Unable to install os x 10.10.1
I have an App Store notice telling me that OS X Update 10.10.1 is available to download. Each time I try to download it, I get a message saying that "Available updates have changed". When I click "show details" the message disapears. I tried to restart my computer and this has no effect. Under "Updates installed in last 30 days, it says that version 10.10.1 has been installed but when look under "about this Mac" it says that the version of the software is 10.10
Click here and install it manually.
(116960)
Similar Messages
-
Unable to install itunes in windows 7 64 bit - hanging
Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
Also i am unable to uninstall Apple update software. Are these both related.
Now how do i get the software installed( itunes installed in windows 7)Hey gigipramod,
Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64
I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
MSI Log File :-
Property(S): ProductToBeRegistered = 1
MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
Please let me how to install 64 bit package on Win7 64 bit.
Thanks in Advance.Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.
-
Unable to install Cisco Unity Express 8.5.1 on SRE-700
Hi.
I have a cisco 2951 router with SRE-700 module and i want to install CUE on it. My router IP configuration is as follows:
interface GigabitEthernet0/0
ip address 10.200.190.225 255.255.0.0
duplex auto
speed auto
interface SM1/0
ip unnumbered GigabitEthernet0/0
service-module fail-open
service-module ip address 10.200.190.226 255.255.0.0
service-module ip default-gateway 10.200.190.225
ip route 10.200.190.226 255.255.255.255 SM1/0
and i have the following files in my FTP directory. Languages needed English and Arabic
cue-installer.sme.8.5.1
cue-vm-ar_SA-langpack.sme.8.5.1.prt1
cue-vm-en_US-langpack.sme.8.5.1.prt1
cue-vm-full-k9.sme.8.5.1.prt1
cue-vm-installer-k9.sme.8.5.1.prt1
cue-vm-k9.sme.8.5.1.key
cue-vm-k9.sme.8.5.1.pkg
cue-vm-k9.sme.8.5.1.pkg.install.sre
cue-vm-k9.sme.8.5.1.pkg.install.sre.header
cue-vm-langpack.sme.8.5.1.pkg
i enter the following command
service-module sm 1/0 install url ftp://<ip>/cue-vm-k9.sme.8.5.1.pkg
installation starts. last message i got is "service module reset due to an error unable to install"
Can anybody help on this?
RegardsHere is the output while installing CUE
TSC-VM#service-module sm 1/0 install url
*Mar 23 07:26:33.501: %SM_INSTALL-6-INST_RBIP: SM1/0 recei$ule sm 1/0 install url ftp://192.168.231.77/cue-vm-k9.sme.8.5.1.pkg
Proceed with installation? [no]: yes
Loading cue-vm-k9.sme.8.5.1.pkg.install.sre !
[OK - 22313/4096 bytes]
Following languages are available for installation.
# SKU Language Code Language Name
1 ITA it_IT CUE Voicemail Italian
2 ESP es_ES CUE Voicemail European Spanish
3 ENU en_US CUE Voicemail US English
4 FRA fr_FR CUE Voicemail European French
5 ESO es_CO CUE Voicemail Latin American Spanish
6 ESM es_MX CUE Voicemail Mexican Spanish
7 ARA ar_SA CUE Voicemail Arabic
8 NLD nl_NL CUE Voicemail Dutch
9 SVE sv_SE CUE Voicemail Swedish
10 NOR no_NO CUE Voicemail Norwegian
11 FRC fr_CA CUE Voicemail Canadian French
12 PTG pt_PT CUE Voicemail Portuguese
13 TUR tr_TR CUE Voicemail Turkish
14 HUN hu_HU CUE Voicemail Hungarian
15 ENG en_GB CUE Voicemail UK English
16 DEU de_DE CUE Voicemail German
17 DAN da_DK CUE Voicemail Danish
18 PTB pt_BR CUE Voicemail Brazilian Portuguese
19 KOR ko_KR CUE Voicemail Korean
20 CHS zh_CN CUE Voicemail Mandarin Chinese
21 JPN ja_JP CUE Voicemail Japanese
22 RUS ru_RU CUE Voicemail Russian
23 HBR iw_IL CUE Voicemail Hebrew
You can install upto 5 language(s) on this platform.
