Unable to install patch 137137-09 on sunBlade 150

Hi
I was trying to add the patch 137137-09 in my solaris 10 OS which is installed on SunBlade 150.
No problem till the part of extracting the patch.
On trying to install the same, it throws error regarding the conflict in the architecture of the patch and the machine.
Waiting for your help to solve this issue

A simple search at Sun's corporate home page for "137137"
found Public Sun Alert 246207 as the first search result:
[http://sunsolve.sun.com/search/document.do?assetkey=1-66-246207-1]
Does that describe your issue?
If so, review the Workaround section in that document.
It took me all of 15 seconds to search and find that info.

Similar Messages

Acrobat quits unexpectedly/Distiller unable to install/Patch outside range?

What the????
I uninstalled CS2, uninstalled Acrobat Pro...then reinstalled it....
When I try to launch Acrobat Pro 7.0 I get the warning:
The application Acrobat quit unexpectedly
When I try to launch Acrobat Distiller:
Error- Adobe Acrobat Distiller was unable to install and must quit
I downloaded the Acrobat 7.0 Pro Patch, client version 7.0.2:
The selected applications version is outside the range that can be updated with this installer.
HELP ME PLEASE!

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Acrobat 10 unable to install patches to base

Log shows: Unable to create a temp copy of patch 'AcrobatUpd1001+Tier1.msp'
base package installs no problem, but unable to patch, always gives error, tried several different PC's, followed tips closely in Enterprise Administration Guide, but apparently missing something. Is anyone else able to install the 1001 or 1002 MSP for Acrobat 10? thanks Dennis

XP PC's SP3, what I was doing was (my apologies for the level of detail, but wanted to make sure you understand I'm really trying to follow your guidelines). (Since you are both Adobe employees I've attached our PO and vendor document called adobe acrobat license verification information attachment just to get past any ? of payment). Also including Mr Smith of Adobe who also posed an additional ? as to verify where I got the download (see adobe update download attachment).
Step 1: Test out the new 10 to make sure I understand how it works and its ability to uninstall previous products. That part seems to work well in silent mode. 10 successfully installs and per my testing and client feedback it works nicely. This round we are by default not installing reader 10 on acrobat 10 PC's (previously with version 9 there were many academic web sites that for whatever reason, they specifically had to have the reader installed in order for clients to download PDF's. (see acrobat base 10 works fine attachment)
Step 2: After getting past initial install testing, I noticed that you have both a 10.0.1 version tier 1 update that I downloaded called "AcrobatUpd1001_Tier1.msp" and a version 10.0.2 called "AcrobatSecUpd1002.msp". So given that 90% of my clients don't have admin rights (so the adobe updater doesn't really work for me in general since I'm not aware you have a silent switch on the adobe_updater.exe (see adobe updater posted question attachment) I tried following the instructions on page 38 of your Enterprise Admin Guide to both install the 10.0.0 and then patch it with the 10.0.1. Anytime I try to add the PATCH= command in my batch job (that I will run via SMS) (see batch job 10.0.0 silent works, and batch job 10.0.1 gets error msg) I get an error. So I have tried both, a job that installs 10.0.0 and then a separate job to apply the patch and also a job to try and do both steps in one job. Anytime I try to do either patch I get an error msg (see patch apply job & error message & verbose adobe install log attachments).
Step 2.5: I have tried this on several different workstations to verify it just wasn't a problem with my test VM workstations.
Step 2.6: I also tried replacing my acropro.msi with a clean copy that I had not utilized your configuration tool against.
Step 3: I have tested installing 10.0.0 on a desktop with admin rights and then letting it utilize the adobe updater method and that works just fine.
If you could be so kind as to point me in the right direction, I would truly appreciate it and I thank you for your time.
Thanks Dennis
Dennis Bury
Systems Manager
Mallinckrodt Institute of Radiology
Washington University School of Medicine
4525 Scott Ave, Suite 3200
St. Louis, MO 63110
office 314-362-8666
Cell 314-707-0009

Configure internet access on sunblade 150

Hey everyone,
Before I start, I��ve been using unix for about half a year so a bit of a noob. I��ve re-installed Solaris 8 on a sunblade 150.
I��ve installed gnome and firefox, I��ve configure my ip in the host file.
I would like to try and connect to the internet, the sunblade connect though a lan though a hub.
I can ping and ftp to my linux/NT machines.
I now have no idea what to do?
I��ve been googleing for a while and thought I should try and ask here I guess you guys would be able to answer this in a flash?!
Thanks in advance

