Unable to install software, it stopped almost at end and even didn´t asked for connecting USB.
product name: HP Photosmart all-in-one B010a
operation system: windows 7 64-bit
I was unable to install product, it didn´t asked me connect usb, and stopped almost at the end. I tried solve the problem with HP installation error - windows 7. I installed updates and so on, but in middle of new installing it wrote fatal error.
Hi b ,
Thanks for your response.
There were no accounts in my local security settings so I added SERVICE;Ron and it recognised them both .
To update , I decided to reboot and try the install one more time and Quicktime and itunes installed successfully , ipod appeared to but when I connect my nano I get an error message that the software didn't install correctly . I uninstalled it and reinstalled , ran ipod updater but it's still the same . When I plug in my nano itunes doesn't recognise it and I keep getting a message on my taskbar telling me that this device will run better in a USB 2.0 port but that's what I'm using !!?? . Any ideas ? .
T.I.A. Ron
Similar Messages
-
Unable to install software/Admin or higher permissions required for install
Suddenly, I am unable to install software—I get a dialogue box that tells me I must have Administrator or higher permissions to do the install. I am attempting to do this from the Administrator account, and I even created a new one to see if that would work, all to no avail. Any tips, ideas, suggestions to resolve this problem? I would really like to install Leopard. Thanks!
Hi flow_pilot, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Install Software Updates Step fails during Build and Capture
I have run into a problem while attempting to use the Install Software Update task during a build and capture task sequence. I have MDT 2012U1 integrated into SCCM 2012.
The Install Software steps find and use the Deployment Points fine and the Use Toolkit steps similarly are able to download their source files from the distribution points using the Network Access account. The Install Software Updates step, however
fails with an access denied error in the CAS.log.
I have found that I can work around this problem by setting the DP to allow anonymous access. After checking this box, the software updates install during the build and capture task sequence. Unchecking the Allow anoymous makes the problem recur.
I would like to not have to have the "allow anonymous access" enabled on the DPs for obvious reasons. Other packages download correctly from the DP with anonymous access disabled - they use the network access account. Install Software Updates
is the only step that seems unable to use that account to talk with the DP.
Is this a known issue? Is there a work around?Thanks for the information. I will give that a try. I do have the SMSMP & SMSSLP (not sure I need this one in 2012) filled in in the Configmgr client install settings. Before I did that, it couldn't even find the SUP.
I am a little skeptical that the hotfix will fix my problem since most packages are downloading from the DP fine - it is only Software Updates that are failing to download. On the other hand, it is clearly a permissions issue since allowing anonymous
on the DP resolves the issue, all be it in a way I am uncomfortable maintaining in the long run.
That KB replaces a lot of key Windows system files. Hopefully, it won't cause more problems than it solves.
---additional thought
I wonder, could it be that Packages that work without this KB have package share settings with "Copy the content in this package to a packages share on Distribution Points" cleared/unchecked? This setting is not available for patch packages
- so I wonder if it is enabled by default behind the scenes. That could explain why the patch packages are affected and not the other regular application packages I have are not. All my regular packages so far do not have the
"Copy the content" box checked. Clients would be accessing the packages differently I suppose based on whether it was through a packages share or through the new SCCM 2012 package storage thing with the hashing. -
I tried to install icloud on my windows 8 touch PC and it stops at the end and says Error? Any Ideas what is wrong?
This is all I could find: http://support.microsoft.com/kb/2643995
-
If I sign up for creative cloud will I be able to install software on multiple computers (ie work and home)?
You are allowed to have two working installations.
-
downloaded Mountain Lion OS X ...but is not installing . gets stuck at last 9 mins and shows error. Asking to contact software provider. how to complete installation ?
P.S. The order status in the app shop says - complete - but no download option anywhere.
And when my computer wants to reinstall mountain lion - it says, that this ID did not purchse Lion
What is this supposed to mean? I have to purchase Lion OS as well? or it means mountain lion by this message, but just doesnt see, that my account bought it? -
I have the iPhone 4S and I cannot get my apps to download. I will click free then install and then it will ask for my password. Once I enter my password correctly it will verify my password an then it won't do anything. what should I do?
