Unable to install Oracle Developer Suite 10g on Windows 7

Hello,
I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
Any help would be appreciated - thanks in advance.

The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Similar Messages

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

Problem installing oracle developer Suite 10g on window 7 64 bit

hi am in window 7 64-bit am trying to install my oracle developer suite am geting this error when installing
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\User
s\10017134\AppData\Local\Temp\OraInstall2012-09-21_08-15-55AM\installActions2012
-09-21_08-15-55AM.log
Please press Enter to exit...
i downlload the software from
http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html
my pc is window 7 professional service pack 1
64-bit operating system
now am geting this error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation, at which time they will be rechecked.
Continue? (y/n) [n]
i try to right click mycomputer->advance system setting->system properties->advance->performance->setting->advance->virtual memory->change->virtual memory
Edited by: ADF007 on 2012/09/21 9:22 AM
Edited by: ADF007 on 2012/09/21 9:49 AM
Edited by: ADF007 on 2012/09/24 12:12 PM

hi my installation fail am geting this error
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Net Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: 'C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp'
Start output from spawned process:
Parsing command line arguments:
Parameter "orahome" = C:\DevSuite
Parameter "orahnam" = DevSuite
Parameter "responsefile" = C:\DevSuite\network\install\netca_asinstall.rsp
Done parsing command line arguments.
The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to C:\DevSuite
Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***
User Selected: Cancel
The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to C:\DevSuite
Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***
User Selected: Yes/OK
End output from spawned process.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
Result code for launching of configuration assistant is: -1
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***
User Selected: Yes/OK
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file C:\DevSuite\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo Oracle Net Configuration Assistant
C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp
Error:*** Alert: One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured. A list of the assistants that need to be run is generated in the log of this session which is located at:
C:\Program Files (x86)\Oracle\Inventory\logs\installActions2012-09-21_10-14-35AM.log ***
Edited by: ADF007 on 2012/09/21 4:52 PM
Edited by: ADF007 on 2012/09/21 4:52 PM

Installation of an Oracle Developer Suite 10g on Windows XP doesnt work

Hello.
I try to instal Oracle Developer Suite 10g on Windows XP. I run setup.exe from DISK1 directory. Universal installer starts and Welcome screen appears. I click "Next" to "Specify file locations" screen. But when I choose Source Path and Destination Name and Path and I click "Next" again, nothing happens. In installation log I can see strange error message. You can see it in part of log bellow:
*** Welcome Page***
Initializing install inventory
Setting up install inventory
*** Specify File Locations Page***
Setting the 'SourceLocation ( FROM_LOCATION )' property to 'C:\xxx\OracleDevSuit\Disk1\stage\products.jar'. Received the value from the UI page.
Setting the 'OracleHome ( ORACLE_HOME )' property to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraClient10g_home1'. Received the value from the UI page.
Initializing OUI access setup
Setting variable 'ORACLE_HOME' to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
Error:*** Alert: null ***
User Selected: Cancel
Can anybody help me? I am very confused about this error message.
Thanks very much.
Petr.

Are you logged in as an administrator?
I wouldn't install in Program Files anyway. I'm not sure, but I have a gut feeling that Oracle doesn't like spaces in file and directory names. Install in C:\Oracle directory.

How to install Oracle Developer Suite 8 on windows 8 64bit

Hi, everyone.
I have facing problem. How to install Oracle Developer Suite 10g on windows 8. Please send me step by step install.
Thanks
Mbulur.

No version of Forms/Reports is currently supported on Windows 8. Also, because Error Correction support for versions older than 11 have ended, no new certifications will be provided for those versions. I would recommend you consider upgrading to Forms/Reports 11.1.2.1 as we are hoping for Win8 certifications in the future for this version.

Install oracle developer suite 10g on ubuntu

Hi,
Is it possible to install oracle developer suite 10g on ubuntu?

