Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insight

Found the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual.

Similar Messages

Remote Server Administration Tools for Windows 10 Technical Preview Not installing

When i try and install the remote server administration tools for windows 10 on my windows 10 technical preview install i get this error
Any ideas why this is happening? when i'm installing the correct version for windows 10
http://www.microsoft.com/en-us/download/details.aspx?id=44280

On Thu, 12 Feb 2015 07:33:29 +0000, samfty wrote:
Any ideas why this is happening? when i'm installing the correct version for windows 10
If you're running 9926 then you're not installing the correct version. If
you expand the Details section you'll see that version was published last
October. You'll need this one, which was published in at the end of
January:
http://www.microsoft.com/en-us/download/details.aspx?id=45520
Paul Adare - FIM CM MVP
Q. How do you solve bus problems?
A. Shoot the driver.

Failure in Installing Remote Server Administration Tools on Windows 8.0

I have recently download
Remote Server Administration Tools (64 bit) for Windows 8,but unfortunately I couldn't Installed it & an error message appeared on the screen after I tried to
Install the tools, saying; "The update is not applicable to your computer".
Then I followed the instructions available on the same page, but there in Turn windows feature
on or off's list in the Control panel, the
Remote Server Administration Tools option is not available. After that I have updated the OS completely, from Windows update option on the Control panel, but the problem is still exist. So therefore I need help regarding this matter in order to solve
this unexpected problem, that I am currently facing.
Thank you .
Abdur Rahman

if youre using win 8.1 you have to install this one
http://www.microsoft.com/en-us/download/details.aspx?id=39296
Darshana Jayathilake

Server Administration Tools for Windows 8

I've been trying to download/install Server Administration Tools for Windows 8 on my Win8 RTM box. regardless of what version of Server Admin tools I try to install I get the same error:
I've been getting the download from
http://www.microsoft.com/en-us/download/details.aspx?id=28972
I've also tried
http://www.microsoft.com/en-us/download/details.aspx?id=7887
Any suggestions? I know this is quite vague, which is why I don't know how to go about figuring it out, so if you have any leading questions please feel free to ask!
Thank you.

Nope, I'm afraid the link on the blog you posted is broken, get the 'page not found' message
We
are sorry, the page you requested cannot be found.
The
URL may be misspelled or the page you're looking for is no longer available.
We
are sorry, the page you requested cannot be found.
The
URL may be misspelled or the page you're looking for is no longer available.

Unable to create a clustered VM using Remote Server Administration Tools - Failover Cluster Manager

Hi
I am using two Hyper-V Server 2012 R2 and a single WS2012 Datacenter Edition with GUI Interface for management purpose.
I have installed Failover Clustering feature on these two Hyper-V servers and remote server administration tools for Failover Clustering on WS2012 DC Edition with GUI.
I have created cluster using powershell cmdlets on Hyper-V server because I was unable to create a cluster using RSAT-Failover Clustering (May be some privileges issues).
The problem is " I am still not able to create a Hyper-VM using Failover Cluster Manager on WS2012 DC Edition server". It gives me an error "Invalid operation"
Any Help regarding this issue will be very appreciated.
Thanks in Advance.....
Abhinav | MCTS-Server Virtualization

Thanks Tim for your response but atleast I should be able to create and configure VMs for high availability.
I think this is not the issue which I am facing. It gives me an error "invalid class". There is something missing.
Please check and let me know if it can be solved. Any help will be really appreciated.
Thanks in advance.
Abhinav | MCTS-Server Virtualization

Upgrade to Windows 8.1 Pro from Windows 8 Pro causing issues with Remote Server Administration Tools

Last night I received the Windows 8.1 update and it has caused Remote Server Administration Tools to stop working. I tried to reinstall the tools using Windows8.1-KB2693643-x64.msu but get the following error:
Windows Update Standalone Installer
Installer encountered an error: 0x8007000d
The data is invalid.
In the event log I have the following error
Windows update could not be installed because of error 2147942413 "The data is invalid." (Command line: ""C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu" ")
System
Provider
[ Name]
Microsoft-Windows-WUSA
[ Guid]
{09608C12-C1DA-4104-A6FE-B959CF57560A}
EventID
3
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-11-05T12:14:18.035865000Z
EventRecordID
1562
Correlation
Execution
[ ProcessID]
5224
[ ThreadID]
5132
Channel
Setup
Computer
removed
Security
[ UserID]
S-1-5-21-1644491937-764733703-854245398-1794
EventData
UpdateTitle
ErrorCode
2147942413
ErrorString
The data is invalid.
CommandLine
"C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu"
I did have the Remote Server Administration Tools installed previously when I was running windows 8 pro and everything was fine. I've tried to remove the older version but according to the below it isn't even installed and Remote Server Administration
Tools doesn't appear in Turn Windows features on or off.
c:\RSAT>dism /online /Get-Packages
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 24/09/2014 06:33
Package Identity : Microsoft-Windows-Embedded-EmbeddedLockdown-Package-TopLevel~31bf3856ad364e35~amd64~~7.3.9600.17116
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 14:46
Package Identity : Package_for_KB2891214~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2902816~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2920189~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931358~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931366~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2934018~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939153~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2950153~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2954879~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2955164~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2956575~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958262~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958263~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959626~31bf3856ad364e35~amd64~~6.3.3.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2961072~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962140~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962872~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2964718~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965142~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965500~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966407~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966870~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2967162~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2968296~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2968599~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2969817~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971203~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971850~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2972103~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2972280~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973201~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973351~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2974008~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2975061~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 07:11
Package Identity : Package_for_KB2975719~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2976978~31bf3856ad364e35~amd64~~6.3.2.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2977292~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2978041~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979573~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979582~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2980654~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2987107~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2989542~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2990532~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2993651~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2998174~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000061~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000869~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000988~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
The operation completed successfully.
Any help on this issue would be appreciated, if you need any further information please let me know.
Thanks

