Unable to install printer hp laserjet p1102

Hi,
When I trie to install my HP Laserjet P1102 printer, i only get the message 'The disk you inserted is not readable by this computer' when plugging the USB cable in. I am unable to install the printer. Anyone who can help me?
Thanks

it should be easy: go here and get the driver
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4110304#N170
just copy n' paste that into your browser's URL address bar, or go to hp.com and look for your model number
then choose your operating system, and download the driver. I forget which order you're supposed to do this-install the driver first then plug in the printer, or plug in the printer first, then install the driver. Oh, and Timothy Verheyen, it'd be a great help if you told us what kind of Mac you have and what OS it's running (10.5/10.6/10.7 or 10.8), plus any other info that you think would be helpful. the cd could be scratched or the installer on the cd could be out of date. Anyways, boogie over to wherever, and grab the driver
JB

Similar Messages

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printer HP Laserjet P1102 unable to set/print into EconoMode

I just purchased Printer HP Laserjet P1102 and the installation was good. But I could not set the Printer Setting to EconoMode. Even the EconoMode check box was thicked, the printer print in normal (bold)... so that waste my toner.
I already install the latest driver from HP website, but EconoMode still not working. Please help me.

Are you running Windows 7 in Boot Camp, or do you have a Mac with virtualization of Windows 7 on top of some Mac OS X, using some virtualization software? Classic Mac operating systems can't run Windows 7, but can run MS-DOS and Windows 2000 or earlier in emulation.

How to install Printer HP LaserJet P2015 in Windows 7!

Dear all!
I am luck using windows 7-32bit. I would like to install Printer HP LaserJet P2015 in Windows 7, but I can't install it because when installing, I get it failed. In fact, I can install it in Windows XP without any obstacles, but now I upgrade to Windows 7 32-bit. Would you mind telling me what to do to solve it?
Thanks a lot and I am looking forward to hearing from all.
My best regards,
LUCK
This question was solved.
View Solution.

Hi LUCK,
The printing functionality for your driver is prodided by the HP Universal Print Driver.
You may download the driver by clicking the Download button from the link below:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
If you may find it hard to understand any of the installation steps, you may find the full details below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Please let me know of any needed clarification.
Sincerly,
Shlomi
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

0x0000007a, Unable to install Printer

We have an HP DesignJet 500 on our network that is shared via a Windows 2003 Server for our CAD users. When the users connect via our VPN to our RDP server (Windows 2008 Standard R2), the users do not see the printer on our network and cannot map the printer.  I
have made multiple attempts to first map the HP DesignJet on the RDP server ( I have local admin rights), each time resulting in the error message "Windows cannot connect to the printer." There is nothing in the windows logs with further information.
I installed the DesignJet on another Windows 2008 Standard R2 server successfully and tried to map to it from the RDP server and I get the same error. I have downloaded the newest drivers from HP for Server 2008.
I have also attempted to install the HP DesignJet on the RDP server, first using the IP address of the printer, then using slash slash ServerName slash PrinterName, slash slash serverIP slash PrinterName,. (links were not permitted in this box)
All have ended with the same error: "Unable to install printer. Operation could not be completed (error 0x0000007a)." How can I get this printer installed so it can be used via the RDP server?
Thank you for your assistance.

This is the error
C:\>winerror 0x0000007a
   122 ERROR_INSUFFICIENT_BUFFER
   122 ERROR_INSUFFICIENT_BUFFER
Not a clue what's happening on the RDP server. Failure adding as a local printer as you did on the other 2008R2 machine seems extremely odd.
Since locally and connection fails, I suggest taking a look at the spooler file structure for recursive directories
C:\windows\system32\spool\drivers\x64\3
C:\windows\system32\spool\prtprocs\x64
Here are some similar posts. The first post actually addresses RDP server although with different error.
http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0db95dda-1820-48c8-9536-501103e53f15/client-cant-connect-to-the-printer-print-server?forum=winserverprint
Alan Morris Windows Printing Team

"unable to install printer, the RCP failed" installing Canon D1180 printers on Server 2012

Hello,
We are getting error "unable to install printer, the remote procedure call failed" attempting to install 2 Canon D1180 multi-function printers on a MS Server 2012. We have 2 print servers. Attempting to install the printer generates the same error on both servers and kills the spool service on one of them.
Any suggestions?
Thanks

Hi Patrice,
I appreciate your relpy. The error is happening on our print server (not client side) while creating the printer object. It's a Windows Server 2012 64bit Standard installation.
RPC is running and is set to automatic. We have 2 Canon D1180s accounted for thus far and the error appears to be isolated to this particular printer driver.
We currently have 160 total printers on the server and aren't experiencing that error with any of the others. Checking logs at the time of the error doesn't provide any additional insite.
I am able to install the same network printer from a client workstation (Windows 7 64bit) using the same driver without having to the do the workaround mentioned above.
Thank You!