979155 wrote:
Hi,
Is it possible to install oracle developer suite 10g on ubuntu?Better search at ubuntu forum.
Here one link
1. http://ubuntuforums.org/showthread.php?t=548631
2. http://ubuntuforums.org/showthread.php?t=1393013
3. {thread:id=2432469} {thread:id=669088}
Hope this enough...
Hamid

How can i install oracle developer suite 10g on centos 5.5

Hello all ,
i would like to install oracle developer suite 10g on centos 5.5
Thank's all :)

CentOS is not a supported distro for installing Dev Suite 10g - http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
Unless you use a certified OS, you are on your own
HTH
Srini

Want to install Oracle Developer Suite 10g R2 on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Developer Suite 10 is not certified or supported to be installed on Win7 (64bit). Although it can be done, you will have problems later if you manage to get it installed. If you really want to have it on your Win7 laptop, I encourage you to install "Windows XP Mode", which is part of Windows Virtual PC. This is free to licensed Win7 users (does not apply to Home edition). Refer to the following:
http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7

Error on installing Oracle Developer Suite 10g (10.1.2.0.2)

I try to install:
Oracle Developer Suite 10g (10.1.2.0.2), and lick on the set up icon. Then
I get error message:
"Actuall checking SWAP space: 1440 MB availabe, 1535 MB required... Failed "
I don't understand what is meant, and how to fix it?
I have C:\ dirve free space 11.1GB, and G:\ drive free space 463 GB. I try to install the package in G: dirve. I use MS Window XP.
Thank you
Alex

Alex-
Increase your Windows paging file by going to Control Panel->System->Advanced(tab)->Performance Settings(button)->Advanced(tab)->Virtual Memory. Change the Initial size to be at least 1535MB.
Dan

Installed Oracle Developer Suite 10g (9.0.4) in Linux

my system is Linux enterprise 3, update 5 (Kernel 2.4.21-32.ELsmp)
I haved Installed Oracle Developer Suite 10g (9.0.4) by using instruction in Oracle9i Developer Suite Installation for RedHat Install successful.
when I run form builder (oracle_home/bin/f90desm.sh, rwbuilder), it show that:
Segmentation fault
Please help!

And how to set RHEL 3 to allow install Oracle
Developer Suite 10g (9.0.4.0.0)?Main documentation link:
http://www.oracle.com/technology/documentation/index.html
Under Development Tools, click Oracle Developer Suite Release 10g (9.0.4), then View Library (Documentation Library for Windows, Linux, Solaris, and HP-UX). The Tab Getting Started has Install guides.

How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAP

Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini

Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0

Hi all,
I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
Here's the actual (make failure) log entry:
gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
Richard Foley
ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
*** End of Installation Page***
The installation of Oracle Developer Suite 10g was successful.
Edited by: orafoley on Oct 14, 2008 5:19 PM

Hi Hub,
Done that, nothing:
$> env | grep -i LD
$>
On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
Oracle 10.2.01
Oracle Developer Suite 10i (ODS 10.12.02)
SuSe 11.0
Now when I runInstaller I get this, which is surprisingly similar:
Start output from spawned process:
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
/usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
-lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
Richard.

Unable to start Oracle Soa suite 10g on Windows 7

I am able install oracle soa suite 10g on Windows7 platform. But I am unable to start Oracle Soa Suite 10g. Wenever I am starting the SOA suite a new window is popping up the default color scheme of windows 7 is getting changed, but after that this window is disappearing without showing any error. From the task manager console I can see that a javaw process is getting started, but this opmn process is not getting started.
System configuration -
OS : Windows7
RAM: 2 GB
SOA Suite installation : Default (Including JDK and DataBase configuration).
If you have any resolution to this strange problem please let me know. Thanks in advance.

I would be surprised if the amount of RAM in your machine is a limiting factor...
These blog posts contain useful info when running SOA Suite with resources on the low end of the spectrum. You could also use the [BPM AMI on Amazon EC2|http://www.deltalounge.net/wpress/2010/06/soa-suite-11gr1-ps2-notes-and-blogs/] ...
hth

Unable to install Oracle Developer Suite 10g on Windows 7

Similar Messages

Maybe you are looking for