Unable To Install Oracle On P4 having Windows XP

Hi,
i m trying to install oracle 8 on p4 system with windows XP os. but every tiem i receive dthe message of "rdbms.map file not found while mapping" something like that. plz guide me how can i resolve this issue.
bye

Sonia oracle can not be install on windows xp it can be install on windows 2000.
if u need more help regarding installation on windows 2000 i can provide complete detail. Remember P4 has one problem of java run time which can be correct by replacing the file "symcjit.dll"
Hussain Gul
[email protected]

Similar Messages

  • Unable to install Oracle 11g R2 on Windows 8

    Hi All,
    I know this is a familiar post with quite a few users facing problems while trying to install Oracle 11g R2 on Windows 8 platform. Subsequently, there have been resolutions provided -  Hyperion Error of the Day: Oracle Database 11g Installer Disappears After Prerequisite Checks.
    I am facing a similar problem - the installation window disappears after I select the "Select Class Option" as desktop. I tried following the steps which have been advised, but to no success. I would like to make a point here - The Operating System that I use is - Windows 8 Single Language, which is different from Windows 8 Enterprise Edition. Plus, the java I use is:
    java version "1.7.0_45"
    Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
    Java HotSpot(TM) Client VM (build 24.45-b08, mixed mode, sharing)
    Kindly Help.
    With regards
    Sriram

    Hi,
    The solution provided in this link worked.  Hyperion Error of the Day: Oracle Database 11g Installer Disappears After Prerequisite Checks
    Even though I installed java in c:\java, I got the same error, but calling setup.exe from command prompt and setting the jreLoc path has worked.
    Eg: on command prompt, I gave below command and it worked,
    D:\downloads\database>setup -jreLoc "C:\Java\jdk1.7.0_51"
    D:\downloads\database   -> is path setup.exe location
    Thanks,
    Srikanth

  • Unable to install oracle 10g XE in windows 7

    previously i had installed oracle 10g.but it stopped working.
    so I tried to resolv it by uninstalling it.
    I uninstalled it from control panel.
    but now i am unable to install it again
    it showing an error-
    The install cannot proceed as service OracleServiceXE is present on the system.
    Remove the sevice,reboot the system and retry the installation.
    I have tried reboot the system so many times after uninstall also.
    please give me a solution for this.

    938561 wrote:
    previously i had installed oracle 10g.but it stopped working.
    so I tried to resolv it by uninstalling it.
    I uninstalled it from control panel.
    but now i am unable to install it again
    it showing an error-
    The install cannot proceed as service OracleServiceXE is present on the system.
    Remove the sevice,reboot the system and retry the installation.
    I have tried reboot the system so many times after uninstall also.
    please give me a solution for this.FORMAT C:\

  • Unable to install Oracle Lite 10g on Windows 7 64-bit

    I've tried installing Oracle Lite 10g on my Windows 7 64-bit computer but I get a message saying "JDK is not installed on machine". I even have Java installed on my computer too.
    Any ideas what could be causing the issue?
    Thanks
    Gareth

    Oracle lite 10g is not supported on Windows 7.    The core issue is you are running on an unsupported platform.
    You have may have to go in the docs and figure out what JDKs were supported, i think 1.4 and 1.5. and try
    installing one of those and maybe you can get uninstall to work.   This is just a guess though.
    thanks
    mike

  • Unable to install Oracle 10g R2 on Windows Vista Business

    Specification for my Machine/Laptop- Lenovo SL400
    windows 32-bit
    Windows Vista Business
    Oracle installation fails several times with unknown error.
    Is this a compatibiity issues? Do I need to install other drivers or downgrate to Windows XP Professional?
    Thanks for your help.
    Pankaj Pratim Chanda
    Chennai
    India
    Solved!
    Go to Solution.