I just went through this same process.... I changed my credit card, double checked billing info, changed my password, I restored my phone, but the misake I made was I kept restoring it from my back up.... Finally I went to Apple Store.. and sad to say that you have to do a restore, and DO NOT restore from back up.
I used Gmail so I didnt loose contacts or email.. but I did loose all my text messages and history of that.
So, I had the EXACT same problem and it was a software issue.. you have to restore your phone to factory settings and start all over.. BLOWS I know! -
After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?
Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.
-
I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?
Hi Tom
Thanks for replying!
I had heard that these switches didn't stack unless everything was identical.
I only tried it at all out of pure desperation.
I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
They either never come up properly receiving decompression errors and reboot constantly in a loop.
Occasionally they stall / jam and stay there displaying the same error with no rebooting.
And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
But as soon as I made a change it crashed and started the rebooting cycle again. -
Uploading newer ios on Ipad 2 - things were going well then got a picture of the apple logo and a line moving from start to end - stopped short of end and can't do anything now - HELP
Try a soft-reset and see if that gets it to boot up properly : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should reappear and it will hopefully boot up.
If it doesn't then try recovery mode and restore/resync your content : If you can't update or restore your iPhone, iPad, or iPod touch -
i cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop
I read a way on another forum to fix this problem. Right click on the setup.exe and select "Run as administrator" this should solve your problem.
-
I'm unable to download apps from phone when I got into App Store, it asks for my password but never downloads, I have to hook up to computer to download apps to my phone
Have you tried turning your phone completely off and then back on? After trying that you might want to Reset your phone by depressing the Sleep Button and the Home Button at the same time for at least 15 Seconds. Then try your App Download again. If those efforts don't work there are additional threads about various App Download issues you will want to review.
-
I am trying to update software on phone and I am being asked for a passcode which I've never had set up before I am confused
You didn't have a passcode to unlock your iPhone when you turned it on?
-
I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?
I fixed it!!
While not connected to any USB cable I put the iPad in recovery mode.
To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new. -
Since starting a new user account, unable to install software
I had some problems with ColorSync not working correctly in my normal account, so I created a new admin account and started over from scratch in that one. I've had a whole lot of problems with permissions or privileges or something, and have been battling one demon after another. Right now I am unable to reinstall a simple pair of Canon applications from a very recent CD (DPP and EOS Utility). I get an "error = 6" message from the Canon installer.
I've tried fixing permissions repeatedly from the Leopard start-up CD. It works, but it always seems to find the same list of files to repair, as if they didn't really get repaired. Repair Disk found no problems. I've dumped everything I can find regarding Canon, both in my applications folder and also in Preferences and Library/Application Support. But no matter what, I get that error 6, and the installer fails.
I should note that I had both of these applications up and running just fine in the old account.
Help!For starters, it seems like your problems are with third-party apps, and this is a forum for Apple and Apple software. Have you contacted the third-party developers or checked their websites for updates or information?
Second, the list of "permissions differ" is normal and can be ignored:
http://support.apple.com/kb/TS1448
Maybe you are looking for
-
Image down to a Surface Pro with Windows 8.1 Enterprise use PXE fails at Driver Pack Install
I am using SCCM 2012 SP1 running on windows server 2008 R2 deploying to windows Surface Pro, I am deploying Windows 8.1 Enterprise using PXE. It gets the pxe response, formats the HD, deploys the image, downloads the driver package, but when it insta
-
Change DB_NAME failed with NID-00133: Database should have only consistent.
I have created two testing database for active data guard with Oracle 11g on Linux. I created standby DB by using rman backup from primary database. Now I want to change DB_NAME of standby database. I used DBNEWID utility %> nid TARGET=SYS DBNAME=new
-
I am trying to include one xsl file in another. When I do this, I get the error: "oracle.xml.parser.v2xslexception: xsl-1002: Error while processing xsl file (no protocol tabledef.xsl" - where tabledef.xsl is the name of the xsl file I am trying to i
-
I have a new iPad3g which I have synced to my iMac G5. I have elected to sync photos from my Aperture. When I touch the photo icon I get the message "Please Wait Updating Library" accompanied by the spinning wheel. The problems is it never updates an
-
Why Here must add a Catch Block ??
import java.io.*; public class C{ public void test(){ try{ System.out.println("print in try"); throw new FileNotFoundException(); }catch(FileNotFoundException e){ System.out.printl