Unable to install Oraclei 8.1.7 on P4 machine
I am unable to install the above version of Oracle on a IBM P4 machine with 256 MB RAM.
Got the following message while installing:
JRE was not found at:
d:\software\Oracle8i\stage\components\Oracle.swd.jre/1.1.7.24/1/Datafiles/Expanded/jre\win32\bin\jrew.exe
Install jre 1.1.7 or above and continue.
After getting the above message, I installed jre 1.1.8_09.
Inspite of this, the installation is not commencing.
The documentation is silent of this. However, it does mention that that it may possibly happen with a Novell Netware system due to the filenames being restricted to 8 characters.
I did try this out to and named the installation directory of jre with 8 characters. But the problem still persists.
Looking forward to a solution from some Oracle gurus.
Thanks in advance.
Girish
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the post-install
configuration tools will also be affected. Running these tools with "-nojit"
specified will avoid the hang, but it is not simple to specify "-nojit" for
some of the products.
The following workaround works for the Windows operating system:
a. Copy only the install directory from the CD to the hard disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications (Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard drive (i.e.
e:\temp\install\win32\setup.exe). This will use the modified
oraparam.ini and pick up the information from the CD since the absolute
locations are specified.
Choose a Custom install and choose not to create a database during the
install. This way, the Database Configuration Assistant will not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and there is no way
to suppress it. You will need to kill the Net8 Configuration Assistant if it
hangs due to the bug. The installation still will have been successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8 Configuration
Assistant" and click "Stop". If that does not work, look for the most recent
JRE process using the Task Manager, and kill it manually. NOTE: the OUI
itself will also have a jre process. Be sure to kill the one with the most
recent date, which should be the jre process being used for Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through the installation
to the "End of Installation" screen, you should modify the configuration tools
to use "-nojit", then call the appropriate tools from the Start Menu.
Once installation is complete, each of the following files in the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit -classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from the Start Menu.
Similar Messages
-
Unable to install Net8 on Dell P4 Windows 2000 machines
We are unable to install Oracle 8i on our new Dell P4 Windows 2000 machines. The error comes from jrew.exe.
The following is the error messages that appears when trying to configure Net8 on these machines:
java.lang.ExceptionInInitializerError
at oracle.ewt.UIManager._loadUserProperties(Unknown Source)
at oracle.ewt.UIManager._initialize(Compiled Code)
at oracle.ewt.UIManager._maybeInitialize(Unknown Source)
at oracle.ewt.UIManager.getLookAndFeel(Unknown Source)
at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(NetCA.java)
at oracle.net.ca.NetCA.main(NetCA.java)
Exception in thread "main"
This is the detail for Net8 Configuration Assistant message.
Any help is appreciated.
Thanks
MikeThere is a KB on the web that explains how to get over this problem and the reference number for this is 2U6ETM44
I have also attached a copy of MSIBlast to make your life doing this a little easier.
Good luck, and hope this helps
Attachments:
msiBlast.exe 232 KB -
Unable to install SQL Express 2005 on W7 Pro machine
I am trying load a Toshiba Telecom application on a W7 Pro 64bit machine. The application has SQL Express 2005 embedded and will not install completely. I downloaded the SQL Express 2005 SP3 from MS and it comes up during the installation and states
that the PC does not have the proper hardware requirements and that it cannot install because of the wrong ASP file. The machine is an i7 with 16GB ram and 1.7TB hard drive. Can anyone help? I have the same application loaded on other W7 Pro machines with
no problem.Hi Patriot76,
According to your description, you fail to install SQL Server 2005 express SP3. Please help to post the complete setup error log here for analysis. By default, SQL Server setup log file locates in C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Log.
In addition, please confirm if your SQL Server is installed successfully.
For the hardware requirements, please make sure that your disk has at least 600 MB of available hard disk space. To install SQL Server 2005 express SP3 successfully, please pay attention to the points below.
1.Make sure that you have administrative rights on the computer.
2.Make sure that Microsoft .NET Framework 2.0 or later is installed. If you do not have the .NET Framework 2.0 installed, you must download and install it before you install SP3.
3.Make sure that you install 64-bit SQLEXPR.EXE based on your 64-bit operation system.
4.Make sure that you stop all applications and services that make connections before you install SP3.
Regards,
Michelle Li -
Unable to install OIM:Newbie
Hi Experts,
I am a newbie & unable to install OIM successfully in my Win xp machine at home. I am just following the link:
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/install/installoim.htm.
