Unable To Install Oracle9i Lite on Solaris 8

I installed all fo the components in the /opt/oracle directory just
fine and everything appears to be working, however after the installation
is complete, it just asks me if I want to install it again and returns a code
of 1. It never asks me for a schema or password. Please help, I'm somewhat
of a newbie!
Thank you,
David Z. Kil

Hi,
chaeck the following:
1)is tnslisner is running? either by tnsping or by ps command.
2) chacke ps -ef |grep oracle or ps -ef |grep pmon
3) open a telnet window and try to login using sys/change_on_install@SID or system/manageR@SID or scott/tigher@SID.
give the answers of questions above.
Yogi
[email protected]

Similar Messages

Unable to install Oracle Lite 10g on Windows 7 64-bit

I've tried installing Oracle Lite 10g on my Windows 7 64-bit computer but I get a message saying "JDK is not installed on machine". I even have Java installed on my computer too.
Any ideas what could be causing the issue?
Thanks
Gareth

Oracle lite 10g is not supported on Windows 7. The core issue is you are running on an unsupported platform.
You have may have to go in the docs and figure out what JDKs were supported, i think 1.4 and 1.5. and try
installing one of those and maybe you can get uninstall to work. This is just a guess though.
thanks
mike

Unable to install SUN SMC on solaris 10

Hi,
I am trying to install SMC on solaris 10. es-guisetup is giving errors as given below:
smcdatabase service is always in maintenance mode.
I am running postgres on 5433 port.
Please help me in this regard.
Here is the log file:
# cat core-db-setup_rtisifldhdesk.100929090636.6642
Started /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh at Wed Sep 29 09:06:36 EDT 2010.
Running on SunOS rtisifldhdesk 5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210.
-sh: initdb: not found
bash-3.00# cat gui_setup_rtisifldhdesk.100929090557
The system memory to be compared has mapped to : 8192
Skipping the Disable SNMP panel as a port other than 161 is specified as the agent port
The web server organization is given as : ADP
The web server location is given as : njjjjj
The Setup script will be executed as : /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh
stty: : Invalid argument
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot create
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/postgresql.conf: cannot create
SYMON_JAVAHOME is set to: /usr/java
JDK version is: "1.5.0_22-b03"
This script will help you to setup Sun Management Center 4.0.
Following layer[s] are installed:SERVER,AGENT
None of the layers is setup.
Following layer[s] will get setup: SERVER,AGENT
Database will be setup.
Following Addon[s] are installed:
Advanced System Monitoring,ELP Config-Reader Monitoring,Desktop,Service Availability Manager,Sun Fire Entry-Level Midrange System,Netra,DomMonit SPARC Enterprise Mx000,Dom DR SPARC Enterprise Mx000,PltAdmin SPARC Enterprise Mx000,Performance Reporting Manager,Solaris Container Manager,Sun Fire Midrange Systems Domain Administration,Dynamic Reconfiguration for Sun Fire High-End and Midrange Systems,Sun Fire Midrange Systems Platform Administration,Starfire Monitoring,Sun Fire High-End Systems Monitoring,Sun Enterprise 6500-3500 Servers/sun4d DR,Sun Enterprise 6500-3500 Servers/sun4d Config Reader,System Reliability Manager,Workgroup Server,Generic X86/X64 Config Reader.
Checking memory available...
Configuring Sun Management Center DB...
The Port 5433 for Sun Management Center DB has already been used.
Enter another port for Sun Management Center DB listener : : 2521
Initializing SunMC database.
disabled sunmcdatabase service from maintenance state during setup
check the smf database service log to know the reason
Failed to enable service sunmc-database
Database setup failed : db-start failed
Updating registry...
None of the base layers are setup.
No Addon is setup.
Following Addons are not yet setup: Advanced System Monitoring,ELP Config-Reader Monitoring,Desktop,Service Availability Manager,Sun Fire Entry-Level Midrange System,Netra,DomMonit SPARC Enterprise Mx000,Dom DR SPARC Enterprise Mx000,PltAdmin SPARC Enterprise Mx000,Performance Reporting Manager,Solaris Container Manager,Sun Fire Midrange Systems Domain Administration,Dynamic Reconfiguration for Sun Fire High-End and Midrange Systems,Sun Fire Midrange Systems Platform Administration,Starfire Monitoring,Sun Fire High-End Systems Monitoring,Sun Enterprise 6500-3500 Servers/sun4d DR,Sun Enterprise 6500-3500 Servers/sun4d Config Reader,System Reliability Manager,Workgroup Server,Generic X86/X64 Config Reader
Could not finish requested task.
Thanks
Sugunakar

