe file it opens up. When I click on the install button the GUI disappers and nothing occurs. I have attempted to burn it onto a CD_Rom and install through the control panel and the same occurs.
I am not sure what is causing this problem. Is there any why I could request the software in a CD as opposed to a zip file? What could be causing this problem? Is the machine a P4? there is a known problem
I don't know about his machine, but mine is a P4. Where do I find this information about this problem? And is there a fix? I need to install the NET8 Assistant.

Similar Messages

  • Unable to install Oracle 8i Personal Edition in Windows98 with Pentium4

    I am getting error "Performed illegal Operation" when ever I
    unzip and install Oracle 8i PE 8.1.7 for windows98. Error is
    JREW caused an invalid page fault in module JAVAI.DLL,
    suggestions was install new JRE Version. I have tried to format
    hard drive (twice) thinking some software incompatibility, no
    go. remove devices, no go. After further analysis it seems there
    is issue installing 8i databse Personal Ed. in Pentium 4
    processor with an Intel motherboard latest Bios. I have
    downloaded and installed JRE Version 1.1.8_008, still no go.
    What am i missing? Please advice or suggestion. Thank you. Email
    me- [email protected]

    I am unable to install 8i personal edition Release 3 onto my W2K machine. I download the zip file and unzip it into (c:/OracleInstall) a folder I have created on my c:/ drive. When i click on the setup.exe file it opens up. When I click on the install button the GUI disappers and nothing occurs. I have attempted to burn it onto a CD_Rom and install through the control panel and the same occurs.
    I am not sure what is causing this problem. Is there any why I could request the software in a CD as opposed to a zip file? What could be causing this problem? Is the machine a P4? there is a known problem
    I don't know about his machine, but mine is a P4. Where do I find this information about this problem? And is there a fix? I need to install the NET8 Assistant.

  • Cannot install Oracle 8i (Personal Edition) 8.1.7 on Windows 98 (Second Edition)

    Hello,
    I am unable to install Oracle 8i Personal Edition on my Windows 98 (Second Edition) system. I have selected "typical" install. All the files get installed (100% complete) but then the Configuration Tool install phase fails to complete when installing Oracle Database Configuration Assistant. I get the following error message :
    java.lang.NullpointerException
    at DropOracle.QueryDB(Compiled Code)
    at DeletePanel.InitControls(Compiled Code)
    at DeletePanel.<init>(DeletePanel.java:100)
    at DBCreateWizard.<init>(DBCReateWizard.java:569)
    at DBCreateWizard.main(DBCreateWizard.java:1422)
    The system just hangs with the "in progress" message.
    The previous step -
    The Net8 Configuration Assistant install completes successfully
    (return code 0).
    If anyone can help me resolve my problem it will be greatly appreciated.
    Or if you could tell me which Oracle email address (or phone number) I should address my problem to it will be appreciated. I do NOT have a Oracle Support Licence (I only purchased the evaluation CD pack).
    I have installed Java 2 (JDK 1.3) in a separate directory - but I understand Oracle 8i has its own version of JRE 1.1... in its own subdirectory structure ... so my JDK 1.3 should not be interfering with the Oracle 8i installation programs.
    Many thanks in advance.
    Partha Sur
    732-873-2547

    What is your RAM? I ran into the same problem, even though I had more RAM then required. I had to shutdown everything, make a very basic wallpaper that did not put too much strain on the system, then it installed.
    Unistall Oracle, remove all the remaining files and the directory by hand. Also you have to remove any trace of Oracle in your regedit. Check if path to Oracle is still in autoexec.bat; if it is delete it - the Oracle path not the file. Reboot and then do Alt-Ctr-Del and turn off all the unecessary programs and try installing it again.
    Hope it works.
    Iwona

  • Installing Oracle 10g personal edition

    Hi,
    I am trying to install Oracle 10g personal edition on ubuntu. After installing I ran the following command: /etc/init.d/oracle-xe configure and by mistake gave a port number for HTTP port on which already another server is running. But now I am unable to change my configuration settings.
    Everytime I give the command /etc/init.d/oracle-xe configure it says "Oracle Database 10g Express Edition is already configured"
    How can I change the configuration setting now? Do I need to reinstall it? Would be a great help, if somebody can tell me.
    Thanks,
    tulip