I come to the step :Installing the Oracle Identity Manager Server, I get the following message:
"OIM application server set up has some problem:Refer to E:\oracle\oim_server\xellerate\logs\setup-jboss.profile log for more info"
copy E:\oracle\oim_server\xellerate\DDTemplates\DO\jboss.xml omitted as E:\oracle\oim_server\xellerate\WORK\META-INF\jboss.xml is up to date.
jar META-INF\ejb-jar.xml added as META-INF/ejb-jar.xml is outdated.
jar META-INF\jboss.xml added as META-INF/jboss.xml is outdated.
jar Updating jar: E:\oracle\oim_server\xellerate\lib\xlDataObjectBeans.jar
jar adding directory META-INF/
jar adding entry META-INF/MANIFEST.MF
jar adding entry META-INF/ejb-jar.xml
jar adding entry META-INF/jboss.xml
jar adding directory com/
jar adding directory com/thortech/
jar adding directory com/thortech/xl/
jar adding directory com/thortech/xl/ejb/
jar adding directory com/thortech/xl/ejb/interfaces/
jar adding entry com/thortech/xl/ejb/interfaces/tcSPDHome.class
jar adding entry com/thortech/xl/ejb/interfaces/tcRequestOperationsHome.class
jar adding entry com/thortech/xl/ejb/interfaces/tcOQE.class
jar adding directory com/thortech/xl/ejb/databeansimpl/
jar adding entry com/thortech/xl/ejb/databeansimpl/tcSDPBean.class
jar adding entry com/thortech/xl/ejb/interfaces/tcTIMHome.class
jar adding entry com/thortech/xl/ejb/databeansimpl/tcUSGBean.class
jar adding directory com/thortech/xl/ejb/beans/
jar adding entry com/thortech/xl/ejb/beans/tcOUGSession.class
jar adding entry com/thortech/xl/ejb/interfaces/tcQUGUtil.class
jar adding entry com/thortech/xl/ejb/interfaces/tcUserOperationsUtil.class
jar adding entry com/thortech/xl/ejb/interfaces/tcITResourceDefinitionOperationsLocal.class
jar adding entry com/thortech/xl/ejb/interfaces/tcRQU.class
jar adding entry com/thortech/xl/ejb/beans/tcPropertyOperationsSession.class
jar adding entry com/thortech/xl/ejb/beans/tcObjectSession.class
jar adding entry com/thortech/xl/ejb/interfaces/tcPKG.class
jar adding entry com/thortech/xl/ejb/interfaces/tcOBA.class
jar adding entry com/thortech/xl/ejb/interfaces/tcLookupOperationsLocalHome.class
jar adding entry com/thortech/xl/ejb/databeansimpl/tcRequestObjectBean.class
jar adding entry com/thortech/xl/ejb/interfaces/tcADT.class
jar adding entry com/thortech/xl/ejb/interfaces/tcPropertyOperationsLocal.class
jar adding entry com/thortech/xl/ejb/interfaces/tcSELHome.class
jar adding entry com/thortech/xl/ejb/interfaces/tcReconciliationOperations.class
jar adding entry com/thortech/xl/ejb/interfaces/tcSPD.class
jar adding entry com/thortech/xl/ejb/interfaces/tcSGK.class
jar adding entry com/thortech/xl/ejb/interfaces/tcEMD.class
jar adding entry com/thortech/xl/ejb/interfaces/tcADS.class
jar adding entry com/thortech/xl/ejb/beans/tcPasswordUtilitiesSession.class
jar adding entry com/thortech/xl/ejb/databeansimpl/tcMAVBean.class
jar adding entry com/thortech/xl/ejb/beans/tcSELSession.class
jar adding entry com/thortech/xl/ejb/interfaces/tcRQCHome.class
jar adding entry com/thortech/xl/ejb/interfaces/tcRCAHome.class
jar adding entry com/thortech/xl/ejb/interfaces/tcLocationOperationsHome.class
jar adding entry com/thortech/xl/ejb/interfaces/tcMSGUtil.class
BUILD FAILED
file:E:/oracle/oim_server/xellerate/setup/jboss-setup.xml:243: taskdef class org.apache.jasper.JspC cannot be found
at org.apache.tools.ant.taskdefs.Definer.addDefinition(Definer.java:236)
at org.apache.tools.ant.taskdefs.Definer.execute(Definer.java:162)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:397)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:397)
at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:143)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:397)
at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:143)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.Project.executeTargets(Project.java:1255)
at org.apache.tools.ant.Main.runBuild(Main.java:609)
at org.apache.tools.ant.Main.start(Main.java:196)
at org.apache.tools.ant.Main.main(Main.java:235)
Caused by: java.lang.ClassNotFoundException: org.apache.jasper.JspC
at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1075)
at org.apache.tools.ant.AntClassLoader.findClass(AntClassLoader.java:1036)