I just finished re-installing my Solaris 10 x86 system (new motherboard and some other cards, so a re-install was the cleanest method).
You'll need to gather the DNS information from your ISP.
I happen to have a cable modem and a router connected to it.
My home LAN goes thru that router then the cable modem, to get to the Internet.
The router's configuration setup grabbed the IP's of their DNS servers and they were visible in the config screens.
Alternatively, if you have a Win9x system that successfully surfs the web, WINIPCFG can show those DNS addresses.
Do the following on the SB150, as root user:
(1) Edit your /etc/nsswitch.conf file and add 'dns' to the hosts line, space delimited.
(2) If you have a router as I do...
touch /etc/defaultrouter then edit the file, placing the IP address of that router -- only the IP address. e.g. 192.168.1.1
(3) Review the contents of your /etc/inet/hosts file. No typos?
The /etc/hosts file is actually a link to /etc/inet/hosts.
(4) touch /etc/resolv.conf
edit that file and enter the necessary information -- format is TAB delimited:
<b>domainname <ISPNAME> (e.g. aol.net, comcast.net, sbc.com)
nameserver <DNS IP address number 1>
nameserver <DNS IP address number 2></b>
Note that the domainname is NOT <i>www...</i>
My ISP happens to show me three DNS servers, you can include as many as you desire.
Save the files and reboot the system because the info is only read at bootup.

CSA MC Install error: Unable to load patch information

When we try to install CSA MC 5.2.0.263 (and 5.2.0.203) on Windows Server 2003 Ent Ed (or R2) we receive error:
"Unable to load patch information into the database"
How to solve the given error?

Just a couple things to check. If running the CSA agent on the MC make sure its disabled during the upgrade
You have enough free space in the installation directory

Unable to install Acrobat Patch 8.16 on Mac. What can I do?

Unable to install Acrobat Patch 8.16 on Mac. What can I do?

What system Version??
(Please note information is given by an Experienced User of Acrobat. I am not an employee of Adobe.)

Unable to install Siebel patch 7.8.2.16

Hi all,
I have to upgrade from Siebel 7.8.2.12 to 7.8.2.16.
When I tried to install Siebel Enterprise Server in our siebel server, it raised an error message looking like "Unable to install Siebel Enterprise Server: Patch is associated with a product that is not installed on target machine". I find that the pacht version is not right, that i am trying to patch a SEA version with a SIA version, but i can´t find the correct patch in support.
I would appreciate if you have any insight to this problem.
Thanks
Leonardo

Leonardo,
Here are the patch numbers for 7.8.2.16, you can search for the patch number on support.oracle.com:
SEA: 11687075
SIA: 11687049
Thank you,
Wilson

Unable to install Acrobat Patch 9.2 on Mac

Case ID: 181226045
Customer is unable to install the Patch 9.2 for Acrobat 9.
Following are notes from customer:
Downloaded 9.2 patch. When attempting to install, message box said original software had been altered in some way and that patch cou
ldn't be installed. I have no idea how software was altered. Works fine right now. Would prefer not to have to reinstall.
OS is Snow Leopard
Operating System: Macintosh
Has it ever worked? If so, what's changed? (provide comments in description field): Not Applicable
Same results with different file?: Not Applicable
Same results with different computer?: No
Recent System Hardware or Software change?: Yes