    Pankaj
    Which version of oracle have you installed?According to the dcoumentation,
    Do not install Oracle Database on Windows Vista or Windows Server 2008 using the media for Oracle Database 10g Release 2 (10.2) for Microsoft Windows. Do not use the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista or the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista and Microsoft Windows Server 2008 media to install on operating systems other than Windows Vista or Windows Server 2008.
    Oracle Database is supported on Windows Vista with the 10.2.0.3 release. If you used the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista media, then Oracle recommends that you install the 10.2.0.4 patch set. You do not need to use the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista and Microsoft Windows Server 2008 media.
    For new installations on Windows Vista or Windows Server 2008, use the Oracle Database 10g Release 2 (10.2.0.3.0) for Microsoft Windows Vista and Microsoft Windows Server 2008 media. This new software is available in the updated media pack
    More information available here 
    http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#CHDFCIAC
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Unable to install oracle 8 i on windows vista

    Hi all,
    I cannot installed my oracle 8i on my new laptop purchase with windows vista . I do everything but at last the programms are all download on my machine. Perhaps a problem of compatibility perhaps . I am in trouble . Because i need it to updates my datasbefore migrating in the server. What can i do to solve this problem of compatibility with installation. Please help me to fix this problem.
    Thanks, Welcome, user575726

    There is a specific version of Oracle 10g for Windows Vista. I even hear that Oracle 10g XE will work too; however, I have only tried oracle 10g for vista.
    Both Oracle 8i and 9i are unsupported on vista.
    Install Windows XP Pro on your laptop instead of Windows Vista.
    Or, if you need to install 8i or 9i on Vista, may I suggest installing a virtual machine running Windows 2000 or Windows XP on top of Vista. Then in this vm, install Oracle 8i or 9i.
    There is microsoft virtual pc 2007, vmware worktation 6.0, and parallels. I'm not sure if qemu or bochs will work. Note, you must have vista business premium or ultimate to be able to run a virtual machine in it according to the vista end user license.

  • Unable to install Oracle 9.0.1 on Linux RedHat

    Hi,
    I am unable to install Oracle 9.0.1 on Linux RedHat, tried many times. While installing i get following errors-
    "Error in invoking target install of makefile
    /usr/oracle/9.0.1/plsql/lib/ins-plsql.mk"
    "error in invoking target ioracle of makefile
    /usr/oracle/9.0.1/rdbms/lib/ins-rdbms.mk"
    "Error loading native library : libnjni.so"
    Installation halts while configuring Net Confugration Assistant....
    Any workaround ???
    Thanks in advance.

    There are many versions of RedHat. Your post indicates you are using one of them, but your post really does not give a hint as to which one. Funny thing is - different versions have different install requirements.
    I really don't understand why operating system version is such a big secret. Especially since it is logically so critical to installation issue. Even when installing on Windows, the first questions is 'which Windows'.
    You have, of course, followed the suggestions at http://www.puschitz.com and noted the errors and workarounds, have you not.
    Especially about things like packages and versions.

  • Problem after installing Oracle DevSuite 10g on Windows 7 (64-bit)

    Hi All,
    I have successfully installed Oracle DevSuite 10g on Windows 7 -64 bit machine.
    But when I open the existing .rdf file which is having around 3MB file... report builder is getting closed automatically. And the same is working for the .rdf file having just 100 KB file.
    Can anyone please guide me thru?
    Thanks,
    Harish Nunna

    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM AIX on POWER Systems (64-bit) (American English)     General     Oracle Fusion Middleware Family     Apr 8, 2008     2.1 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Oracle Solaris on x86 (32-bit) (American English)     General     Oracle Fusion Middleware Family     Aug 29, 2008     1.6 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM: Linux on POWER Systems (American English)     General     Oracle Fusion Middleware Family     Jul 17, 2008     1.1 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Microsoft Windows Itanium (64-bit) (American English)     General     Oracle Fusion Middleware Family     Jun 3, 2008     2 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP Tru64 UNIX (American English)     General     Oracle Fusion Middleware Family     May 16, 2008     1.7 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Linux Itanium (American English)     General     Oracle Fusion Middleware Family     May 14, 2008     1.6 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM: Linux on System z (American English)     General     Oracle Fusion Middleware Family     Sep 15, 2009     1.5 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Linux x86 (American English)     General     Oracle Fusion Middleware Family     Apr 5, 2008     1.7 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP-UX PA-RISC (64-bit) (American English)     General     Oracle Fusion Middleware Family     Apr 4, 2008     1.9 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP-UX Itanium (American English)     General     Oracle Fusion Middleware Family     Apr 4, 2008     1.6 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Oracle Solaris on SPARC (64-bit) (American English)     General     Oracle Fusion Middleware Family     Mar 8, 2008     1.7 GB
    5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Microsoft Windows (32-bit) (American English)     General     Oracle Fusion Middleware Family     Mar 8, 2008     1.6 GB
    None of these say windows -7 patch. Its only for windows 32 bit.