Hi Sugunakar,
There are a few small things I can think of checking:
I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
Regards,
[email protected]

Unable to Install oracle lite 10g mobile server on windows

Hi all,
Basically I am a .net developer, i want to explore Oracle Lite 10g mobile database.
for that I am trying to install Olite 10g Mobile server on my windows system it is installing upto 95%, after that nothing is happening. it is not giving any error message.
even i waited for 5 to 6 hours then also it is at the same stage.
In my sytem JDK 5.0 is there and Oracle Database 10g Express edition is also there.
Please help me on this issue.

i know that this might be silly but have you checked the guide for the installation and made sure you have all the preq?
please check
http://download.oracle.com/docs/cd/E12095_01/nav/portal_booklist.htm
please check the getting started guide and especially chapters
3 Requirements Before Installation or Development
4 Installation of Oracle Database Lite
i have seen that it says:
3.3.2 Certified Oracle RDBMS to Use With Oracle Database Lite
Use one of the following database versions with Oracle Database Lite: Oracle 9.2, Oracle 10g Release 1 (10.1.0), Oracle 10g Release 2 (10.2.0), or Oracle 11g.
i dont know if the express edition is supported correctly.

Installing oracle9i on solaris 10 but the installer cannot execute

I was trying to install oracle9i.2 on solaris 10 but the installer cannot execute. Here is the exact error returned by the system " ./runInstaller: ./runInstaller: cannot execute. Can somebody help me out

Did you check the file execute properties?
oracle@test:/.../oracle/../..>ll runInstaller
-rwxrwxr-x 1 oracle dba 45056 Jul 27 2003 runInstaller If they are not set so, then I think you uncompressed the files with wrong flag, or for example uncompressed the cpio.gz on windows and FTPed it to unix..
Regards,
Yoann.

Installing Oracle 9i in Solaris 10

Hi
I have a server having OS Solaris 10 SPARC Edition 64 bit. I want to install Oracle 9i client in that server. I have seen in many forums ppl saying that Oracle 9i is not compatible with Solaris 10 and there are some issues related to patches.
Can anyone help me in this matter.
Thanks and Regards
Abhishek Verma

Thanks for your replies guys.
I successfully installed Oracle9i client in Solaris 10. Initially I had to set up the Kernel parameteres as Prajeevan has suggested. Later the installation was quite staright forward and same as for Linux server.
Thanks for giving your precious time for replying to my query.

Installing Korean locale in solaris 10

Hi
I have installed solaris10 in my sparc processor machine. Now i have to install korean locale in that OS.
So pl. let me know the steps to install korean locale in an installed solaris 10 machine.
Waiting for your valuable response.

Thanks for your replies guys.
I successfully installed Oracle9i client in Solaris 10. Initially I had to set up the Kernel parameteres as Prajeevan has suggested. Later the installation was quite staright forward and same as for Linux server.
Thanks for giving your precious time for replying to my query.