Okay..
I finally have a few minutes to add some further information to this incredibly time consuming a frustrating chapter in the life of updating AdobeAcrobatPro9.0 to 9.2.
Short Re-cap:
What originally started this whole process was trying to update my very stable version of AdobeAcrobatPro9.1.3 to 9.2. After hours and hours of trying to make this update including re-installing the application several times from the original DVD, calling in to Adobe Tech Support multiple times and getting on with Apple support, I finally requested a new DVD from Adobe which I got.
Using that original DVD I reinstalled the application from scratch which put AdobeAcrobatPro 9.0 on my hard drive in the applications folder. I made sure to fix the permissions on my system first (I'm running OSX 10.5.8). I also followed virtually every suggestion from every source both on the Internet, Adobe Tech Support, Adobe Forums, as well as suggestions from some other of my engineers who work for me since I own my own software company.
Where I am at now is that while I have AdobeAcrobatPro 9.0 installed, I cannot even update to 9.1. I am now stuck with the original version.
I am thinking that this may have to do with the languages implementation. The new install that I received from Adobe is ENGLISH ONLY. I am attaching a screenshot. All of the plugins are installed and active.
I am surmising that there is some offensive code in the updater that doesn't like single language versions of AdobeAcrobatPro 9.0. In one of the posts a Norweigan gentleman said he got his version to finally update but he had 3 language versions in Norweigan....
If I was Adobe I would investigate the possibility that there are language dependencies that are causing this very troublesome and persistent problems for many many users. This is a very known issue now and due to the serious nature of the security deficiencies in the Adobe Acrobat Pro product versions previous to 9.2, I would think Adobe would want to address this quickly to avoid any class action litigation for negligence in keeping their software properly patched and patchable.
Since it's apparent that the normal tiers of support at Adobe aren't able to assist the multitude of angry and frustrated users of this product that someone in a higher position at Adobe gets involved to actually try and find a real solution and not hide behind the excuse of not being able to duplicate it.
This is a cop out and pretty lame excuse for a company as big as Adobe.
I'd really like to hear from someone at Adobe who not only has a sense of pride and responsiblity about Adobe products there but who also has the technical expertise and willingness to launch a serious effort to fix this preposterous situation.

Unable to install DOT NET patch in windows server 2008 standard.

We want to install patch of DOT NET in windows server 2008 standard but we are faced error like.
KB2468871v2 does not apply, or
is blocked by another condition on your computer.
So please do needful for it as soon as possible.
Bhavesh

Hi sbpl,
If you are able to repair .net 4.0 without error, please go head and install KB2468871 again.
Download .NET Framework 4.0 full package, double click to launch, select repair.
http://www.microsoft.com/en-us/download/details.aspx?id=17718
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to install a Solaris OS in a Single disk slice

Hi,
We are unable to install the Solaris-OS on a single slice disk.
We found that, only "Solaris 10 10/08 (U6)" release can support the single slice disk installation, prior release are not. Is it true ?
We found it from "LDoms Community Cookbook " , from given link
http://wikis.sun.com/display/SolarisLogicalDomains/Section+2+-VirtualDevices
Paragraph is
" Before Solaris 10 10/08 (U6), when a backend is exported to a domain as a single slice disk, it will appear in that domain as a disk with a single partition (s0). Such a disk is not visible with the format(1m) command and its partition table can not be changed. A single slice disk will not be visible from the Solaris installer and can not be select as a disk device on which Solaris can be installed. "
Our Configuration are
sc> showhost
System Firmware 6.6.4 Sun Blade[TM] T6300 2008/07/01 02:03
Host flash versions:
OBP 4.28.9 2008/06/30 21:26
Hypervisor 1.6.4 2008/06/06 04:57
Sun Blade T6300 Server Module POST 4.28.6 2008/05/23 12:35
-bash-3.00# cat /etc/release
Solaris 10 8/07 s10s_u4wos_12b SPARC
Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 August 2007
We Installed a 127127-11 patch also.
-bash-3.00# ldm -V
Logical Domain Manager (v 1.0.3)
Hypervisor control protocol v 1.1
Using Hypervisor MD v 1.1
System PROM:
Hypervisor v. 1.6.4 @(#)Hypervisor 1.6.4 2008/06/06 04:57\015
OpenBoot v. 4.28.9 @(#)OBP 4.28.9 2008/06/30 21:26
Use below command to add single slice disk
*# ldm add-vdsdev options=slice /dev/dsk/c0t1d0s3 vol3@primary-vds0*
Getting error in between installation,
ERROR: No disks found
- Check to make sure disks are cabled and powered up
Please help us to, resolve this issue. Thanks a lot.
Best Regards,
Parvez Memon.