SeniorInternet,
I’ve seen this issue in the past and it occurred because the file was corrupted.
It’s possible that something went wrong when downloading it originally on your newly upgraded machine.
Try downloading
KB2693643 again from another machine and install it.
Hope this helps!
Mike
Windows Outreach Team – IT Pro
Windows for IT Pros on TechNet

Can't enable Remote Server Administration Tools

I have seen many people around the net having what seems to be this issue, but there are a few nuances that differ in my particular situation.
I have 2 'Windows 7 Sp1' machines on an AD domain. Functional level is 2003.
I downloaded and installed "Windows6.1-KB958830-x64-RefreshPkg.msu" on both PCs and the installation seemed to finish without errors, but when I go to enable the features it throws the error: "An error occurred, not all the features were successfully
changed."
I came across a solution that claimed I needed to reinstall the KB, I did so to no avail. I thought perhaps my download might be corrupt, so on the 2nd machine I downloaded directly to that PC, but got the same behavior.
I doubt that it is Group Policy related, because other machines (although they're XP) are in the same OUs as these machines and can run the admin tools. <Users are members of a Help Desk & frequently reset certain users' passwords.>
I'm not sure what to do next, especially since both of these computers are acting the same way.
# When I wrote this script only God & I knew what I was doing. # Now, only God Knows!
Don't retire technet
http://social.technet.microsoft.com/Forums/en-US/e5d501af-d4ea-4c0f-97c0-dfcef0192888/dont-retire-technet?forum=tnfeedback

Hi,
Please go to event log to check more information about this operation, you could find something under Windows Logs---Setup log.
According to your description, I suspect there would be some common issue existed in your both Windows 7 computers. Just boot into clean boot mode to check if you can turn on Remote Server Administration Tools components. This will avoid the software conflicts
during configuration.
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Installing administrative tools for Windows 10 Technical Preview for Enterprise

At first I was upgrade my Windows 8.1 to Windows 10 Technical Preview for Enterprise every things done will then
I try to install administrative tools for windows 10 technical preview for enterprise I found the .msu file from Microsoft website but when I tried to install it, it gives me the following error:
Windows Update Standalone Installer
installer encountered and error: 0x8024001d
is there anyone to help me regarding above issue.
Thanks
Zelgay Kunari

Hi zelgay,
This is my result:
From your error code, it seems this is relate to your windows update, please use following command to fix corrupted files:
DISM.exe /Online /Cleanup-image /Restorehealth
In the meantime, you can delete temporary update files in the SoftwareDistribution folder:
Stop Windows Update service.
Open File Explorer.
Double-click the local hard disk where Windows is installed, typically drive C.
Double-click the Windows folder, and then double-click the
SoftwareDistribution folder.
Double-click the DataStore folder to open it, and then delete all files and folders in the folder.
Note If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Back button. In the SoftwareDistribution folder, double-click the
Download folder to open it, and then delete all files in the folder.
Restart Windows Update service.
Alex Zhao
TechNet Community Support

DHCPMGMT.MSC in Remote Server Administration Tools (RSAT) won't remember DHCP server

I'm running Remote Server Administration Tools (RSAT) on Windows 7 Professional 64-bit and I've noticed that when I run the DHCP Management tool (DHCPMGMT.MSC) and I add our DHCP Authorised server then close the console, it forgets the DHCP server and I
have to re-select it next time I use the console.
On the other hand, the DNS console remembers that I've used a particular DNS server even after I close the console.
Wondering why the DHCP Management console is so forgetful?