at org.apache.tools.ant.AntClassLoader.loadClass(AntClassLoader.java:925)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at org.apache.tools.ant.taskdefs.Definer.addDefinition(Definer.java:230)
... 26 more
--- Nested Exception ---
java.lang.ClassNotFoundException: org.apache.jasper.JspC
at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1075)
at org.apache.tools.ant.AntClassLoader.findClass(AntClassLoader.java:1036)
at org.apache.tools.ant.AntClassLoader.loadClass(AntClassLoader.java:925)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at org.apache.tools.ant.taskdefs.Definer.addDefinition(Definer.java:230)
at org.apache.tools.ant.taskdefs.Definer.execute(Definer.java:162)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:397)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:397)
at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:143)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:397)
at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:143)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.Project.executeTargets(Project.java:1255)
at org.apache.tools.ant.Main.runBuild(Main.java:609)
at org.apache.tools.ant.Main.start(Main.java:196)
at org.apache.tools.ant.Main.main(Main.java:235)
1) Is there any problem in my Jboss version? i currently downloaded jboss4-0.2 & JDK 1.4.2_12
..Also is it bcoz I am using Win xp and not Win2003?
2) Also I am unable to access any of the consoles:Jboss Admin Console,Diagnostic Dashboard & OIM Admin console even though I can access OEM console.
Please advice as I am unable to go further.
Thanks & Regards
sundas7Hi Daniel & Experts,
Sorry for the late reply.With the forum's help, I am slowly progressing in OIM's installation but still haven't explored other areas:-)
Yes,as adviced, I tried reinstalling the Jboss version 4.2.3 G.A & JDK 1.6.0.18(I cud not find 1.6.0.10).and now able to install the OIM(9.1.0.1) server successfully now.Thanks for the same.
However I am unable to login to the Webconsole. I tried xelsysadm & xelsysadm and some other combinations
(oimuser & abcd1234) I guess firts time we should only use xelsysadm & xelsysadm???
I get the same message mentioned below:
Thank you for using Oracle Identity Manager.
You are now logged out.
Where am I going wrong??Could not find much in Jboss server logs related to Authentication:
=========================================
10:12:22,671 ERROR [JAVACLIENT] Class/Method: tcDataBaseClient/getInterface enco
unter some problems: null; nested exception is:
java.lang.IllegalStateException: [com.arjuna.ats.internal.jta.transactio
n.arjunacore.inactive] [com.arjuna.ats.internal.jta.transaction.arjunacore.inact
ive] The transaction is not active!; - nested throwable: (java.lang.IllegalState
Exception: [com.arjuna.ats.internal.jta.transaction.arjunacore.inactive] [com.ar
juna.ats.internal.jta.transaction.arjunacore.inactive] The transaction is not ac
tive!)
org.jboss.tm.JBossTransactionRolledbackException: null; nested exception is:
java.lang.IllegalStateException: [com.arjuna.ats.internal.jta.transactio
n.arjunacore.inactive] [com.arjuna.ats.internal.jta.transaction.arjunacore.inact
ive] The transaction is not active!; - nested throwable: (java.lang.IllegalState
Exception: [com.arjuna.ats.internal.jta.transaction.arjunacore.inactive] [com.ar
juna.ats.internal.jta.transaction.arjunacore.inactive] The transaction is not ac
tive!)
at org.jboss.ejb.plugins.TxInterceptorCMT.throwJBossException(TxIntercep
torCMT.java:574)
at org.jboss.ejb.plugins.TxInterceptorCMT.endTransaction(TxInterceptorCM
T.java:522)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxIntercep
torCMT.java:361)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:1
81)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFacto
ryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:6
48)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor171.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatch
er.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.
java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(Loca
lInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerIntercepto
r.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.jav
a:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.