Hi,
Whenever i try to installed the patch 137137-09, it required a below patch
0 For patch 137137-09, required patch 138866-01 does not exist.
And try this then
# patchadd 138866-01
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 138866-01 are installed on the system.
No patches to install.
I am not able to install this patch 138866-01, even i try with 138866-02 but not success.
Thanks for your reply, please help to resovle the same.
Regards,
Parvz Memon

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Unable to install SAP B1 on Windows server 2008 R2

Hi
I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
Environment is set as following :
1. SQL SERVER 2008 Installed on Server A
2. SAP B1 to be installed on Server B
3 Both servers are in domain
4.Firewall is off
5. ODBC Connection is tested Successfully
6 Port is also seem to be ok.
But after Installing server tool, when trying to install the Server , in server type nothing is displayed.
I also checked the connecting SQL server from the instance .
Please help is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
Thanks & Regards
RP

Windows server 2008 R2 is not a supported OS for a lower 2007 version. You need to install a higher version.
Hi Gordon ,
It means I have to install SAP 2007 B PL10 afterwards upgrade it to the latest patch level .
But searching in the forms , i have seen some bopdy installed the SAP 2007 B PL15 on Windows server 2008 R2.
Thanks in advance
Regards
RP

Unable to install patchset 10.2.0.3 on XP - wants me to stop ALL services

Hi,
I am unable to install patchset 10.2.0.3 on our existing OWB installations (patchset 10.2.0.2) already installed.
I get an error message saying that certain files are in use and that I should stop the "following services". It then proceeds to list every running service!!
I have tried installing OWB with the 10.2.0.2 patchset and then I am able to install the 10.2.0.3 one but that is not a viable solution as I already have several users with OWB 10.2.0.2 installed on their machines and they need to patched to 10.2.0.3 ASAP. I really don't want to have to uninstall OWB from their machines and reinstall it.
So, what's going on? Why does the OUI say it wants every Windows service to be stopped?

I think this problem is caused by one or several MS Windows services (maybe MSDTC?). OUI cannot identify exact service name which locks Oracle file(s) and show all services in list.
There are several notes on Metalink about this problem:
Note:356181.1 "Errors about files being in use, when applying a patch."
Note:402546.1 "How To Specify Which OCI.DLL The MS DTC PROCESS Uses"
Note:198699.1 "Access denied on OCIW32.DLL when removing 9iAS Release 1 (1.0.2) installation"
Note:232827.1 "Universal Installer can not replace the oci.dll Error when install/deinstall Oracle Products"
Note:294350.1 "Write Errors, or Files In Use, or NoServicesForProcessException During Patch Installation"
Try to change registry value HKLM/SOFTWARE/Microsoft/MSDTC/MTxOCI/OracleOciLib to nonexistent file name (for example xxx.dll), restart Windows and try to install patch again. Please give a feedback to this recommendation, I think it would be interesting to all.
Regards,
Oleg
Message was edited by:
oleg

Unable to install Windows 7 RC x64 on macbook 2.2

hi
im unable to install windows 7 x64 rc on my macbook. i have a macbook 2.2 (white)
after creating the partion using boot camp my comp restarts and gets stuck on a black screen that says
1.
2.
choose CD-ROM boot type :
thats it.. nothing more.. jst a blinking cursor.
any idea wat the error is.
1. can my macbook 2.2 (white) run x64?
2. i have downloaded a patch for bootcamp (bootcampx64.msi) , wat do i do with it?
3. what should i do next?

http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
Read carefuly that article. It describes step by step how-to modify Windows 7 64x RC DVD image to boot smoothly on any Mac. Be sure to creat 8 sector disk instead of 4
Thanks to Jowie I was able to install Windows 7 64x on my early Aluminium iMac.
PS: Be sure to download Boot Camp version 2.1.1 and modify it so setup will run without errors. I can't hel you with direct links but I can at least warn you. Have fun and good luck

Adobe CS5: Unable to install updates, close instances of AAM to continue.