Please select the language(s) you want to install by entering the language number(s)
Languages can be entered as comma separated or space separated list
Example: 1,3 would select 'Italian' and 'US English'
Enter languages:3, 7
Following languages will be installed on the system:
CUE Voicemail US English
CUE Voicemail Arabic
Do you want to continue with the selected options?(y/n):y
input string: lang=no=2,CUE Voicemail US English,CUE Voicemail Arabic
TSC-VM#
*Mar 23 07:27:03.105: %SM_INSTALL-6-INST_RESET: SM1/0 is reset for software installation.
*Mar 23 07:27:42.493: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
*Mar 23 07:27:42.497: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:27:49.197: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:00.877: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:05.921: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 23 07:28:35.380: Delivery Ack could not be sent due to lack of buffers
*Mar 23 07:28:46.764: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
*Mar 23 07:28:46.904: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Parsing package manifest files ....
*Mar 23 07:28:49.172: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Validating package signature ....
*Mar 23 07:28:50.012: %SM_INSTALL-6-INST_FAIL: SM1/0 is reset due to Unable to install. Please try again.
TSC-VM#service-module sm 1/0 status
Service Module is Cisco SM1/0
Service Module supports session via TTY line 67
Service Module is trying to recover from error
Service Module heartbeat-reset is enabled
Service Module status is not available
No install/uninstall in progress
My FTP Log is as follows
#Software: Microsoft Internet Information Services 5.1
#Version: 1.0
#Date: 2011-03-23 07:25:44
#Fields: time c-ip cs-method cs-uri-stem sc-status
07:25:44 10.200.190.222 [1]USER anonymous 331
07:25:44 10.200.190.222 [1]PASS [email protected] 230
07:25:46 10.200.190.222 [1]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
07:25:46 10.200.190.222 [1]QUIT - 426
07:25:46 10.200.190.222 [2]USER anonymous 331
07:25:46 10.200.190.222 [2]PASS [email protected] 230
07:25:49 10.200.190.222 [2]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
07:25:49 10.200.190.222 [2]QUIT - 226
07:26:43 10.200.190.222 [3]USER anonymous 331
07:26:43 10.200.190.222 [3]PASS [email protected] 230
07:26:45 10.200.190.222 [3]sent /cue-vm-k9.sme.8.5.1.key 226
07:26:45 10.200.190.222 [3]QUIT - 226
07:26:45 10.200.190.222 [4]USER anonymous 331
07:26:46 10.200.190.222 [4]PASS [email protected] 230
07:26:48 10.200.190.222 [4]sent /cue-vm-k9.sme.8.5.1.key 226
07:26:48 10.200.190.222 [4]QUIT - 226
07:26:50 10.200.190.222 [5]USER anonymous 331
07:26:50 10.200.190.222 [5]PASS [email protected] 230
07:26:52 10.200.190.222 [5]sent /cue-installer.sme.8.5.1 426
07:26:52 10.200.190.222 [5]QUIT - 426
07:26:52 10.200.190.222 [6]USER anonymous 331
07:26:52 10.200.190.222 [6]PASS [email protected] 230
07:27:00 10.200.190.222 [6]sent /cue-installer.sme.8.5.1 226
07:27:00 10.200.190.222 [6]QUIT - 226
07:27:02 10.200.190.222 [7]USER anonymous 331
07:27:02 10.200.190.222 [7]PASS [email protected] 230
07:27:04 10.200.190.222 [7]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
07:27:04 10.200.190.222 [7]QUIT - 226
07:27:04 10.200.190.222 [8]USER anonymous 331
07:27:04 10.200.190.222 [8]PASS [email protected] 230
07:27:06 10.200.190.222 [8]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre.header 226
07:27:06 10.200.190.222 [8]QUIT - 226
07:27:06 10.200.190.222 [9]USER anonymous 331
07:27:07 10.200.190.222 [9]PASS [email protected] 230
07:27:09 10.200.190.222 [9]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 426
07:27:09 10.200.190.222 [9]QUIT - 426
07:27:09 10.200.190.222 [10]USER anonymous 331
07:27:10 10.200.190.222 [10]PASS [email protected] 230
07:27:11 10.200.190.222 [10]sent /cue-vm-k9.sme.8.5.1.pkg.install.sre 226
07:27:11 10.200.190.222 [10]QUIT - 226
07:27:47 10.200.190.223 [11]USER anonymous 331
07:27:47 10.200.190.223 [11]PASS [email protected] 230
07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
07:27:47 10.200.190.223 [11]sent /cue-vm-k9.sme.8.5.1.pkg 226
07:27:47 10.200.190.223 [11]QUIT - 226
07:27:48 10.200.190.223 [12]USER anonymous 331
07:27:48 10.200.190.223 [12]PASS [email protected] 230
07:27:48 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
07:27:49 10.200.190.223 [12]sent /cue-vm-langpack.sme.8.5.1.pkg 226
07:27:49 10.200.190.223 [12]QUIT - 226
Please assist -
Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4
Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh -
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
Unable to install SQL server 2000 and 2005 on Satellite A205-s5831
Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response meHi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software -
Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1
Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Unable to install Sql Server 2008 R2 express on windows 2003
Hi,
I am unable to install sql server express edition with management tools, on windows server 2003. During rules check, it gives an error that minimum os version is not supported.