Where there's a will there's a way. Here's what I did because it annoyed me so much to have to re-add the server each time.
1. Open the DHCP Managment console in author mode using the following command:
mmc /a c:\windows\system32\dhcpmgmt.msc
2. Add the server(s) you want to see
3. Click File > Save As...
4. Save the .msc console in the c:\windows\system32\ folder with a unique name like dhcpmgmt2.msc (don't use the old name: dhcpmgmt.msc)
5. Edit your adminstrative menu shortcut by:
       a. Browsing to Control Panel >
Administrative Tools (you may have to change the view to small icons to see all items).
       b. Right click on DHCP > Choose
Properties
       c. Change the Target to:
%windir%\system32\dhcpmgmt2.msc
(be sure you point it at whatever you named the new DHCP console my example was dhcpmgmt2.msc)
Cheers-
Josh

Remote Server Administration Tools Win7 to Svr20212R2

Can be done, and works. Functionality is reduced, however. See—http://community.spiceworks.com/topic/439904-windows-7-remote-server-administration-toolkit-rsat

I was wondering, is it possible to use Remote Server Administration Tools to access a server running Windows Server 2012 R2 on Windows 7 Pro? Last I heard it was NOT possible. If not, is there anyway to do it another way other than RD? I would like to administer my server from my computer rather than using the KVM or RD. Thanks!
This topic first appeared in the Spiceworks Community

Deployment as command for Enable Remote Server Administration Tools keeps failing

trying to deploy cmd /c EnableFeatures.cmd with following commands in file
dism /online /enable-feature /featurename:RemoteServerAdministrationTools
dism /online /enable-feature /featurename:RemoteServerAdministrationTools-Roles
dism /online /enable-feature /featurename:RemoteServerAdministrationTools-Roles-AD
dism /online /enable-feature /featurename:RemoteServerAdministrationTools-Roles-AD-DS
dism /online /enable-feature /featurename:RemoteServerAdministrationTools-Roles-AD-DS-SnapIns
it fails with error 740 Elevated permissions are required to run DISM
I am deploying program with option Run with Administrative Rights under Environment Tab of program properties
Help..
Reviewed logs and found errors
DISM   DISM Package Manager: PID=3200 Unknown features were specified on the command-line. - CPackageManagerCLIHandler::Private_GetFeaturesFromCommandLine(hr:0x800f080c)
DISM   DISM Package Manager: PID=3200 Failed to get the Feature List from the command line. - CPackageManagerCLIHandler::Private_ProcessFeatureChange
DISM   DISM Package Manager: PID=3200 Failed while processing command enable-feature. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x800f080c)
If I run .cmd file from SCCM client as administrator it works, but I have to push in environment for hundreds of machines and somehow its not running with elevated administrator rights..
Spend lot of time but getting nowhere..
I would greatly appreciate if anybody could provide me any clues
Same commands worked before for Windows 732bit machine but not it fails on x32 and x64 bit both.

Thank for quick reply, I have already deployed RSAT successfully
I installed PSTools on test machine and
Used "psexec -i -s cmd" to open a cmd in system context manually and copied .bat script to c:\windows\system32 and run from command prompt, it works fine on test machine..
But how would I implement it using SCCM because our client machines doesn't have pstools?
Please provide more details Torsen I haven't deployed apps using psexec so far..
RJ
There's no need to "deploy" using psexec - use psexec as a method to verify the scripts/commands are valid and functional when executed in the LocalSystem context (because LocalSystem context is exactly what ConfigMgr is using when you tick "run
as admin").
So, that worked.
How are you packaging/launching this via ConfigMgr?
Are you using "package" ?
Are you using "run command line" ?
Or AppModel/Application ?
Maybe, you are using run-command-line, or package-without-source - if so, I guess that your script is trying to run from UNC off the DP and this is what DISM is objecting to?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Installing Exchange Server 2010 tools on windows 8.1

Hi Guys I'm busy installing Exchange 2010 console on my local machine but no luck.
I've added the necessary tools that are needed to install the console.
When Installing it gives me the error below.
Can anyone assist on the matter.

Open Regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
Delete this key under Session Manager "PendingFileRenameOperations". Restart the installation and it will work fine.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Unable to install iTunes 11.1.1 for windows 8

I have downloaded the latest iTunes version 11.1.1 for windows 8 but it just won't install the software,I think I will wait for windows 8.1 to solve the problem

The iTunes installer seems to function completely fine until the status bar is full and then nothing happens. It stays that way until you manually cancel the upload. If you attempt to restart the installer it says that it is already in process and won't allow you to restart it. I've tried a couple times and it's always the same. I went to my computer and manualy ended the installer process and was able to restart the install but it paused at the same point.

Windows 10 Remote Server Administration Tools (RSAT)

No offense, but the same question is 5 posts down and even has RSAT in the subject. I've lost count on the number of times this has been asked today

I've got Windows 10 installed, but no access to RSAT. Has anyone else had any success installing this? It tried to install the tools that came out for the Jan. Tech preview build. Those appear to be the latest, but I've got nothing.
This topic first appeared in the Spiceworks Community

Windows 10 RSAT (Remote Server Administration Tools)

Rich5600 wrote:
You are correct, I didn't scour them enough, it's been hard to go through so many relating to the technical preview I guess I got a little lazy.
I hear ya there. With the Win10 release, it's been rather busy for sure.

Has anyone received any information on when RSAT for the final release of Windows 10 will be available? I have scoured everywhere, not seeing when this might be released. I am eager to get all testing done and rollout to a couple of users for further testing before rolling it out to everyone.
This topic first appeared in the Spiceworks Community

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Similar Messages

Maybe you are looking for