  • Unable to install Net8 on Dell P4 Windows 2000 machines

    We are unable to install Oracle 8i on our new Dell P4 Windows 2000 machines. The error comes from jrew.exe.
    The following is the error messages that appears when trying to configure Net8 on these machines:
    java.lang.ExceptionInInitializerError
         at oracle.ewt.UIManager._loadUserProperties(Unknown Source)
         at oracle.ewt.UIManager._initialize(Compiled Code)
         at oracle.ewt.UIManager._maybeInitialize(Unknown Source)
         at oracle.ewt.UIManager.getLookAndFeel(Unknown Source)
         at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
         at oracle.net.ca.NetCA.<init>(NetCA.java)
         at oracle.net.ca.NetCA.main(NetCA.java)
    Exception in thread "main"
    This is the detail for Net8 Configuration Assistant message.
    Any help is appreciated.
    Thanks
    Mike

    There is a KB on the web that explains how to get over this problem and the reference number for this is 2U6ETM44
    I have also attached a copy of MSIBlast to make your life doing this a little easier.
    Good luck, and hope this helps
    Attachments:
    msiBlast.exe ‏232 KB

  • Unable to install oracle 9i (64) on server 2003 (64)

    unable to install oracle 9i (64) on server 2003 (64) :
    " setup is valid but to enother type machine"
    (proc INTEL XEOM)

    I have downloaded this version:
    http://www.oracle.com/technology/software/products/oracle9i/htdocs/win64soft.html
    Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition
    for Windows XP 2003/Windows Server 2003 (64-bit)
    There is nothin to read about "just for itanium". Pls can u give me a link (or metalink ID) where u got your informations? Is it possible to run 9i 32bit on Win2k3 Enterprise 64bit?

  • Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

    HI,
    I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
    Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
    Setup is unable to proceed due to the following error(s):
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Regards
    Anil Kumar

    You really need to do what error is suggesting.
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Nosh Mernacaj, Identity Management Specialist

  • Error while installing Oracle Apps R12 , on windows server 2003 R2

    Hi Experts
    While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
    System Utilities
    command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
    'E:\oracle' is not recognized as an internal or external command,
    operable program or batch file.
    RW-50011: Error: - System Utilities Availability test has returned an error: 1
    ======================================================================================================================================================================================================================================================================
    File Space Check :
    -- database node space checks --
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
    required = 5600.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    Database System File Directory = F:\oracle\VIS\db\apps_st\data
    required = 20200.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    Database Log File Directory = F:\oracle\VIS\db\apps_st\data
    required = 950.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
    required = 103350.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
    required = 64500.0
    actual = 0.0
    -- apps node space checks --
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    APPL_TOP = E:\apps\VIS\apps\apps_st\appl
    required = 5800.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
    required = 2800.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
    required = 8400.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
    required = 3100.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
    required = 3200.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
    required = 1400.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
    required = 1400.0
    actual = 0.0
    RW-20012: Error: - Free disk space on system returns zero:
         probable cause - mount point does not exist.
    RW-20013: Error: - Not enough free disk space on system:
    Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
    required = 1024.0
    actual = 0.0
    waiting for expert suggestion.
    Thanks
    Rahul Srivastava