I have come across this issue twice so far in my summer madness of machine deployments where I work at a unversity. The message I get while trying to run updates using Adobe Application Manager:
Some updates failed to install.
The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry:
[INSERT ADOBE SOFTWARE TITLE HERE]
You are already running the Adobe Application Manager. Please close all instances of Adobe Application Manager in order to continue with this installation.
Below is a snippet of my aamu.log file:
2010-06-24T23:18:24: >>> Adobe Updater Log Begin >>>
2010-06-24T23:18:24: UpdaterCoreImpl::InitLogFile : Application Version 1.0.0.67
2010-06-24T23:18:24: UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = /Users/mshepherd2/Library/Application Support/Adobe/AAMUpdater/1.0/aamu.log
2010-06-24T23:18:24: UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
2010-06-24T23:18:24: UpdaterCore : Returning from << UCInitialize >> Returning with outErr Value => = 0
2010-06-24T23:18:25: Returning from << UCCheckForUpdates >> call with outErr value - = 0
2010-06-24T23:18:25: CFU(Webfeed):: Web feed hasn't changed since last time.
2010-06-24T23:18:25: CFU(Webfeed): Webfeed is empty
2010-06-24T23:18:25: CFU(Webfeed): MRL is empty
2010-06-24T23:18:25: Check for Updates was done successfully.
2010-06-24T23:18:44: Check for Updates was done successfully.
2010-06-24T23:18:44: UCIsSelfUpdateAvailable : Function returned with value => = 0
2010-06-24T23:18:44: UCIsSelfUpdateAvailable : Is BOB downloaded => = 0
2010-06-24T23:18:44: UCDownloadUpdates : (A) UCIsSelfUpdateAvailable API returned value = 0
2010-06-24T23:18:44: StartUpdateInstallerSubsystem : WARNING - RIBS Setup is Already running.
2010-06-24T23:18:45: Returning from << UCTerminate >> call with value = 1
2010-06-24T23:18:45: UpdaterCoreImpl::ShutdownLogFile : Going to call ShutdownESDLogFile()
2010-06-24T23:18:45: <<< Adobe Updater Log End <<<
I'm mainly working with CS5 Design Premium Suite (running OS 10.6.3) with users/myself and haven't been able to solve this problem. We utilize Active Directory logins and give the users admin rights ( I know...I know gotta love education). To get right down to it I'll list what I've tried on my machine and on someone else's with the exact problem.
- MADE SURE NO OTHER ADOBE APPS OR AAM IS RUNNING AS A PROCESS (duh)
- deleted any local adobe pref files, cache files and adobe application support files.
- deleted login keychain
- ran disk permissions
- ran Adobe Cleaner and reinstalled the whole suite numerous times...did nothing
- tried using both a different local and AD account, this did infact allow me to run the updates. This proves that either local accounts or AD account can work...just not mine!!
- I've even moved my user folder data so next time I logged in, it would create a new user folder. This still produced the same error. Does it have to do with anything in the user directory services and permissions??
One pattern I found was using another account whether if it was a new local account or a fresh AD account logged in, I would get the prompt for the AAM to edit the system.privilege.admin file prior to it searching for availible updates. Logging in has myself I don't get this.... therefore it goes straight to the error message.
I hope there's a fix for this, I've learned far more than I ever wanted to learn about the file structure of the vast CS5 suite and its smaller AAMUpdater counterpart.

I have the same issue, particularly with Pixel Bender 2.5, all the other upgrades get installed correctly without trouble but this one always fail, the message I get is the same one every time:
Adobe Pixel Bender Toolkit 2.5 Update
Installation failed
Can you point me in the right direction? It seems to me that the patch is faulty.
Thanks.
Update 01/15/2011
Here's another update on my issue with Adobe Application Manager, I just realized today that actually none of the available upgrades got installed. Although it only marks an error with Pixel Bender, other components such as Photoshop, Premiere and others aren't being upgraded either even when the program tells you otherwise, what I mean is that for example there's Photoshop 12.0.2 available for download so I click on "Update"; the files get downloaded and installed with no error message being displayed but when I check the software it is still version 12.0.1, the same is happening with Premiere and another one, can't remember which one.
This is additional to the issue of Pixel Bender being unable to upgrade.
Please advise,
Thanks,
David.
Update 01/16/2011
I tried to download all the available updates individually from the Adobe website, the only one that went through was Photoshop, but then when I double clicked it to install it the same faulty application manager launched and I got the same behavior than before, it runs the installation and displays a message that states that everything was installed correctly, yet there no upgrade performed.
All the rest of the available downloads failed to mount.
Also the speed for download is excessively low, I checked my connection and the issue is not on my end, but yours.
This is starting to become very frustrating.

Unable to install patch 137137-09 on sunBlade 150

Similar Messages

Maybe you are looking for