Unable to install printer Deskjet 6122 on windows 7 (64bit)

I bought a new HP Pavilion Model HPE h8-1237c running Windows 7 Professional (64bit). I’m not having any luck at trying to install my old HP Deskjet 6122 printer. Drivers on disk and newer downloaded ones are not compatible with the 64 bit OS. HP suggests installing drivers for Deskjet 990c as alternative. That didn't work either. This new computer only has USB ports and not the old parallel one like my old Pentium 4 Windows XP computer. The printer does have a USB hookup, but windows doesn't install the printer as plug and play since there are no drivers available. I've tried installing it running Windows Virtual PC in XP Mode. The printer install software runs fine in the virtual mode until it gets to the "print test page." At that point the install fails to find any printer at which time it completely reverses the install. Pffft ! !
Help please! I've been going crazy for two days to solve this problem. I haven't even begun to attempt installing my trusty old HP Scanjet 5530 flatbed scanner. I suspect it will be a similar nightmare as is this current printer dilemma.
Am I destine to have to buy new hardware that’s compatible with windows 7 (64bit)?
This question was solved.
View Solution.

The Deskjet 6122 driver should work fine on Windows 7 using the DEskjet 990c driver, but many folks (myself included) have been having problems getting the Deskjet 990 driver to download from Windows Update.
You have probably already done the steps here, but if not start with that. If the HP Deskjet 990 does not show up after clicking on Windows Update as shown in step 8 and you get a message that "Windows Update was unable to find a list of devices, try again later" then see the solution here. If the problem still exists then you can download the driver from the Microsoft Update Catalog site, but this is not very easy to use. If you need to use the catalog site post back here and I will write up some directions.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I am unable to install print software on my windows 8 computer

I had my hp m1212 nf installed on my laptop (lenova e531). Over the weekend, i had to restore my Windows 8 operating system. The printer disappeared after the restore, so i need to reinstall it. I went to hp website and downloaded software and driver (2014-09-17 , Version5.0, 212.67M). On trying to install, my computer freezes up, goes into continuous installing files loop, etc... and the printer never shows up. I also tried using the tool to diagnose and fix problems (file is hppiw i think) and that tells me that my printer is not supported.
Any suggestions before i throw the printer out the window?
Thanks,
Mark

Good day!
Personally, I have one experience from my colleague notebook.
We are resolving this issue by removing all temp files.
Try this steps: Clean up your disk with Disk Clean up, http://www8.hp.com/h20621/video-gallery/us/en/customer-care/1878273257001/running-the-disk-cleanup-u...
Not sure if this helps...
Good luck!
Although I am an HP employee, I am speaking for myself and not for HP.
Say "Thanks" by clicking the thumbs up in the post that helped you.

Unable to install printer driver

I am settting up my new printer and can't complete the task.
I attempt to download the software and keep getting a message that the device is not detected. Please help
Thank you

@Bstraub, Welcome to the HP Forums!
I saw the message about the printer not being detected when you attempt to install it, and I will certainly help you. I am going to ask that you please let me know some more helpful information to help me research the problem for you to get started.
If there are any steps here that you have not tried, please try them before responding and include the result:
Which connection type are you using to install the printer (USB/ wireless/ wired/ Bluetooth)?
What is the Operating System of the computer?
Will the printer make copies successfully?
What Firewalls and Anti-virus software are installed?
Have you tried disabling or uninstalling them?
If you're running Windows, run the Print and Scan Doctor and include the results.
Is the printer plugged directly into the wall outlet (avoiding power bars and surge protectors)?
Have you completed all Windows/Mac OS Updates?
Have you tried using a USB/Ethernet cable to install the printer instead of wireless, and if so, have you tried a different cable?
If you are installing wireless, try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and try the installation again.
I look forward to hearing back from you! If you wish to show appreciation for my efforts to help you, please click the thumbs up icon down below!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Unable to install printer software. c5500

While installing software for c5500 printer, I get fatal error stating old version of msi toolbox can not be uninstalled. I think this may be a Registry error from a past uninstall, but I'm not sure. I'm running Windows XP. Any ideas?

While installing software for c5500 printer, I get fatal error stating old version of msi toolbox can not be uninstalled. I think this may be a Registry error from a past uninstall, but I'm not sure. I'm running Windows XP. Any ideas?

Cannot install printer HP LaserJet Pro M1536dnf MFP in windows 10

i dowload last driver
http://ftp.hp.com/pub/softlib/software12/COL34693/Im-86005-4/hp_M1530_MFP_full_Solution_usb_n_w.exe when install Driver show this error this details from Event windowsFault bucket 1777042165, type 5
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: hpbcsiinstaller.exe
P2: 3.0.3.5253
P3: 4cf952f9
P4: Microsoft.Practices.EnterpriseLibrary.Common
P5: 4.1.0.0
P6: 4905f4a0
P7: 35b
P8: 3e
P9: IOIBMURHYNRXKW0ZXKYRVFN0BOYYUFOW
P10:
Attached files:
C:\Users\xx\AppData\Local\Temp\WERF1BD.tmp.WERInternalMetadata.xml
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_hpbcsiinstaller._12bc8c753bac5b4c5b7ee9ad17813c5642ac5e_00000000_142c117a
Analysis symbol:
Rechecking for solution: 0
Report Id: db4411bc-3d02-11e5-9beb-70f395569ede
Report Status: 0
Hashed bucket: ca6f2bc78904b4f03c6fba89523a6d23 how can install scanner and fax network Manual until the HP upload driver compatible windows 10 and when update windows 10 show my printer, when i install update show this error

please help

Unable to Add Printer (HP LaserJet Pro 200 color MFP m276nw) as a New Device to HP Connected Account