.net framework requirements have been met.
Is there something that I am missing ? Any pointers would be of immense help
thanks
SaagarHello,
Whats is Service Pack edition of Windows 2003 server.As per prerequisites it requires SP2 for windows Server 2003 I guess your server is not updated to latest SP.Please refer below link for hardware and software requirement
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1
I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result: Failed: see details below
Exit code (Decimal): -2068053929
Exit facility code: 1212
Exit error code: 87
Exit message: Failed: see details below
Start time: 2014-03-18 14:59:31
End time: 2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li -
Unable to install Creative Cloud
Hello,
I have an extra seat who needs to use Creative Cloud for his job. He cannot install the Creative Cloud application and when trying to do so afresh, he constantly gets the error "Unable to install Creative Cloud Please close all active Adobe applications and retry your installation" message via the dmg image installer file. There are no other or active Adobe application on his iMac and no Adobe application running anywhere on the machine.
iMac OS X 10.8.5, 2.9GHz.
The problem reoccurs even after navigating to the Applications/Utilities folder and putting the folders Adobe Application Manager folder and Creative Cloud to the Trash and emptying it. Then navigating to the Library/Application Support/Adobe/OOBE folder and renaming it to OOBE.old, then again downloading Creative Cloud desktop from the URL https://creative.adobe.com/products/creative-cloud and trying again to install it.
Despite all of this, the same "Unable to install Creative Cloud Please close all active Adobe applications and retry your installation" message prompt comes up and the installation of the Creative Cloud application is abandoned.
This is a very frustrating experience. What is the workaround to get this appliaction installed so he can get on with his work as soon as possible?
PaulSorry for taking so long but I was unable to access my pc. Now that I've got it here is the screenshot of the error. It's in italian:
It says something like:
"There has been the following errors: a possible problem with Creative Cloud desktop. Download a new copy of Creative Cloud desktop and install it again".
As I said before even downloading it again I get the same file and the same error.
Please let me know if you need any other information.
Thanks
mario -
Unable to install creative cloud error code 1
unable to install creative cloud error code 1
windows 8Refer below link
Error "Failed to Install" Creative Cloud Desktop application -
Hi,
After running the prerequisiteinstaller.exe of SharePoint 2013 I am getting the below error in the logs
The tool was unable to install Application Server Role, Web Server (IIS) Role.
Web server role,application server role is already there in the server.
Ran the necessary power shell commands but still not able to proceed with this error.
Please share your inputs to cross over this issue.
Regards,
Sudheer
Thanks & Regards, SudheerHI Sudheer,Please check the link below that explains the solution for the same issues.
http://expertsharepoint.blogspot.de/2014/01/the-tool-was-unable-to-install.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
I have been banging my head over and over searching for the fix and nothing has worked. Google used to be my friend. I am having doubts.
Windows 2012 Server with IIS installed during the server creation using VMware Vshpere. Here is the log from the SP prep tool.
2014-06-23 10:13:12 - Processor architecture is (9)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Common Startup
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-23 10:13:12 - Trying to remove the startup task if there is any.