Unable to install a Solaris OS in a Single disk slice

Hi,
We are unable to install the Solaris-OS on a single slice disk.
We found that, only "Solaris 10 10/08 (U6)" release can support the single slice disk installation, prior release are not. Is it true ?
We found it from "LDoms Community Cookbook " , from given link
http://wikis.sun.com/display/SolarisLogicalDomains/Section+2+-VirtualDevices
Paragraph is
" Before Solaris 10 10/08 (U6), when a backend is exported to a domain as a single slice disk, it will appear in that domain as a disk with a single partition (s0). Such a disk is not visible with the format(1m) command and its partition table can not be changed. A single slice disk will not be visible from the Solaris installer and can not be select as a disk device on which Solaris can be installed. "
Our Configuration are
sc> showhost
System Firmware 6.6.4 Sun Blade[TM] T6300 2008/07/01 02:03
Host flash versions:
OBP 4.28.9 2008/06/30 21:26
Hypervisor 1.6.4 2008/06/06 04:57
Sun Blade T6300 Server Module POST 4.28.6 2008/05/23 12:35
-bash-3.00# cat /etc/release
Solaris 10 8/07 s10s_u4wos_12b SPARC
Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 August 2007
We Installed a 127127-11 patch also.
-bash-3.00# ldm -V
Logical Domain Manager (v 1.0.3)
Hypervisor control protocol v 1.1
Using Hypervisor MD v 1.1
System PROM:
Hypervisor v. 1.6.4 @(#)Hypervisor 1.6.4 2008/06/06 04:57\015
OpenBoot v. 4.28.9 @(#)OBP 4.28.9 2008/06/30 21:26
Use below command to add single slice disk
*# ldm add-vdsdev options=slice /dev/dsk/c0t1d0s3 vol3@primary-vds0*
Getting error in between installation,
ERROR: No disks found
- Check to make sure disks are cabled and powered up
Please help us to, resolve this issue. Thanks a lot.
Best Regards,
Parvez Memon.

Hi,
Whenever i try to installed the patch 137137-09, it required a below patch
0 For patch 137137-09, required patch 138866-01 does not exist.
And try this then
# patchadd 138866-01
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 138866-01 are installed on the system.
No patches to install.
I am not able to install this patch 138866-01, even i try with 138866-02 but not success.
Thanks for your reply, please help to resovle the same.
Regards,
Parvz Memon

Fail to install Oracle9i on Solaris

Hi,
I am a green hand for Solaris. When I tried to install oracle9i on Solaris, it says 'no enough disk space'. However, the hard disk of that machine is 72G. Can anybody tell me how to enlarge the available disk for Oracle9i installer? Thank you very much in advance!
BR/Shirley

Hi,
maybe the available space on your physical harddisk(s) is 72G. But normally disks consist of logical units, the mount points. The Unix command df-k shows the existing mount points and their allocated space. So it is possible, that the mount point, you are installing to, has not enough space. Another reason for a failing installation could be, the temp directory (normally /tmp) has not enough space.
Werner

Unable to install SAP Netweaver 2004s in Solaris x64

I am trying to install SAP Net2004s in solaris x64 and it has JDK1.6.
For some reason the SAPINST keeps giving error "JDK version 1.5.0 and above is not supported by SAP.
I downloaded and installed j2sdk1.4.2_24_b06 as per note 716604.
Created environment variable as
export JAVA_HOME=/opt/j2sdk1.4.2_24
export PATH=$PATH:$JAVA_HOME/bin
export SAPINST_JRE_HOME=opt/j2sdk1.4.2_24
now if i execute java -version, again it is showing as Jdk1.6
which java
/usr/bin/java
i am able to execute xclock.
I renamed the softlink in /usr/java to java.old and created new one as /usr/java pointed to /opt/j2sdk1.4.2_24
after this if i execute java -version, it gives an error "Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object"
Now i checked the java executables, it is located in /opt/j2sdk1.4.2_24/bin/amd64/ (all java executables)
Now i set the env PATH /opt/j2sdk1.4.2_24/bin/amd64 before the variable /ur/bin/java
I tried creating env as "export PATH=$PATH:$JAVA_HOME/bin/amd64". But no luck.
I would really appreciate if someone could help me to pass through this error.
Thanks in advance.