java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:7
0)
at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSession
Interceptor.java:121)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy372.isOpen(Unknown Source)
at sun.reflect.GeneratedMethodAccessor177.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy372.isOpen(Unknown Source)
at com.thortech.xl.client.dataobj.tcDataBaseClient.getInterface(Unknown
Source)
at com.thortech.xl.client.dataobj.tcDataBaseClient.readPartialStatement(
Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.schedule.tasks.tcTskTimedRetry.execute(Unknown Source
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionActi
on.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
Caused by: java.lang.IllegalStateException: [com.arjuna.ats.internal.jta.transac
tion.arjunacore.inactive] [com.arjuna.ats.internal.jta.transaction.arjunacore.in
active] The transaction is not active!
at com.arjuna.ats.internal.jta.transaction.arjunacore.TransactionImple.c
ommit(TransactionImple.java:225)
at org.jboss.ejb.plugins.TxInterceptorCMT.endTransaction(TxInterceptorCM
T.java:501)
... 43 more
10:25:34,078 WARN [AbstractInstanceCache] Unable to passivate due to ctx lock,
id=g4w5ut71-5j
10:34:15,796 WARN [AbstractInstanceCache] Unable to passivate due to ctx lock,
id=g4w5ut71-5m
10:34:15,828 WARN [AbstractInstanceCache] Unable to passivate due to ctx lock,
id=g4w5ut71-5f
10:34:15,859 WARN [AbstractInstanceCache] Unable to passivate due to ctx lock,
id=g4w5ut71-5h
=======================================================
2) Also I am unable to open the Design console now,I just click on the shortcut to the client and also directly the xlclient.cmd. I just get the cmd screen and it goes off!!!I ensured that I copied thejbossall-client.jar.
Looking again for your help!!
Thanks once again
sundas7 -
Unable to install itunes in windows 7 64 bit - hanging
Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
Also i am unable to uninstall Apple update software. Are these both related.
Now how do i get the software installed( itunes installed in windows 7)Hey gigipramod,
Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64
I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
MSI Log File :-
Property(S): ProductToBeRegistered = 1
MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
Please let me how to install 64 bit package on Win7 64 bit.
Thanks in Advance.Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.
-
Unable to install Cisco Unity Express 8.5.1 on SRE-700
Hi.
I have a cisco 2951 router with SRE-700 module and i want to install CUE on it. My router IP configuration is as follows:
interface GigabitEthernet0/0
ip address 10.200.190.225 255.255.0.0
duplex auto
speed auto
interface SM1/0
ip unnumbered GigabitEthernet0/0
service-module fail-open
service-module ip address 10.200.190.226 255.255.0.0
service-module ip default-gateway 10.200.190.225
ip route 10.200.190.226 255.255.255.255 SM1/0
and i have the following files in my FTP directory. Languages needed English and Arabic
cue-installer.sme.8.5.1
cue-vm-ar_SA-langpack.sme.8.5.1.prt1
cue-vm-en_US-langpack.sme.8.5.1.prt1
cue-vm-full-k9.sme.8.5.1.prt1
cue-vm-installer-k9.sme.8.5.1.prt1
cue-vm-k9.sme.8.5.1.key
cue-vm-k9.sme.8.5.1.pkg
cue-vm-k9.sme.8.5.1.pkg.install.sre
cue-vm-k9.sme.8.5.1.pkg.install.sre.header
cue-vm-langpack.sme.8.5.1.pkg
i enter the following command
service-module sm 1/0 install url ftp://<ip>/cue-vm-k9.sme.8.5.1.pkg
installation starts. last message i got is "service module reset due to an error unable to install"
Can anybody help on this?
RegardsHere is the output while installing CUE
TSC-VM#service-module sm 1/0 install url
*Mar 23 07:26:33.501: %SM_INSTALL-6-INST_RBIP: SM1/0 recei$ule sm 1/0 install url ftp://192.168.231.77/cue-vm-k9.sme.8.5.1.pkg
Proceed with installation? [no]: yes
Loading cue-vm-k9.sme.8.5.1.pkg.install.sre !
[OK - 22313/4096 bytes]
Following languages are available for installation.