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-23 10:13:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-23 10:13:12 - Locating the following command line arguments file:
2014-06-23 10:13:12 - C:\sp2013\PrerequisiteInstaller.Arguments.txt
2014-06-23 10:13:12 - Error: This file does not exist
2014-06-23 10:13:12 - Details of the current operating system:
2014-06-23 10:13:12 - Major version number of the operating system: (6)
2014-06-23 10:13:12 - Minor version number of the operating system: (2)
2014-06-23 10:13:12 - Build number of the operating system: (0X23F0=9200)
2014-06-23 10:13:12 - Major version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Minor version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Platform ID of the operating system: (2)
2014-06-23 10:13:12 - Product suites available on the operating system: (0X110=272)
2014-06-23 10:13:12 - Product type of the operating system: VER_NT_SERVER
2014-06-23 10:13:12 - Product type: (7)
2014-06-23 10:13:12 - OS type: (0)
2014-06-23 10:13:12 - Configuring the application's property sheet...
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Management Framework 3.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - PowerShellVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft .NET Framework 4.5
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - Install
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.5.51641
2014-06-23 10:13:12 - A post release .NET 4.5 is installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 6.1.7600.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:12 - Reading version of the following file...
2014-06-23 10:13:12 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:12 - The version is...
2014-06-23 10:13:12 - 1.0.3010.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 10.51.2500.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Server AppFabric
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCC
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheClient is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCS
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheService is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCA
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheAdmin is Installed.
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 2.0.1230.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Information Protection and Control Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.0.959.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 5.0.51212.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - IsInstalled
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:19 - Beginning download/installation
2014-06-23 10:13:19 - Created thread for installer
2014-06-23 10:13:20 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\PreA98B.tmp.XML"
2014-06-23 10:13:20 - Error: Unable to install (2)
2014-06-23 10:13:20 - Error: [In HRESULT format] (-2147024894)
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Flags
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PendingFileRenameOperations
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-23 10:13:20 - Reading the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-23 10:13:20 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-23 10:13:20 - Cannot retry
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Management Framework 3.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PowerShellVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft .NET Framework 4.5
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Install
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.5.51641
2014-06-23 10:13:20 - A post release .NET 4.5 is installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 6.1.7600.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:20 - Reading version of the following file...
2014-06-23 10:13:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:20 - The version is...
2014-06-23 10:13:20 - 1.0.3010.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 10.51.2500.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Server AppFabric
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCC
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheClient is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCS
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheService is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCA
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheAdmin is Installed.
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 2.0.1230.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Information Protection and Control Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.0.959.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 5.0.51212.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - IsInstalled
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:16:23 - Opening log file
2014-06-23 10:16:23 - Opened action for user
2014-06-23 10:16:23 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.23-10.13.12.logIt looks like you may have extracted the files to C:\sp2013. Can you try installing from a mounted ISO instead? Can you also validate that this is Server 2012 and not 2012 R2?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
AlanServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.
Maybe you are looking for
-
How to disable a single cell in a table (and not the whole column)
Hi there, I've got a webdynpro table with a few columns, rows can be created dynamically through a button in the table toolbar. Depending on the value of a certain cell I have to disable another cell (in the same row). I tried to manipulate the view
-
Add 2 container variables in control step BPM
Hi All, I have a scenario where I need to add 2 container variables in control step under AlertMessage and I am using under exception branch Control Step StepName: XXXX Action : XXXX AlertCategory: XXXX AlertMessage: ? I am successful putting on
-
Update SQL Statement in the JDBC sender
Hello! I have a AS400/DB2 table which I am polling for my XI scenario using the JDBC sender adapter. I would like to know if it is possible to use system variables (data/time) in the UPDATE statement field? This because we would like to timestamp the
-
Bapi function module to update PRPS table
Hi , Presently i have a requirement which needs to update some data from ZIOS table into PRPS table. Can any one tell me what is the Bapi function module for updating data into PRPS table. <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDE
-
Dear friends, i am newbie in Java and i want some help. I need to create a GUI, for example using swing, that will call the interpreter of CafeOBJ (Algebraic Specification Language) to make some reductions and provide results. Is it easy and how can