    In oder for you to handle ports and monitor port assignment follow these steps:
    SQL*Plus: Release 10.1.0.2.0 - Production on Mi Jan 25 11:44:33 2006
    Copyright (c) 1982, 2004, Oracle.  All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
    SQL> -- get current status
    SQL> select dbms_xdb.gethttpport as "HTTP-Port"
                , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port   FTP-Port
         8080          0You can change the http port and the ftp port to whatever you like (keep in mind that you need special privileges for ports < 1024 on Unix/Linux systems).
    SQL> -- set http port and ftp port
    SQL> begin
    2    dbms_xdb.sethttpport('80');
    3    dbms_xdb.setftpport('2100');
    4  end;
    5  /
    PL/SQL procedure successfully completed.
    SQL> select dbms_xdb.gethttpport as "HTTP-Port"
                , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port   FTP-Port
           80       2100If you only want to use the database without allowing access via http or ftp then you can disable both:
    SQL> -- disable http and ftp access
    SQL> begin
    2    dbms_xdb.sethttpport('0');
    3    dbms_xdb.setftpport('0');
    4  end;
    5  /
    PL/SQL procedure successfully completed.
    SQL> -- get current status
    SQL> select dbms_xdb.gethttpport as "HTTP-Port"
                , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port   FTP-Port
            0          0~ Madrid

  • Problems facing while installing Oracle 8i personal edition under win98se

    hello,
    I am having problems while installing Oracle 8i personal edition
    under win98se.
    I am stuck on the creation of database. it always stuck at 85%.
    I've try installed many many times.. but it still the same..
    what can i do?
    i am using win98 se.
    is there any solution for this problems?
    thanks~!

    Under Win 98SE (Personal Oracle 8i)creation of database - very
    long. Therefore choose a mode of creation of base - copy from CD.
    Then the base can be increased.
    Best regards - Alex

  • Installing oracle 8i personal edition 8.1.5 on windows XP system

    I want to know the installing procedure for oracle 8i personal edition 8.1.5 on windows XP system or which version of Personal Oracle can be loaded in Windows XP System. Pl do the needful.
    Thanks & Regards,
    Shahul.

    8I ON XP
    be careful xp stand for xtra problem :-)
    i think if u want to install oracle personal edition
    on xp go for
    Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP
    see
    http://otn.oracle.com/software/products/oracle9i/index.html
    and enjoy your life:-)
    kuljeet pal singh

  • Installing Oracle 8i Personal Edition in Win98

    Hi,
    Would like to find out if there is any issue in installing Oracle 8i Personnal Edition in windows ME.
    I have this error message when I tried to install the programme.
    "Jrew has caused an error in JAVAI.DLL. Jrew will now close."
    Anyone can help ??
    Thanks a million... :)
    Alvin Tan

    It won't work on ME. Look back in the discussion forum about a month ago, some people wrote in about how you might change your registry to get it to work. Didn't work on my system though. Good luck!

  • Unable to install Oracle 8i Enterprise edition on Win2k Professional

    Hi,
    I upgraded windows98 with Win2k Professional.
    When i try to install Oracle 8i Enterprise edition from CD on Win2k Professional, i am get the following message:
    The Java Run time environment was not found at
    ../stage/components/oracle/swd/jre/1.1.7/1/DataFiles/Expanded\win32\bin\jrew.exe Hence oracle universal installer cannot be run.
    I would appreciate if anyone could get back to me with the easy steps to the above problem.
    thanks,
    Adem

    Try remove installed JRE1.1.8 BEFORE installation of Oracle. May be it can't remove old installation.
    PS Check downloaded distrib - some jars may be spoiled.

  • OCX errors went installing Oracle 8i personal edition

    I downloaded the zip for 8i personal edition. When trying to install it I repeatedly got errors that the OCX could not be registered. Can someone tell me how to correct this?

    It is not possible installing Oracle in WINDOWS ME platform, because this won't support for ORACLE. Unfortunately ORACLE also have no version for WINDOWS ME. If possible, upgrade your OS to WINDOWS 2000 or downgrade to WINDOWS 98 and try it.