(A) When I click "Print Information Sheet" on the HP Web Services tab/ "Web Service Setup" to obtain my printer's email address to use in the claim code box...NOTHING HAPPENS. No claim code, No email address
(B) When I click "Print Information Sheet" on the HP Web Services tab/ "HP ePrint" to obtain my printer's email address to use in the claim code box, I get the following error message:
Connection error. Check Internet connection
[email protected]
If I try to enter the xxxxxx before the @ sign in the claim code box I get "Unexpected Error"
(C) If I use the printer's email address obtained from the Printer's Configuration Report and enter the xxxxxx before the @ sign in the claim code box I get "Unexpected Error"
What do I need to do to correct this?

Seems that HP is not supporting your printer, it is written on the specs that it supports but in fact its not the case!!!
Check on the following website if your printer is available
http://support.hp.com/hr-en/document/c02814760

HP Laserjet P1102 print multiple pages - USB connected to Airport Extreme -

Hello,
My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
Help anyone..
Thank you very much,
- eagleputt

Hi gingerjedi,
It's normal with your actual Airport and confirm by Apple, but ...
Only If you see your printer in Airport Admin Utility under Printer :
1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
4) Repair permissions with Onyx or with your Install Disk
5) Restart your computer
6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
7) In Prefs Panes, select Printer ( + ) and install a new Printer
8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
9) And click Done
With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
I think all is ok for you.
Message was edited by: thebuzzman

Installing Print Drivers on Server 2008 R2 cluster - Failing with error 0x000000006be

Hello,
I'm currently working with a client that has a Cluster that has 24 servers with 84 resources. This cluster is dedicated to printing only. They have multiple types of printer brands and various different models of each brand. The problem is when they try
to install a Xerox GPD PS, PCL, PCL6 3.3 driver which is the newest driver it has issues with the install with
"An unexpected error occurred in the print driver. Close the current driver window and retry the operation"
The other errror is
"Unable to install printer. Operation could not be completed (error 0x00006be)"
This happens on all of the clusters and physical machines. What can i do to look and find where the problem lies?

Here are some of the windows event logs
Faulting application name: PrintIsolationHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bd3b1
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0x40000015
Fault offset: 0x000000000002a84e
Faulting process id: 0x1eb4
Faulting application start time: 0x01cf80152f074a2e
Faulting application path: C:\Windows\system32\PrintIsolationHost.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: 6da43fee-ec08-11e3-9d62-0050569e0008
A device or program has requested attention. Device or application: C:\Windows\system32\PrintIsolationHost.exe. Message title: Microsoft Visual C++ Runtime Library.
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: PrintIsolationHost.exe
P2: 6.1.7600.16385
P3: 4a5bd3b1
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: 40000015
P8: 000000000002a84e
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_PrintIsolationHo_e4795317f6faacc7b641e8555e562e8adea4f1_13a9d52b
Analysis symbol:
Rechecking for solution: 0
Report Id: 6ca58cce-ec08-11e3-9d62-0050569e0008
Report Status: 4
The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level.
Change the authentication level to Pkt_Privacy and run the script or application again.
Faulting application name: PrintIsolationHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bd3b1
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0x40000015
Fault offset: 0x000000000002a84e
Faulting process id: 0x1eb4
Faulting application start time: 0x01cf80152f074a2e
Faulting application path: C:\Windows\system32\PrintIsolationHost.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: 6da43fee-ec08-11e3-9d62-0050569e0008
A device or program has requested attention. Device or application: C:\Windows\system32\PrintIsolationHost.exe. Message title: Microsoft Visual C++ Runtime Library.
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: PrintIsolationHost.exe
P2: 6.1.7600.16385
P3: 4a5bd3b1
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: 40000015
P8: 000000000002a84e
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_PrintIsolationHo_e4795317f6faacc7b641e8555e562e8adea4f1_13a9d52b
Analysis symbol:
Rechecking for solution: 0
Report Id: 6ca58cce-ec08-11e3-9d62-0050569e0008
Report Status: 4
The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level.
Change the authentication level to Pkt_Privacy and run the script or application again.
Under system
Application popup: Microsoft Visual C++ Runtime Library :
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Application popup: Microsoft Visual C++ Runtime Library :
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.

HP Laserjet P1102 does not work with Windows 10

I have just upgraded from Windows 7 to Windows 10 and whilst my Canon MG6150 works with Windows 10, the other printer HP Laserjet P1102 does not. Looking at the HP website it seems that the Windows 10 drivers for this printer are not yet available. Is there any way I can use the printer without the dedicated drivers? I have been told I should try to roll back but the printer is not recognised in device manager. Please help!

Manual, Please let me know the outcome.

Unable to install printer hp laserjet p1102

Similar Messages

Maybe you are looking for