install a fresh JDK just need 64 bit version
and set the environment variables accordingly,
i did install java64bit and out put java -version is j2sdk1.4.2_24 64bit
created env
export JAVA_HOME=/opt/j2dsk1.4.2_24
export PATH=$JAVA_HOME/bin:$PATH
export SAPINST_JRE_HOME=/opt/j2dsk1.4.2_24
export DISPLAY=XXX:0.0
able to execute xclock
But got the same error when i try to execute ./sapinst
error "GUI not Connected......."
i wonder that in java 64 bit,the executables are located in /opt/j2sdk1.4.2_24/bin/amd64/(all java executables)
but when we execute ./sapinst, it shows as it is searching the executables in /opt/j2sdk1.4.2_24/bin
i don't know if that matters.
but just want to let you know that, i was able to get the sapinst gui, when pointing to java1.6 version, but unfortunatly sap won't support above java1.5.
path of java1.6 executables - /usr/jdk/jdk1.6../bin/(all java executables)
Please help me resolving this issue.

Unable to install Solaris Express Community Edition

I have had a certain amount of success installing opensolaris and then solaris 10. Ultimately through the advice of LQ members I choose to install the Solaris Community Express Edition.
It fails miserably by looping displaying the following message...I have had a certain amount of success installing opensolaris and then solaris 10. Ultimately through the advice of LQ members I choose to install the Solaris Community Express Edition.
It fails miserably by looping displaying the following message...
WARNING: /pci@0,0/pci-ide@14,1/ide@0 (ata0):
timeout: abort request, target=1 lun=0
WARNING: /pci@0,0/pci-ide@14,1/ide@0 (ata0):
timeout: abort device, target=1 lun=0
WARNING: /pci@0,0/pci-ide@14,1/ide@0 (ata0):
timeout: reset target, target=1 lun=0
WARNING: /pci@0,0/pci-ide@14,1/ide@0 (ata0):
timeout: reset bus, target=1 lun=0
WARNING: /pci@0,0/pci-ide@14,1/ide@0 (ata0):
timeout: early timeout, target=1 lun=0
WARNING: /pci@0,0/pci-ide@14,1/ide@0/cmdk@1,0 (Disk1):
Error for command 'read sector' Error Level: Informational
Sense Key: aborted command
Vendor 'Gen-ATA ' error code: 0x3It first of all loops a couple of times and then I can choose which console to start...then it loops again with the same message...
Before coming up with the message
Using install cd in /dev/dsk/c1t0d0p0
Using RPC for network configuration parameters
The install then breaks into a never ending loop displaying the above WARNING: /pci@0,0/pci-ide@14,1/ide@0/cmdk@1,0 (Disk1): message and its follow ons continuously.
Now when I had Solaris 10 installed during normal boot, this message was displayed on the console, but the boot sequence continued.
Anyone seen this before and what does it mean. Does the installation process not like the fact that I have a NTFS partition on the first disk.

there is a german article how to fix the bios on that hba:
http://www.administrator.de/index.php?content=4cbb72a3b4f407f86caaca24d0fd2d7b#68542
only problem is one needs the seeprom dumped from a non-dell card of that type. after that it is possible to flash the adaptec firmware. so if anyone has a 39320 hba and is willing to dump the seeprom using the scsiutil.exe that would help very much...

Unable to install db2 on solaris system

Dear Experts
I am planning to install sap on sun solaris sparc system. I have download the db2 dvd from the market place (51036149_4). when i try to execute the db2setup it's throwing error db2setup cannot execute. i have full permission for the rolder. but still i am getting the error.
Please help me resolve the issue.
Thanks & Regards