  • Installing Oracle 9i Personal Edition on XP

    Hi, I am trying to install 9i Personal Edition on my Dell PC running XP. It gets 2% complete and gives me an error "Invalid Staging Area. There are no top level components for Windows NT for installion in this staging area." Another problem is that I am accessing our other oracle databases from this desktop and after this install fails it screws up my registry entries so bad that none of my montoring tools work and I have to manually fix it. Any suggestions?

    Do you have any oracle products currently installed?

  • Receiving error when trying to install Oracle 8i Personal Edition

    I'm trying to install 8i personal edition, and the installer is attempting to use this file as the stage file: D:\stage\products.jar. I can only assume its corrupt. Can anyone help me?
    Steve

    The error message I get on the install is, "INVALID STAGING AREA. NO TOP LEVEL COMPONENTS FOR WINDOWS 95 AVAILABLE FOR INSTALL." The install is using C:\WINDOWS\TEMP\INSTALL\STAGE\ PRODUCTS.JAR, which is where the UNZIP placed the components. The 8i Personal Edition I downloaded was for Windows 98, so I don't understand why it's looking for Windows 95 components. Also, I have Windows ME, not Windows 98, but I assume this download should work for Windows ME?

  • Installing Oracle 8i Personal Edition on Home Computer

    I'm installing Oracle 8i from CD included in SQL text book.
    Unzipping of files goes well. System locks up right
    after "setup" screen, showing the message, "updating System PATH
    variable." Necessary to do an "end task" to free up the
    system. Any suggestions on how to successfully compete the
    installation?
    2nd issue: When starting SQL Plus using the above mentioned
    software, a network login dialogue box appears. How does one
    get around this dialogue box, especially knowing that this home
    computer is not on a network?
    Thank you.

    I'm installing Oracle 8i from CD included in SQL text book.
    Unzipping of files goes well. System locks up right
    after "setup" screen, showing the message, "updating System PATH
    variable." Necessary to do an "end task" to free up the
    system. Any suggestions on how to successfully compete the
    installation?
    2nd issue: When starting SQL Plus using the above mentioned
    software, a network login dialogue box appears. How does one
    get around this dialogue box, especially knowing that this home
    computer is not on a network?
    Thank you.

  • Problem installing oracle 817 Personal Edition in non-interactive mode

    When I install oracle 817 PE in silent mode, if there's a pre-8.1.6 version of Oracle already installed the Oracle Data Migration Assistant pops up. This is exactly what I don't want to happen. Is there a way to keep ODMA from launching? Thank you.

    It is not possible installing Oracle in WINDOWS ME platform, because this won't support for ORACLE. Unfortunately ORACLE also have no version for WINDOWS ME. If possible, upgrade your OS to WINDOWS 2000 or downgrade to WINDOWS 98 and try it.

  • Installing Oracle 8i Personal Edition

    I'm new to Oracle and I'm having problems log-in into Oracle.
    Whats the default username and password and the domain (if any)?
    thanks.

    There are two DBA users
    1. SYSTEM and passpard is MANAGER
    2. SYS/CHANGE_ON_INSTALL
    Try that ......

  • Installing Oracle 8i Enterprise Edition on XP Pro

    I am trying to install Oracle8i - Release 3(8.1.7) on my computer which is a Celeron 1.7GHz with 512MB of RAM and a 40 GIG hard drive.
    when I put the Oracle8i CD into the CD-ROM drive the autorun feature starts. I then click on the Install/DeInstall Products button but nothing happens.
    I do not have a previously installed version of Oracle and therefore do not have the file symcjit.dll on my PC

    I am trying to install Oracle8i - Release 3(8.1.7) on my computer which is a Celeron 1.7GHz with 512MB of RAM and a 40 GIG hard drive.
    when I put the Oracle8i CD into the CD-ROM drive the autorun feature starts. I then click on the Install/DeInstall Products button but nothing happens.
    I do not have a previously installed version of Oracle and therefore do not have the file symcjit.dll on my PC

Maybe you are looking for