    Hi Hussein
    after changing the directory name as Stage12, I am getting error
    File Space Check :
    -- database node space checks --
    Disk space on system acceptable:
    Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
    required = 5600.0
    actual = 200473.43359375
    Disk space on system acceptable:
    Database System File Directory = F:\oracle\VIS\db\apps_st\data
    required = 20200.0
    actual = 194873.43359375
    Disk space on system acceptable:
    Database Log File Directory = F:\oracle\VIS\db\apps_st\data
    required = 950.0
    actual = 174673.43359375
    Disk space on system acceptable:
    Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
    required = 103350.0
    actual = 173723.43359375
    Disk space on system acceptable:
    Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
    required = 64500.0
    actual = 70373.43359375
    -- apps node space checks --
    Disk space on system acceptable:
    APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
    required = 5800.0
    actual = 5873.43359375
    RW-20013: Error: - Not enough free disk space on system:
    APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
    required = 2800.0
    actual = 73.43359375
    RW-20013: Error: - Not enough free disk space on system:
    APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
    required = 8400.0
    actual = 73.43359375
    RW-20013: Error: - Not enough free disk space on system:
    APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
    required = 3100.0
    actual = 73.43359375
    RW-20013: Error: - Not enough free disk space on system:
    COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
    required = 3200.0
    actual = 73.43359375
    RW-20013: Error: - Not enough free disk space on system:
    Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
    required = 1400.0
    actual = 73.43359375
    RW-20013: Error: - Not enough free disk space on system:
    Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
    required = 1400.0
    actual = 73.43359375
    RW-20013: Error: - Not enough free disk space on system:
    Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
    required = 1024.0
    actual = 73.43359375
    also for
    System Utilities
    command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
    E:\Stage12\startCD\Disk1\rapidwiz>echo off
    /cygdrive/c/WINDOWS/system32/cmd
    'which' command is available.
    /usr/bin/gnumake
    'gnumake' is available.
    'cl' is not available.
    ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
    which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
    RW-50011: Error: - System Utilities Availability test has returned an error: 1
    Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
    Thanks
    Rahul Srivastava

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Unable to Install Crystal Reports 2008 on Windows 7 64 bit

    Hi,
       I am unable to install Crystal Reports 2008 on Windows 7 64 bit laptop. Is this not supported?
    BR, Nanda Kishore

    i INSTALLED NOW

  • Unable to install C4500 HP printer on Windows 7

    unable to install C4500 HP printer on Windows 7 - printer installation disc only supported by xp and vista.  What do I need to do??
    This question was solved.
    View Solution.

    Hi,
    You may download the Windows7 compatible software below:
    http://ftp.hp.com/pub/softlib/software11/COL30130/mp-74912-1/PS_AIO_04_C4500_USW_Full_Win_WW_130_140...
    Make sure the USB cable is unplug before performing the installation.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • New To Apple -MacBookPro-Safari v IE

    I am new to Apple. I have just purchased a MacBook Pro and am having trouble migrating from the Windows Internet Explorer environment. I did multiple "searches" on my questions and found nothing. In IE's set up you had "Favorites" where you could pla

  • Page properties don't show in IE or Firefox

    Hi Guys, I'm very new to this so sorry if I come across as a bit of a numpty.. I have built a site, and uploaded it to the net via my ftp server. I went back to dreamweaver to change a few of the page properties such as link colours and background im

  • Problem in downloading records .txt format

    Hi, I have to download records in a .txt file from two custom tables(Header and Item table) while the header records and item records are identified by the first two characters of each string downloaded in the .txt file. Can you help me out by giving

  • How to detect SQL type to avoid SQL injection

    Hi, I work in a gsm company and we develop a program to make trend analysis. Users of this program know how to write SQL statements. I want them to write specific sql statements as input statement of my program (SELECT ... from ...). Mostly SELECT st

  • Where are Hierarchy node names stored in BW?

    When I enter hierarchy view of an infoobjects master data, I can see a field called node name. If I want to use that as filter criteria, where do I go to find that? Where is it stored?