Please copy and paste what you are doing.
Markus

Unable to install Sun Java System MAPI Service Providers

I tried to install the outlook connector for Outlook 2003. I've got the following error message. It said that Unable to install Sun Java System MAPI Service Providers. I am using Windows 2000 SP3 platform
--- 2005/06/22 11:41 ---
11:41:26 [5365] Outlook version is 11.0.6359.0.
11:41:26 ERROR: [5501] Unable to find MAPI directory.
11:41:26 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:26 [5475] TMP directory is 'C:\DOCUME~1\admin\LOCALS~1\Temp'.
11:41:28 [5362] Checking Windows version.
11:41:28 [5363] Windows version is 5.0.
11:41:28 [5364] Checking Outlook version.
11:41:28 [5509] Checking default mail client.
11:41:28 [5508] Default mail client is 'Microsoft Outlook'.
11:41:28 [5178] Verifying that Outlook is not running.
11:41:28 [5179] Trying to login to shared session.
11:41:29 ERROR: [5501] Unable to find MAPI directory.
11:41:29 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:29 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
11:41:29 ERROR: [5501] Unable to find MAPI directory.
11:41:29 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:31 ERROR: [5351] Unable to install Sun Java System MAPI Service Providers.
11:41:31 ERROR: Unable to install Sun Java System MAPI Service Providers.
Anyone can help for this? Thanks

I have used this method, but the dog gone service does not return a started status. It just keeps saying starting even after the service starts.
Download sc.exe from ftp://ftp.microsoft.com/reskit/win2000/sc.zip and copy
it to system32
Open a command line, change to C:\Sun\AppServer\lib and run:
C:\winnt\system32\sc.exe create SJdomain1 binPath=
"C:\Sun\AppServer\lib\appservService.exe
\"C:\Sun\AppServer\bin\asadmin-pause.bat start-domain domain1\"
\"C:\Sun\AppServer\bin\asadmin-pause.bat stop-domain domain1\"" start= auto
DisplayName= "SunJava domain1"
1. I'm no fan of windows and I prefer Solaris or Linux
2. Windows should have this tool as a part of the OS so I don't have to go hunt for it
3. I guess this solution is better than no solution at all :)

K618i pre-installed flash lite

Hai everyone, plz help me on this issue..
i just bought a k618i, and on the sonyericsson website said
that it supports macromedia flash lite..
but when i send the .swf file to the phone using bluetooth,
the phone doesn't recognize the file
i know that most SE phones use browsers to play the .swf
file...
Does k618i have a pre-installed flash lite??

Unable means 'Not working'. The video as well as audio. Flash Player was not working.
However, the issue has been resolved automatically. I think the process of Upgrade to 8.1 from 8 has interfered with the player OR during upgrade the inconsistency, if any, has been removed by the system during Set UP repairing the damage, if any. Not sure.
One more thing I would like to add here is that it would be better not to run HD Video. If already downloaded, better use 'Auto' setting for viewing. After completion of upgrading, although FP was working, it gave me little trouble and Auto settings solve the issue. Further, it is better not to run Flash Auto stopper, I have kept that disabled and now everything is fine. Thank you.

Unable to send out mails from Solaris 10 Server

We are in the process of migrating all our Solaris 8 servers to Solaris 10 servers. I have installed core distribution of Solaris 10 with only ssh running and few additional packages such as SUNWntp etc. which do not come with Core. I do not want to run sendmail daemon, but be able to send out emails from this host. I tried adding smart host DS entry in /etc/mail/sendmail.cf - I tried both hand editing of this file and compiling a new one to hardcode smarthost entry -. But mailing works only when sendmail daemon is running otherwise, I am unable to sendout mails. Can you please share your knowledge to resolve this issue.
Thanks,
Karthik

I use /etc/mail/aliases file and I do not run sendmail on any of my servers.
I have an entry for root aliased to <my.email.address>,<my.coworker.email.address> so any system messages are sent to us at our corp email addresses. Our servers are setup to use corporate DNS which includes entries for corp. mail servers.
HTH
John
Edited by: SolarisSAinPA on Apr 2, 2008 2:02 PM
This method worked for Solaris8. I'm having somedifficulty making it work for Solaris10. We have no mailhost definition in DNS, so I'm not sure if that is why this does not work or is there something specific to Solaris10 that prevents me from using the method I describe earlier.
If I caused you extra work/confusion because of my earlier post, my apologies.
John

Unable To Install Oracle9i Lite on Solaris 8

Similar Messages

Maybe you are looking for