# SKU Language Code Language Name
1 ITA it_IT CUE Voicemail Italian
2 ESP es_ES CUE Voicemail European Spanish
3 ENU en_US CUE Voicemail US English
4 FRA fr_FR CUE Voicemail European French
5 ESO es_CO CUE Voicemail Latin American Spanish
6 ESM es_MX CUE Voicemail Mexican Spanish
7 ARA ar_SA CUE Voicemail Arabic
8 NLD nl_NL CUE Voicemail Dutch
9 SVE sv_SE CUE Voicemail Swedish
10 NOR no_NO CUE Voicemail Norwegian
11 FRC fr_CA CUE Voicemail Canadian French
12 PTG pt_PT CUE Voicemail Portuguese
13 TUR tr_TR CUE Voicemail Turkish
14 HUN hu_HU CUE Voicemail Hungarian
15 ENG en_GB CUE Voicemail UK English
16 DEU de_DE CUE Voicemail German
17 DAN da_DK CUE Voicemail Danish
18 PTB pt_BR CUE Voicemail Brazilian Portuguese
19 KOR ko_KR CUE Voicemail Korean
20 CHS zh_CN CUE Voicemail Mandarin Chinese
21 JPN ja_JP CUE Voicemail Japanese
22 RUS ru_RU CUE Voicemail Russian
23 HBR iw_IL CUE Voicemail Hebrew
You can install upto 5 language(s) on this platform.
Please select the language(s) you want to install by entering the language number(s)
Languages can be entered as comma separated or space separated list
Example: 1,3 would select 'Italian' and 'US English'
Enter languages:3, 7
Following languages will be installed on the system:
CUE Voicemail US English
CUE Voicemail Arabic
Do you want to continue with the selected options?(y/n):y
input string: lang=no=2,CUE Voicemail US English,CUE Voicemail Arabic
TSC-VM#
*Mar 23 07:27:03.105: %SM_INSTALL-6-INST_RESET: SM1/0 is reset for software installation.
*Mar 23 07:27:42.493: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
*Mar 23 07:27:42.497: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:27:49.197: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:00.877: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:05.921: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:35.380: Delivery Ack could not be sent due to lack of buffers
*Mar 23 07:28:46.764: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
*Mar 23 07:28:46.904: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Parsing package manifest files ....
*Mar 23 07:28:49.172: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
*Mar 23 07:28:50.012: %SM_INSTALL-6-INST_FAIL: SM1/0 is reset due to Unable to install. Please try again.
TSC-VM#service-module sm 1/0 status
Service Module is Cisco SM1/0
Service Module supports session via TTY line 67
Service Module is trying to recover from error
Service Module heartbeat-reset is enabled
Service Module status is not available
No install/uninstall in progress
My FTP Log is as follows
#Software: Microsoft Internet Information Services 5.1
#Version: 1.0
#Date: 2011-03-23 07:25:44
#Fields: time c-ip cs-method cs-uri-stem sc-status
07:25:44 10.200.190.222 [1]USER anonymous 331
07:25:44 10.200.190.222 [1]PASS [email protected] 230
07:25:46 10.200.190.222 [1]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
07:25:46 10.200.190.222 [1]QUIT - 426
07:25:46 10.200.190.222 [2]USER anonymous 331
07:25:46 10.200.190.222 [2]PASS [email protected] 230
07:25:49 10.200.190.222 [2]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
07:25:49 10.200.190.222 [2]QUIT - 226
07:26:43 10.200.190.222 [3]USER anonymous 331
07:26:43 10.200.190.222 [3]PASS [email protected] 230
07:26:45 10.200.190.222 [3]sent /cue-vm-k9.sme.8.5.1.key 226
07:26:45 10.200.190.222 [3]QUIT - 226
07:26:45 10.200.190.222 [4]USER anonymous 331
07:26:46 10.200.190.222 [4]PASS [email protected] 230
07:26:48 10.200.190.222 [4]sent /cue-vm-k9.sme.8.5.1.key 226
07:26:48 10.200.190.222 [4]QUIT - 226
07:26:50 10.200.190.222 [5]USER anonymous 331
07:26:50 10.200.190.222 [5]PASS [email protected] 230
07:26:52 10.200.190.222 [5]sent /cue-installer.sme.8.5.1 426
07:26:52 10.200.190.222 [5]QUIT - 426
07:26:52 10.200.190.222 [6]USER anonymous 331
07:26:52 10.200.190.222 [6]PASS [email protected] 230
07:27:00 10.200.190.222 [6]sent /cue-installer.sme.8.5.1 226
07:27:00 10.200.190.222 [6]QUIT - 226
07:27:02 10.200.190.222 [7]USER anonymous 331
07:27:02 10.200.190.222 [7]PASS [email protected] 230
07:27:04 10.200.190.222 [7]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
07:27:04 10.200.190.222 [7]QUIT - 226
07:27:04 10.200.190.222 [8]USER anonymous 331
07:27:04 10.200.190.222 [8]PASS [email protected] 230
07:27:06 10.200.190.222 [8]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
07:27:06 10.200.190.222 [8]QUIT - 226
07:27:06 10.200.190.222 [9]USER anonymous 331
07:27:07 10.200.190.222 [9]PASS [email protected] 230
07:27:09 10.200.190.222 [9]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
07:27:09 10.200.190.222 [9]QUIT - 426
07:27:09 10.200.190.222 [10]USER anonymous 331
07:27:10 10.200.190.222 [10]PASS [email protected] 230
07:27:11 10.200.190.222 [10]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
07:27:11 10.200.190.222 [10]QUIT - 226
07:27:47 10.200.190.223 [11]USER anonymous 331
07:27:47 10.200.190.223 [11]PASS [email protected] 230
07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
07:27:47 10.200.190.223 [11]QUIT - 226
07:27:48 10.200.190.223 [12]USER anonymous 331
07:27:48 10.200.190.223 [12]PASS [email protected] 230
07:27:48 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
07:27:49 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
07:27:49 10.200.190.223 [12]QUIT - 226
Please assist -
Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4
Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh -
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
Unable to install SQL server 2000 and 2005 on Satellite A205-s5831
Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response meHi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software -
Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1
Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Unable to install Sql Server 2008 R2 express on windows 2003
Hi,
I am unable to install sql server express edition with management tools, on windows server 2003. During rules check, it gives an error that minimum os version is not supported.
.net framework requirements have been met.
Is there something that I am missing ? Any pointers would be of immense help
thanks
SaagarHello,
Whats is Service Pack edition of Windows 2003 server.As per prerequisites it requires SP2 for windows Server 2003 I guess your server is not updated to latest SP.Please refer below link for hardware and software requirement
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1
I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result: Failed: see details below
Exit code (Decimal): -2068053929
Exit facility code: 1212
Exit error code: 87
Exit message: Failed: see details below
Start time: 2014-03-18 14:59:31
End time: 2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li -
Unable to install Creative Cloud
Hello,
I have an extra seat who needs to use Creative Cloud for his job. He cannot install the Creative Cloud application and when trying to do so afresh, he constantly gets the error "Unable to install Creative Cloud Please close all active Adobe applications and retry your installation" message via the dmg image installer file. There are no other or active Adobe application on his iMac and no Adobe application running anywhere on the machine.
iMac OS X 10.8.5, 2.9GHz.
The problem reoccurs even after navigating to the Applications/Utilities folder and putting the folders Adobe Application Manager folder and Creative Cloud to the Trash and emptying it. Then navigating to the Library/Application Support/Adobe/OOBE folder and renaming it to OOBE.old, then again downloading Creative Cloud desktop from the URL https://creative.adobe.com/products/creative-cloud and trying again to install it.
Despite all of this, the same "Unable to install Creative Cloud Please close all active Adobe applications and retry your installation" message prompt comes up and the installation of the Creative Cloud application is abandoned.
This is a very frustrating experience. What is the workaround to get this appliaction installed so he can get on with his work as soon as possible?
PaulSorry for taking so long but I was unable to access my pc. Now that I've got it here is the screenshot of the error. It's in italian:
It says something like:
"There has been the following errors: a possible problem with Creative Cloud desktop. Download a new copy of Creative Cloud desktop and install it again".
As I said before even downloading it again I get the same file and the same error.
Please let me know if you need any other information.
Thanks
mario
Maybe you are looking for
-
Web Dynpro Java : Failed to get deployable object part info for component
Currently we have a web dynpro java project which connects to the ABAP backend with Web Services. Everything seems fine, and when we transport to the production server via NWDI, we have the following error. Everytime we try to access the application
-
Dynamic class loading in Applets
Fully loaded applet in some browser, depending upon some user action, has to perform following things : (1) has to establish an network connection with some other system or server( other than Web Browser Server ) and get named( file name is known to
-
Fab40 templates migration from 2007 to SP 2013
We are working on migrating SP 2007 sites to sp 2013 and in 2007 Fab40 templates are installed and we are getting issue in SP 2013 when doing visual upgrade because of site definitons.Will these templates get upgraded to SP 2013 ?
-
AQ$_ QUEUE_TABLE_NAME _NR
Hello, I created a Multiple_Consumers queue table and a AQ$_<QUEUE_TABLE_NAME>_NR has been created as well. What does this table stand for ? Regards, Guillaume
-
Plantronics 655 bluetooth headset not working with macbook pro
Anyone had problems getting their macbook pro to recognise the plantronics 655 bluetooth headset ? Doesn't show up when the macbook pro searches for bluetooth devices.